# changelog

author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.102-1
changelog:
  - Fix missing build dependency for scripts subdir in Makefile.
  - Fix node up/down handling in clvmd corosync module.
  - Fix 3-thread clvmd deadlock triggered by cleanup on EOF from client.
  - Remove VG from lvmetad before restoring it with vgcfgrestore.
  - Add devtypes report command to display built-in recognised block device types.
  - Fix CC Makefile override which had reverted to using built-in value. (2.02.75)
  - Recognise bcache block devices in filter (experimental).
  - Run lvm2-activation-net after lvm2-activation service to prevent parallel run.
  - Add man page entries for lvmdump's -u and -l options.
  - Fix lvm2app segfault while using lvm_list_pvs_free fn if there are no PVs.
  - Improve of clvmd singlenode locking simulation.
  - lvconvert no longer converts LVs of "mirror" segment type to thinpool.
  - lvconvert no longer converts thinpool sub-LVs to "mirror" segment type.
  - Direct udev to use 3min timeout for LVM devices. Recent udev has default 30s.
  - Do not scan multipath or RAID components and avoid incorrect autoactivation.
  - Fix MD/loop udev handling to fire autoactivation after setup or coldplug only.
  - Make RAID capable of single-machine exclusive operations in a cluster.
  - Drop calculation of read ahead for deactivated volume.
  - Check for exactly one lv segment in validation of thin pools and volumes.
  - Fix dmeventd unmonitoring of thin pools.
  - Fix lvresize for stacked thin pool volumes (i.e. mirrors).
  - Write Completed debug message before reinstating log defaults after command.
  - Refresh existing VG before autoactivation (event retrigger/device reappeared).
  - Use pvscan -b in udev rules to avoid a deadlock on udev process count limit.
  - Add pvscan -b/--background for the command to be processed in the background.
  - Don't assume stdin file descriptor is readable.
  - Avoid unlimited recursion when creating dtree containing inactive pvmove LV.
  - Require exactly 3 arguments for lvm2-activation-generator. Remove defaults.
  - Inform lvmetad about any lost PV label to make it in sync with system state.
  - Support most of lvchange operations on stacked thin pool meta/data LVs.
  - Enable non-clustered pvmove of snapshots and snapshot origins.
  - Add ability to pvmove non-clustered RAID, mirror, and thin volumes.
  - Make lvm2-activation-generator silent unless it's in error state.
  - Remove "mpath major is not dm major" msg for mpath component scan (2.02.94).
  - Prevent cluster mirror logs from being corrupted by redundant checkpoints.
  - Fix ignored lvmetad update on loop device configuration (2.02.99).
  - Use LVM_PATH instead of hardcoded value in lvm2 activation systemd generator.
  - Fix vgck to notice on-disk corruption even if lvmetad is used.
  - Move mpath device filter before partitioned filter (which opens devices).
  - Require confirmation for vgchange -c when no VGs listed explicitly.
  - Also skip /var and /var/log by default in blkdeactivate when unmounting.
  - Add support for bind mounts in blkdeactivate.
  - Add blkdeactivate -v/--verbose for debug output from external tools used.
  - Add blkdeactivate -e/--errors for error messages from external tools used.
  - Suppress messages from external tools called in blkdeactivate by default.
  - Fix inability to remove a VG's cluster flag if it contains a mirror.
  - Fix bug making lvchange unable to change recovery rate for RAID.
  - Prohibit conversion of thin pool to external origin.
  - Workaround gcc v4.8 -O2 bug causing failures if config/checks=1 (32bit arch).
  - Verify clvmd message validity before processing and log error if incorrect.
  - When creating PV on existing LV don't forbid reserved LV names on LVs below.
  - When converting mirrors, default segtype should be the same unless specified.
  - Make "raid1" the default mirror segment type.
  - Fix clogd descriptor leak when daemonizing.
  - Fix clvmd descriptor leak on restart.
  - Add pipe_open/close() to use instead of less efficient/secure popen().
  - Inherit and apply any profile attached to a VG if creating new thin pool.
  - Ignore previous LV seg with alloc contiguous & cling when num stripes varies.
  - Set use_lvmetad=0 on lvmconf --enable-cluster, reset to default on --disable-cluster.
  - Tidy dmeventd fifo initialisation.
  - Detect invalid sector supplied to 'dmsetup message'.
  - Free any previously-set string if a dm_task_set_* function is called again.
  - Do not allow passing empty new name for dmsetup rename.
  - Display any output returned by 'dmsetup message'.
  - Add dm_task_get_message_response to libdevmapper.
  - Create dmeventd timeout threads as "detached" so exit status is freed.
  - Add DM_ABORT_ON_INTERNAL_ERRORS env var support to abort on internal errors.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-1
changelog:
  - Fix possible race during daemon worker thread creation (lvmetad).
  - Fix possible deadlock while clearing lvmetad cache for full rescan.
  - Fix possible race while creating/destroying memory pools.
  - Fix failing metadata repair when lvmetad is used.
  - Fix incorrect memory handling when reading messages from lvmetad.
  - Fix locking in lvmetad when handling the PV which is gone.
  - Run full scan before vgrename operation to avoid any cache name collision.
  - Recognize new flag to skip udev scanning in udev rules and act appropriately.
  - Add support for flagging an LV to skip udev scanning during activation.
  - Improve message when unable to change discards setting on active thin pool.
  - Fix lvconvert when converting to a thin pool and thin LV at once.
  - Ensure vgid matches before removing vgname entry from lvmetad cache.
  - Add --ignoreskippedcluster for exit status success when clustered VGs skipped.
  - Fix 3 minute udev timeout so that it is applied for all LVM volumes.
  - Fix thin/raid & activation config defaults with configure --disable-devmapper.
  - Fix RAID calculation for sufficient allocatable space.
  - lvconvert from linear to mirror or RAID1 now honors mirror_segtype_default.
  - Add thin-performance configuration profile.
  - Add lvm.conf allocation/thin_pool_chunk_size_policy option.
  - Fix contiguous & cling allocation policies for parity RAID.  (2.02.100)
  - Have lvmconf --enable/disable-cluster reset/set use_lvmetad.
  - Add seg_size_pe field to reports.
  - Support start+length notation with command line PE ranges.
  - Exit cleanly with message when pvmove cannot restart because LV is inactive.
  - Define symbolic names for subsystem udev flags in libdevmapper for easier use.
  - Make subsystem udev rules responsible for importing DM_SUBSYSTEM_UDEV_FLAG*.
  - Start using a distinct Epoch number in pkg version for major RHEL release.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-3
changelog:
  - Add configure --enable-udev-systemd-background-jobs.
  - Add lvm2-pvscan@.service to run pvscan as a service for lvmetad/autoactivation.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-4
changelog:
  - Add dev-block-<major>:<minor>.device systemd alias for complete PV tracking.
  - Use major:minor as short form of --major and --minor arg for pvscan --cache.
  - Fix lvconvert swap of poolmetadata volume for active thin pool.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-5
changelog:
  - Fix missing lvmetad scan for PVs found on MD partitions.
  - Add internal flag for temporary LVs to properly direct udev to not interfere.
  - Respect DM_UDEV_DISABLE_OTHER_RULES_FLAG in lvmetad udev rules.
  - Workaround VG refresh race during autoactivation by retrying the refresh.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.103-8
changelog:
  - Use major:minor in lvm2-pvscan@.service for proper global_filter application.
  - Fix SYSTEMD_READY assignment for foreign devices in lvmetad udev rules.
  - Handle failures in temporary mirror used when adding images to mirrors.
  - Compile/link executables with new RELRO and PIE options (non-static builds).
  - Replace hardcoded sbin dir value with rpm variable for clvmd and cmirrord.
  - Install all binary executables with 0555 permissions.
  - Configure with --enable-write_install for writeable executables
    during rpm processing of debug info.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.103-11
changelog:
  - Do not drop SYSTEMD_READY for non-activating events (LVM on MD or loop).
  - Add missing AC_TRY_CCFLAG defined in acinclude.m4 for configuration checks.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-1
changelog:
  - Online thin pool metadata resize requires 1.10 kernel thin pool target.
  - Fix thin LV flagging for udev to skip scanning only if the LV is wiped.
  - Replace use of xfs_check with xfs_repair in fsadm.
  - Mark lvm1 format metadata as FMT_OBSOLETE. Do not use it with lvmetad.
  - Invalidate cached VG struct after a PV in it gets orphaned. (2.02.87)
  - Mark pool format metadata as FMT_OBSOLETE.
  - Syntax and spelling fixes in some man pages.
  - Dependency scan counts with snapshots and external origins.
  - Make sure VG extent size is always greater or equal to PV phys. block size.
  - Optimize double call of stat() for cached devices.
  - Enable support for thin provisioning for default configuration.
  - Return success when inserting dirs and links into device cache.
  - Test for remote exclusive activation after activation fails.
  - Support lvconvert --merge for thin snapshots.
  - Add support to read thin device id from table line entry.
  - Extend lv_remove_single() to not print info about removed LV.
  - Replace open_count check with lv_check_not_in_use() for snapshot open test.
  - Add error messages with LV names for failing lv refresh.
  - Add --splitsnapshot to lvconvert to separate out cow LV.
  - Reinstate origin reload to complete lvconvert -s with active LVs. (2.02.98)
  - Select only active volume groups if vgdisplay -A is used.
  - Add -p and LVM_LVMETAD_PID env var to lvmetad to change pid file.
  - Allow lvmetad to reuse stale socket.
  - Only unlink lvmetad socket on error if created by the same process.
  - Append missing newline to lvmetad missing socket path error message.
  - Check for non-zero aligment in _text_pv_add_metadata_area() to not div by 0.
  - Add allocation/use_blkid_wiping to lvm.conf to enable blkid wiping.
  - Enable blkid_wiping by default if the blkid library is present.
  - Add configure --disable-blkid_wiping to disable libblkid signature detection.
  - Add -W/--wipesignatures lvcreate option to support wiping on new LVs.
  - Add allocation/wipe_signatures_when_zeroing_new_lvs to lvm.conf.
  - Do not connect to lvmetad on vg/lvchange --sysinit -aay and socket absent.
  - Use lv_check_not_in_use() when testing device in use before merging.
  - Check for failure of lvmcache_add_mda() when writing pv.
  - Check for failure of dev_get_size() when reporting device size.
  - Drop extra unneeded '/' when scanning sysfs directory.
  - Fix undef value if skipped clustered VG ignored for toollib PV seg. (2.02.103)
  - Support validation of VG/LV names in liblvm/python.
  - Allow creation of PVs with arguments to liblvm/python.
  - Ensure sufficient metadata copies retained in liblvm/python vgreduce.
  - Fix installation of profiles from conf subdir when not building in srcdir.
  - Show UUIDs for missing PVs in reports.
  - Add reporting of thin_id device id for thin volumes.
  - Fix reporting of empty numerical values for recently-added fields.
  - Use _field_set_percent/value in reporting code.
  - Return success when LV cannot be activated because of volume_list filter.
  - Return proper error state for remote exclusive activation.
  - Fix clvmd message verification to not reject REMOTE flag. (2.02.100)
  - Compare equality of double values with DBL_EPSILON predefined constant.
  - Use additional gcc warning flags by default.
  - Add ignore_lvm_mirrors to config file to read/ignore labels on mirrors.
  - Fix endless loop in blkdeactivate <device>... if unable to umount/deactivate.
  - Remove 2>/dev/null from three lvm commands executed by vgimportclone.
  - Check for open count with a timeout before removal/deactivation of an LV.
  - Report RAID images split with tracking as out-of-sync ("I").
  - Add workaround for deactivation problem of opened virtual snapshot.
  - Disable unsupported merge for virtual snapshot.
  - Revert activation of activated nodes if a node preload callback fails.
  - Avoid busy looping on CPU when dmeventd reads event DM_WAIT_RETRY.
  - Ensure global mutex is held when working with dmeventd thread.
  - Drop taking timeout mutex for un/registering dmeventd monitor.
  - Allow section names in config file data to be quoted strings.
  - Close fifos before exiting in dmeventd restart() error path.
  - Catch invalid use of string sort values when reporting numerical fields.
  - Consistently report on stderr when device is not found for dmsetup info.
  - Skip race errors when non-udev dmsetup build runs on udev-enabled system.
  - Skip error message when holders are not present in sysfs.
  - Require libpthread to build now.
  - Add BuildRequires: libblkid-devel for blkid wiping functionality.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-3
changelog:
  - Drop obsolete multipath rules from 10-dm.rules.
  - Drop cryptsetup rules from 10-dm.rules - cryptsetup >= 1.1.3 sets them.
  - Avoid trying to convert single to thin pool and volume at the same time.
  - Detect thin feature external_origin_extend and limit extend when missing.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-4
changelog:
  - Fix unwanted drop of hold flocks on forked children.
  - Fix merging of old snapshot into thin volume origin.
  - Exit dmeventd with pidfile cleanup instead of raising SIGKILL on DIE request.
  - Add new DM_EVENT_GET_PARAMETERS request to dmeventd protocol.
  - Do not use systemd's reload for dmeventd restart, use dmeventd -R instead.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-5
changelog:
  - Avoid a PV label scan while in a critical section.
  - Add Requires: resource-agents to lvm2-cluster and cmirror subpackage.
  - Add new lvm2-cluster-standalone and cmirror-standalone subpackages.
  - Add systemd native service for clvmd, cmirrord and clustered LV activation.
  - Move obsolete clvmd/cmirrord initscripts to lvm2-sysvinit subpackage.
  - Use --ignoreskippedcluster in lvm2-monitor initscript/systemd unit.
  - Use --ignoreskippedcluster in activation systemd units if use_lvmetad=0.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-6
changelog:
  - Add initial support for LVM cache and cachepool segment types.
  - Include various bug fixes from upcoming lvm2 v2.02.106 release
    detailed in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-10
changelog:
  - Fix cache consistency in lvmetad when PV moves around.
  - Fix memleak when lvmetad discovers PV to appear on another device.
  - Fix invalid memory read in lvmetad that could cause a deadlock.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-12
changelog:
  - Do not try to check empty pool with scheduled messages.
  - Fix return value in pool_has_message() when quering for any message.
  - Fix dmeventd logging with parallel wait event processing.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-13
changelog:
  - Use VG read lock during 'pvscan --cache -aay' autoactivation.
  - Issue a VG refresh before autoactivation only if the PV has changed/is new.
  - Add flag to lvmetad protocol to indicate the PV scanned has changed/is new.
  - Also add vgname to lvmetad protocol when referencing VGs for PVs scanned.
  - Use correct PATH_MAX for locking dir path.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-14
changelog:
  - Increase wait time for finishing initial lvmetad scan that's run in parallel.
  - Reinitialise lvmcache properly on fork to fix polldaemon exiting prematurely.
  - Add more cleanup for stray "cpg_dispatch_failed" cmirror messages.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.111-1
changelog:
  - Update to latest upstream release with various fixes and
    enhancements documented in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.113-1
changelog:
  - Fix missing rounding to 64KB when estimating optimal thin pool chunk size.
  - Fix size in pvresize "Resizing to ..." verbose msg to show proper result size.
  - Add --cachepolicy and --cachesettings options to lvchange.
  - Validate that converted volume and specified pool volume differ in lvconvert.
  - Fix regression in vgscan --mknodes usage (2.02.112).
  - Respect --prefix when setting CLMVD_PATH configure (2.02.89).
  - Default to configure --enable-udev-systemd-background-jobs for systemd>=205.
  - Fix ignore_vg() to properly react on various vg_read errors (2.02.112).
  - Failed recovery returns FAILED_RECOVERY status flag for vg_read().
  - Exit with non-zero status code when pvck encounters a problem.
  - Fix clean_tree after activation/resume for cache target (2.02.112).
  - Fix memory corruption with sorting empty string lists (1.02.86).
  - Fix man dmsetup.8 syntax warning of Groff
  - Accept unquoted strings and / in place of {} when parsing configs.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-2
changelog:
  - Release socket in daemon_close and protocol string in daemon_open error path.
  - Add --cachepolicy and --cachesettings to lvcreate.
  - Fix regression when parsing /dev/mapper dir (2.02.112).
  - Fix typo in clvmd initscript causing CLVMD_STOP_TIMEOUT var to be ignored.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-3
changelog:
  - Add cache_policy and cache_settings reporting fields.
  - Add missing recognition for --binary option with {pv,vg,lv}display -C.
  - Fix vgimportclone to notify lvmetad about changes done if lvmetad is used.
  - Fix vgimportclone to properly override config if it is missing in lvm.conf.
  - Fix automatic use of configure --enable-udev-systemd-background-jobs.
  - Correctly rename active split LV with -splitmirrors for raid1.
  - Still restrict mirror region size to power of 2 when VG extent size is not.
  - Fix segfault while using selection with regex and unbuffered reporting.
  - Remove unimplemented dm_report_set_output_selection from libdevmapper.h.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-4
changelog:
  - Fix incorrect rimage names when converting from mirror to raid1 LV (2.02.112).
  - Avoid excessive re-reading of metadata and related error messages in pvremove.
  - Check for cmirror availability during cluster mirror creation and activation.
  - Fix possible segfault when using cache_policy and cache_settings fields.
  - Fix reserved values recognition for cache_policy and cache_settings fields.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-5
changelog:
  - Report lv_health_status and health attribute also for thin pool.
  - Add lv_error_when_full reporting field.
  - Add support for lvcreate --errorwhenfull y|n for thin pools.
  - Report more info from thin pool status (out of data, metadata-ro, fail).
  - Support error_if_no_space for thin pool target.
  - Do not filter out snapshot origin LVs as unusable devices for an LVM stack.
  - Fix process_each_pv to match item by device not by its PV device name only.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.115-1
changelog:
  - Report segment types without monitoring support as undefined.
  - Support lvchange --errorwhenfull for thin pools.
  - Improve the processing and reporting of duplicate PVs.
  - Add support for lvcreate --errorwhenfull y|n for thin pools
  - Fix lvconvert --repair to honour resilience requirement for segmented RAID LV.
  - Also call lvscan --cache in dmeventd for mirror device update in lvmetad.
  - Filter out partitioned device-mapper devices as unsuitable for use as PVs.
  - Also notify lvmetad about filtered device if using pvscan --cache DevicePath.
  - Add report/compact_output to lvm.conf to enable/disable compact report output.
  - Rename lv_error_when_full reporting field to lv_when_full.
  - Reduce severity of ioctl error message when dmeventd waitevent is interrupted.
  - Report 'unknown version' when incompatible version numbers were not obtained.
  - Add dm_report_compact_fields to remove empty fields from report output.
  - Add BuildRequires: device-mapper-persistent-data for proper thin_check configuration.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.115-2
changelog:
  - Remove rules from 10-dm.rules which handle multipath, rules for handling
    multipath devices are directly part of device-mapper-multipath package.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.115-3
changelog:
  - Preserve chunk size with repair and metadata swap of a thin pool.
  - Fix raid --splitmirror 1 functionality (2.02.112).
  - Fix tree preload to handle splitting raid images.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.124-1
changelog:
  - Add lvm2-lockd subpackage with technical preview of lvm locking daemon.
  - Update to latest upstream release with various fixes and
    enhancements documented in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.125-1
changelog:
  - Fix getline memory usage in lvmpolld.
  - Add support --clear-needs-check-flag for cache_check of cache pool metadata.
  - Add lvmetactl for developer use only.
  - Rename global/lock_retries to lvmlockd_retries.
  - Replace --enable-lvmlockd by --enable-lockd-sanlock and --enable-lockd-dlm.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.125-2
changelog:
  - lvm2-lockd subpackage requires dlm-lib or sanlock-lib or both
    based on which support is compiled in.
  - lvm2-lockd subpackage requires dlm-lib instead of former dlm
    for lvmlockd daemon with dlm support.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.126-1
changelog:
  - Fix long option hyphen removal. (2.02.122)
  - Fix clvmd freeze if client disappears without first releasing its locks.
  - Fix lvconvert segfaults while performing snapshots merge.
  - Ignore errors during detection if use_blkid_wiping=1 and --force is used.
  - Recognise DM_ABORT_ON_INTERNAL_ERRORS env var override in lvm logging fn.
  - Fix alloc segfault when extending LV with fewer stripes than in first seg.
  - Fix handling of cache policy name.
  - Set cache policy before with the first lvm2 cache pool metadata commit.
  - Fix detection of thin-pool overprovisioning (2.02.124).
  - Fix lvmpolld segfaults on 32 bit architectures.
  - Add lvmlockd lock_args validation to vg_validate.
  - Fix ignored --startstopservices option if running lvmconf with systemd.
  - Hide sanlock LVs when processing LVs in VG unless named or --all used.
  - Introduce libdevmapper wrappers for all malloc-related functions.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.127-1
changelog:
  - Do not init filters, locking, lvmetad, lvmpolld if command doesn't use it.
  - Order fields in struct cmd_context more logically.
  - Add lock_type to lvmcache VG summary and info structs.
  - Fix regression in cache causing some PVs to bypass filters (2.02.105).
  - Make configure --enable-realtime the default now.
  - Add dmstats.8 man page.
  - Add dmstats --segments switch to create one region per device segment.
  - Add dmstats --regionid, --allregions to specify a single / all stats regions.
  - Add dmstats --allprograms for stats commands that filter by program ID.
  - Add dmstats --auxdata and --programid args to specify aux data and program ID.
  - Add report stats sub-command to provide repeating stats reports.
  - Add clear, delete, list, and print stats sub-commands.
  - Add create stats sub-command and --start, --length, --areas and --areasize.
  - Recognize 'dmstats' as an alias for 'dmsetup stats' when run with this name.
  - Add a 'stats' command to dmsetup to configure, manage and report stats data.
  - Add statistics fields to dmsetup -o.
  - Add libdm-stats library to allow management of device-mapper statistics.
  - Add --nosuffix to suppress dmsetup unit suffixes in report output.
  - Add --units to control dmsetup report field output units.
  - Add support to redisplay column headings for repeating column reports.
  - Fix report header and row resource leaks.
  - Report timestamps of ioctls with dmsetup -vvv.
  - Recognize report field name variants without any underscores too.
  - Add dmsetup --interval and --count to repeat reports at specified intervals.
  - Add dm_timestamp functions to libdevmapper.
  - Recognise vg/lv name format in dmsetup.
  - Move size display code to libdevmapper as dm_size_to_string.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.128-1
changelog:
  - Allocation setting cache_pool_cachemode is replaced by cache_mode.
  - Don't attempt to close config file that couldn't be opened.
  - Check for valid cache mode in validation of cache segment.
  - Change internal interface handling cache mode and policy.
  - When no cache policy specified, prefer smq (if available) over mq.
  - Add demo cache-mq and cache-smq profiles.
  - Add cmd profilable allocation/cache_policy,cache_settings,cache_mode.
  - Require cache_check 0.5.4 for use of --clear-needs-check-flag.
  - Fix lvmetad udev rules to not override SYSTEMD_WANTS, add the service instead.
  - Fix 'dmstats list -o all' segfault.
  - Separate dmstats statistics fields from region information fields.
  - Add interval and interval_ns fields to dmstats reports.
  - Do not include internal glibc headers in libdm-timestamp.c (1.02.104)
  - Exit immediately if no device is supplied to dmsetup wipe_table.
  - Suppress dmsetup report headings when no data is output. (1.02.104)
  - Adjust dmsetup usage/help output selection to match command invoked.
  - Fix dmsetup -o all to select correct fields in splitname report.
  - Restructure internal dmsetup argument handling across all commands.
  - Add dm_report_is_empty() to indicate there is no data awaiting output.
  - Add more arg validation for dm_tree_node_add_cache_target().
  - Add --alldevices switch to replace use of --force for stats create / delete.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.129-1
changelog:
  - Drop error message when vgdisplay encounters an exported VG. (2.02.27)
  - Fix shared library generation to stop exporting internal functions.(2.02.120)
  - Accept --cachemode with lvconvert.
  - Fix and improve reporting properties of cache-pool.
  - Enable usage of --cachepolicy and --cachesetting with lvconvert.
  - Don't allow to reduce size of thin-pool metadata.
  - Fix debug buffer overflows in cmirrord logging.
  - Add --foreground and --help to cmirrord.
  - Add 'precise' column to statistics reports.
  - Add --precise switch to 'dmstats create' to request nanosecond counters.
  - Add precise argument to dm_stats_create_region().
  - Add support to libdm-stats for precise_timestamps
  - Fix devmapper.pc pkgconfig file to declare -lrt dependency properly.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-1
changelog:
  - Fix use of uninitialized device status if reading outdated .cache record.
  - Restore support for --monitor option in lvcreate (2.02.112).
  - Read thin-pool data and metadata percent without flush.
  - Detect blocked thin-pool and avoid scanning their thin volumes.
  - Check if dm device is usable before checking its size (2.02.116).
  - Extend parsing of cache_check version in configure.
  - Make lvpoll error messages visible in lvmpolld's stderr and in syslog.
  - Add 'make install_full_man' to install all man pages regardless of config.
  - Parse thin-pool status with one single routine internally.
  - Add --histogram to select default histogram fields for list and report.
  - Add report fields for displaying latency histogram configuration and data.
  - Add dmstats --bounds to specify histogram boundaries for a new region.
  - Add dm_histogram_to_string() to format histogram data in string form.
  - Add public methods to libdm to access numerical histogram config and data.
  - Parse and store histogram data in dm_stats_list() and dm_stats_populate().
  - Add an argument to specify histogram bounds to dm_stats_create_region().
  - Add dm_histogram_bounds_from_{string,uint64_t}() to parse histogram bounds.
  - Add dm_histogram handle type to represent a latency histogram and its bounds.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-2
changelog:
  - Fix vgimportclone cache_dir path name (2.02.115).
  - Disallow usage of --stripe and --stripesize when creating cache pool.
  - Swapping of LV identifiers handles more complex LVs.
  - Fix VG metadata comparison failure while scanning the VG for lvmetad.
  - Ignore persistent cache if configuration changed. (2.02.127)
  - Do not check for full thin pool when activating without messages (1.02.107).


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-3
changelog:
  - Enforce writethrough mode for cleaner policy.
  - Check for enough space in thin-pool in command before creating new thin.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.161-3
changelog:
  - Improve lvmlockd message for lock-start.
  - Improve lvmlockd activation locking error message.
  - Improve lvmlockd error message about missing global lock.
  - Allow lvconvert with implied cache pool.
  - Fix vgsplit with external origin LV. (2.02.161)


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.162-1
changelog:
  - Extend vg_validate also to check raid configurations thoroughly.
  - Support lvconvert -Zn also when doing full cache pool conversion.
  - Suppress not zeroing warn when converting to thin LV for non-zeroing tpool.
  - Fix automatic updates of PV extension headers to newest version.
  - Improve lvconvert --trackchanges validation to require --splitmirrors 1.
  - Add note about lastlog built-in command to lvm man page.
  - Fix unrecognised segtype flag message.
  - lvconvert not clears cache pool metadata ONLY with -Zn. 
  - Add allocation/raid_stripe_all_devices to reinstate previous behaviour.
  - Create raid stripes across fixed small numbers of PVs instead of all PVs. 
  - Disallow lvconvert --replace with raid0* LVs. 
  - Fix some lvmetad changed VG metadata notifications that sent uncommitted data.
  - Fix json reporting to escape '"' character that may appear in reported string.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.163-1
changelog:
  - Add profile for lvmdbusd which uses lvm shell json report output.
  - Restrict in-command modification of some parms in lvm shell.
  - Apply LVM_COMMAND_PROFILE early for lvm shell.
  - Refactor reporting so lvm shell log report collects whole of cmd execution.
  - Support LVM_*_FD envvars to redirect output to file descriptors.
  - Limit use of --corelog and --mirrorlog to mirrors in lvconvert.
  - Reject --nosync option for RAID6 LVs in lvcreate.
  - Do not refresh whole cmd context if profile dropped after processing LVM cmd.
  - Support straightforward lvconvert between striped and raid4 LVs. 
  - Support straightforward lvconvert between raid1 and mirror LVs. 
  - Report supported conversions when asked for unsupported raid lvconvert.
  - Add "--rebuild PV" option to lvchange to allow for PV selective rebuilds.
  - Preserve existing mirror region size when using --repair.
  - Forbid stripe parameters with lvconvert --repair.
  - Unify stripe size validation into get_stripe_params to catch missing cases.
  - Further lvconvert validation logic refactoring.
  - Add "lvm fullreport" man page.
  - Add dm_report_destroy_rows/dm_report_group_output_and_pop_all for lvm shell.
  - Adjust group handling and json production for lvm shell.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.164-2
changelog:
  - Suppress some unnecessary --stripesize parameter warnings.
  - Fix selection of PVs when allocating raid0_meta.
  - Specify max stripes for raid LV types: raid0:64; 1:10; 4,5:63; 6:62; 10:32.
  - Avoid double suffix when naming _rmeta LV paired with _rimage LV.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.164-3
changelog:
  - Disallow segtype and mirror conversions of raid10 volumes.
  - Fix dmeventd unmonitoring when segment type (and dso) changes.
  - Don't allow lvconvert --repair on raid0 devices or attempt to monitor them.
  - No longer adjust incorrect number of raid stripes supplied to lvcreate.
  - Move lcm and gcd to lib/misc.
  - Suppress some unnecessary --stripesize parameter warnings.
  - Fix 'pvmove -n name ...' to prohibit collocation of RAID SubLVs


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.164-4
changelog:
  - Use lsblk -s and lsblk -O in lvmdump only if these options are supported.
  - Fix typo in report/columns_as_rows config option name recognition (2.02.99).
  - Do not monitor cache-pool metadata when LV is just being cleared.
  - Add allocation/cache_pool_max_chunks to prevent misuse of cache target.
  - Fix number of stripes shown in lvcreate raid10 message when too many.
  - Give error not segfault in lvconvert --splitmirrors when PV lies outside LV.
  - Avoid PV tags when checking allocation against parallel PVs.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.164-5
changelog:
  - Use udev db to check for mpath components before running pvscan for lvmetad.
  - Use devices/allow_changes_with_duplicate_pvs=1 by default.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.165-1
changelog:
  - Support raid scrubbing on cache origin LV.
  - Add lvmraid(7) man page.
  - Use udev db to check for mpath components before running pvscan for lvmetad.
  - Improve explanation of udev fallback in libdevmapper.h.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.165-2
changelog:
  - Fix possible NULL pointer dereference when checking for monitoring.
  - Add lvmreport(7) man page.
  - Report 0% as dirty (copy%) for cache without any used block.
  - Fix lvm2api reporting of cache data and metadata percent.
  - Restore reporting of metadata usage for cache volumes (2.02.155).


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.165-3
changelog:
  - Fix lvchange --discard|--zero for active thin-pool.
  - Fix lvconvert --repair regression for RAID LVs.
  - Always specify snapshot cow LV for monitoring not internal LV. (2.02.165)
  - Ensure memory allocated internally for --filemap histogram bounds are freed.
  - Fix missing display of last created dmstats file map.
  - Use --alloc normal for mirror logs even if the mimages were stricter.
  - Fix reported origin lv field for cache volumes. (2.02.133)
  - Fix lock-holder device for thin pool with inactive thin volumes.
  - Enforce 4MiB or 25% metadata free space for thin pool operations.
  - Fix lvmetad metadata validation when rescanning VG.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.166-1
changelog:
  - Disable lvconvert of thin pool to raid while active.
  - Use dm_config_parse_without_dup_node_check() to speedup metadata reading.
  - Fix lvm2-activation-generator to read all LVM2 config sources. (2.02.155)
  - Fix man entry for dmsetup status.
  - Introduce new dm_config_parse_without_dup_node_check().


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.166-1.el7_3.1
changelog:
  - Fix lvconvert to allow repair for cache raid LVs.
  - Fix time when dmeventd is reloaded on package upgrade to start using new code.
  - Fix libdm versioning for dm_tree_node_size_changed symbol.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.166-1.el7_3.2
changelog:
  - Prevent raid4 creation/conversion on non-supporting kernels
  - Add direct striped -> raid4 conversion
  - Fix raid4 parity image pair position on conversions from striped/raid0*


author: Bob Relyea <rrelyea@redhat.com> - 1.0.1-4
changelog:
  - make the coolkey token caches persist over application calls.
  - make a separate cache for each user.


author: Bob Relyea <rrelyea@redhat.com> - 1.0.1-11
changelog:
  - CAC cards sometimes need to reset before they can get their
  - initial transaction (problem is noticed on insertion an removal)


author: Bob Relyea <rrelyea@redhat.com> - 1.0.1-14
changelog:
  - Shared memory directory needs to be writeable by all so
  - coolkey can create caches for any user. (lack of caches
  - show up in screen savers reactly slowly).


author: Robert Relyea <rrelyea@redhat.com> - 1.1.0-12
changelog:
  - Fix threading issue. Coolkey will now work with non-threaded applications 
  - that don't link with libpthread.


author: Robert Relyea <rrelyea@redhat.com> - 1.1.0-34
changelog:
  - recognize up to 32 keys and certs in coolkeys. (can go up to 62 with just #define changes)
  - own our cache file.
  - verify we are using the correct mechanisms


author: John H Terpstra <jht@samba.anu.edu.au>
changelog:
  - Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
  - Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
  - Compounded make line
  - Updated smb.init restart mechanism
  - Use compound mkdir -p line instead of individual calls to mkdir
  - Fixed smb.conf file path for log files
  - Fixed smb.conf file path for incoming smb print spool directory
  - Added a number of options to smb.conf file
  - Added smbadduser command (missed from all previous RPMs) - Doooh!
  - Added smbuser file and smb.conf file updates for username map


author: Erik Troan <ewt@redhat.com>
changelog:
  - made the %postun script a tad less agressive; no reason to remove
    the logs or lock file (after all, if the lock file is still there,
    samba is still running)
  - the %postun and %preun should only exectute if this is the final
    removal
  - migrated %triggerpostun from Red Hat's samba package to work around
    packaging problems in some Red Hat samba releases


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add a mount.smb to make smb mounting a little easier.
  - smb filesystems apparently don't work on alpha. Oops.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.0.5
  - fix mount.smb - smbmount options changed again.........
  - fix postun. oops.
  - update some stuff from the samba team's spec file.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - use cp rather than mv to preserve /etc/services perms (#4938 et al).
  - use mktemp to generate /etc/tmp.XXXXXX file name.
  - add prereqs on sed/mktemp/killall (need to move killall to /bin).
  - fix trigger syntax (i.e. "samba < 1.9.18p7" not "samba < samba-1.9.18p7")


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix yp_get_default_domain in autoconf
  - only link against readline for smbclient
  - fix log rotation (#9909)


author: Than Ngo <than@redhat.de>
changelog:
  - add initdir macro to handle the initscript directory
  - add a new macro to handle /etc/pam.d/system-auth


author: Bill Nottingham <notting@redhat.com>
changelog:
  - move initscript back
  - remove 'Using Samba' book from %doc 
  - move stuff to /etc/samba (#13708)
  - default configuration tweaks (#13704)
  - some logrotate tweaks


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix swat only_from line (#18726, others)
  - fix attempt to write outside buildroot on install (#17943)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - set a default CA certificate path in smb.conf (#19010)
  - require openssl >= 0.9.5a-20 to make sure we have a ca-bundle.crt file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - i18n-ize initscript
  - add a sysconfig file for daemon options (#23550)
  - clarify smbpasswd man page (#23370)
  - build with LFS support (#22388)
  - avoid extraneous pam error messages (#10666)
  - add Urban Widmark's bug fixes for smbmount (#19623)
  - fix setgid directory modes (#11911)
  - split swat into subpackage (#19706)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - tweak the PAM code some more to try to do a setcred() after initgroups()
  - pull in all of the optflags on i386 and sparc
  - don't explicitly enable Kerberos support -- it's only used for password
    checking, and if PAM is enabled it's a no-op anyway


author: Helge Deller <hdeller@redhat.de>
changelog:
  - updated to samba 2.2.0
  - moved codepages to %{_datadir}/samba/codepages
  - use all available CPUs for building rpm packages
  - use %{_xxx} defines at most places in spec-file
  - "License:" replaces "Copyright:"
  - dropped excludearch sparc
  - de-activated japanese patches 100 and 200 for now 
    (they need to be fixed and tested wth 2.2.0)
  - separated swat.desktop file from spec-file and added
    german translations
  - moved /etc/sysconfig/samba to a separate source-file
  - use htmlview instead of direct call to netscape in 
    swat.desktop-file


author: Helge Deller <hdeller@redhat.de>
changelog:
  - build as 2.2.0-1 release
  - skip the documentation-directories docbook, manpages and yodldocs
  - don't include *.sgml documentation in package
  - moved codepage-directory to /usr/share/samba/codepages
  - make it compile with glibc-2.2.3-10 and kernel-headers-2.4.2-2


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - (these changes are from the non-head version)
  - Don't include /usr/sbin/samba, it's the same as the initscript
  - unset TMPDIR, as samba can't write into a TMPDIR owned
    by root (#41193)
  - Add pidfile: lines for smbd and nmbd and a config: line
    in the initscript  (#15343)
  - don't use make -j
  - explicitly include /usr/share/samba, not just the files in it


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Use /var/cache/samba instead of /var/lock/samba 
  - Remove "domain controller" keyword from smb.conf, it's 
    deprecated (from #13704)
  - Sync some examples with smb.conf.default
  - Fix password synchronization (#16987)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Don't include smbpasswd in samba, it's in samba-common (#51598)
  - Add a disabled "obey pam restrictions" statement - it's not
    active, as we use encrypted passwords, but if the admin turns
    encrypted passwords off the choice is available. (#31351)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-3
changelog:
  - Add "--with-utmp" to configure options (#55372)
  - Include winbind, pam_smbpass.so, rpcclient and smbcacls
  - start using /var/cache/samba, we need to keep state and there is
    more than just locks involved


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-5
changelog:
  - Teach smbadduser about "getent passwd" 
  - Fix more pid-file references
  - Add (conditional) winbindd startup to the initscript, configured in
    /etc/sysconfig/samba


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-6
changelog:
  - Move winbind files to samba-common. Add separate initscript for
    winbind 
  - Fixes for winbind - protect global variables with mutex, use
    more secure getenv


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.3a-3
changelog:
  - include interfaces.o in pam_smbpass.so, which needs symbols from interfaces.o
    (patch posted to samba-list by Ilia Chipitsine)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.5-7
changelog:
  - Enable VFS support and compile the "recycling" module (#69796)
  - more selective includes of the examples dir


author: Jay Fenlason <fenlason@redhat.com> 2.2.7a-3
changelog:
  - edited spec file to put .so files in the correct directories
    on 64-bit platforms that have 32-bit compatability issues
    (sparc64, x86_64, etc).  This fixes bugzilla #83782.
  - Added samba-2.2.7a-error.patch from twaugh.  This fixes
    bugzilla #82454.


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.7a-4
changelog:
  - relink libnss_wins.so with SHLD="%{__cc} -lnsl" to force libnss_wins.so to
    link with libnsl, avoiding unresolved symbol errors on functions in libnsl


author: Jay Fenlason <fenlason@redhat.com> 2.2.8-0
changelog:
  - Upgrade to 2.2.8
  - removed commented out patches.
  - removed old patches and .md5 files from the repository.
  - remove duplicate /sbin/chkconfig --del winbind which causes
    warnings when removing samba.
  - Fixed minor bug in smbprint that causes it to fail when called with
    more than 10 parameters: the accounting file (and spool directory
    derived from it) were being set wrong due to missing {}.  This closes
    bug #86473.
  - updated smb.conf patch, includes new defaults to close bug #84822.


author: Jay Fenlason <fenlason@redhat.com> 2.2.8a-1
changelog:
  - upgrade to 2.2.8a
  - remove old .md5 files
  - add "pid directory = /var/run" to the smb.conf file.  Fixes #88495
  - Patch from jra@dp.samba.org to fix a delete-on-close regression


author: Jay Fenlason <fenlason@redhat.com> 2.2.8a-2
changelog:
  - add libsmbclient.so for gnome-vfs-extras
  - Edit specfile to specify /var/run for pid files
  - Move /tmp/.winbindd/socket to /var/run/winbindd/socket


author: Jay Fenlason <fenlason@redhat.com> 3.0.0-3beta3
changelog:
  - Merge from 3.0.0-2beta3.3E
  - (Correct log file names (#100981).)
  - (Fix pidfile directory in samab.log)
  - (Remove obsolete samba-3.0.0beta2.tar.bz2.md5 file)
  - (Move libsmbclient to the -common package (#99449))


author: Jay Fenlason <fenlason@redhat.com> 3.0.0-15
changelog:
  - New 3.0.0 final release
  - merge nmbd-netbiosname and testparm patches from 3E branch
  - updated the -logfiles patch to work against 3.0.0
  - updated the pie patch
  - update the VERSION file during build
  - use make -j if avaliable
  - merge the winbindd_privileged change from 3E
  - merge the "rm /usr/lib" patch that allows Samba to build on 64-bit
    platforms despite the broken Makefile


author: Felipe Alfaro Solana <felipe_alfaro@linuxmail.org> 3.0.1-1
changelog:
  - Update to 3.0.1
  - Removed testparm patch as it's already merged
  - Removed Samba.7* man pages
  - Fixed .buildroot patch
  - Fixed .pie patch
  - Added new /usr/bin/tdbdump file


author: Jay Fenlason <fenlason@redhat.com> 3.0.2-3rc2
changelog:
  - add %dir entries for %{_libdir}/samba and %{_libdir}/samba/charset
  - Upgrade to new upstream version
  - build mount.cifs for the new cifs filesystem in the 2.6 kernel.


author: Jay Fenlason <fenlason@redhat.com> 3.0.2-5
changelog:
  - New upstream version: 3.0.2 final includes security fix for #114995
    (CAN-2004-0082)
  - Edit postun script for the -common package to restart winbind when
    appropriate.  Fixes bugzilla #114051.


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Change all requires lines to list an explicit epoch.  Closes #102715
  - Add an explicit Epoch so that %{epoch} is defined.


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-1.pre1
changelog:
  - New upstream version.
  - Updated -pie and -logfiles patches for 3.0.3pre1
  - add krb5-devel to buildrequires, fixes #116560
  - Add patch from Miloslav Trmac (mitr@volny.cz) to allow non-root to run
    "service smb status".  This fixes #116559


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-2.pre2
changelog:
  - New upstream version  
  - Updated configure line to remove --with-fhs and to explicitly set all
    the directories that --with-fhs was setting.  We were overriding most of
    them anyway.  This closes #118598


author: jay Fenlason <fenlason@redhat.com> 3.0.3-3.rc1
changelog:
  - New upstream version
  - updated spec file to make libsmbclient.so executable.  This closes
    bugzilla #121356


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-5
changelog:
  - Patch to allow password changes from machines patched with
    Microsoft hotfix MS04-011.
  - Include patches for https://bugzilla.samba.org/show_bug.cgi?id=1302
    and https://bugzilla.samba.org/show_bug.cgi?id=1309


author: Jay Fenlason <fenlason@redhat.com> 3.0.5.0pre1.0
changelog:
  - New upstream version
  - use % { SOURCE1 } instead of a hardcoded path
  - include -winbind patch from Gerald (Jerry) Carter (jerry@samba.org)
    https://bugzilla.samba.org/show_bug.cgi?id=1315
    to make winbindd work against Windows versions that do not have
    128 bit encryption enabled.
  - Moved %{_bindir}/net to the -common package, so that folks who just
    want to use winbind, etc don't have to install -client in order to
    "net join" their domain.
  - New upstream version obsoletes the patches added in 3.0.3-5
  - Remove smbgetrc.5 man page, since we don't ship smbget.


author: Jay Fenlason <fenlason@redhat.com> 3.0.5-0.pre1.1
changelog:
  - Backport base64_decode patche to close CAN-2004-0500
  - Backport hash patch to close CAN-2004-0686
  - use_authtok patch from Nalin Dahyabhai <nalin@redhat.com>
  - smbclient-kerberos patch from Alexander Larsson <alexl@redhat.com>
  - passwd patch uses "*" instead of "x" for "hashed" passwords for
    accounts created by winbind.  "x" means "password is in /etc/shadow" to
    brain-damaged pam_unix module.


author: Jay Fenlason <fenlason@redhat.com> 3.0.5-2
changelog:
  - Upgrade to 3.0.5, which is a regression from 3.0.5pre1 for a
    security fix.
  - Include the 3.0.4-backport patch from the 3E branch.  This restores
    some of the 3.0.5pre1 and 3.0.5rc1 functionality.


author: Jason Vas Dias <jvdias@redhat.com> 3.0.5-3
changelog:
  - Removed '-pie' patch - 3.0.5 uses -fPIC/-PIC, and the combination
  - resulted in executables getting corrupt stacks, causing smbmnt to
  - get a SIGBUS in the mount() call (bug 127420).


author: Jay Fenlason <fenlason@redhat.com> 3.0.6-3
changelog:
  - New upstream version.
  - Include post 3.0.6 patch from "Gerald (Jerry) Carter" <jerry@samba.org>
    to fix a duplicate in the LDAP schema.
  - Include 64-bit timestamp patch from Ravikumar (rkumar@hp.com)
    to allow correct timestamp handling on 64-bit platforms and fix #126109.
  - reenable the -pie patch.  Samba is too widely used, and too vulnerable
    to potential security holes to disable an important security feature
    like -pie.  The correct fix is to have the toolchain not create broken
    executables when programs compiled -pie are stripped.
  - Remove obsolete patches.
  - Modify this spec file to put libsmbclient.{a,so} in the right place on
    x86_64 machines.


author: Jay Fenlason <fenlason@redhat.com> 3.0.7-3
changelog:
  - Upgrade to 3.0.7, which fixes CAN-2004-0807 CAN-2004-0808
    This obsoletes the 3.0.6-schema patch.
  - Update BuildRequires line to include openldap-devel openssl-devel
    and cups-devel


author: Jay Fenlason <fenlason@redhat.com> 3.0.7-4
changelog:
  - Update docs section to not carryover the docs/manpages directory
    This moved many files from /usr/share/doc/samba-3.0.7/docs/* to
    /usr/share/doc/samba-3.0.7/*
  - Modify spec file as suggested by Rex Dieter (rdieter@math.unl.edu)
    to correctly create libsmbclient.so.0 and to use %_initrddir instead
    of rolling our own.  This closes #132642
  - Add patch to default "use sendfile" to no, since sendfile appears to
    be broken
  - Add patch from Volker Lendecke <vl@samba.org> to help make
    ldapsam_compat work again.
  - Add patch from "Vince Brimhall" <vbrimhall@novell.com> for ldapsam_compat
    These two patches close bugzilla #132169


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Include patch from Steven Lawrance (slawrance@yahoo.com) that modifies
    smbmnt to work with 32-bit uids.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-0.pre1.2
changelog:
  - Re-enable the x_fclose patch that was accidentally disabled
    in 3.0.8-0.pre1.1.  This closes #135832
  - include Nalin's -fqdn and -salt patches.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-0.pre1.3
changelog:
  - disable the -salt patch, because it causes undefined references in
    libsmbclient that prevent gnome-vfs from building.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-2
changelog:
  - New upstream version fixes CAN-2004-0930.  This obsoletes the
    disable-sendfile, salt, signing-shortkey and fqdn patches.
  - Add my <fenlason@redhat.com> ugly non-ascii-domain patch.
  - Updated the pie patch for 3.0.8.
  - Updated the logfiles patch for 3.0.8.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-3
changelog:
  - Include the corrected docs tarball, and use it instead of the
    obsolete docs from the upstream 3.0.8 tarball.
  - Update the logfiles patch to work with the updated docs.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-3.1
changelog:
  - Rescue the install.mount.smbfs patch from Juanjo Villaplana
    (villapla@si.uji.es) to prevent building the srpm from trashing your
    installed /usr/bin/smbmount


author: Than Ngo <than@redhat.com> 3.0.8-4
changelog:
  - fix unresolved symbols in libsmbclient which caused applications
    such as KDE's konqueror to fail when accessing smb:// URLs. #139894


author: Jay Fenlason <fenlason@redhat.com> 3.0.9-2
changelog:
  - New upstream release.  This obsoletes the -secret patch.
    Include my changetrustpw patch to make "net ads changetrustpw" stop
    aborting.  This closes #134694
  - Remove obsolete triggers for ancient samba versions.
  - Move /var/log/samba to the -common rpm.  This closes #76628
  - Remove the hack needed to get around the bad docs files in the
    3.0.8 tarball.
  - Change the comment in winbind.init to point at the correct pidfile.
    This closes #76641


author: Jay Fenlason <fenlason@redhat.com> 3.0.10-2
changelog:
  - New upstream release that closes CAN-2004-1154  bz#142544
  - Include the -64bit patch from Nalin.  This closes bz#142873
  - Update the -logfiles patch to work with 3.0.10
  - Create /var/run/winbindd and make it part of the -common rpm to close
    bz#142242


author: Jay Fenlason <fenlason@redhat.com> 3.0.10-4
changelog:
  - Update the -man patch to fix ntlm_auth.1 too.
  - Move pam_smbpass.so to the -common package, so both the 32
    and 64-bit versions will be installed on multiarch platforms.
    This closes bz#143617
  - Added new -delim patch to fix mount.cifs so it can accept
    passwords with commas in them (via environment or credentials
    file) to close bz#144198


author: Jay Fenlason <fenlason@redhat.com> 3.0.11-3
changelog:
  - add -gcc4 patch to compile with gcc 4.
  - remove the now obsolete -smbclient-kerberos.patch
  - Include four upstream patches from
    http://samba.org/~jerry/patches/post-3.0.11/
    (Slightly modified the winbind_find_dc_v2 patch to apply easily with
    rpmbuild).


author: Jay Fenlason <fenlason@redhat.com> 3.0.11-4
changelog:
  - Use the updated filter-requires-samba.sh file, so we don't accidentally
    pick up a dependency on perl(Crypt::SmbHash)


author: Jay Fenlason <fenlason@redhat.com> 3.0.13-2
changelog:
  - New upstream release
  - add my -quoting patch, to fix swat with strings that contain
    html meta-characters, and to use correct quote characters in
    lists, closing bz#134310
  - include the upstream winbindd_2k3sp1 patch
  - include the -smbclient patch.
  - include the -hang patch from upstream.


author: Jay Fenlason <fenlason@redhat.com> 3.0.14a-2
changelog:
  - New upstream release.
  - the -64bit-timestamps, -clitar, -establish_trust, user_rights_v1,
    winbind_find_dc_v2 patches are now obsolete.


author: Jay Fenlason <fenlason@redhat.com> 3.0.20-2
changelog:
  - New upstream release
    Includes five upstream patches -bug3010_v1, -groupname_enumeration_v3,
      -regcreatekey_winxp_v1, -usrmgr_groups_v1, and -winbindd_v1
    This obsoletes the -pie and -delim patches
    the -warning and -gcc4 patches are obsolete too
    The -man, -passwd, and -smbspool patches were updated to match 3.0.20pre1
    Also, the -quoting patch was implemented differently upstream
    There is now a umount.cifs executable and manpage
    We run autogen.sh as part of the build phase
    The testprns command is now gone
    libsmbclient now has a man page
  - Include -bug106483 patch to close
    bz#106483 smbclient: -N negates the provided password, despite documentation
  - Added the -warnings patch to quiet some compiler warnings.
  - Removed many obsolete patches from CVS.


author: Jay Fenlason <fenlason@redhat.com> 3.0.20b-2
changelog:
  - turn on -DLDAP_DEPRECATED to allow access to ldap functions that have
    been depricated in 2.3.11, but which don't have well-documented
    replacements (ldap_simple_bind_s(), for example).
  - Upgrade to 3.0.20b, which includes all the previous upstream patches.
  - Updated the -warnings patch for 3.0.20a.
  - Include  --with-shared-modules=idmap_ad,idmap_rid to close
    bz#156810 --with-shared-modules=idmap_ad,idmap_rid
  - Include the new samba.pamd from Tomas Mraz (tmraz@redhat.com) to close
    bz#170259 pam_stack is deprecated


author: Jay Fenlason <fenlason@redhat.com> 3.0.21b-2
changelog:
  - New upstream version.
  - Since the rawhide kernel has dropped support for smbfs, remove smbmount
    and smbumount.  Users should use mount.cifs instead.
  - Upgrade to 3.0.21b


author: Jay Fenlason <fenlason@redhat.com> 3.0.23-0.RC3
changelog:
  - New upstream RC release.
  - Update the -logfiles, and -passwd patches for
    3.0.23rc3
  - Include the change to smb.init from Bastien Nocera <bnocera@redhat.com>)
    to close
    bz#182560 Wrong retval for initscript when smbd is dead
  - Update this spec file to build with 3.0.23rc3
  - Remove the -install.mount.smbfs patch, since we don't install
    mount.smbfs any more.


author: Jay Fenlason <fenlason@redhat.com> 3.0.23-2
changelog:
  - New upstream release.
  - Use modified filter-requires-samba.sh from packaging/RHEL/setup/
    to get rid of bogus dependency on perl(Unicode::MapUTF8)
  - Update the -logfiles and -smb.conf patches to work with 3.0.23


author: Jay Fenlason <fenlason@redhat.com> 3.0.23a-3
changelog:
  - Fix the -logfiles patch to close
    bz#199607 Samba compiled with wrong log path.
    bz#199206 smb.conf has incorrect log file path


author: Simo Sorce <ssorce@redhat.com> 3.0.24-2.fc7
changelog:
  - New upstream release
  - Fix packaging issue wrt idmap modules used only by smbd
  - Addedd Vista Patchset for compatibility with Windows Vista
  - Change default of "msdfs root", it seem to cause problems with
    some applications and it has been proposed to change it for
    3.0.25 upstream


author: Simo Sorce <ssorce@redhat.com> 3.0.24-3.fc7
changelog:
  - Directories reorg, tdb files must go to /var/lib, not
    to /var/cache, add migration script in %post common
  - Split out libsmbclient, devel and doc packages
  - Remove libmsrpc.[h|so] for now as they are not really usable
  - Remove kill -HUP from rotate, samba use -HUP for other things
    noit to reopen logs


author: Simo Sorce <ssorce@redhat.com> 3.0.24-5.fc7
changelog:
  - actually use the correct samba.pamd file not the old samba.pamd.stack file
  - fix logifles and use upstream convention of log.* instead of our old *.log
    Winbindd creates its own log.* files anyway so we will be more consistent
  - install our own (enhanced) default smb.conf file
  - Fix pam_winbind acct_mgmt PAM result code (prevented local users from
    logging in). Fixed by Guenther.
  - move some files from samba to samba-common as they are used with winbindd
    as well


author: Simo Sorce <ssorce@redhat.com> 3.0.24-6.fc7
changelog:
  - do not put comments inline on smb.conf options, they may be read
    as part of the value (for example log files names)


author: Simo Sorce <ssorce@redhat.com> 3.0.24-7.fc7
changelog:
  - make winbindd start earlier in the init process, at the same time
    ypbind is usually started as well
  - add a sepoarate init script for nmbd called nmb, we need to be able
    to restart nmbd without dropping al smbd connections unnecessarily


author: Simo Sorce <ssorce@redhat.com>
changelog:
  - remove patch for bug 106483 as it introduces a new bug that prevents
    the use of a credentials file with the smbclient tar command
  - move the samba private dir from being the same as the config dir
    (/etc/samba) to /var/lib/samba/private


author: Simo Sorce <ssorce@redhat.com> 3.0.24-9.fc7
changelog:
  - integrate most of merge review proposed changes (bug #226387)
  - remove libsmbclient-devel-static and simply stop shipping the
    static version of smbclient as it seem this is deprecated and
    actively discouraged


author: Simo Sorce <ssorce@redhat.com> 3.0.24-10.fc7
changelog:
  - set passdb backend = tdbsam as default in smb.conf
  - remove samba-docs dependency from swat, that was a mistake
  - put back COPYING and other files in samba-common
  - put examples in samba not in samba-docs
  - leave only stuff under docs/ in samba-doc


author: Guenther Deschner <gdeschner@redhat.com> 3.0.24-11.fc7
changelog:
  - enable PAM and NSS dlopen checks during build
  - fix unresolved symbols in libnss_wins.so (bug #198230)


author: Simo Sorce <ssorce@redhat.com> 3.0.24-12.fc7
changelog:
  - fixes in smb.conf
  - advice in smb.conf to put scripts in /var/lib/samba/scripts
  - create /var/lib/samba/scripts so that selinux can be happy
  - fix Vista problems with msdfs errors


author: Simo Sorce <ssorce@redhat.com>
changelog:
  - fixes in the spec file
  - moved to 3.0.25rc1
  - addedd patches (merged upstream so they will be removed in 3.0.25rc2)


author: Simo Sorce <ssorce@redhat.com>
changelog:
  - update to 3.0.25a as it contains many fixes
  - add a fix for pam_smbpass made by Günther but committed upstream after 3.0.25a was cut.


author: Simo Sorce <ssorce@redhat.com> 3.2.0-0.pre1.fc9
changelog:
  - New major relase, minor switched from 0 to 2
  - License change, the code is now GPLv3+
  - Numerous improvements and bugfixes included
  - package libsmbsharemodes too
  - remove smbldap-tools as they are already packaged separately in Fedora
  - Fix bug 245506


author: Simo Sorce <ssorce@redhat.com> - 3.2.0-0.pre1.3
changelog:
  - Try to fix GCC 4.3 build
  - Add --with-dnsupdate flag and also make sure other flags are required just to
    be sure the features are included without relying on autodetection to be
    successful


author: Guenther Deschner <gdeschner@redhat.com> - 3.3.0-0.25
changelog:
  - Update to 3.3.0 final
  - Add upstream fix for ldap connections to AD (Bug #6073)
  - Remove bogus perl dependencies (resolves: #473051)


author: Simo Sorce <ssorce@redhat.com> - 3.3.1-0.29
changelog:
  - Make the talloc and ldb packages optionsl and disable their build within
    the samba3 package, they are now built as part of the samba4 package
    until they will both be released as independent packages.


author: Simo Sorce <ssorce@redhat.com> - 3.3.2-0.33
changelog:
  - Fix nmbd init script nmbd reload was causing smbd not nmbd to reload the
    configuration
  - Fix upstream bug 6224, nmbd was waiting 5+ minutes before running elections on
    startup, causing your own machine not to show up in the network for 5 minutes
    if it was the only client in that workgroup (fix committed upstream)


author: Guenther Deschner <gdeschner@redhat.com> - 3.4.0-0.41
changelog:
  - Fix Bug #6551 (vuid and tid not set in sessionsetupX and tconX)
  - Specify required talloc and tdb version for BuildRequires


author: Simo Sorce <ssorce@redhat.com> - 3.4.2-47
changelog:
  - Spec file cleanup
  - Fix sources upstream location
  - Remove conditionals to build talloc and tdb, now they are completely indepent
    packages in Fedora
  - Add defattr() where missing
  - Turn all tabs into 4 spaces
  - Remove unused migration script
  - Split winbind-clients out of main winbind package to avoid multilib to include
    huge packages for no good reason


author: Guenther Deschner <gdeschner@redhat.com> - 3.5.3-60
changelog:
  - Update to 3.5.3
  - Make sure nmb and smb initscripts return LSB compliant return codes
  - Fix winbind over ipv6


author: Andreas Schneider <asn@redhat.com> - 2:3.6.5-88
changelog:
  - Move tmpfiles.d config to common package as it is needed for smbd and
    winbind.
  - Make sure tmpfiles get created after installation.


author: Ville Skyttä <ville.skytta@iki.fi> - 2:3.6.6-92
changelog:
  - Call ldconfig at libwbclient and -winbind-clients post(un)install time.
  - Fix empty localization files, use %find_lang to find and %lang-mark them.
  - Escape macros in %changelog.
  - Fix source tarball URL.


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.0-154.rc3
changelog:
  - Update to 4.0.0rc3.
  - resolves: #805562 - Unable to share print queues.
  - resolves: #863388 - Unable to reload smbd configuration with systemctl.


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.0-160.rc3
changelog:
  - resolves: #867893 - Move /var/log/samba to samba-common package for
                        winbind which requires it.


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.2-1
changelog:
  - Update to Samba 4.0.2.
  - Fixes CVE-2013-0213.
  - Fixes CVE-2013-0214.
  - resolves: #906002
  - resolves: #905700
  - resolves: #905704
  - Fix conn->share_access which is reset between user switches.
  - resolves: #903806
  - Add missing example and make sure we don't introduce perl dependencies.
  - resolves: #639470


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.3-1
changelog:
  - Update to Samba 4.0.3.
  - resolves: #907544 - Add unowned directory /usr/lib64/samba.
  - resolves: #906517 - Fix pidl code generation with gcc 4.8.
  - resolves: #908353 - Fix passdb backend ldapsam as module.


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.4-3
changelog:
  - resolves: #919405 - Fix and improve large_readx handling for broken clients.
  - resolves: #924525 - Don't use waf caching.


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.5-1
changelog:
  - Update to Samba 4.0.5.
  - Add UPN enumeration to passdb internal API (bso #9779).
  - resolves: #928947 - samba-doc is obsolete now.
  - resolves: #948606 - LogRotate should be optional, and not a hard "Requires".


author: - Andreas Schneider <asn@redhat.com> - 2:4.0.7-2
changelog:
  - resolves: #972692 - Build with PIE and full RELRO.
  - resolves: #884169 - Add explicit dependencies suggested by rpmdiff.
  - resolves: #981033 - Local user's krb5cc deleted by winbind.
  - resolves: #984331 - Fix samba-common tmpfiles configuration file in wrong
                        directory.


author: - Andreas Schneider <asn@redhat.com> - 2:4.1.0-0.2
changelog:
  - resolves: #985985 - Fix file conflict between samba and wine.
  - resolves: #985107 - Add support for new default location for Kerberos
                        credential caches.


author: - Andreas Schneider <asn@redhat.com> - 2:4.1.0-0.7
changelog:
  - related: #985609 - Update to Samba 4.1.0rc3.
  - resolves: #1005422 - Add support for KEYRING ccache type in pam_winbindd.


author: - Andreas Schneider <asn@redhat.com> - 2:4.1.0-0.8
changelog:
  - related: #985609 - Update to Samba 4.1.0rc4.
  - resolves: #1014656 - Split out a samba-winbind-modules package.


author: - Andreas Schneider <asn@redhat.com> - 4.1.0-4
changelog:
  - related: #884169 - Add direct dependency to samba-libs in the
                       glusterfs package.
  - resolves: #996567 - Fix userPrincipalName composition.
  - related: #884169 - Fix memset call with zero length in in ntdb.


author: - Andreas Schneider <asn@redhat.com> - 4.1.1-4
changelog:
  - resolves: #1034048 - Fix group name substitution in template homedir.
  - resolves: #1018041 - Fix CVE-2013-4408.
  - related: #884169 - Fix several covscan warnings.


author: - Andreas Schneider <asn@redhat.com> - 4.1.1-9
changelog:
  - resolves: #1033122 - Fix dropbox regression.
  - resolves: #1040464 - Fix %G substituion for config parameters.


author: - Andreas Schneider <asn@redhat.com> - 4.1.1-12
changelog:
  - resolves: #1050886 - Fix full CPU utilization in winbindd.
  - resolves: #1051400 - Fix segfault in smbd.
  - resolves: #1051402 - Fix SMB2 server panic when a smb2 brlock times out.


author: - Andreas Schneider <asn@redhat.com> - 4.1.1-17
changelog:
  - resolves: #1067606 - Fix wbinfo with one-way trust.
  - resolves: #1069569 - Fix memory leak reading the printer list.


author: - Alexander Bokovoy <abokovoy@redhat.com> - 4.1.1-30
changelog:
  - resolves: #1083859  - Force KRB5CCNAME in Samba systemd units.
  - related: #1082598 - Fully enables systemd integration.


author: - Guenther Deschner <gdeschner@redhat.com> - 4.1.1-34
changelog:
  - resolves: #1105505 - CVE-2014-0244: DoS in nmbd.
  - resolves: #1108845 - CVE-2014-3493: DoS in smbd with unicode path names.
  - resolves: #1105574 - CVE-2014-0178: Uninitialized memory exposure.


author: - Andreas Schneider <asn@redhat.com> - 4.1.1-37
changelog:
  - resolves: #1072352 - Make pidl a noarch subpackage.
  - resolves: #1133516 - Create a samba-test-libs package.
  - resolves: #1132873 - Add support to rebuild without clustering.


author: - Andreas Schneider <asn@redhat.com> - 4.1.12-2
changelog:
  - resolves: #1138554 - Fix consuming a lot of CPU when re-reading printcap info.
  - resolves: #1134323 - Fix running Samba on little endian Power8 (ppc64le).
  - resolves: #1113064 - Fix case sensitivity options with SMB2 protocols.
  - resolves: #1088924 - Fix applying ACL masks when setting ACLs.
  - resolves: #1135723 - Fix 'force user' regression.
  - resolves: #1117770 - Fix empty full_name field with samlogon.
  - resolves: #1101210 - Fix telling systemd that nmbd is waiting for interfaces.
  - resolves: #1127931 - Fix getgroups() with idmap_ad returning non-mapped groups.
  - resolves: #1144963 - Fix idmap_ad with SFU against trusted domains.
  - resolves: #1140568 - Fix a segfault in the smbclient echo command.
  - resolves: #1089940 - Improve service principal guessing in 'net ads'.
  - resolves: #955561 - Fix overwriting of SPNs in AD during 'net ads join'.
  - resolves: #955562 - Add precreated SPNS from AD during keytab initialization.


author: - Guenther Deschner <gdeschner@redhat.com> - 4.1.12-3
changelog:
  - resolves: #878351 - Fix usage of AES keys by default.
  - resolves: #861366 - Fix KRB5 locator to use same KDC for joining and DNS update.


author: - Andreas Schneider <asn@redhat.com> - 4.1.12-9
changelog:
  - resolves: #1162552 - Fix net ads join segfault on big endian systems.
  - resolves: #1164203 - Fix net ads join segfault with existing keytab.


author: - Andreas Schneider <asn@redhat.com> - 4.1.12-11
changelog:
  - resolves: #1163748 - Fix smbclient -L fails against new Windows versions
                         over TCP.
  - resolves: #1167849 - Fix smbstatus --profile always returning EXIT_FAILURE.


author: - Andreas Schneider <asn@redhat.com> - 4.1.12-13
changelog:
  - resolves: #1172089 - Fix 'net rpc join' with schannel changes.
  - resolves: #1170883 - Fix 'net time system' segfault.


author: Andreas Schneider <asn@redhat.com> - 4.2.2-1
changelog:
  - resolves: #1196140 - Rebase Samba to version 4.2.2
  - resolves: #1186403 - Split patches to fix multiarch conflicts
  - resolves: #1167325 - Retrieve printer GUID from AD if it is not in the
                         registry
  - resolves: #1220174 - Fix issues with winbind library dependencies
  - resolves: #1211658 - Fix stale cache entries on printer rename
  - resolves: #1228809 - Fix reconnect on session exparation


author: Andreas Schneider <asn@redhat.com> - 4.2.2-2
changelog:
  - related: #1196140 - Add missing build dependency for libarchive
  - related: #1196140 - Make sure we do a hardened build


author: Andreas Schneider <asn@redhat.com> - 4.2.3-1
changelog:
  - related: #1196140 - Rebase to version 4.2.3
  - resolves: #1237036 - Fix DCERPC PDU calculation
  - resolves: #1237039 - Fix winbind request cancellation
  - resolves: #1223981 - Fix possible segfault with smbX protocol setting


author: Andreas Schneider <asn@redhat.com> - 4.2.3-2
changelog:
  - resolves: #1238194 - Fix the 'dfree command'
  - resolves: #1216062 - Document netbios name length limitation


author: Andreas Schneider <asn@redhat.com> - 4.2.3-6
changelog:
  - resolves: #1255322 - Fix 'map to guest = Bad uid' option
  - resolves: #1255326 - Fix segfault with 'mangling method = hash'


author: Andreas Schneider <asn@redhat.com> - 4.2.3-9
changelog:
  - resolves: #1273912 - Fix dependencies to samba-common
  - resolves: #1273393 - Fix user after free in smb name resolution


author: Guenther Deschner <gdeschner@redhat.com> - 4.2.3-11
changelog:
  - resolves: #1290711
  - CVE-2015-3223 Remote DoS in Samba (AD) LDAP server
  - CVE-2015-5299 Missing access control check in shadow copy code
  - CVE-2015-5252 Insufficient symlink verification in smbd
  - CVE-2015-5296 Samba client requesting encryption vulnerable to
                  downgrade attack


author: Alexander Bokovoy <abokovoy@redhat.com> - 4.2.10-7
changelog:
  - Fix regressions introduced with security tightening as part of Badlock release
  - resolves: #1330199


author: Andreas Schneider <asn@redhat.com> - 4.4.4-1
changelog:
  - resolves: #1303076 - Rebase Samba to version 4.4.4
  - resolves: #1314673 - Fix CVE-2015-7560
  - resolves: #1263322 - Add '--no-dns-updates' option to 'net ads join'
  - resolves: #1264433 - Fix segfault in pam_winbind.so with invalid config
                         options
  - resolves: #1193504 - Fix smbget to retrieve files recursively
  - resolves: #1193502 - Fix smbget to use command line credentials
  - resolves: #1193493 - Fix smbget url credentials parsing
  - resolves: #1273999 - Support printing with Kerberos credentials on newer
                         CUPS versions
  - resolves: #1296821 - Define /etc/pam.d/samba as a non replaceable config
  - resolves: #1261107 - Fix memory leak because of missing talloc stackframe
  - resolves: #1333562 - Fix memory leak after smbc_free_context()
  - resolves: #1315422 - Fix regression from CVE-2015-5252
  - resolves: #1316899 - Fixed idmap_hash module issues when used with others
  - resolves: #1322691 - Fix badlock related bugs
  - Fix CVE-2015-5370
  - Fix CVE-2016-2110
  - Fix CVE-2016-2111
  - Fix CVE-2016-2112
  - Fix CVE-2016-2113
  - Fix CVE-2016-2114
  - Fix CVE-2016-2115
  - Fix CVE-2016-2118
  - resolves: #1327951 - Fix regression with anonymous connections from OS X
  - resolves: #1327845 - Fix pcap_cache_reload() with spoolssd
  - resolves: #1289640 - Fix ctdb selinux issue with read only tracking dbs
  - resolves: #1341208 - Fix enumerating groups over NSS with idmap_ad
  - resolves: #1345827 - Fix resolving trusted domain users on domain member
  - resolves: #1346334 - Fix typo in smb.conf.example
  - resolves: #1335292 - Fix site-aware 'net ads join -k'
  - resolves: #1260214 - Accept empty realm for ad domains with 'security=domain'


author: Andreas Schneider <asn@redhat.com> - 4.4.4-3
changelog:
  - related: #1260214 - Correctly warn about missing realm for ad domains
                        with 'security=domain'


author: Andreas Schneider <asn@redhat.com> - 4.4.4-4
changelog:
  - resolves: #1351655 - Fix winbind meomory leak with each cached credentials
                         login
  - resolves: #1351961 - Fix CVE-2016-2119


author: Andreas Schneider <asn@redhat.com> - 4.4.4-5
changelog:
  - resolves: #1359091 - Package /usr/lib/samba/ldb in the common-libs package
  - resolves: #1360788 - Fix multilib issue with ctdb-tests package
  - resolves: #1362385 - Fix Samba ignoring supplementary groups
  - resolves: #1364051 - Fix smbd panic with stale ctdb entries


author: Andreas Schneider <asn@redhat.com> - 4.4.4-6
changelog:
  - resolves: #1367316 - Increase required Kerbersion version number
  - resolves: #1366477 - Fix using the right krb5 ccache in libads
  - resolves: #1356501 - Fix high CPU usage with smbclient connection to
                         non-reachable IP


author: Andreas Schneider <asn@redhat.com> - 4.4.4-10
changelog:
  - resolves: #1393050 - Fix linking nss_wins with libreplace
  - resolves: #1393051 - Fix nss_wins function definitions for gethostbyname*
  - resolves: #1393048 - Fix %G substitution in AD case
  - resolves: #1393052 - Fix regression of smbclient unable to connect to
                         Apple and Azure


author: Erik Troan <ewt@redhat.com>
changelog:
  - Added usernetctl wrapper for user mode ifup and ifdown's and man page
  - Rewrote ppp and slip kill and retry code
  - Added doexec and man page


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Changed ifup-ppp and ifdown-ppp not to use doexec, because the argv[0]
    provided by doexec goes away when pppd gets swapped out.
  - ifup-ppp now sets remotename to the logical name of the device.
    This will BREAK current PAP setups on netcfg-managed interfaces,
    but we needed to do this to add a reasonable interface-specific
    PAP editor to netcfg.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added MTU for PPP.
  - Put PPPOPTIONS at the end of the options string instead of at the
    beginning so that they override other options.  Gives users more rope...
  - Don't do module-based stuff on non-module systems.  Ignore errors if
    st module isn't there and we try to load it.


author: Erik Troan <ewt@redhat.com>
changelog:
  - Got rid of xargs dependency in halt script
  - Don't mount /proc twice (unmount it in between)
  - sulogin and filesystem unmounting only happened for a corrupt root
    filesystem -- it now happens when other filesystems are corrupt as well


author: Erik Troan <ewt@redhat.com>
changelog:
  - Added DHCP support
  - Set hostname via reverse name lookup after configuring a networking
    device if the current hostname is (none) or localhost


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Support for net event notification:
    Call /sbin/netreport to request that SIGIO be sent to you whenever
    a network interface changes status (won't work for brining up SLIP
    devices).
    Call /sbin/netreport -r to remove the notification request.
  - Added ifdown-post, and made all the ifdown scrips call it, and
    added /etc/ppp/ip-down script that calls /etc/ppp/ip-down.local
    if it exists, then calls ifdown-post.
  - Moved ifup and ifdown to /sbin


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - /sbin/netreport sgid rather than suid.
  - /var/run/netreport writable by group root.

  - /etc/ppp/ip-{up|down} no longer exec their local versions, so
    now ifup-post and ifdown-post will be called even if ip-up.local
    and ip-down.local exist.


author: Donald Barnes <djb@redhat.com>
changelog:
  - added status function to functions along with better killproc
    handling.
  - added /sbin/usleep binary (written by me) and man page
  - changed BuildRoot to /var/tmp instead of /tmp


author: Donnie Barnes <djb@redhat.com>
changelog:
  - reworked status() to adjust for processes that change their argv[0] in
    the process table.  The process must still have it's "name" in the argv[0]
    string (ala sendmail: blah blah).


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Clone device support in network scripts, rc scripts, and usernetctl.
  - Disassociate from controlling tty in PPP and SLIP startup scripts,
    since they act as daemons.
  - Spec file now provides start/stop symlinks, since they don't fit in
    the CVS archive.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added network-functions to spec file.
  - Added report functionality to usernetctl.
  - Fixed bugs I introduced into usernetctl while adding clone device support.
  - Clean up entire RPM_BUILD_ROOT directory in %clean.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - /var/run/netreport needs to be group-writable now that /sbin/netreport
    is setguid instead of setuid.


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed network-scripts to allow full pathnames as config files
  - removed some old 3.0.3 pcmcia device handling


author: Erik Troan <ewt@redhat.com>
changelog:
  - set domainname to "" if none is specified in /etc/sysconfig/network
  - fix /proc mounting to get it in /etc/mtab


author: Erik Troan <ewt@redhat.com>
changelog:
  - tried to get /proc stuff right one more time (uses -t nonfs,proc now)
  - added support for /fsckoptions
  - changed 'yse' to 'yes' in KERNELD= line


author: Erik Troan <ewt@redhat.com>
changelog:
  - touch /var/lock/subsys/kerneld after cleaning out /var/lock/subsys
  - the logic for when  /var/lock/subsys/kerneld is touched was backwards


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Added lots of linuxconf support.  Should still work on systems that
    do not have linuxconf installed, but linuxconf gives enhanced support.
  - In concert with linuxconf, added IPX support.  Updated docs to reflect it.


author: Erik Troan <ewt@redhat.com>
changelog:
  - ipcalc should *never* have been setgid anything
  - depmod isn't run properly for non-serial numbered kernels


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - /etc/rc.d/rc: don't run /etc/rc.d/rcN.d/[KS]??foo.{rpmsave,rpmorig} scripts.
  - /etc/rc.d/rc.sysinit: raid startup (Nigel.Metheringham@theplanet.net).
  - /sbin/setsysfont: permit unicode fonts.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - rc.sysvinit should be working with all kernel versions now
  - requires e2fsprogs (for fsck)
  - set INPUTRC and LESSCHARSET on linux-lat


author: Bill Nottingham <notting@redhat.com>
changelog:
  - bugfixes (ifup-ppp, kill -TERM, force fsck, hwclock --adjust, setsysfont)
  - add initlog support. Now everything is logged (and bootup looks different)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - Mmm. Must always remove debugging code. before release. *thwap*
  - pump support
  - mount -a after mount -a -t nfs


author: Bill Nottingham <notting@redhat.com>
changelog:
  - doc updates
  - support for SYSFONTACM, other console-tools stuff
  - add net route for interface if it isn't there.
  - fix for a bash/bash2 issue


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run linuxconf if /usr isn't mounted
  - set macaddr before bootp
  - zero in the /var/run/utmpx file (gafton)
  - don't set hostname on ppp/slip (kills X)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - load keymaps & console font early
  - fixes for channel bonding, strange messages with non-boot network interfaces


author: Bill Nottingham <notting@redhat.com>
changelog:
  - clean out /var better
  - let everyone read /var/run/ppp*.dev
  - fix network startup so it doesn't depend on /usr


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't make module-info, System.map links
  - handle utmpx/wtmpx
  - fix lots of bugs in 4.21 release :)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - stability fixes for initlog
  - initlog now has a config file
  - add alias speedup from dharris@drh.net
  - move netfs links
  - usleep updates


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - use new linkname argument to pppd to make if{up,down}-ppp
    reliable -- requires ppp-2.3.9 or higher


author: Bill Nottingham <notting@redhat.com>
changelog:
  - new NFS unmounting from Bill Rugolsky <rugolsky@ead.dsa.com>
  - fix ifup-sl/dip confusion
  - more raid startup cleanup
  - make utmp group 22


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - add --remotename option to wvdial code
  - make sure we do not have an earlier version of wvdial that doesn't
    know how handle --remotename
  - make ppp-watch background itself after 30 seconds even if
    connection does not come up, at boot time only, so that a
    non-functional PPP connection cannot hang boot.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - ppp-watch now always kills pppd pgrp to make sure dialers are dead,
    and tries to hang up the modem


author: Bill Nottingham <notting@redhat.com>
changelog:
  - assorted brown paper bag fixes
  - check for programs/files before executing/sourcing them
  - control stop-a like magic sysrq


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fix some failed CHAP authentication
  - fix extremely unlikely, but slightly possible kill-random-process
    bug in ppp-watch
  - allow DNS{1,2} in any ifcfg-* file, not just PPP, and
    add nameserver entries, don't just replace them
  - don't use /tmp/confirm, use /var/run/confirm instead


author: Bill Nottingham <notting@redhat.com>
changelog:
  - load mixer settings for monolithic sound
  - man page for ppp-watch
  - add ARP variable for ifup
  - some i18n fixes


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fix more possible failed CHAP authentication (with chat scripts)
  - fix ppp default route problem
  - added ppp-watch man page, fixed usernetctl man page
  - make ifup-ppp work again when called from netcfg and linuxconf
  - try to keep ppp-watch from filling up logs by respawning pppd too fast
  - handle all linuxconf-style alias files with linuxconf


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - improvements in clone device handling
  - better signal handling in ppp-watch
  - yet another attempt to fix those rare PAP/CHAP problems


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - attempt to restore default route if PPP takes it over
  - man page fix for ipcalc
  - shvar cleaning
  - automate maintaining /boot/System.map symlinks


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - check that LC_ALL/LINGUAS and LANG are set before referencing them in lang.csh
  - fix check for /var/*/news, work around for bug #9140


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't create resolv.conf 0600
  - don't run ps as much (speed issues)
  - allow setting of MTU
  - other minor fixes


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - ifup-ppp: add hooks for demand-dialing PPP
  - functions: use basename of process when looking for its PID file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - tweak %pre back to a mv (rpm is fun!)
  - do USB initialization before fsck, so keyboard works if it fails


author: Matt Wilson <msw@redhat.com>
changelog:
  - kill all the PreTransaction stuff
  - directory ownership cleanups, add more LSB symlinks
  - move all the stuff back in to /etc/rc.d/


author: Bill Nottingham <notting@redhat.com>
changelog:
  - remove console-tools requirement
  - in netfs, start portmap if needed
  - cosmetic cleanups, minor tweaks
  - don't probe USB controllers


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't load usb drivers if they're compiled statically
  - don't call ifdown-post twice for ppp (#15285)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add usleep after kill -KILL in pidofproc, works around lockd issues (#14847)
  - add some fallback logic to prefdm (#16464)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - handle "gw x.x.x.x" as the last pair of flags in ifup-routes (#18804)
  - fix top-level makefile install target
  - make usernetctl just fall-through if getuid() == 0


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - changed hdparm section in rc.sysinit to allow different
    parameters for each disk (if needed) by copying
    /etc/sysconfig/harddisks to /etc/sysconfig/harddiskhda (hdb,hdc..)
  - fix RFE #20967


author: Bill Nottingham <notting@redhat.com>
changelog:
  - only load sound if persistent DMA buffers are necessary
  - fix lots of bugs: #18619, #21187, #21283, #12097
  - integrate MAXFAIL option for ppp-watch
  - don't load keymaps/fonts on a serial console


author: Bill Nottingham <notting@redhat.com>
changelog:
  - do LVM setup through normal initscripts mechanisms
  - ignore backup files in /etc/sysconfig/network-scripts
  - lots of .po file updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add plusb support (#18892, patch from <eric.ayers@compgen.com>)
  - don't ignore RETRYTIMEOUT when we never connect (#14071, patch from
    <ak@cave.hop.stu.neva.ru>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - various init.d/functions cleanups (#10761, from <mjt@tls.msk.ru>)
  - in daemon(), only look at pidfile to determine if process is running
    (#17244, others)
  - ifup-ppp enhancements (#17388, from <ayn2@cornell.edu>)
  - ipv6 support (#23576, originally by Peter Bieringer <pb@bieringer.de>)
  - lots of other minor fixes (see ChangeLog)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - modify firewall on ifup to allow any new DNS servers through (#25951)
  - don't muck with the font in lang.csh/lang.sh (#26349)
  - don't display Japanese if we aren't on a pty (#25041)
  - load ide-scsi if passed on /proc/cmdline


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add all save changes for s390 s390x that won't break anything
    patches are from Oliver Paukstadt @ millenux.com


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make pidofproc() and killproc() try to use the PID associated with the full
    pathname first before killing the daemon by its basename (for daemons that
    share the same basename, i.e. "master" in postfix and cyrus-imapd) (#19016)
  - fix status() as well


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix some substitions in init.d/functions (fixes various killproc issues)
  - make sure ipv6 module alias is available if configured
  - fix initlog segfaults in popt when called with bogus stuff (#28140)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run isapnp on isapnp-enabled 2.4 kernels (part of #29450)
  - disable hotplug during network initscript
  - don't munge wireless keys in ifup; that will be done with the
    PCMCIA wireless stuff
  - run sndconfig --mungepnp for non-native-isapnp soundcards
  - don't explicitly kill things in init.d/single, init will do it
  - don't explicitly load usb-storage; mount the usbdevfs before initializing
    host controller modules


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - usernetctl, ppp-watch: cleanups
  - netreport: use O_NOFOLLOW
  - ifup-ppp: let ppp-watch watch over demand-dialed connections (#28927)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - IPv6 fixes (#30506)
  - make static-routes handling more sane and consistent (#29500, #29549)
  - handle multiple USB controllers *correctly*


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - copyright: GPL -> license: GPL
  - fix a syntax error in lang.csh
  - skip commented-out i18n configuration lines in lang.csh


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't run ifup ppp0 if ppp-watch gets SIGINT (#40585, ak@cave.hop.stu.neva.ru)
  - fix do_netreport (#37716, #39603 <crlf@aeiou.pt>)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - reenable pump, but make sure dhcpcd is the default. This
    way, upgrades of systems without dhcpcd has a better chance at
    working.


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - disable hwclock on S390 (no such executable)
  - Fix up kernel versioning on binary-only modules (S390)
  - don't use newt scripts on S390 console


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix '--check'
  - prereq sh-utils (#43065)
  - fix some invocations of reboot/halt (#45966)
  - fix typo in ifup-wireless
  - don't muck with /etc/issue each boot
  - big IPv6 update (<pekkas@netcore.fi>)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - own some more directories
  - use -O nonetdev, require mount package that understands this
  - fix do_netreport when called as non-root
  - remove ip addresses from interfaces on ifdown
  - oops, fix ifup/ifdown


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update netdev stuff to use _netdev
  - IPv6 updates (<pekkas@netcore.fi>)
  - fix downing of devices with static IPs (#49777, #49783)
  - put ifcfg-lo back in the package


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't use kbd commands in setsysfont now that we've switched back to
    console-tools (#50075)
  - sleep in check_link_down; some devices require it
  - only bring link down if check_link_down fails


author: Bill Nottingham <notting@redhat.com>
changelog:
  - honor HOTPLUG=no if running under hotplug (#47483)
  - use awk, not grep, for modprobe -c checks (#49616)
  - don't print ugly messages for the case where the device doesn't exist,
    and there is no alias (i.e., PCMCIA ONBOOT=yes (#various))
  - run kbdconfig in /.unconfigured mode (#43941)
  - use a bigger buffer size argument to dmesg (#44024)
  - detach loopback devices on shutdown (#43919, #45826)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - tweak raittab grep slightly (#51231)
  - allow resetting of default route for DHCP addresses (#48994)
  - save resolv.conf in ifup-ppp for restoration by ifdown-post (#50759)
  - when munging firewall rules for dns, only allow dest ports 1025-65535 (#44038, #40833)
  - allow shell characters in ppp names (#43719)
  - allow setting DHCP arguments, just kill dhcpcd instead of using -k (#46492)
  - behave sanely if ifup called when dhcpcd is running (#49392, #51038)


author: Than Ngo <than@redhat.com>
changelog:
  - don't set MSN if it' empty (it's now optional)
  - don't give login name as a cmdline-option (Bug #23066)
  - remove peer device file if ppp connection is down
  - fix channel bundling


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add is_available() network function, use it; cleans up ugly modprobe
    error messages
  - update translation info
  - fix #51787


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix a broken call to check_device_down
  - make all loopback addresses have host scope, not global scope.
    Fixes #49374, possibly others


author: Bill Nottingham <notting@redhat.com> 6.31-1
changelog:
  - message un-tweaks (<johnsonm@redhat.com>)
  - make getkey more useful, fix some of the autofsck stuff (<johnsonm@redhat.com>)


author: Than Ngo <than@redhat.com>
changelog:
  - add ISDN patches from pekkas@netcore.fi and pb@bieringer.de (bug #52491)
  - fix handling of ISDN LSZ Compresssion


author: Mike A. Harris <mharris@redhat.com> 6.55-1
changelog:
  - Removed process accounting stuff from rc.sysinit and halt scripts as it is
    now handled by the psacct initscript in the psacct package


author: Bill Nottingham <notting@redhat.com> 6.56-1
changelog:
  - use nameif for interfaces where we don't agree on HWADDR with the
    config file (<harald@redhat.com>)
  - LSB support tweaks


author: Bill Nottingham <notting@redhat.com> 6.62-1
changelog:
  - delete X/VNC locks on startup (#63035)
  - shut up DMA disabling, move it to after ide-scsi (#62873, #62956)
  - use full path to /sbin/ifconfig (#59457)
  - /sbin/service: change to root directory before staring/stopping;
    also sanitize environment


author: Bill Nottingham <notting@redhat.com> 6.63-1
changelog:
  - ipcalc cleanups (#58410)
  - quit stripping binaries
  - do LVM init after RAID init too (#63238)
  - export all locale variables (#56142)
  - run sysctl -p after network init as well


author: Bill Nottingham <notting@redhat.com> 6.64-1
changelog:
  - make sure chatdbg is set before using it (#63448, <Bertil@Askelid.com>)
  - allow tweaking of more devices with hdparm (#53511), and
    tweak non-disk devices iff they explicitly have a config file
    for that device (#56575, #63415)
  - some translation updates


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - start some sh coding cleanups
  - change to /etc/init.d/functions
  - eliminate some un-necessary PATH settings
  - eliminate some TEXTDOMAIN settings


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - rc.sysinit: do not load raid modules unless /etc/raidtab exists
  - many cleanups for more consistent shell programming and also
    many smaller speedups within network scripts, no un-necessary sourcing
    of files etc
  - nearly re-code /etc/rc.d/rc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - allow an option for ups poweroff  #68123
  - change grep for ONBOOT=  #63903
  - allow building with a cross-compiler  #64362,#64255
  - faster check in network-functions:check_default_route()
  - better checks for backup files
  - drastically reduce the number of consoletype invocations
  - do not export "GATEWAY" in network-functions
  - code cleanups in rc.sysinit


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - /etc/init.d/functions:
    daemon(): avoid starting another bash
    killproc(): avoid starting another bash for the default case
  - do not call "insmod -p" before loading the "st" module


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - /sbin/service: set PATH before calling startup scripts
    HOME and TERM are also set during bootup, but they should not make
    a difference for well-written daemons.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - require /etc/redhat-release (#68903)
  - fix tty2-tty6 (sort of)
  - fix iptables invocations (#70807, #71201, #68368)
  - other minor tweaks


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't cycle through eth0-eth9 on dhcp link check (#68127)
  - don't retry indefinitely on ppp startup
  - activate network profile passed on kernel commandline via netprofile=
  - fix iptables invocations again
  - translation refresh


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't infinite loop on ifdown
  - remove disabling of DMA; this can cause problems
  - move swap startup to after LVM (#66588)


author: Bill Nottingham <notting@redhat.com> 6.96-1
changelog:
  - fix various static-routes brokeness (#74317, #74318, #74320, #76619,
    - fix handling of SYSFONTACM in setsysfont (#75662)
  - fix lang.csh for CJK (#76908, <ynakai@redhat.com>)
  - IPv6 update (<pekkas@netcore.fi>, <pb@bieringer.de>)
  - other minor tweaks


author: Bill Nottingham <notting@redhat.com> 6.97-1
changelog:
  - IPv6 update (<pekkas@netcore.fi>, <pb@bieringer.de>)
  - devlabel support (<Gary_Lerhaupt@Dell.com>)
  - do lazy NFS umounts


author: Bill Nottingham <notting@redhat.com> 7.00-1
changelog:
  - tweaks for potential GUI bootup
  - loop checking for network link state, don't unilterally wait five
    seconds


author: Bill Nottingham <notting@redhat.com> 7.03-1
changelog:
  - move system font setting sooner (<milan.kerslager@pslib.cz>)
  - fix link checking for dhcp, use both ethtool and mii-tool
  - fix CJK text on the console, and locale-archive held open
    on shutdown
  - IPv6 updates <pekkas@netcore.fi>, <pb@bieringer.de>
  - speedup tweaks (<drepper@redhat.com>)
  - use glib2 for ppp-watch (#78690, <kisch@mindless.com>)
  - add zeroconf route (#81738)
  - fix ifup-ppp for dial-on-demand, and onboot (<goeran@uddeborg.pp.se>)
  - tweak raidtab parsing, don't worry about not-in-fstab RAID devices
    (#71087, #78467, <aja@mit.edu>)
  - don't automatically bring up aliases if 'ONPARENT=no' is set (#78992)
  - getkey cleanups/tweaks (#76071, <ben@enchantedforest.org>)
  - rework halt_get_remaining (#76831, <michal@harddata.com>)
  - ipcalc: fix calculation of /32 addresses (#76646)
  - various other tweaks and fixes


author: Bill Nottingham <notting@redhat.com> 7.04-1
changelog:
  - tweak some translatable strings
  - fix for rc.sysinit on machines that pass arguments to mingetty
    (<nalin@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.07-1
changelog:
  - fix nicknames & profiles (#82246)
  - fix check_device_down (#83780, <pzb@datstacks.com>)
  - vlan fixes (<tis@foobar.fi>)
  - fix groff macros (#83531, <tsekine@sdri.co.jp>)
  - various updated translations
  - fix checkpid for multiple pids (#83401)


author: Bill Nottingham <notting@redhat.com> 7.08-1
changelog:
  - load keybdev & mousedev even if hid is already loaded/static
  - run fewer scripts through action (#49670, #75279, #81531)


author: Bill Nottingham <notting@redhat.com> 7.09-1
changelog:
  - initialize two ttys past # of mingettys (for GDM)
  - fix zeroconf route
  - redhat-config-network writes $NAME.route for some static routes
    (e.g., ppp); handle that (#84193)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - init.d/network: don't advertise "probe: true" in the header if we don't
    recognize "probe" as an argument


author: Karsten Hopp <karsten@redhat.de> 7.15-1
changelog:
  - Mainframe has no /dev/ttyX devices and no mingetty, don't
    initialize them. This gave error messages during startup


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - sysconfig/init.s390: set LOGLEVEL=3 as for other archs
  - rc.d/init.d/network, rc.d/rc: change confirmation mode to
    not use an environment variable
  - rc.d/init.d/functions: make strstr() even shorter, remove old
    "case" version that has been already commented out
  - rc.d/rc.sysinit:
    - no need to set NETWORKING=no, it is not used/exported
    - do not export BOOTUP
    - delete two "sleep 1" calls that wants to add time to go
      into confirmation mode. There is enough time to press a
      key anyway or use "confirm" in /proc/cmdline.
    - read /proc/cmdline into a variable
    - use strstr() to search in /proc/cmdline
    - add "forcefsck" as possible option in /proc/cmdline
    - while removing lock files, no need to call `basename`
    - add unamer=`uname -r` and reduce number of forks
    - do not fork new bash to create /var/log/ksyms.0


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - initscripts-s390.patch: remove not needed parts about PNP=
  - inittab.390: sync with normal version
  - rc.sysinit: remove two further calls to /sbin/consoletype with $CONSOLETYPE


author: Bill Nottingham <notting@redhat.com> 7.25-1
changelog:
  - fix DNS punching in the case of other rules for the DNS server
    (#97686, <martin@zepler.org>)
  - initlog, ppp-watch, and usernetctl tweaks (<linux_4ever@yahoo.com>)
  - fix grep for mingetty (#97188)
  - fix rhgb-client bad syntax
  - change network device searching, use correct naming, fix route issues
    (<harald@redhat.com>)
  - other random tweaks


author: Bill Nottingham <notting@redhat.com> 7.26-1
changelog:
  - ipsec support (see sysconfig.txt, ifup-ipsec)
  - read $CONFIG.keys, for non-world-readable keys
  - allow default window size for routes to be set with WINDOW= (#98112)
  - support setting device options with ethtool opts
  - fix s390 bootup spew (#98078)
  - support renaming interfaces with nameif based on hwaddr


author: Bill Nottingham <notting@redhat.com> 7.27-1
changelog:
  - add a check to consoletype for the current foreground console
  - use it when running unicode_start (#98753)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - ifup-routes: pass the interface name to handle_file() so that we don't try
    to use the routes file's name as an interface name


author: Bill Nottingham <notting@redhat.com> 7.29-1
changelog:
  - setsysfont: don't echo to /dev/console (#102004)
  - fix ethernet device renaming deadlock (#101566)
  - consoletype: don't return 'vt' on vioconsole (#90465)
  - ifup: fix short-circuit (#101445)


author: Bill Nottingham <notting@redhat.com> 7.31-1
changelog:
  - fix bonding + dhcp (#91399)
  - fix typo (#103781)
  - sysconfig/network-scripts/ifup: fix use of local

  - fix shutdown with NFS root (#100556, <Julian.Blake@cern.ch>)
  - remove /var/run/confirm when done with /etc/rc (#100898)
  - ipcalc: fix some memory handling (#85478, <miked@ed.ac.uk>)
  - handle sorting > 10 network devices (#98209)
  - unset ONPARENT after use (#101384)
  - random other fixes
  - bridging support (<dwmw2@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.44-1
changelog:
  - NFSv4 support (<chucklever@bigfoot.com>, <steved@redhat.com>)
  - handle 2.6-style 'install ethX ...' lines correctly
  - mount sysfs by default
  - time to clean up the cruft. remove:
    - boot-time depmod
    - linking of /boot/System.map to /boot/System.map-`uname -r`
    - /var/log/ksyms.X
    - libredhat-kernel support


author: Bill Nottingham <notting@redhat.com> 7.47-1
changelog:
  - translation: catch more input strings (#106285, <mitr@volny.cz>)
  - remove autologin from prefdm (#108969)
  - return to rhgb after ./unconfigured (#109807, <jkeating@j2solutions.net>)
  - handle iso15 in setsysfont (#110243)
  - clean up samba & vmware in rc.sysinit (#113104)
  - some sysconfig.txt documentation (#110427, #118063)
  - fix bug in umount-on-halt (#113088, <giardina@airlab.elet.polimi.it>)
  - handle CIFS in netfs (#115691)
  - make sure hotplug isn't stuck unset (#116666, <aoliva@redhat.com>)
  - handle network fs better in rc.sysinit (#111290)
  - nomodules applies to usb/firewire too (#113278)
  - ipsec fix (#116922, <felipe_alfaro@linuxmail.org>)
  - make sure rc exits cleanly (#117827, <enrico.scholz@informatik.tu-chemnitz.de>)
  - fsck root FS from initrd, for dynamic majors (#117575, <sct@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 7.49-1
changelog:
  - use alsa for mixer saving in halt
  - don't umount /proc in halt (#118880)
  - various translation updates from translators


author: Bill Nottingham <notting@redhat.com> 7.50-1
changelog:
  - fix LVM issues in rc.sysinit (#120458, #119975)
  - deal with fixed racoon parser
  - translation updates from translators
  - fix USB loading (#120911)


author: Bill Nottingham <notting@redhat.com> 7.51-1
changelog:
  - get rid of LVM error when no volumes are defined (#121197)
  - fix selinux short-circuit test (#121143, <michal@harddata.com>)
  - /dev/mapper/control is a special file, check it accordingly (#121963)
  - support ETHTOOL_OPTS on bonding slaves (#119430, <hrunting@texas.net>)
  - handle multiple spaces correctly in rc.sysinit, network-functions
    (#118583, <pallas@kadan.cz>)
  - cleanup fd leaks, mem leaks, other bogosities
    (#119987, <linux_4ever@yahoo.com>)
  - rc.d/init.d/network: remove ipv6 bogosity (#114128)
  - translation updates


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix bridging confusing module order (#122848, <luto@myrealbox.com>)
  - rc.d/rc.sysinit: don't mount cifs (#122501)


author: Bill Nottingham <notting@redhat.com> 7.58-1
changelog:
  - rc.d/rc.sysinit: hack: make ICE directory on boot (#86480)
  - set devicetype for xDSL (#126194)
  - ignore locking failures when starting lvm volumes (#126192, <radu@primit.ro>)
  - unset LC_MESSAGES for rhgb (#126020, <ynakai@redhat.com>)
  - bonding fixes
  - setsysfont: remove error (#100559)
  - remove duplicate setting of network routes (#125450)
  - vlan fixes (#107504, <hrunting@texas.net>)
  - ifup-aliases: remove bogus route setting (#120908)


author: Bill Nottingham <notting@redhat.com> 7.59-1
changelog:
  - set context on ICE directory after making it (#127099, <concert@europe.com>)
  - don't mount GFS filesystems in rc.sysinit


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix bonding + no IP (#127285)
  - wrap second LVM initialization in vgscan check to avoid extraneous messages (#127639)


author: Bill Nottingham <notting@redhat.com> 7.62-1
changelog:
  - fix up resolv.conf munging (#129921)
  - use rngd if available
  - run start_udev if necessary (#120605)
  - readonly root updates (#129893, <markmc@redhat.com>)
  - ifup-wireless: quote key (#129930)
  - remove rawdevices (#130048)
  - handle binfmt_misc in rc.sysinit for the case where it's built in (#129954)
  - remove mkkerneldoth
  - don't remove linguas in lang.* (part of #9733)
  - fix nfs unmounting (#129765)
  - fix URL (#129433)


author: Jason Vas Dias <jvdias@redhat.com> 7.66-1
changelog:
  - Allow users to use generic /etc/dhclient.conf if per-device
  - /etc/dhclient-${DEVICE}.conf is non-existent or empty


author: Jason Vas Dias <jvdias@redhat.com> 7.67-1
changelog:
  - fix change_resolv_conf: if pre-existing /etc/resolv.conf
  - non-existent or empty, replace with new file contents.


author: Bill Nottingham <notting@redhat.com> 7.70-1
changelog:
  - autoload hardware modules on startup
  - minor fsck cleanup (#115028, <leonard-rh-bugzilla@den.ottolander.nl>)
  - ifup: support STP bridging (#123324)
  - rc.sysinit: do a SELinux relabel if forced
  - rc.sysinit: remove devfs compat and the remaining 2.4 compat
  - ifup-wireless: support multiple keys (#127957)
  - fix firmware loading (#129155, <bnocera@redhat.com>)


author: Jason Vas Dias <jvdias@redhat.com> 7.73-1
changelog:
  - Add support for running the DHCPv6 client to ifup
  - (new DHCPV6C=yes/no ifcfg-${IF} variable) + update sysconfig.txt


author: Bill Nottingham <notting@redhat.com> - 7.77-1
changelog:
  - mount usbfs (#131347)
  - start any automatic raid devices
  - remove triggers for ancient releases, bulletproof remaining ones (#131356)


author: Dan Walsh <dwalshg@redhat.com> - 7.78-2
changelog:
  - fix setting SELinux contexts on udev-created-in-initrd devices
  - Let restorecon check if selinux is enabled.


author: Bill Nottingham <notting@redhat.com> - 7.82-1
changelog:
  - fix handling of nonexistent devices (#132839)
  - rhgb enhancements (<veillard@redhat.com>, #132665)
  - initscripts.spec: require nash (#132513)
  - translation updates


author: Bill Nottingham <notting@redhat.com> - 7.85-1
changelog:
  - ifup, network-functions: fix worked-by-accident shell quoting
  - lang.csh: remove setting of dspmbyte (#89549, <mitr@redhat.com>)
  - SELinux fixes
  - clean up prefdm
  - init.d/functions: export LC_MESSAGES (#133786)
  - allow daemon to coredump if requested (#130175)
  - network-functions: be more liberal in what we accept for link types (#90602, #127984)
  - fix overzealousness with -range aliases (#65415)
  - rc.sysinit: use s-c-keyboard, not kbdconfig (#133929)
  - fix checkpid logic, clean up potential errors (#134030)
  - translation updates


author: Bill Nottingham <notting@redhat.com> - 7.86-1
changelog:
  - use /etc/hotplug/blacklist to blacklist modules in hardware init (#132719)
  - filter indic locales on the console (#134198)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - use runuser instead of su; require it
  - init.d/halt: use right file name for random seed (#134432)


author: Bill Nottingham <notting@redhat.com> 7.91-1
changelog:
  - rc.d/rc.sysinit: remove devlabel call
  - mdadm support, now that raidtools is gone (#126636, #88785)
  - call ipv6to4 scripts in /etc/ppp/(ip-up|ip-down) (#124390, <dwmw2@redhat.com>)
  - cleanup a couple of nits that could affect bug #134754
  - make sure we return to rhgb after fsck (#133966, #112839, #134449)
  - automatically reboot when fsck calls for it, instead of requiring
    manual intervention (#117641 and duplicates)
  - ifup-wireless: fix key for open vs. restricted (#135235, <dax@gurulabs.com>)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 7.93.2-1
changelog:
  - fix prefdm fallback to installed display managers (#137274)
  - fix incorrect rhgb temporary path (#137391)


author: Florian La Roche <laroche@redhat.com>
changelog:
  - /etc/rc.d/rc: use "LC_ALL=C grep" for small speedup
  - /etc/rc.d/rc.sysinit:
    - do not read udev.conf, this seems to be all in the start_udev script
    - fix detection of "nomodules" kernel command line option
    - read /proc/cmdline earlier and convert rhgb to use that, too
    - load_module(): change redirection to /dev/null
    - some checks for RHGB_STARTED="" looked strange
  - /etc/sysconfig/network-scripts/ifup-ppp:
    - remove a call to basename with shell builtins
  - /etc/sysconfig/network-scripts/network-functions:
    - remove some calls to basename/sed with shell builtins


author: Bill Nottingham <notting@redhat.com>
changelog:
  - take an axe to rc.sysinit:
    - remove delay on unclean startup
    - remove hdparm code
    - remove LVM1 code
    - remove old raidtab code in favor of mdadm
    - remove support for old isapnp tools
    - move all block device mangling before fsck. run fsck *once*, not twice
    - some more LC_ALL=C stuff


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix check_link_down to still check negotiation if link is
    listed as "up" on entering (#110164, <dbaron@dbaron.org>)


author: Bill Nottingham <notting@redhat.com> 7.98-1
changelog:
  - various kmodule speedups
  - rc.d/init.d/netfs: don't mount GFS (#140281)
  - fix various minilogd bogosities (#106338)


author: Bill Nottingham <notting@redhat.com> 8.02-1
changelog:
  - remove initlog, minilogd
  - add a flag to kmodule for use with kudzu's socket mode, use it
  - change setting of IPv6 default route (#142308, <pb@bieringer.de>)
  - netfs: don't unmount NFS root FS (#142169)


author: Bill Nottingham <notting@redhat.com> 8.03-1
changelog:
  - use udevsend to handle hotplug events (requires recent udev)
  - remove pump, dhcpcd support
  - fix ONxxx (#136531, <cww@redhat.com>)
  - fix various fgreps to not catch commented lines (#136531, expanded
    from <cww@redhat.com>)
  - set ETHTOOL_OPTS on addressless devices (#144682, <mpoole@redhat.com>)
  - kill dhcp client even if BOOTOPROTO is now static (#127726, others)
  - replace the use of route/ifconfig with ip in IPv6 code, remove support
    for ipv6calc (<pb@bierenger.de>, <pekkas@netcore.fi>)
  - fix quoting in daemon() (#144634)
  - make sysctl be silent (#144483)


author: Bill Nottingham <notting@redhat.com> 8.04-1
changelog:
  - split out ifup/ifdown general case to ifup/ifdown-eth;
    add ifup/ifdown-bnep (<dwmw2@redhat.com>)
  - ifup-ipsec: add fwd policies (#145507)
  - fix multiple scsi_hostadapter loads (#145432)
  - enable syncookies in sysctl.conf (#145201)


author: Bill Nottingham <notting@redhat.com> 8.05-1
changelog:
  - ipv6 cleanups (<pb@bieringer.de>)
  - rc.sysinit: fix rngd check (#130350)
    ... then turn it off entirely
  - rc.sysinit: get rid of duplicate date printout (#149795)
  - ifdown: handle being called on down devices better
  - handle saved resolv.conf on all device types
  - fix network-functions cleanup
  - netfs: fix _netdev unmounting (#147610, <alewis@redhat.com>)
  - dhcp release cleanups (<jvdias@redhat.com>)
  - ifup-bnep: bluetooth update <dwmw2@infradead.org>
  - more ipsec stuff (#147001, <ckjohnson@gwi.net>)


author: Bill Nottingham <notting@redhat.com> 8.06-1
changelog:
  - handle alternate VLAN naming schemes (#115001, <kas@informatics.muni.cz>)
  - ifup-ipsec: handle non-ascii keys (#150552)
  - add proper ipsec route (#146169, #140654)
  - add a restorecon for /tmp to rc.sysinit
  - document ONHOTPLUG in sysconfig.txt
  - fix mistranslation (#151120)
  - don't return 1 for stopping a process if it isn't running at all
  - don't explicitly set fwd polices for ipsec traffic. Let setkey
    handle it.


author: Bill Nottingham <notting@redhat.com> 8.08-1
changelog:
  - update translation base
  - automatically send hostname for DHCP if it's available and not
    overridden (#149667)
  - load user-defined module scripts from /etc/sysconfig/modules at
    boot (#123927)
  - halt: reverse sort the mount list, avoiding errors
    (#147254, <jamesodhunt@hotmail.com>)
  - ifup-wireless: add SECURITYMODE (#145407)
  - network-functions: don't error out if hotplug doesn't exist (#140008)
  - ifup: always return errors on trying to bring up nonexistent devices (#131461)
  - ifup: fix error message (#143674)
  - rc.sysinit: add a autorelabel boot target (#154496)
  - prefdm: if something else is specified as $DISPLAYMANAGER, try that (#147304)
  - remove support for the old firewall type
  - network: optimize some (#138557, <drepper@redhat.com>)
  - prefdm: fix prefdm arg handling (#154312, <khc@pm.waw.pl>)
  - gdm early-login support (adapted from <rstrode@redhat.com>)
  - ifup-routes: make sure commented lines are handled correctly (#154353,
    - some sysconfig.txt updates (<link@pobox.com>, <jvdias@redhat.com>)
  - rc.sysinit: fix restorecon invocation (#153100)
  - initlog: free some of the more egregious memory leaks (#85935)
  - initlog: fix potential memory overread (#153685, <in-redhat@baka.org>)
  - remove some conflicts, %post scripts, etc. that were only relelvant
    for upgrades from pre-7.0
  - other minor fixes, see ChangeLog


author: Bill Nottingham <notting@redhat.com> 8.09-1
changelog:
  - rc.sysinit: clean up screen sockets (#155969)
  - functions: use pidof -c in various functions
  - ifup-ppp: fix static routes with ppp demand dialing (#20142,
    <ohrn+redhat@chalmers.se>)
  - add btmp support (#155537)
  - don't send dhcp hostname (revert of fix for #149667)
  - more early-login modifications (<mclasen@redhat.com>)
  - functions: fix echo (#155270)


author: Bill Nottingham <notting@redhat.com> 8.11-1
changelog:
  - fix mis-bringup of interfaces due to accidentally matched HWADDR
    (a.k.a. ONBOOT=no not working) (#153669, #157252)
  - support automatic relabeling later if rebooted w/o SELinux
    (<dwalsh@redhat.com>)
  - rc.sysinit: fix fixfiles invocation (#157182)
  - btmp should be 0600 (#156900)
  - translation updates: fr, bg, ru, mk, pa, es


author: Bill Nottingham <notting@redhat.com> 8.12-1
changelog:
  - ifup-eth: fix interface renaming (#158774)
  - rc.sysinit: use modprobe, not insmod (#159120, <tmus@tmus.dk>)
  - remove workaround for the fonts-not-initialized-on-secondary-consoles
    problem (fixed in 2.6.12-rc4 and later)
  - setsysfont: correctly bracket systfontacm (#159706)
  - rc.sysinit: always use udevsend, even if no modules (#160987)
  - ifdown-aliases: add 'cd' to the proper dir (#161170)
  - add diskdump restore support (<tuchida@redhat.com>),
    conflict with appropriate diskdumputils
  - rc.sysinit: dmraid/multipath support
    - remove LVM1 support
  - init.d/functions: handle odd quoting in args (#161316, <stransky@redhat.com>)
  - ifup-wireless: set rate in quotes (#163123)
  - handle lvm & fsck for network block devices (#148764,
    <alewis@redhat.com>)
  - initlog: fix invalid free calls,  (#165033), (#163973,<dwalsh@redhat.com>)
  - sysconfig.txt: remove hdparm docs, since the code isn't there (#162962)
  - updated translations: ms, ja, ko, et, zh_CN, zh_TW, sr, ar


author: Bill Nottingham <notting@redhat.com>
changelog:
  - kmodule: don't probe for uninteresting devices. speeds things up
  - network-functions: deal with broken networks better (#168947)
  - rc.sysinit: automatically reboot if labels are really out of date
    (<dwalsh@redhat.com>)
  - network-functions: throw out nameif error messages
  - rc.sysinit: use multipath.static (#168321)
  - rc.sysinit: use ignorelocking (#168195)


author: Bill Nottingham <notting@redhat.com> 8.17-1
changelog:
  - make sure corefile limiting works for user processes as well
    (#166511, <ville.skytta@iki.fi>)
  - ifup-routes: handle no EOF in the route file (#156972)
  - rc.sysinit: tweak mesage (#156972)
  - ifdown-eth: clean up error message (#135167)
  - rc.sysinit: call kpartx on multipath devices (#160227)
  - ifup-eth: move wireless options before bridge options (#122801)
  - ifup-wireless: silence error (#90601)
  - init.d/functions: change translated string (#54682)


author: Bill Nottingham <notting@redhat.com> 8.19-1
changelog:
  - Require syslog, for alternate implementations thereof (#172885)
  - Fix fsck invocation for weeding out netdev devices (#175803)


author: Bill Nottingham <notting@redhat.com> 8.21-1
changelog:
  - move handling of network hotplug events here, add appropriate udev
    rules, obsolete hotplug
  - get rid of some path lookups (#178321, <mclasen@redhat.com>)
  - get hwaddrs from sysfs as opposed to ip | sed
  - translation updates
  - lang.sh: don't run unicode_start for subshells (#176832)
  - halt: ignore sysfs but not /sys<otherstuff> (#177612, <bnocera@redhat.com>)
  - add service(8) man page (#44857) <mitr@redhat.com>


author: Bill Nottingham <notting@redhat.com> 8.22-1
changelog:
  - remove references to /usr/X11R6/bin (#177938)
  - rc.sysinit: fix SELinux message formatting (#178532)
  - rc.sysinit: clean cvs as well (#178539, <ville.skytta@iki.fi>)
  - init.d/halt: move halt.local so that it runs before /  is remounted r/o (#179314)
  - rc.sysinit: don't activate already active dmraids (<pjones@redhat.com>)
  - rc.sysinit: don't mount usbfs, libusb no longer uses it
  - init.d/functions: Add -p to status() (#134363, <mitr@redhat.com>)
  - init.d/functions: Separate /var/run/*.pid handling and pidof calls
    to private functions (#63440, <mitr@redhat.com>)
  - init.d/functions: update for current LSB, including -p pidfile
    (#99325, #134363, <mitr@redhat.com>, <tobias.burnus@physik.fu-berlin.de>)
  - getkey: various cleanups, add man page (#54481, <mitr@redhat.com>)
  - lang.sh: don't always call consoletype (<laroche@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.26-1
changelog:
  - revert "rc.sysinit: don't mount usbfs, libusb no longer uses it" change
  - add some ugly hacks to make sure net hotplug doesn't run after unclean
    shutdown (#177795)
  - don't mount /sys and /proc in rc.sysinit - the initrd already does
    (<pjones@redhat.com>)
  - halt: try to unmount tmpfs filesystems before swapoff (#174000,
    <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.27-1
changelog:
  - translation updates
  - lang.sh: revert fix for #176832, it's broken
  - ifup-aliases fixes (<pjones@redhat.com>,<mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.28-1
changelog:
  - kill nash-hotplug before starting udev (<pjones@redhat.com>)
  - silence warnings on /dev/pts remount (<pjones@redhat.com>)
  - more translation updates


author: Bill Nottingham <notting@redhat.com> 8.30-1
changelog:
  - hotplug: don't cause modules to be reloaded on ifdown/rmmod (#179809)
  - fix endless loops in ifup/ifdown (#177792, #182466)
  - fix enabling of enforcing SELinux mode after relabel (#181893)
  - remove debugging code from ifup-bnep
  - add /proc, /sys mounting back to rc.sysinit
    Note: booting without an initrd is deprecated
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.32-1
changelog:
  - netfs: fix redirect (#187505)
  - rc.sysinit add forcequotacheck (#168118, <mitr@redhat.com>)
  - functions/pidof: various fixes (#182623, others <mitr@redhat.com>)
  - add support for DHCP on bridges (#125259, <mitr@redhat.com>,
    anders@kaseorg.com>)
  - rc.sysinit: use pidof, not killall (#185429, <pjones@redhat.com>)
  - ppp fixes (#129195, #163950, #92023, <mitr@redhat.com>, <avi@argo.co.il>)
  - ifup/ifdown: unset $WINDOW (#174336, <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.33-1
changelog:
  - support for readonly root
  - rc.sysinit: remove call to zfcpconf.sh - that should be udev rules
  - ifup*: add NETWORKDELAY and LINKDELAY (#176851, <mitr@redhat.com>)
  - rc.sysinit: remove obsolete initrd code (<pjones@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.34-1
changelog:
  - link glib2 dynamically now that it's in /lib, conflict with older
    versions
  - handle cups specially when cleaning /var (#189168)
  - remove ifdown-aliases (<mitr@redhat.com>)
  - ifup-ipsec: fix key handling when only one of AH or ESP is used
    (#166257, <mituc@iasi.rdsnet.ro>)
  - IPv6 updates, including RFC 3041 support (<pb@bieringer.de>)
  - routing fixes, add METRIC support for default routes (#124045, <mitr@redhat.com>)
  - fix handling of mount points with white space (#186713, <mitr@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.35-1
changelog:
  - readonly root enhancments (modified from <law@redhat.com>, #193164)
  - encrypted swap, non-root filesystem support (#127378, <mitr@redhat.com, <redhat@flyn.org>)
  - clarify killproc usage (#193711, <mitr@redhat.com>)
  - document BRIDGE= (#192576, <mitr@redhat.com>)
  - rc.sysinit: allow for sulogin instead of automatic relabeling (<dwalsh@rehdat.com>)


author: Bill Nottingham <notting@redhat.com> 8.36-1
changelog:
  - rework automatic swapon - only run if AUTOSWAP=yes, and fix errors
    (#198695, #196179, #196208)
  - redo single so it starts last in runlevel 1, and doesn't kill/start
    services itself
  - add configurable delay for killproc() (#198429, <jorton@redhat.com>)
  - fix loop in rename_device (#199242, <markmc@redhat.com>)
  - rc.sysinit: stateless updates (#197972, <law@redhat.com>)
  - support for copying dhcp leases from initramfs (#198601, <markmc@redhat.com>)
  - readonly-root: SELinux works now in the kernel, allow it
  - init.d/network: don't bring down network if root is on a network device
  - init.d/halt: don't use -i to halt; causes problems with iscsi
  - add support for routing rule-$device (#132252, <mitr@redhat.com>)
  - fix rhgb output (#192604, <tonynelson@georgeanelson.com>)
  - fix crypttab options for LUKS (#197656, <mitr@redhat.com>)
  - ipsec: various fixes & new features (#150682, #168972, <mitr@redhat.com>, <alex@milivojevic.org>)
  - ipsec: add check for IKE_METHOD (#197576, <john_smyth@mail.ru>)
  - rename_device: ignore alias devices, fix race (#186355)
  - ifup/ifdown: don't mark as %config
  - rwtab: some additions/cleanup


author: Bill Nottingham <notting@redhat.com> 8.38-1
changelog:
  - translation updates
  - bring down bonding slaves on ifdown (#199706)
  - support LINKDELAY for dhcp (#191137)
  - netfs: run multipath on netdev devices (#180977)
  - halt: use /proc/mounts instead of /etc/mtab (#198426, <mitr@redhat.com>)
  - rc.sysinit: fix getkey race (#191453, <mitr@redhat.com>)
  - spec cleanups (#188614, <kloczek@rudy.mif.pg.gda.pl>)
  - support aliases on vlan (#193133, <mitr@redhat.com>)
  - clean up ifcfg file handling (<mitr@redhat.com>, <michal@harddata.com>)
  - GRE and IPIP tunnel support (#168990, <mitr@redhat.com>,
    <razvan.vilt@linux360.ro>, <aaron.hope@unh.edu>, <sean@enertronllc.com>)
  - rc.sysinit: don't format encrypted swap always (#127378)
  - don't try to add routes to alias devices (#199825, #195656)


author: Bill Nottingham <notting@redhat.com> 8.39-1
changelog:
  - translation updates
  - Handle partitions on multipath/dmraid better (<pjones@redhat.com>)
  - make /dev/mapper/control ourselves (<pjones@redhat.com>)
  - init.d/network: simplify 'status' call
  - fix actual 169.254 networks (#203591)
  - rc.sysinit: don't run vgscan (#191879)
  - init.d/halt: don't umount /dev/root<foo> (<oblin@mandriva.com>)
  - rc.sysinit: catch more dmraid errors (#200683)
  - support 'tmp' option in /etc/crypttab (#201382, <mitr@redhat.com>,
    <lv@lekv.de>)
  - IPv6 updates (<pb@bieringer.de>, includes a fix for #143452)


author: Bill Nottingham <notting@redhat.com> 8.40-1
changelog:
  - translation updates
  - rename_device: use '__tmpXXXX' instead of 'devXXXX' as a temporary device
    name to avoid any realistic namespace clashes
  - rc.sysinit: set default affinity if specified on commandline (#203359)
  - always pass path to '.' (#206035)
  - run setsysfont, loadkeys always when /dev/tty{0,1} exist (#150769)
  - allow going to a shell when system is shut down cleanly (from <dwalsh@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.41-1
changelog:
  - fix network ipv6 hang (#207137, others)
  - rc.sysinit: change blkid.tab path to /etc/blkid/blkid.tab
  - rename_device: reset DEVPATH also when renaming (#206884, <phil@fifi.org>)
  - sysconfig.txt: clarify onboot/onparent usage


author: Bill Nottingham <notting@redhat.com> 8.42-1
changelog:
  - run rc.sysinit, /etc/rc in monitor mode (part of #184340)
  - use a better check for 'native' services (#190989, #110761, adapted
    from <matthias@rpmforge.net>)


author: Bill Nottingham <notting@redhat.com> 8.43-1
changelog:
  - move ccwgroup initialization to a udev rule (should fix #199139,
    - init.d/functions: don't write to gdmfifo
  - remove unused-since-RHL-7 consolechars code, update docs (#206106)
  - stateless updates (#206331, <law@redhat.com>)
  - translation updates (el, ms, hr, sl)


author: Bill Nottingham <notting@redhat.com> 8.44-1
changelog:
  - separate tmpfs-usage for state from readonly-root
  - set keymap correctly in non-utf8 locale (#167363)
  - setsysfont: run unicode_stop if in non-unicode locale
  - lang.csh/lang.sh: set iutf8 if appropriate (#186961)
  - lang.csh/lang.sh: handle non-utf8 locales correctly (#200100)
  - rc.sysinit: redirect stderr from setsysfont (#209204, indirectly)
  - rwtab: fix iscsi file location (#208864)
  - translation updates: el, da, as, or
  - fix stateless updates (#206331, <law@redhat.com>)


author: Bill Nottingham <notting@redhat.com> 8.45-1
changelog:
  - lang.csh/lang.sh - do *not* stty iutf8; too much chaos with SIGTTOU
    (reverts: #186961; fixes #209469)
  - translation updates: ms


author: Bill Nottingham <notting@redhat.com> 8.46-1
changelog:
  - ifup-eth: restorecon on moved lease file
  - rc.sysinit: handle "nodmraid" and "nompath" command line options (#209377, <pjones@redhat.com>)
  - revert early-login support (#210836, essentially)
  - blacklist CJKI on the virtual console (#120819)
  - rc.sysinit: use dmraid.static (#211297)
  - use sysfs interface for bonding (#202443, <agospoda@redhat.com>)
  - use /etc/statetab, /etc/statetab.d for local state (#211839, <markmc@redhat.com>)
  - fix or_IN and similar locales (#212219)
  - use SUBCHANNELS as the primary key for s390 network devices (#204803)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.47-1
changelog:
  - lang.{sh,csh}: handle sinhalese as well in CJKI clauses (#212438)
  - rc.sysinit: add '--auto=yes' to mdadm invocation (#213671)
  - rename_device: fix incorrect handling of .bak files
  - mount tmpfs with -n (#213132)
  - various SUBCHANNELS related s390 fixage (#204803)
  - lang.{sh,csh}: support iso-8859-8 (#212738, <matan@svgalib.org>)


author: Bill Nottingham <notting@redhat.com> 8.48-1
changelog:
  - add a step to rename any temporarily renamed devices (#208740, #214817)
  - make sure network modules don't get accidentally reloaded (#211474)
  - rc.sysinit: fix dmraid test (#216334)
  - init.d/halt: don't unmount network filesystems
  - ipsec: Add a way to manually manage racoon.conf (#159343, <mitr@redhat.com>)
  - sysconfig.txt: Document ~/.i18n (#199323, <mitr@redhat.com>)
  - some translation updates


author: Bill Nottingham <notting@redhat.com> 8.49-1
changelog:
  - rc.sysinit: remove raidautorn (#219226)
  - ifup-eth: set MACADDR, MTU before initializing bonding slaves, etc (#218792)
  - translation updates: mr, ms, hi, te, ml


author: Bill Nottingham <notting@redhat.com> 8.50-1
changelog:
  - lang.csh, lang.sh: if $LANG is set, don't override it (#229102)
  - initlog.1: fix man page formatting (<esr@thyrsus.com>)
  - network-functions: simplify bonding test (#215887, <herbert.xu@redhat.com>)
  - fix ifup-post when lookup fails (#220318, <hiroshi.fujishima+redhat@gmail.com>)
  - add bridging docs (#221412, <markmc@redhat.com>)
  - release bonding slaves properly (#220525)
  - fix ppp-watch with ONBOOT=yes (#216749)
  - support VLAN_PLUS_VID_NO_PAD (#222975, #223011)
  - remove NETWORKING_IPV6; to disable, use a modprobe rule
  - translation updates: ms, de, el, pt_BR, fi, bs, sr, it, ko


author: Bill Nottingham <notting@redhat.com> 8.51-1
changelog:
  - fix 'Fedora Fedora' in rc.sysinit
  - halt: use kexec -x to not shut down network (#223932, <mchristi@redhat.com>)
  - network_functions: fix is_bonding_device logic (#229643)
  - translation updates: nb


author: Bill Nottingham <notting@redhat.com> 8.52-1
changelog:
  - lang.sh: fix locales where SYSFONT is not the default (#229996)
  - ifup-wireless: properly quote arguments (#234756)
  - readonly-root: add options for mounting state (#234916)
  - rwtab: updates (#219339, <law@redhat.com>)
  - add netconsole init script (#235952)
  - disable link checking when PERSISTENT_DHCLIENT is set (#234075)
  - restore file context on /etc/resolv.conf (#230776, <dwalsh@redhat.com>)
  - ifup-post: only use the first address (#230157, <michal@harddata.com>)
  - ifup-ipsec: allow overriding of my_identifier (#229343, <cmadams@hiwaay.net>)
  - ifup-wireless: set link up before itweaking wireless parameters (#228253)
  - rc.sysinit: restorecon on mount points when relabeling (#220322)
  - init.ipv6-global: cleanup & optimize sysctl usage (#217595)
  - ifup-eth: support ETHTOOL_OPTS on bridge devices (#208043, <bbaetz@acm.org>)
  - network-functions-ipv6: as we don't use NETWORKING_IPV6, silence errors (#195845)
  - fix description (#229919)
  - translation updates


author: Bill Nottingham <notting@redhat.com> 8.53-1
changelog:
  - init.d/halt: use sound saving wrapper from alsa-utils, conflict with
    older versions (#236916)
  - usernetctl: drop user gid (#229372)
  - translation updates: ta, pt_BR, nb, as, hi, de


author: Bill Nottingham <notting@redhat.com> 8.54-1
changelog:
  - translation updates: as, bg, cs, ja, ms
  - redirect bogus errors from cryptsetup to /dev/null <karsten@redhat.com>


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - avoid calling unicode_start unnecessarily often during startup/shutdown which
    causes certain monitor/video card combos to flicker heavily (#237839)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add /etc/networks (#239602)
  - rc.sysinit: fix quotacheck, remove obsolete convertquota (#249003, <tometzky@batory.org.pl>)
  - rc.sysinit: add gfs2 to the 'don't mount here' list (#248985)
  - netfs: check for rpcbind, not portmap (#245595)
  - ifup-eth: set 'primary' later for bonding devices (#236897, <agospoda@redhat.com>)
  - translation updates: cy, en_GB, mk, ml, ms, pl, sk, ta, zh_CN


author: Bill Nottingham <notting@redhat.com> - 8.56-1
changelog:
  - rename_device: fix open() call
  - rc.sysinit: optimize out some excess greps (<harald@redhat.com>)
  - halt: support newer nut syntax, conflict with old versions (#252973, <tsmetana@redhat.com>)
  - fix buildreq from popt -> popt-devel
   - newer popt is in /lib|/lib64 - require it, and link dynamically
  - rc.sysinit: added support for cryptsetup-uuids (bug #242078, <harald@redhat.com>)
  - netconsole: fix status(), assorted other cleanups
  - translation updates: fr, ro, sk


author: Bill Nottingham <notting@redhat.com> - 8.57-1
changelog:
  - work around upstream bash changes (#220087, modified from <nvigier@mandriva.com>)
  - init.d/network: add Should-Start for firewall services
  - ifup-eth: handle arp_ip_target separately (#288151, <agospoda@redhat.com>)
  - rc.sysinit: remove rc.serial support - should be udev rules
  - rc.sysinit: remove acpi module loading - now supported by the kernel automatically
  - fix en_GB translation (#271201)
  - translation updates: as, bn_IN, bg, ca, cs, de, el, es, fi, gu, hi, it, ja, ko, kn, ml,
    mr, nb, nl, pa, pl, pt, pt_BR, ro, sl, sr, sr@Latn, sv, ta, te, zh_CN


author: Bill Nottingham <notting@redhat.com> - 8.58-1
changelog:
  - revert kernel conflict so that xen can still work (#319401)
  - rename_device, 60-net.rules: only suggest an interface name (part of #264901)
  - require newer udev for persistent net rules (part of #264901)
  - don't hang if someone puts a dangling pipe in /etc/rhgb/temp (#251219)
  - genhostid: fix for 64-bit systems (#306811)
  - more bash matching fixes (#220087)
  - translation updates: is, nb


author: Bill Nottingham <notting@redhat.com> - 8.59-1
changelog:
  - rc.sysinit: fix rhgb check
  - prefdm: add wdm section (#248087)
  - init.d/functions, halt: clean up some extraneous delays (#219816)
  - ifup-wireless: set mode before bringing link up (#254046, <linville@redhat.com>)
  - translation updates: pt_BR, hr


author: Bill Nottingham <notting@redhat.com> - 8.61-1
changelog:
  - use lvm, not lvm.static (#429222)
  - ifup-eth: don't do something odd if we find a mac address that
    matches the user-set MACADDR (#251415)
  - rc.sysinit: fix root fs check to catch 'rw,ordered,noatime,etc.' properly
    (#334171)
  - rc.sysinit: Use proper invocations for authconfig, system-config-network
    (#426372, #428202)
  - service: handle unreadable scripts (#427767)
  - initscripts.spec: add requirements for stateless
  - fix perms on /etc/profile.d (#407531, <ville.skytta@iki.fi>)
  - rename_device: handle quoted HWADDR, etc. in ifcfg scripts (#351291)
  - minor stateless fixes
  - Makefile cleanups (from OLPC, <cscott@cscott.net>)
  - translation updates: fr, ru, nb
  - don't endelessly loop on ifdown (#390271)
  - rc.sysinit: - fix encrypted swap partitions with random key
    (<harald@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 8.63-1
changelog:
  - don't start RAID arrays in rc.sysinit, that's done by udev (corollary of #429604)
  - add a NetworkManager-dispatcher script that does netreport on interface changes
  - use udev rules to set the clock, avoiding issues with modular rtcs (#290731)


author: Bill Nottingham <notting@redhat.com> - 8.64-1
changelog:
  - Add a console_init udev helper to do console initialization
  - add /sbin/pidof requirement (#434863)


author: Bill Nottingham <notting@redhat.com> - 8.65-1
changelog:
  - Add a serial console udev/upstart handler (#434764, indirectly)
  - Add some upstart notification for sysv scripts (modified from <cjdahlin@ncsu.edu>, #431231)
  - Handle _rnetdev correctly (#435358, <pjones@redhat.com>)
  - various minor speedups (<arjan@infradead.org>)
  - translation updates: el, fr
  - disable network by default, in favor of NetworkManager


author: Bill Nottingham <notting@redhat.com> - 8.68-1
changelog:
  - netfs: umount 'ncp' filesystems as well (#437117)
  - improve performance of s390 ccw rules (#437110, <mernst@de.ibm.com>)
  - fix consoletype environment leak (#439546)
  - ifdown-eth: make sure NEWCONFIG exists before grepping for it (#390271, continued)
  - console_check: always open with NONBLOCK, clear the serial structs first,
    handle non-16550 ports (<dwmw2@infradead.org>)
  - halt: don't use /etc/sysconfig/clock (#438337)
  - ifup: don't attempt to re-enslave already-enslaved devices (#440077)
  - netfs: run as a NetworkManagerDispatcher script (#439242)
  - netfs: remove $local_fs from the list of provides (making it implicitly provided
    by booting)
  - serial: add a crude hack to wait for runlevels to finish (#437379)
  - serial: frob /etc/securetty when necessary (#437381)
  - add a upstart-specific inittab
  - translation updates: as, bn_IN, cs, de, es, fi, fr, gu, hi, it, ja, kn, ml, mr, nb,
    nl, pa, pl, pt_BR, ru, sk, sr, ta, te, zh_CN


author: Bill Nottingham <notting@redhat.com> - 8.69-1
changelog:
  - Bring up lo whenever it shows up, not just in network/NM
  - fix shutdown-related oddities (#438444)
  - translation updates: el, sr, sr@latin, sv


author: Bill Nottingham <notting@redhat.com> - 8.70-1
changelog:
  - find is now in /bin. Use it. (#192991, #239914, #244941, #442178)
  - require event-compat-sysv for now (#442291)
  - fix serial event to wait properly
  - handle encrypted LVs properly (#441728)
  - add a sit tunnel type (#441635)
  - translation updates: ru


author: Bill Nottingham <notting@redhat.com> - 8.71-1
changelog:
  - adjust to gdm using LANG instead of GDM_LANG (#372151, <rstrode@redhat.com>)
  - rework netfs' check for networking availability to properly handle both network
    and NetworkManager


author: Bill Nottingham <notting@redhat.com> - 8.73-1
changelog:
  - move event-compat-sysv events here, obsolete it
  - fix ctrl-alt-del during rc.sysinit (#444050)
  - fix 'telinit X' from single-user mode (#444001)


author: Bill Nottingham <notting@redhat.com> - 8.74-1
changelog:
  - use full path to /sbin/ip in NetworkManagerDispatcher script (#444378)
  - lang.{sh,csh}: read only user customization if LANG is already set (#372151)


author: Bill Nottingham <notting@redhat.com> - 8.77-1
changelog:
  - NMDispatcher/05-netfs: fix check for default route (#445509)
  - service: don't set $LANG, rely on it to inherit from system locales (#422141)
  - init.d/functions: fix resolve_dm_raid() for older dmraid configs
  - Don't unmount sysfs in halt. (#446292)
  - rc.sysinit: don't try to startup crypto if we can't find the device
  - rc.sysinit: don't echo crypto stuff unless we're actually *doing* something
  - ifup: don't try to rename devices - udev rules are the way to go
  - rc.sysinit: fix typo, and don't restorecon on swap, etc. partitions (#448886)
  - set MALLOC_CHECK_ & MALLOC_PERTURB_ if configured (<pjones@redhat.com>)
  - console_init: support SYSFONTACM correctly, and support UNIMAP (#448704,
    <vvv+fedora@colocall.net>)
  - don't export GRAPHICAL - plymouth is for all modes. also, don't start rhgb
  - fix clock rules to properly handle old-style RTC devices (#447019)
  - translation updates: ko, or, pl


author: Bill Nottingham <notting@redhat.com> - 8.79-1
changelog:
  - fix mcheck stuff to be installed correctly
  - don't do an arping check for loopback interfaces
  - console_init: don't wait (<arjan@infradead.org>)
  - rc: clean up extraneous set -x noise
  - remove references to static dmraid/multipath binaries (#453987)
  - translation updates: lv


author: Bill Nottingham <notting@redhat.com> - 8.80-1
changelog:
  - Fix translation typo (#455804, <ruslanpisarev@gmail.com>)
  - Turn off syncookies
  - Cleanups for proper plymouth support
  - Move the mcheck code to a debugmode package, make it more generic


author: Bill Nottingham <notting@redhat.com> - 8.81-1
changelog:
  - rc.sysinit: Don't use -L in find (#458652, #458504, CVE-2008-3524)
  - ifup: kill more code from loopback bringup


author: Bill Nottingham <notting@redhat.com> - 8.82-1
changelog:
  - refresh translation strings
  - plymouth updates. (#460702, <rstrode@redhat.com>)
  - translation updates: fi, lv, no
  - remove duplicate dependency (#465182)
  - ifup-eth: Change how we set the zeroconf route. (#239609)
  - ifup*: Use 0.0.0.0/0, not 0/0. (#460580)


author: Bill Nottingham <notting@redhat.com> - 8.83-1
changelog:
  - various merge review fixes (#225900)
    Notably: init scripts/network scripts are no longer %config
  - remove some extraneous device-mapper initialization
  - use pidfile in status before calling pidof (#463205)
  - use plymouth directly, not the rhgb-client wrapper
  - move bridging after bonding (#449950, <djuran@redhat.com>)
  - use alsactl to save sound settings. (#462677, <jkysela@redhat.com>)
  - quit plymouth differently (<rstrode@redhat.com>)
  - make sure we don't try and spawn a repair shell when there's no
    tty (#463161)
  - move udev rules to /lib
  - stateless updates (#433702, <harald@redhat.com>)
  - call logger with a full path (#447928, <harald@redhat.com>)
  - translation updates: as, bn_IN, ca, cz, de, es, fi, fr, gu, it, ja,
    lv, mr, nl, or, pa, pl, pt_BR, ru, te, zh_TW


author: Bill Nottingham <notting@redhat.com> - 8.84-1
changelog:
  - override Arabic, Persian, and Hebrew on the console (<alsadi@ojuba.org>)
  - explicitly run mdadm on boot to catch degraded arrays. (<dledford@redhat.com>)
  - fix setting of console font/map (#458362, <ak@sensi.org>)
  - translations updates: hi, kn, nb, sk, sv, ta


author: Bill Nottingham <notting@redhat.com> - 8.85-1
changelog:
  - add some error handling/hiding to netfs NM dispatcher script (#469197)
  - halt: fix code that causes a syntax error on multiple sound cards (#469156)
  - require a new enough udev version to handle where we put the rules
  - exit 0 in /etc/rc.d/rc (#469050)
  - don't set up encrypted devices that have already been set up under different
    names (#462371, <wwoods@redhat.com>)
  - accept either the '+<addr>', or comma-separated addresses for arp_ip_target. (#467954,
    <darcy.sherwood@gmail.com>)
  - translation updates: hu, kn, ko, ml, sr, sr@latin


author: Bill Nottingham <notting@redhat.com> - 8.86-1
changelog:
  - stop plymouth before stopping the runlevel (#467207)
  - fix get_config_by_subchannel (#459044, <harald@redhat.com>)
  - use blkid -l to pick a single most appropriate device (#470027)
  - don't mkswap on halt, as it breaks swap-by-label/UUID (#469823)


author: Bill Nottingham <notting@redhat.com> - 8.87-1
changelog:
  - rename_device: be much faster in the presence of many devices (#480687, <danms@us.ibm.com>)
  - fix switching from targeted to MLS policy (#479054, <dwalsh@redhat.com>)
  - rc.sysinit: don't set $(uname -r) or $(uname -m); they're not used
  - network-functions-ipv6: set MTU correctly for 6to4. (#477976, <ackistler@yahoo.com>)
  - add more entries to rwtab (#476799, <harald@redhat.com>)
  - net.hotplug: Bail out sooner if the network service isn't running
  - init.d/halt: determine reboot/halt via existing INIT_HALT environment variable. (#475227)
  - event.d/serial: add some docs
  - init.d/functions: __pids_var_run: Handle multi-line pid files correctly (#473287)
  - remove support for no longer existing 'brctl setgcint' command. (#360471)
  - add %config back for ifcfg-lo (#472761)
  - rcS/rcS-sulogin: don't match commented lines when finding runlevel (#472717)
  - updated translations: de, sk


author: Bill Nottingham <notting@redhat.com> - 8.89-1
changelog:
  - use a leading path when sourcing files (#482826)
  - netfs: don't unmount nfsd filesystem by accident (#481794, <sprabhu@redhat.com>)
  - bring up ipsec interfaces last (#481733)
  - ifdown-eth: fix bridge + vlan (#481557, <danken@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 8.90-1
changelog:
  - init.d/functions: cgroup support (<jsafrane@redhat.com>)
  - fix various issues with dmraid handling (#485895, <hdegoede@redhat.com>)
  - rc.sysinit: fix typo. (#487926)
  - console_init: loadkeys has a -q option for silent running. Use it.
  - ifup-tunnel: add compatibility for openNHRP tunnels (#486559, <claude.tompers@ieee.lu>)
  - ccw_init: don't re-init an existing device, it causes errors. (#484411, <jpayne@redhat.com>)
  - netfs: use same kpartx arguments as rc.sysinit
  - don't list mtab in rwtab (#457941)
  - translation updates: fi, de, mai


author: Bill Nottingham <notting@redhat.com> - 8.91-1
changelog:
  - fix DHCP reading of options from ifcfg-XXX (#483257)
  - ifdown-eth: clean up bridges on ifdown (#463325, <sean@bruenor.org>)
  - support MD on iSCSI (#480627)
  - remove support for 'ifcfg-foo-bar' configurations that inherit from 'ifcfg-foo'
  - remove slip support
  - translation updates: es, pl, ca, sr, de, sv, pa, pt_BR


author: Bill Nottingham <notting@redhat.com> - 8.93-1
changelog:
  - rc.sysinit: add a disk synchronization point with scsi_wait_scan post-udev (#481470)
  - netfs: drop smbfs support, we don't even ship the module or tools any more
  - setsysfont: honor LC_CTYPE (#487133, <skasal@redhat.com>)
  - prefdm: do fallbacks based on provides of 'service(graphical-login)' (#485751)
  - rc.sysinit: handle multiple IP addresses without choking in the stateless code (#443945)
  - rc.sysinit: catch the right error code from checking for passphrases (#483269, <vladis.kletnieks@vt.edu>)
  - prefdm: handle empty /etc/sysconfig/desktop correctly (#480113)
  - ifup-ipsec: allow use of either ESP only or AH only (#251494, <stijn.tintel@x-tend.be>)
  - ifup-eth: allow passing of arguments to dhcp6c (#437949, <pekkas@netcore.fi>)
  - ifup-eth: fix dhcpv6 when there is no IPv4 configuration (#486507)
  - ifup-ppp: avoid spurious SIGCHLD to pppd (#448881)
  - ifup-eth: add support for creating TUN/TAP devices on the fly (#453973, <scott@zahna.com>)
  - stop plymouth when starting single-user mode. (#491062)
  - add plymouth shutdown script (#473237, <jmccann@redhat.com>)
  - fix lang.sh/lang.sh/consoletype for execution with '-e'
  - ifdown-eth: remove arp_ip_target on ifdown for bonding devices. (#483711)
  - add vlan support for s390 HSI interfaces. (#490584)
  - ipcalc: support IPv6 (#464268, <dcantrell@redhat.com>)
  - translation updates: all


author: Bill Nottingham <notting@redhat.com> - 8.94-1
changelog:
  - prefdm: add simple fallbacks, sort rpmdb query for consistency (#494461)
  - translation updates; bn, de, pt, ru, te


author: Bill Nottingham <notting@redhat.com> - 8.95-1
changelog:
  - don't kill runlevel events on subsequent entering of the same runlevel (#498514)
  - lang.*sh: handle spaces in $HOME (#498482)
  - network-functions: explicitly source from the proper directory. (#496233)
  - remove persistent names on sys-unconfig. (#448322)
  - init.d/functions: cgexec has moved to /bin (#495715)
  - allow changing of VLAN type even if the module is already loaded. (#495053, <pietro@bertera.it>)
  - translation updates: fr, ml, pt


author: Bill Nottingham <notting@redhat.com> - 8.96-1
changelog:
  - fix up upstart rules for s390(x). (#515222)
  - leave ChangeLog in the tarball only. (#515012)
  - disable netfilter on bridged interfaces. (#512206)
  - assorted shell-related cleanups to ipv6 and other code (<victor.lowther@gmail.com>)
  - use resolv.conf from dracut netboot before setting hostname. (#514801, <wtogami@redhat.com>)
  - ipcalc updates (<victor.lowther@gmail.com>)
  - only use ethtool for link checking; no more mii-tool
  - require /sbin/blkid directly, as it moves between packages (#508413)
  - redirect bash errors on 'unset' to /dev/null. (#482888)
  - fix dmraid partition naming (#501476, <hdegoede@redhat.com>)
  - don't quote upstart signals. (#501155)
  - translation updates: bn_IN, da, es, sk


author: Bill Nottingham <notting@redhat.com> - 8.97-1
changelog:
  - ipcalc: fix IPv6 address checking (#516319)
  - ifup-aliases: fix syntax error from earlier cleanups. (#515612, <jik@kamens.brookline.ma.us>)
  - translation updates: nb
  - rc.sysinit: remove useless call to pam_console_apply


author: Bill Nottingham <notting@redhat.com> - 8.98-1
changelog:
  - sysconfig.txt: doucment DHCP_HOSTNAME (#498052)
  - 88-clock.rules: Use --systz instead of --hctosys. (#517886, #489494)
  - Support rwtab and state passed from dracut initrd (#515771, <wtogami@redhat.com>)
  - restore context of *tmp files (#519748)
  - halt: don't try and save mixer settings if it's not writable. (#515771)
  - rwtab: add /var/spool, /var/lib/dbus, others (#494973, #515771)
  - sysconfig.txt: clarify docs (#518614)
  - rc.sysinit: don't pretend /selinux is configurable (#518164)
  - assorted ipv6 redundant code deletion
  - translation updates: bn, ca, de, es, fi, fr, gu, hi, it, ja, ko, ml, nb, nl, pl, pt, pt_BR, ru, sr, ta, zh_CN, zh_TW


author: Bill Nottingham <notting@redhat.com> - 8.99-1
changelog:
  - init.d/functions: add a '-l' option to status to pass lock file name (#521772)
  - tweak kernel conflict
  - translation updates: as, bn_IN, de, fr, hi, it, hu, kn, mr, or, pa, pt, ru, te


author: Bill Nottingham <notting@redhat.com> - 9.00-1
changelog:
  - halt: wrap /sbin/killall5 to catch some return codes (#526539)
  - netfs, netconsle, network: fix return codes to match LSB spec (#524489, #524480, #524486)
  - handle kernels compiled both with and without CONFIG_RTC_HCTOSYS
  - halt: use killall5's return code to avoid unncesssary sleeping (#524359, <hdegoede@redhat.com>)
  - halt: don't kill mdmon on shutdown. (#524357, <hdegoede@redhat.com>)
  - rc.sysinit: do not try and activate ISW raidsets, unless noiswmd is passed. (#524355, <hdegoede@redhat.com>)
  - translation updates: ca, cs, da, mai, po, sv, uk


author: Bill Nottingham <notting@redhat.com> - 9.01-1
changelog:
  - rc.sysinit: fix handling of dmraid output to avoid error messages (#527726, <mschmidt@redhat.com>)
  - rwtab: add /var/lib/xend (#526046)
  - translation updates: fi, nb, pl


author: Bill Nottingham <notting@redhat.com> - 9.02-1
changelog:
  - remove long-since deprecated initlog
  - remove IUCV support (#507217)
  - halt: put a wrapper around killall5 to account for retval 2 not being an error (#526539, <hdegoede@redhat.com>)
  - ifup-eth: honor DEFROUTE=yes|no for 'all' connection types. (#528822)
  - network-functions: load bonding driver if BONDING_OPTS is defined. (#516569)
  - rc.sysinit: put /dev/shm in mtab too, as dracut now mounts it. (#528667)


author: Bill Nottingham <notting@redhat.com> - 9.03-1
changelog:
  - migrate to upstart 0.6.x (<notting@redhat.com>, <plautrba@redhat.com>)
  -- jobs move to /etc/init
  -- collapse rcX and ttyX jobs into single job definitions
  -- jobs are no longer %config
  - remove obsolete doexec command
  - rc.sysinit: handle yet another random return string from dmraid
  - remove never-used 'sulogin' upstart event
  - fix time-setting udev rules for old-style RTC devices (#537595)
  - init.d/network: keep error codes limited to '1'. (#537841)
  - add initial ifup/ifdown man pages. (#529328, <plautrba@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 9.04-1
changelog:
  - various shell-related cleanups and optimizations <ville.skytta@iki.fi>
  - ifup-eth: use dhclient's -H option instead of munging dhclient config files
  - rc.sysinit: move mdadm after dmraid (#494821)
  - ifup-eth: use dhclient -6, not the no-longer-included dhcp6c
  - add more man pages (#529328, <plautrba@redhat.com>)
  - move is_wireless after MACADDR/MTU setting (#552638)
  - serial.conf: respawn correctly. (#552324, <zing@fastmail.fm>)
  - network-functions: use sysfs for wireless check (#551019, <adel.gadllah@gmail.com>)
  - reload init on started messagebus (<plautrba@redhat.com>)
  - honor HOTPLUG in ifdown (#547737)
  - network-functions: silence error. (#516569)


author: Bill Nottingham <notting@redhat.com> - 9.05-1
changelog:
  - network-functions: don't use ethtool for link state, assorted other cleanups
  - inittab: fix job paths in comments (<plautrba@redhat.com>)
  - init.d/functions: don't clear environment in runuser (#203010, #564093)
  - 88-clock.rules: use ATTR, not SYSFS (#560756)
  - init.d/network: don't quote regex argument to bash's =~ (<ville.skytta@iki.fi>)
  - network-functions: use HWADDR to determine DEVICE if DEVICE isn't set (#545597)
  - don't HUP init when messagebus starts (#557791)
  - setsysfont: use UNIMAP, not SYSFONTACM, when calling unicode_start (#557089)
  - ifup: don't leave the link down on link failure for DHCP (#462013, #491009)
  - translation updates: cs


author: Bill Nottingham <notting@redhat.com> - 9.06-1
changelog:
  - move ccw_init and ccw udev rules to s390utils (#539491)
  - rc.sysinit: suppress LVM2 warnings.  (#561938, <prajnoha@redhat.com>)
  - fix translated checks for user input (#566579)
  - refresh translations


author: Bill Nottingham <notting@redhat.com> - 9.07-1
changelog:
  - clean out some extraneous package requirements
  - fix dmraid error checking now that dmraid has return codes (#568790, others)
  - integrate with NetworkManager for ifup/ifdown (#523064)
  - translation updates: cs, da, de, en_GB, es, fi, nl, pl, pt_BR, ru, sr


author: Bill Nottingham <notting@redhat.com> - 9.08-1
changelog:
  - network-functions: redirect error messages when nmcli isn't installed (#570828, <zing@fastmail.fm>)
  - ifdown: use nmcli to get the device, if not specified
  - ifdown: fix typo
  - translation updates: fr


author: Bill Nottingham <notting@redhat.com> - 9.09-1
changelog:
  - rc.sysinit: change RAID handling (<dledford@redhat.com>)
  - fix german mistranslation (#575954, <pb@bierenger.de>)
  - init.d/functions: correct fix for environment with runuser. (#203010, #564093)
  - halt: fix mdmom pid handling for newer mdadm (#549726, <dledford@redhat.com>)
  - init.d/network: only blacklist the original loopback interface. (#579816, <evgsyr@gmail.com>
  - translation updates: de, ja, nb, pt, sv, uk


author: Bill Nottingham <notting@redhat.com> - 9.10-1
changelog:
  - fstab-decode.8: fix formatting (#586476)
  - prefdm: add --retain-splash for KDM as well (#585250)
  - init.d/functions: handle being unable to read a specified pid file. (#584575)
  - init/quit-plymouth.conf: use 'task' for stopping plymouth. (<rstrode@redhat.com>)
  - ifup-eth: run dhclient -6 similar to dhclient -4. (#585047)
  - net.hotplug: don't run on odd interfaces. (#584530)


author: Bill Nottingham <notting@redhat.com> - 9.14-1
changelog:
  - clean up plymouth shtudown splash (#590099, <rstrode@redhat.com>)
  - rc.sysinit: use lvm2 --sysinit option (#588777)
  - network-functions: behave sanely in the absence of $DEVICE (#589521)
  - sysconfig/debug: export debug variables (#589378)
  - netfs: check for NM to be connected, not just running (#589710)
  - rcS*.conf: check if /etc/inittab exists (#590703, <plautrba@redhat.com>)
  - port vlan code to /sbin/ip (#566485, <plautrba@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 9.15-1
changelog:
  - ifup-eth: check for dhclient configuration in /etc/dhcp as well (#607764, #607766)
  - network-functions: handle quoted SUBCHANNELS (#607481)
  - netfs: allow for encrypted network block devices (#605600)
  - ifdown-ipsec: don't use a full path when killing racoon, so it works in MLS policy (#567295)
  - network-functions: check NM_CONTROLLED before deciding to use NM for a connection. (#599707, probably others.)
  - rc.sysinit: always reboot on autorelabel. (#595823)
  - init.d/functions: handle permission denied on reading PID file. (#595597)
  - clean up some deprecated items
  - translation updates: el, nl, or, zh_CN


author: Bill Nottingham <notting@redhat.com> - 9.16-1
changelog:
  - halt: don't umount cgroups (#612789)
  - rename_device: dequote DEVICE key, handle SUBCHANNELS (<harald@redhat.com>)
  - sysconfig.txt: document PREFIX/NETMASK (#617481, <jklimes@redhat.com>)
  - sysconfig.txt: document NETWORKWAIT (#595386)
  - remove support for hotkey interactive startup (#605016). Use 'confirm' on the commandline
    (but even that doesn't fully make sense in an upstart/systemd world)
  - don't directly execute bash for single-user mode (#540216, #584443, #585053)


author: Bill Nottingham <notting@redhat.com> - 9.17-1
changelog:
  - init.d/functions: redirect start/stop/condrestart/etc to systemctl in a systemd environment (#612728)
  - rc.sysinit: don't frob the console loglevel on boot (#621257, #626572)
  - service: use systemctl on systemd services
  - 10-console.rules: only init consoles on add, not change (<lennart@poettering.net>)
  - halt: fix unmounting bind mounts (#620461, <phr@doc.ic.ac.uk>)
  - killall: exit 0 (#605519)
  - translation updates: de, es, fi, fr, nl, pl, sv, uk


author: Bill Nottingham <notting@redhat.com> - 9.18-1
changelog:
  - fix for new cgroups location (#612789, others <plautrba@redhat.com>)
  - add in basic systemd units
  - translation updates: nb, pt, sv


author: Bill Nottingham <notting@redhat.com> - 9.19-1
changelog:
  - fix packaging of prefdm, rc-local systemd units (#630952)
  - systemd/single.service: conflict with shutdown.target (#630935)
  - translation updates: ja, pt_BR, ru


author: Bill Nottingham <notting@redhat.com> - 9.20-1
changelog:
  - use new pidof -m option to avoid false positives (#632321)
  - systemd/single: set $HOME for single-user mode. (#631590)
  - systemd/killal.service: require shutdown.target (#630935, #632198)


author: Bill Nottingham <notting@redhat.com> - 9.21-1
changelog:
  - build for systemd only
  - ship a default.target link in case the one in /etc gets deleted
  - rc.sysinit: reset btmp on boot if necessary (#633768, <dmach@redhat.com>)
  - single.service: fix invocation so that 'runlevel' works (#630914)


author: Bill Nottingham <notting@redhat.com> - 9.22-1
changelog:
  - merge in systemd-specific startup support; package a -legacy package
    (based on work by <harald@redhat.com>)
  - init-ipv6.global: don't load sit module on shutdown. (#654098, <ejsheldrake@gmail.com>)
  - do not call rhgb-client
  - network-functions: add infiniband mapping (#648524, <monis@voltaire.com>)
  - fix ifdown nmcli invocation (#612934, jklimes@redhat.com>)
  - *ipv6*: don't use obsolete /sbin/ip wrapper
  - sysconfig.txt: adjust clock docs (#637058)
  - lang.csh: fix tcsh + grep-2.7. (#636552)


author: Bill Nottingham <notting@redhat.com> - 9.23-1
changelog:
  - don't throw errors on unreadable /dev/stderr (#650103, <plautrba@redhat.com>)
  - support multiple ipv4 addresses, not just alias devices (#132912, #633984, <jklimes@redhat.com>)
  - properly handle /var/run on tmpfs (#656602, <plautrba@redhat.com>)
  - allow '0' as a vlan tag (#624704, #635360)
  - assorted systemd unit cleanup (<lennart@poettering.net>)


author: Bill Nottingham <notting@redhat.com> - 9.24-1
changelog:
  - ifup-eth/ifdown-eth: handle 'MASTER' being quoted. (#651450, <gfidente@redhat.com>)
  - tmpfiles.d: remove entries that exist in systemd
  - frob device when calling sysctl, in case of vlans. (#665601, #667211, <ossman@cendio.se>)
  - netfs: rework to handle bind-mounted cifs/ncpfs (#663140, <dmudrich@nospam.mudrichsystems.com>)
  - own /etc/crypttab (#664309)
  - init.d/network: add # as a valid character in network device names (<Matt_Domsch@dell.com>)
  - ifup-eth: fix routing regression (#660363)
  - sysctl.conf.s390 - system z optimized sysctl settings per default (#633323, <plautrba@redhat.com>)
  - serial.conf, tty.conf: stop tty and serial also on runlevel 's' (#629257, <plautrba@redhat.com>)
  - translation updates: bn_IN, es, gu, hi, nds, or, pa, uk, zh_CN


author: Bill Nottingham <notting@redhat.com> - 9.25-1
changelog:
  - remove 'Red Hat Linux' references from sysctl.conf* (<ville.skytta@iki.fi>)
  - rc.sysinit: add support for sysctl.d (#593211, <martin@laptop.org>)
  - console_check: support OMAP serial console (#678875, <ndevos@redhat.com>)
  - /sbin/service: accept --ignore-dependencies, --skip-redirect as options
  - /sbin/service: honor SYSTEMCTL_IGNORE_DEPENDENCIES (<lennart@poettering.net>)
  - translation updates: kn, pa, ta, uk


author: Bill Nottingham <notting@redhat.com> - 9.26-1
changelog:
  - network-functions: fix check for unmanaged devices (#670154)
  - ifup-eth: also check /dev/.run/initramfs (<harald@redhat.com>)
  - systemd: execute fedora-sysinit-unhack after sysinit.target (<arvidjaar@gmail.com>)
  - init.d/functions: don't do force/lazy umount for the first nfs umount. (#676851, <jlayton@redhat.com>)
  - further sysctl.d fixes (#593211)
  - init.d/functions: make killproc more granular when delay is passed. (#428029, <xjakub@fi.muni.cz>)
  - ifup: add GVRP support (#597598, <tomek@jot23.org>)
  - init.d/functions: add support for noauto crypt devices, to mirror systemd
  - documentation updates
  - bash cleanups (<ville.skytta@iki.fi>)
  - ifup: remove network device naming requirement from VLAN devices (#462095, <Matt_Domsch@dell.com>)


author: Bill Nottingham <notting@redhat.com> - 9.27-1
changelog:
  - init.d/functions: fix mishandled argument to fstab-decode. (#685137)
  - support ipv6 routing rules, merge route/rule code (#680872, <tobiasoed@hotmail.com>)
  - autorelabel.service, loadmodules.service: fix conditions so that they operate as OR, not AND. (#684125)


author: Bill Nottingham <notting@redhat.com> - 9.28-1
changelog:
  - add some generic network logging, port scripts to it (#507515, #653630)
  - add an error when setting the gateway fails (#672202)


author: Bill Nottingham <notting@redhat.com> - 9.29-1
changelog:
  - systemd: add a storage setup service after cryptsetup.target (#692198)
  - fix /.autorelabel handling (<mschimdt@redhat.com>)
  - don't explicitly disallow IPv6 aliases (#583409, #612877)
  - netfs: don't print errors if mdadm isn't installed. (#692187)
  - ifup-eth: use /run/initramfs rather then /dev/.run/initramfs (<harald@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 9.30-1
changelog:
  - ifup-eth: handle IPADDRx correctly for static addresses (#697838)
  - systemd: fix storage setup service after cryptsetup.target (#699918)
  - prefdm: tweak how plymouth is quit in the gdm/kdm case (<rstrode@redhat.com>)
  - support /etc/hostname as an override for hostname in /etc/sysconfig/network
  - init.d/single: only ship this in -legacy
  - network-functions: fix IPADDRx index handling (<jklimes@redhat.com>)
  - ifup/down-eth: properly handle apr_ip_target, when used with module options (#604669, <harald@redhat.com>)
  - ifup-eth: ensure bond exists before bringing up slaves (#694501)


author: Bill Nottingham <notting@redhat.com> - 9.31-1
changelog:
  - remove ifup/ifdown-ipsec; they're now in ipsec-tools
  - rc.sysinit: start udev by hand, start_udev is no more (#714531)
  - ifup-aliases: if IPv6 is configured on the alias, configure it. (#583409)
  - ifup-eth: ensure DHCP_HOSTNAME is a short hostname, seed it from HOSTNAME if needed. (#697877)
  - network-functions: override NETMASK from PREFIX where specified (#705367, <mpoole@redhat.com>)
  - exclude single symlink from main package (#705457)
  - network: VLAN, etc. interfaces can be slaves; check for being a slave first. (#703475)
  - network: use LC_ALL=C when calling sed. (https://bugs.mageia.org/show_bug.cgi?id=1216, via <sander.lepik@eesti.ee>)
  - functions: (umount_loop) fuser -k defaults to -9; set the initial pass to kill -15. (#703457)
  - init.d/halt: don't match filesystem types in hostnames (#703203, <jmueller@data-tronics.com>)


author: Bill Nottingham <notting@redhat.com> - 9.32-1
changelog:
  - prefdm: if exec() of all DMs fails, call 'plymouth quit' (#735215)
  - %ghost rc.local (but leave it around on upgrade) (#734268)
  - ifup: support random bridging options via BRIDGING_OPTS (#734045, #665378)
  - selinuxfs moved to /sys/fs, handle it (#733759)
  - netfs/fedora-storage-init: call multipath and kpartx with -u (#733437)
  - plymouth lives in /bin (#702814)
  - drop fedora-autoswap
  - ifdown-eth: fix dhclient pid file for IPv6 (#729292, <daveg@dgit.ndo.co.uk>)
  - move some more things to the legacy subpackage
  - netfs: don't mount gfs2 here (#689593)
  - readonly-root: add an empty CLIENTSTATE definition (#725476)
  - drop sysinit hack/unhack
  - ifup-eth: allow more options in ETHTOOL_OPTS (#692410, #693583)
  - rwtab: update for systemd (#704783)
  - debug.csh: fix for latest csh
  - update translations: eu_ES, hy, ku, lo, my, wa


author: Bill Nottingham <notting@redhat.com> - 9.33-1
changelog:
  - netconsole: only use the first ARP response (#744309, <doug.knight@karmix.org>)
  - udev/rules.d/88-clock.rules: drop this entirely, as it causes issues in conjunction with systemd
  - init.d/network: be less picky about ifcfg file names. (#742276)
  - /sbin/service: do not check for the existence of a systemd unit before redirecting (<mschmidt@redhat.com>)
  - init.d/functions: only run consoletype if connected to something that's console-ish. (#657869)


author: Bill Nottingham <notting@redhat.com> - 9.34-1
changelog:
  - read locale.conf if it exists (#706756)
  - ifdown: fix logic error with removing arp_ip_target (#745681)


author: Bill Nottingham <notting@redhat.com> - 9.35-1
changelog:
  - use the same DHCP lease file names as NetworkManager, where appropriate
  - copy network state from initramfs with a systemd service, not inline (<wwoods@redhat.com>)
  - sysconfig.txt: clean up section on disabling IPv6
  - ifup: allow for ifup-$TYPE/ifdown-$TYPE
  - fedora-readonly.service: drop StandardInput=tty (#785662)
  - sysconfig.txt: document additional ETHTOOL_OPTS enhancements (<raghusiddarth@gmail.com>)
  - port assorted ancient ifup-XYZ scripts away from ifconfig
  - don't use ifconfig in ifup-aliases (#721010, 588993, based on <tgummels@redhat.com>)
  - fedora-storage-init: handle dmraid sets with spaces (#728795, <lnykryn@redhat.com>)
  - fedora-readonly: don't exit with an error if SEinux isn't active. (#768628)
  - init.d/network: fix checks for network filesystems (#760018)
  - fedora-wait-storage: drop stdin/stdout/stderr (#735867)
  - netfs: move to legacy package
  - translation updates


author: Bill Nottingham <notting@redhat.com> - 9.36-1
changelog:
  - ifup-aliases: fix IFS usage mangling of device names (#802119)
  - ifup/ifdown: fix typo (#802055, <lubek@users.sourceforge.net>)


author: Bill Nottingham <notting@redhat.com> - 9.39-1
changelog:
  - assorted documentation cleanups
  - typo, spelling, licenese clean up (<ville.skytta@iki.fi>)
  - service: add support for legacy custom actions packaged in
    /usr/libexec/initscripts/legacy-actions/<script>/<action>
  - network-functions: handle quoted HWADDR (#835372)
  - allow bridge names that start with '-' (<danken@redhat.com>)
  - remove all non-legacy uses of /sbin/route (#682308)
  - move default sysctl.conf to /usr/lib/sysctl.d (#760254)


author: Bill Nottingham <notting@redhat.com> - 9.41-1
changelog:
  - debugmode: MALLOC_CHECK_ is not thread safe. Don't enable it by default (#853175)
  - Add support for 256 color terminals (<pbrady@redhat.com>)
  - ifdown-eth: be less strict about VLAN name (#505314, <vpavlin@redhat.com>)
  - drop prefdm
  - ifup-eth: allow duplicate address detection to be disabled (<bcodding@uvm.edu>)
  - process rule6-* for sit devices (#840009, <lnykryn@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 9.42-1
changelog:
  - Halloween release!
  - add a default /etc/sysctl.conf that describes how to change values, and where the defaults now live. (#760254)
  - translation updates
  - fedora-autorelabel: don't pass -F to fixfiles (#863662, <dwalsh@redhat.com>)
  - fix calling of firewall-cmd in ifup-post/ifdown-post (<jpopelka@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 9.43-1
changelog:
  - 60-net.rules: explicitly set the interface name (#870859)
  - ifup-eth: set firewall zone before ifup-ipv6 for DHCPv6 (#802415)
  - migrate to /etc/locale.conf, /etc/vconsole.conf (#881923)
  - rename_device: fix bogus locking
  - fix wireless device detection for kernel 3.6 (#875328)
  - drop fedora-storage-init, fedora-wait-storage (<prajinoha@redhat.com>)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.44-1
changelog:
  - limit udev rule for network renaming (#907365, mschmidt@redhat.com)
  - fix path for arpwatch, seems to be in /var/lib on Fedora 18
  - fix the path for lvm cache, there is no file /etc/lvm/.cache ( but there is one /etc/lvm/cache )
  - fix path for dhcpd, is /var/lib/dhcpd since 2005 ( see 31cdb58df77 on the dhcp package git )
  - fix the patch for apache modules in rwtab, that are now in /var/cache/httpd
  - remove no longer used directory ( at least in Fedora ), hald is deprecated,
    /var/tux cannot be found and xend seems to use a subdirectory of /var/lib/xen
  - correct the path for puppet directory in /etc/rwtab, now use /var/lib/puppet by default
  - allow passing -F from /.autorelabel to fixfiles when relabeling system (#904279)
  - correctly detect Open vSwitch device types
  - clear DEVICE and TYPE variables before every iteration (#902463)
  - sets BONDING_OPTS before interface is brougth up
  - check an IP address for existence in ifup-alias (#852005)
  - sync FSF address with GPL 2 text.
  - fix rpmlint's spaces vs tabs warning.
  - fix bogus %changelog dates.
  - build with $RPM_LD_FLAGS.
  - use -sf, not -s. (#901827)
  - add /usr/libexec/initscripts to file list (#894475)
  - rename term256 to 256term (glob sort) (#849429)
  - readd missing shebang. (#885821)
  - migrate even further away from /etc/sysconfig/network for hostname, and /etc/sysconfig/i18n.


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.45-1
changelog:
  - turn on symlink protections in sysctl (#922030)
  - add systemd-random-seed.service to  Before= in fedora-readonly.service (#888615)
  - mention rule6 files in sysconfig.txt
  - skip nmcli for wireless device (#863707)
  - remove config-noreplace from /etc/inittab (#627474)
  - remount-rootfs.service got renamed to systemd-remount-fs.service
  - compile netreport and usernetctl with full RELRO and PIE (#853178)
  - move stuff directly to /usr (#905492)
  - Remove NETWORKING_IPV6 from sysconfig.txt (#918622)
  - fix greps to correctly handle comments and quotation


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.46-1
changelog:
  - add /var/lib/NetworkManager
  - add ipip6 tunneling support (#928232, raorn@raorn.name)
  - bonding: set master up before slaves
  - set net.ipv6.conf.SYSCTLDEVICE.autoconf in ifup-ipv6
  - ifdown: don't call nmcli on interface that is alread down
  - remove some defaults from sysctl.conf (move to systemd)
  - call flush addresses with scope global
  - service: action should not be empty when calling legacy-actions (#947817)
  - ifup-eth: ignore arping errors (#928379)
  - replace tunctl with ip tuntap (#947875)
  - reload sysctl settings for vlans on ifup
  - try dhcpv6 after v4 failed (#846618)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.47-1
changelog:
  - network-functions: to determine state of nscd check socket not lock (#960779)
  - sysconfig.txt advised saslauthd -a instad of -v
  - update translations from transifex
  - drop translation for other initscripts
  - tweak ifup/ifdown usage and man page (#961917)
  - ctrl-alt-delete.target is provided by systemd package
  - remove some defaults from arch specific sysctl.conf
  - readonly-root: remount rpc_pipefs if readonly-root is used
  - service: mention legacy actions and systemctl redirection in man page


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.48-1
changelog:
  - man: add systemd man pages to service.8 "see also" section
  - add possibility to set domainname through /etc/sysconfig/network
  - rename_device: don't wait for lock with lower permissions
  - 256term.csh: remove quotes around variable (#979796)
  - drop useless variables from /etc/sysconfig/init
  - readonly-root: rpcidmapd restart is not needed anymore
  - ifup-eth: print error only if arping is really called (#974603)
  - readonly-root: Add /var/lib/samba to rwtab


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.2-1
changelog:
  - symlink /etc/sysctl.conf -> /etc/sysctl.d/
  - man: only action specified in LSB are redirected to systemd
  - service: filter actions that are not supported by systemctl in service (#947823)
  - install_bonding_driver: drop check for existing device (#991335)
  - consider IPV6INIT undefined as YES
  - don't care about network filesystems


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.3-1
changelog:
  - update functions who call nmcli (#1002958)
  - create /var/log/dmesg for compatibility reasons (#854002)


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.4-1
changelog:
  - ifdown: fix typo in nmcli call (#1006222)
  - ipcalc: support RFC3021 (#997271)
  - enable 'network' service at boot time for interfaces not supported by NetworkManager (#1003936)


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.7-1
changelog:
  - readonly-root: Add /var/log/audit/audit.log to rwtab (#1026815)
  - brandot: fix posssible segfault (#1024922)


author: Václav Pavlín <vpavlin@redhat.com> - 9.49.8-1
changelog:
  - service: suggest using systemctl if unknown action is used (#1029350)
  - rename_device: remove comments and trailing whitespaces (#1027945)
  - readonly-root: restore selinux context after bind mount (#1029342)


author: Václav Pavlín <vpavlin@redhat.com> - 9.49.11-1
changelog:
  - Revert: provide KVM guest count and limit info message (#1014731)
  - add C implementation of reverted patch


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.12-1
changelog:
  - use iw instead of iwconfig and friends (#915343)
  - don't care about rc.local anymore (#1034156)
  - udev-kvm-check: simplify reading of threshold (#1031568)
  - brandbot: read only first line (#1031490)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.13-1
changelog:
  - delete IPX support
  - update ifup/ifdown NetworkManager interaction (#1036701, #1061810)
  - set shmmax and shmall defaults to match rhel6 values (#1056547)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.14-1
changelog:
  - update ifup/ifdown NetworkManager interaction (#1036701, #1061810)
  - service: fix action matching
  - service: add condrestart to allowed commands (#1069222)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.18-1
changelog:
  - is_available_wait: properly propage return value from is_available
  - man: update sys-unconfig.8
  - rename_devices: comments need to have a blank before them
  - add example ifcfg files
  - network-functions: improve bonding_masters grep
  - ifup: if we were unable to determine DEVICE always call nmcli up
  - ifup-tunnel: call ifup-ipv6 in the end
  - ifup: also set multicast_snooping after the bridge is up
  - ifup-eth: some options for bridge can be applied after the bridge is up
  - custom naming for VLAN devices
  - ifup-wireless: add support for wowlan
  - vi.po: fix parentheses
  - network-functions: ETHTOOL_DELAY introduction patch
  - ipcalc: -c allow netmask
  - ipcalc: parse prefix more safely
  - use pie and relro by default
  - sys-unconfig: use poweroff instead of halt
  - ifup-aliases: improve duplicate address detection
  - network-functions: handle BONDING_OPTS better
  - fedora-readonly: fix prefix detection (#1059749)
  - network: tell nm to wake the slaves
  - bridging: add possibility to set prio and ageing
  - network: add support for team devices
  - inittab: fix path and mention set-default
  - fedora-domainname: DefaultDependencies=no


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.25-1
changelog:
  - network: tell NM to reload its configuration during start
  - bonding: warn if the ifup for slave device failed
  - brandbot: move to /usr/libexec/initscripts
  - sysctl.conf: drop SHMALL and SHMMAX, they have sane default values in kernel
  - rename_device: allow non-channel nics for s390x machines
  - network-functions: fix check in install_bonding_driver
  - ifup-aliases: don't return with error when arping fails
  - network-functions: fix change_resolv_conf after grep update
  - clarify daemon() usage message
  - ifup: don't call NM for loopback
  - ifup: add missing quotes


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.26-1
changelog:
  - import-state: don't run restorecon when it does not exist
  - network-functions: reeplace iwconfig with iw
  - fedora-readonly: use --make-slave with --bind mounts


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.31-1
changelog:
  - ipv6: wait for all global IPv6 addresses to leave the "tentative" state
  - source_config: tell NetworkManger to load ifcfg file even for NM_CONTROLLED=no
  - ifup-aliases: inherit ARPCHECK from parent device
  - rhel-dmesg: don't start in containers
  - ifup-eth: fix typo in error message (#1038776)
  - sysctl.conf: steal comments about /usr,/etc,... from fedora's sysctl.conf
  - rwtab: /var/lib/nfs needs to copy the files
  - functions: improve killing loops
  - ipcalc: detect invalid mask
  - ifup: set valid_lft and preferred_lft to forever for static ip
  - service: use systemd mangle for given service
  - ifup-post: check resolve.conf also with DNS2
  - ifdown-post: remove resolv.conf only in specific cases
  - spec: ghost /var/log/dmesg
  - network-functions: is_available_wait should wait even in the case that is_available returns 2
  - autorelabel: turn quota off before relabeling
  - autorelabel: call dracut-initramfs-restore before forced reboot


author: Peter Jones <pjones@redhat.com> - 0.4.7-4.1
changelog:
  - Split kpartx out into its own package so dmraid can use it without
    installing multipathd
  - Fix a segfault in kpartx


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.8-1
changelog:
  - Updated to latest Upstream 0.4.8 code: multipath-tools-080519.tgz
    (git commit id: 42704728855376d2f7da2de1967d7bc71bc54a2f)


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.8-6
changelog:
  - Updated to latest upstream 0.4.8 code: multipath-tools-080804.tgz
    (git commit id: eb87cbd0df8adf61d1c74c025f7326d833350f78)
  - fixed 451817, 456397 (scsi_id_change.patch), 457530 (config_space_fix.patch)
    457589 (static_libaio.patch)


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.8-7
changelog:
  - Since libaio is now in /lib, not /usr/lib, multipath no longer needs to
    statically link against it. Fixed an error with binding file and WWIDs
    that include spaces. Cleaned up the messages from the directio checker
    function.  Fixed the udev rules. Fixed a regression in multipath.conf
    parsing
  - Fixed 457530, 457589


author: Mike Snitzer <snitzer@redhat.com> - 0.4.9-1
changelog:
  - Updated to latest upstream 0.4.9 code: multipath-tools-090429.tgz
    (git commit id: 7395bcda3a218df2eab1617df54628af0dc3456e)
  - split the multipath libs out to a device-mapper-multipath-libs package
  - if appropriate, install multipath libs in /lib64 and /lib64/multipath


author: Benjamin Marzinski <bmarzins@redhat.com> - 0.4.9-3
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-090729.tgz
    (git commit id: d678c139719d5631194b50e49f16ca97162ecd0f)
  - moved multipath bindings file from /var/lib/multipath to /etc/multipath
  - Fixed 354961, 432520


author: Benjamin Marzinski <bmarzins@redhat.com> - 0.4.9-5
changelog:
  - Fixed problem where maps were being added and then removed.
  - Changed the udev rules to fix some issues.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-6
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-091013.tar.gz
    (git commit id: aa0a885e1f19359c41b63151bfcface38ccca176)
  - Drop, now upstream, patches:
    * fix_missed_uevs.patch.
    * log_all_messages.patch.
    * uninstall.patch.
    * select_lib.patch.
    * directio_message_cleanup.patch.
    * stop_warnings.patch.
  - Drop redhatification.patch in favour of spec file hacks.
  - Drop mpath_wait.patch: no longer required.
  - Merge multipath_rules.patch and udev_change.patch.
  - Rename all patches based on source.
  - Add patch 0009-RH-fix-hp-sw-hardware-table-entries.patch to fix
    default entry for hp_sw and match current kernel.
  - Add multipath.conf.redhat as source instead of patch.
  - spec file:
    * divide runtime and build/setup bits.
    * update BuildRoot.
    * update install section to apply all the little hacks here and there,
      in favour of patches against upstream.
    * move ldconfig invokation to libs package where it belong.
    * fix libs package directory ownership and files.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-7
changelog:
  - Add patch 0010-RH-Set-friendly-defaults.patch:
    * set rcdir to fedora default.
    * do not install kpartx udev bits.
    * install redhat init script.
    * Cleanup spec file install target.
  - Add patch 0011-RH-multipathd-blacklist-all-by-default.patch:
    * Fix BZ#528059
    * Stop installing default config in /etc and move it to the doc dir.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-8
changelog:
  - Split patches in "for-upstream" and "RH" series.
  - Replace 0011-RH-multipathd-blacklist-all-by-default.patch with
    version from Benjamin Marzinski.
  - Update udev rules 0010-RH-multipath-rules-udev-changes.patch.
  - rpmlint cleanup:
    * Drop useless-provides kpartx.
    * Cleanup tab vs spaces usage.
    * Summary not capitalized.
    * Missing docs in libs package.
    * Fix init script LSB headers.
  - Drop README* files from doc sections (they are empty).


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.4.9-10
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-091027.tar.gz
    (git commit id: a946bd4e2a529e5fba9c9547d03d3f91806618a3)
  - Drop unrequired for-upstream patches.
  - BuildRequires and Requires new device-mapper version for udev sync support.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-11
changelog:
  - Add 0002-for-upstream-add-tmo-config-options.patch
    * Add fail_io_fail_tmo and dev_loss_tmo multipath.conf options
  - Add 0013-RH-add-weighted_prio-prioritizer.patch
  - Add 0014-RH-add-hp_tur-checker.patch
  - Add 0015-RH-add-multipathd-count-paths-cmd.patch
  - rename multipath.conf.redhat to multipath.conf, and remove the default
    blacklist.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-12
changelog:
  - Refresh 0001-RH-queue-without-daemon.patch
  - Refresh 0002-RH-path-checker.patch
  - Modify 0010-RH-multipath-rules-udev-changes.patch
    * Fix udev rules to use DM_SBIN_PATH when calling kpartx
    * install udev rules to /lib/udev/rules.d instead of /etc/udev/rules.d
  - Modify 0014-RH-add-hp_tur-checker.patch
  - Add 0003-for-upstream-default-configs.patch
  - Add 0016-RHBZ-554561-fix-init-error-msg.patch
  - Add 0017-RHBZ-554592-man-page-note.patch
  - Add 0018-RHBZ-554596-SUN-6540-config.patch
  - Add 0019-RHBZ-554598-fix-multipath-locking.patch
  - Add 0020-RHBZ-554605-fix-manual-failover.patch
  - Add 0021-RHBZ-548874-add-find-multipaths.patch
    * Added find_multipaths multipath.conf option
    * Added /sbin/mpathconf for simple editting of multipath.conf
  - Add 0022-RHBZ-557845-RHEL5-style-partitions.patch
    * Make kpartx deal with logical partitions like it did in RHEL5.
      Don't create a dm-device for the extended partition itself.
      Create the logical partitions on top of the dm-device for the whole disk.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-13
changelog:
  - Replace 0012-RH-explicitly-disable-dm-udev-sync-support-in-kpartx.patch
    with 0012-RH-udev-sync-support.patch
    * Add udev sync support to kpartx and multipath. In kpartx it is disabled
      unless you use the -s option.
  - Refresh 0013-RH-add-weighted_prio-prioritizer.patch
  - Refresh 0021-RHBZ-548874-add-find-multipaths.patch
  - Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch
    * kpartx now creates a 2 sector large device for dos extended
      partitions, just like the kernel does on the regular block devices.
  - Add 0023-RHBZ-557810-emc-invista-config.patch
  - Add 0024-RHBZ-565933-checker-timeout.patch
    * Multipath has a new option checker_timeout. If this is not set, 
      all path checker functions with explicit timeouts use
      /sys/block/sd<x>/device/timeout. If this is set, they use it instead.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-14
changelog:
  - Modify 0021-RHBZ-548874-add-find-multipaths.patch
    * fix bug where mpathconf wouldn't create a multpath.conf file unless one
      already existed.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-16
changelog:
  - Modify 0012-RH-udev-sync-support.patch
  - Modify 0021-RHBZ-548874-add-find-multipaths.patch
  - Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch
  - Add 0025-RHBZ-508827-update-multipathd-manpage.patch through
        0101-RHBZ-631009-disable-udev-disk-rules-on-reload.patch
    * sync with current state of RHEL6. Next release should include a updated
      source tarball with most of these fixes rolled in.
  - Add 0102-RHBZ-690828-systemd-unit-file.patch
    * Add Jóhann B. Guðmundsson's unit file for systemd.
    * Add sub-package sysvinit for SysV init script.
  - Resolves: bz #690828


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-17
changelog:
  - Add 0103-add-disable-sync-option.patch
    * add a -n (nosync) option to multipath. This disables synchronous
      file creation with udev.


author: Benjamin Marzinski <bmarzins@redhat.com> -0.4.9-19
changelog:
  - Modify 0103-add-disable-sync-option.patch
  - Add 0104-RHBZ-737989-systemd-unit-fix.patch
    * systemd will only start multipathd if /etc/multipath.conf exists
  - Add 0105-fix-oom-adj.patch
    * first try setting oom_score_adj


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-21
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-120123.tgz
    (git commit id: 63704387009443bdb37d9deaaafa9ab121d45bfb)
  - Add 0001-RH-fix-async-tur.patch
  - Add 0002-RH-dont_start_with_no_config.patch
  - Add 0003-RH-multipath.rules.patch
  - Add 0004-RH-update-init-script.patch
  - Add 0005-RH-cciss_id.patch
  - Add 0006-RH-Make-build-system-RH-Fedora-friendly.patch
  - Add 0007-RH-multipathd-blacklist-all-by-default.patch
  - Add 0008-RH-add-mpathconf.patch
  - Add 0009-RH-add-find-multipaths.patch
  - Add 0010-RH-check-if-multipath-owns-path.patch
  - Add 0011-RH-add-hp_tur-checker.patch


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-22
changelog:
  - Add 0012-RH-update-on-show-topology.patch
  - Add 0013-RH-manpage-update.patch
  - Add 0014-RH-RHEL5-style-partitions.patch
  - Add 0015-RH-add-followover.patch
  - Add 0016-RH-dont-remove-map-on-enomem.patch
  - Add 0017-RH-fix-shutdown-crash.patch
  - Add 0018-RH-warn-on-bad-dev-loss-tmo.patch
  - Add 0019-RH-deprecate-uid-gid-mode.patch
  - Add 0020-RH-dont-remove-map-twice.patch
  - Add 0021-RH-validate-guid-partitions.patch
  - Add 0022-RH-adjust-messages.patch
  - Add 0023-RH-manpage-update.patch


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-27
changelog:
  - Updated to latest upstream 0.4.9 code : multipath-tools-120613.tgz
    (git commit id: cb0f7127ba90ab5e8e71fc534a0a16cdbe96a88f)
  - Add 0001-RH-remove_callout.patch
    * multipath no longer uses the getuid callout.  It now gets the
      wwid from the udev database or the environment variables
  - Add 0004-RH-fix-cciss-names.patch
    * convert cciss device names from cciss/cXdY to sysfs style cciss!cXdY
  - Split 0009-RH-add-find-multipaths.patch into 0002-RH-add-wwids-file.patch
          and 0010-RH-add-find-multipaths.patch
  - Add 0016-RH-change-configs.patch
    * default fast_io_fail to 5 and don't set the path selector in the
      builtin configs.
  Resolves: bz #831978


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-29
changelog:
  - Updated to latest upstrem 0.4.9 code: multipath-tools-120821.tgz
    (git commit id: 050b24b33d3c60e29f7820d2fb75e84a9edde528)
    * includes 0001-RH-remove_callout.patch, 0002-RH-add-wwids-file.patch,
      0003-RH-add-followover.patch, 0004-RH-fix-cciss-names.patch
  - Add 0013-RH-kpartx-msg.patch
  - Modify 0002-RH-multipath.rules.patch
    * removed socket call from rules file


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-31
changelog:
  - Add 0014-RH-dm_reassign.patch
    * Fix reassign_maps option
  - Add 0015-RH-selector_change.patch
    * devices default to using service-time selector
  - Add 0016-RH-retain_hwhandler.patch
    * add retain_attached_hw_handler option, to let multipath keep an
      already attached scsi device handler
  - Add 0017-RH-netapp_config.patch
  - Add 0018-RH-remove-config-dups.patch
    * Clean up duplicates in the devices and blacklist sections


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-32
changelog:
  - Modified 0018-RH-remove-config-dups.patch
    * Made modified config remove original only if the vendor/product
      exactly match


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-33
changelog:
  - Modify 0016-RH-retain_hwhandler.patch
    * Check the dm-multipath module version, and don't enable
      retain_attached_hw_handler if the kernel doesn't support it
  - Add 0019-RH-detect-prio.patch
    * add detect_prio option, to make multipath check if the device
      supports the ALUA prio, before defaulting to the configured prio
  - Remove 0017-RH-netapp_config.patch
  - Add 0020-RH-netapp-config.patch
    * new netapp config that uses retain_attached_hw_handler and
      detect_prio to autoconfigure ALUA and non-ALUA devices.


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-35
changelog:
  - Add 0022-RHBZ-864368-disable-libdm-failback.patch
    * make kpartx and multiapthd disable libdm failback device creation
  - Add 0023-RHBZ-866291-update-documentation.patch
  - Resolves: bz #864368, #866291


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-38
changelog:
  - Add 0026-RH-fix-mpathpersist-fns.patch
  - Add 0027-RH-default-partition-delimiters.patch
    * Only use the -p delimiter when the device name ends in a number
  - Add 0028-RH-storagetek-config.patch
  - Add 0029-RH-kpartx-retry.patch
    * retry delete on busy loop devices
  - Add 0030-RH-early-blacklist.patch
    * multipath will now blacklist devices by device type and wwid in
      store_pathinfo, so that it doesn't do a bunch of unnecessary work
      on paths that it would only be removing later on.


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-40
changelog:
  - Add 0032-RH-make-path-fd-readonly.patch
    * revert change made when adding persistent reservations, so that path fds
      are again opened O_RDONLY


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-41
changelog:
  - Add 0033-RH-dont-disable-libdm-failback-for-sync-case.patch
    * make kpartx -s and multipath use libdm failback device creation, so
      that they work in environments without udev


author: Benjamin Marzinski <bmarizns@redhat.com> 0.4.9-42
changelog:
  - Add 0034-RHBZ-887737-check-for-null-key.patch
  - Add 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch
    * Compile multipathd with full RELRO and PIE and install to /usr


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-44
changelog:
  - Add 0036-UP-fix-state-handling.patch
    * handle transport-offline and quiesce sysfs state
  - Add 0037-UP-fix-params-size.patch
  - Add 0038-RH-fix-multipath.rules.patch
    * make sure multipath's link priority gets increased
  - Add 0039-RH-handle-other-sector-sizes.patch
    * allow gpt partitions on 4k sector size block devices.
  - Add 0040-RH-fix-output-buffer.patch
    * fix multipath -ll for large configuration.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-45
changelog:
  - Updated to latest upstrem 0.4.9 code: multipath-tools-130222
    (git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136)
  - Refresh 0001-RH-dont_start_with_no_config.patch
  - Modify 0002-RH-multipath.rules.patch
  - Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch
  - Refresh 0004-RH-multipathd-blacklist-all-by-default.patch
  - Refresh 0005-RH-add-mpathconf.patch
  - Refresh 0006-RH-add-find-multipaths.patch
  - Add 0008-RH-revert-partition-changes.patch
  - Rename 0008-RH-RHEL5-style-partitions.patch to
  	 0009-RH-RHEL5-style-partitions.patch
  - Rename 0009-RH-dont-remove-map-on-enomem.patch to
  	 0010-RH-dont-remove-map-on-enomem.patch
  - Rename 0010-RH-deprecate-uid-gid-mode.patch to
  	 0011-RH-deprecate-uid-gid-mode.patch
  - Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch
  - Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to
           0013-RHBZ-883981-cleanup-rpmdiff-issues.patch
  - Rename 0039-RH-handle-other-sector-sizes.patch to
  	 0014-RH-handle-other-sector-sizes.patch
  - Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch
  - Add 0016-RH-dont-print-ghost-messages.patch
  - Add 0017-RH-fix-sigusr1.patch
    * Actually this fixes a number of issues related to signals
  - Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch
    * just the part that isn't upstream
  - Add 0019-RH-fix-sockets.patch
    * makes abstract multipathd a cli sockets use the correct name.
  - Set find_multipaths in the default config


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-46
changelog:
  - Add 0020-RHBZ-907360-static-pthread-init.patch
    * statically initialize the uevent pthread structures


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-47
changelog:
  - Add 0021-RHBZ-919119-respect-kernel-cmdline.patch
    * keep the multipath.rules udev file from running and multipathd from
      starting if nompath is on the kernel command line
  - Add 0022-RH-multipathd-check-wwids.patch
    * Whenever multipath runs configure, it will check the wwids, and
      add any missing ones to the wwids file
  - Add 0023-RH-multipath-wipe-wwid.patch
    * multipath's -w command will remove a wwid from the wwids file
  - Add 0024-RH-multipath-wipe-wwids.patch
    * multipath's -W command will set reset the wwids file to just the current
      devices
  - Add 0025-UPBZ-916668_add_maj_min.patch
  - Resolves: bz #919119


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-48
changelog:
  - Add 0026-fix-checker-time.patch
    * Once multipathd hit it max checker interval, it was reverting to
      to shortest checker interval
  - Add 0027-RH-get-wwid.patch
    * Multipath wasn't correctly setting the multipath wwid when it read devices
      in from the kernel
  - Add 0028-RHBZ-929078-refresh-udev-dev.patch
    * Make multipath try to get the UID of down devices.  Also, on ev_add_path,
      make multipathd reinitialize existing devices that weren't fully
      initialized before.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-49
changelog:
  - Modify 0020-RHBZ-907360-static-pthread-init.patch
    * Don't initialize uevent list twice
  - Add 0029-RH-no-prio-put-msg.patch
  - Add 0030-RHBZ-916528-override-queue-no-daemon.patch
    * Default to "queue_without_daemon no"
    * Add "forcequeueing daemon" and "restorequeueing daemon" cli commands
  - Modify spec file to force queue_without_daemon when restarting
    multipathd on upgrades.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-50
changelog:
  - Add 0031-RHBZ-957188-kpartx-use-dm-name.patch
    * use the basename of the devices that will be created to choose the
      delimiter instead of using the device name from the command line
  - Resolves: bz #957188


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-51
changelog:
  - Add 0032-RHBZ-956464-mpathconf-defaults.patch
    * fix defaults listed in usage
  - Add 0033-RHBZ-829963-e-series-conf.patch
  - Add 0034-RHBZ-851416-mpathconf-display.patch
    * display whether or not multipathd is running in the status
  - Add 0035-RHBZ-891921-list-mpp.patch
    * add a new path format wilcard to list the multipath device associated
      with a path
  - Add 0036-RHBZ-949239-load-multipath-module.patch
    * load the dm-multipath kernel module when multipathd starts
  - Add 0037-RHBZ-768873-fix-rename.patch
    * When deciding on a multipth devices name on reload, don't default to
      the existing name if there is no config file alias and user_friendly_names
      isn't set. Use the wwid.
  - Modify multipath.conf
  - Resolves: bz #768873, #950252


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-52
changelog:
  - Add 0038-RHBZ-799860-netapp-config.patch
  - Add 0039-RH-detect-prio-fix.patch
    * Don't autodetect ALUA prioritizer unless it actually can get a priority
  - Add 0040-RH-bindings-fix.patch
    * Do a better job of trying to get the first free user_friendly_name
  - Add 0041-RH-check-for-erofs.patch
    * Don't create/reload a device read-only unless doing it read/write fails
      with EROFS
  - Remove 0017-RH-fix-sigusr1.patch
    * fix signal handling upstream way instead
  - Add 0042-UP-fix-signal-handling.patch
    * uxlsnr now handles all the signals sent to multipathd. This makes its
      signal handling posix compliant, and harder to mess up.
  - Add 0043-RH-signal-waiter.patch
    * ioctl isn't a pthread cancellation point.  Send a signal to the waiter
      thread to break out of waiting in ioctl for a dm event.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-53
changelog:
  - Add 0044-RHBZ-976688-fix-wipe-wwids.patch
    * Seek back to the start of the file after truncating it
  - Add 0045-RHBZ-977297-man-page-fix.patch
    * update man page to match actual defaults
  - Add 0046-RHBZ-883981-move-udev-rules.patch
    * move udev rules file from /lib to /usr/lib
  - Resolves: bz #883981, #976688, #977297


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-54
changelog:
  - Modify 0015-RH-fix-output-buffer.patch
    * Fix memory leak
  - Add 0047-RHBZ-kpartx-read-only-loop-devs.patch
    * Fix read only loop device handling
  - Add 0048-RH-print-defaults.patch
  - Add 0049-RH-remove-ID_FS_TYPE.patch
    * remove ID_FS_TYPE udev enviroment variable for multipath devices
  - Add 0051-UP-fix-cli-resize.patch
    * check before dereferencing variables
  - Add 0052-RH-fix-bad-derefs.patch
    * setup multipath free the multipath device when it fails, so don't keep
      using it.
  - Add 0053-UP-fix-failback.patch
    * setting failback in the devices section was broken
  - Add 0054-UP-keep-udev-ref.patch
    * multipathd needs to keep the same udev object across reconfigures
  - Add 0055-UP-handle-quiesced-paths.patch
    * quiesced paths should be treated as down
  - Add 0056-UP-alua-prio-fix.patch
    * Don't count the preferred bit for paths that are active/optimized
  - Add 0057-UP-fix-tmo.patch
    * Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo.  Also
      make multipath get changing values directly from sysfs, instead of
      from udev, which caches them.
  - Add 0058-UP-fix-failback.patch
    * make failback print the default value when you show configs.
  - Add 0059-UP-flush-failure-queueing.patch
    * If you can't flush a multipath device, restore the queue_if_no_paths
      value
  - Add 0060-UP-uevent-loop-udev.patch
    * make ueventloop grab it's own udev reference, since it is cancelled
      asychnrously.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-55
changelog:
  - Add 0061-RH-display-find-mpaths.patch
  - Add 0062-RH-dont-free-vecs.patch
    * freeing vecs causes a number of races which can crash multipathd on
      shutdown.
  - Add 0063-RH-fix-warning.patch


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-56
changelog:
  - Add 0064-RHBZ-1010040-fix-ID_FS-attrs.patch
    * make multipath create a timestamp file /run/multipathd/timestamp, and
      add -T<timestamp>:<valid> option to shortcut processing if the
      timestamp hasn't changed
  - Resolves: bz #1010040


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-57
changelog:
  - Add 0065-UPBZ-995538-fail-rdac-on-unavailable.patch
    * make rdac checker always mark paths with asymmetric access state of
      unavailable as down
  - Resolves: bz #995538


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-58
changelog:
  - 0066-UP-dos-4k-partition-fix.patch
    * Make kpartx correctly handle 4K sector size devices with dos partitions.
  - Resolves: bz #1018439


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-59
changelog:
  - Add 0067-RHBZ-1022899-fix-udev-partition-handling.patch
    * Make sure to wipe partition devices on change event if they weren't 
      wiped on the device add event 
  - Add 0068-RHBZ-1034578-label-partition-devices.patch   
    * Make sure that partition devices are labeled like the whole device 
  - Add 0069-UPBZ-1033791-improve-rdac-checker.patch   
    *  Use RTPG data in RDAC checker 
  - Add 0070-RHBZ-1036503-blacklist-td-devs.patch
  - Add 0071-RHBZ-1031546-strip-dev.patch   
    * make multipathd interactive commands able to handle /dev/<devnode> 
      instead of just <devnode>
  - Resolves: bz #1022899, #1031546, #1033791, #1034578, #1036503


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-60
changelog:
  - Add 0072-RHBZ-1039199-check-loop-control.patch
    * Make kpartx use LOOP_CTL_GET_FREE and loop-control to find a free
      loop device. This will autoload the loop module.
  - Resolves: bz #1039199


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-63
changelog:
  - Modify 0072-RHBZ-1039199-check-loop-control.patch
    * only call close on the /dev/loop-control fd the open succeeds
  - Add 0073-RH-update-build-flags.patch
    * fix print call to work with -Werror=format-security compile flag, and
      change compilation flags for non-rpmbuild compiles
  - Add 0074-RHBZ-1056976-dm-mpath-rules.patch
    * Add rules to keep from doing work in udev if there are no
      active paths, or if the event was for a multipath device
      reloading its table due to a path change.
  - Add 0075-RHBZ-1056976-reload-flag.patch
    * multipath code to identify reloads that the new rules can
      ignore
  - Add 0076-RHBZ-1056686-add-hw_str_match.patch
    * add a new default config paramter, "hw_str_match", to make user
      device configs only overwrite builtin device configs if the
      identifier strings match exactly, like the default in RHEL6.
  - Add 0077-RHBZ-1054806-mpathconf-always-reload.patch
    * Make mpathconf always reconfgure multipathd when you run it with
      a reconfigure option and --with-multipathd=y, even if the
      configuration doesn't change.
  - Update Requires and BuildRequires for device-mapper to 1.02.82-2
  - Install new udev rules file /usr/lib/udev/rules.d/11-dm-mpath.rules
  - Related: bz #1039199
  - Resolves: bz #1054806, #1056686, #1056976


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-65
changelog:
  - Add 0078-RHBZ-1054044-fix-mpathconf-manpage.patch
    * Fix typo
  - Add 0079-RHBZ-1070581-add-wwid-option.patch
    * add multipath option "-a". To add a device's wwid to the wwids file
  - Resolves: bz #1054044, #1070581


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-66
changelog:
  - Add 0080-RHBZ-1075796-cmdline-wwid.patch
    * add multipath option "-A" to add wwids specified by the kernel
      command line mapth.wwid options.
  - Resolves: bz #1075796


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-67
changelog:
  - Modify multipath.conf (bz #1069360)
    * remove getuid_callout example
  - Add 0081-RHBZ-1066264-check-prefix-on-rename.patch
    * make multipath check the prefix on kpartx partitions during rename, and
      copy the existing behaviour
  - Add 0082-UPBZ-1109995-no-sync-turs-on-pthread_cancel.patch
    * If async tur checker fails on threads, don't retry with the sync version
  - Add 0083-RHBZ-1080055-orphan-paths-on-reload.patch
    * Fix case where pathlist wasn't getting updated properly
  - Add 0084-RHBZ-1110000-multipath-man.patch
    * fix errors in multipath man page
  - Add 0085-UPBZ-1110006-datacore-config.patch
    * Add support for DataCore Virtual Disk
  - Add 0086-RHBZ-1110007-orphan-path-on-failed-add.patch
    * If multipathd fails to add path correctly, it now fully orphans the path
  - Add 0087-RHBZ-1110013-config-error-checking.patch
    * Improve multipath.conf error checking.
  - Add 0088-RHBZ-1069811-configurable-prio-timeout.patch
    * checker_timeout now adjusts the timeouts of the prioritizers as well.
  - Add 0089-RHBZ-1110016-add-noasync-option.patch
    * Add a new defaults option, "force_sync", that disables the async mode
      of the path checkers. This is for cases where to many parallel checkers
      hog the CPU
  - Add 0090-UPBZ-1080038-reorder-paths-for-round-robin.patch
    * make multipathd order paths for better throughput in round-robin mode
  - Resolves: bz #1069360, #1066264, #1109995, #1080055, #1110000, #1110006
  - Resolves: bz #1110007, #1110013, #1069811, #1110016, #1080038


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-68
changelog:
  - Add 0091-RHBZ-1069584-fix-empty-values-fast-io-fail-and-dev-loss.patch
    * check for null pointers in configuration reading code.
  - Add 0092-UPBZ-1104605-reload-on-rename.patch
    * Reload table on rename if necessary
  - Add 0093-UPBZ-1086825-user-friendly-name-remap.patch
    * Keep existing user_friend_name if possible
  - Add 0094-RHBZ-1086825-cleanup-remap.patch
    * Cleanup issues with upstream patch
  - Add 0095-RHBZ-1127944-xtremIO-config.patch
    * Add support for EMC ExtremIO devices
  - Resolves: bz #1069584, #1104605, #1086825, #1086825, #1127944


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-69
changelog:
  - Add 0096-RHBZ-979474-new-wildcards.patch
    * Add N, n, R, and r path wildcards to print World Wide ids
  - Add 0097-RH-fix-coverity-errors.patch
    * Fix a number of unterminated strings and memory leaks on failure
      paths.
  - Resolves: bz #979474


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-70
changelog:
  - Modify 0096-RHBZ-979474-new-wildcards.patch
    * Fix a faulty check
  - Add 0098-UPBZ-1067171-mutipath-i.patch
    * Add -i option to ignore wwids file when checking for valid paths
  - Add 0099-RH-add-all-devs.patch
    * Add new devices config option all_devs. This makes the configuration
      overwrite the specified values in all builtin configs
  - Related: bz #979474
  - Resolves: bz #1067171


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-71
changelog:
  - Re-add 0050-RH-listing-speedup.patch
  - Modify 0098-UPBZ-1067171-mutipath-i.patch
    * add dry_run cleanup code from upstream
  - Refresh 0099-RH-add-all-devs.patch
  - Add 0100-RHBZ-1067171-multipath-i-update.patch
    * make -i work correctly with find_multipaths
  - Resolves: bz #1067171


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-72
changelog:
  - Add 0101-RH-cleanup-partmaps-code.patch
    * code refactoring to prepare for next patch
  - Add 0102-RHBZ-631009-deferred-remove.patch
    * add deferred_remove option to /etc/multipath.conf
  - Resolves: bz #631009


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-75
changelog:
  - Add 0103-RHBZ-1148979-fix-partition-mapping-creation-race-with-kpartx.patch
    * Only run kpartx on device activation
  - Resolves: bz #1148979


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-76
changelog:
  - Modify 0102-RHBZ-631009-deferred-remove.patch
    * Fixed compiler warning message for builds with old device-mapper versions
  - Add 0104-RHBZ-1159337-fix-double-free.patch
    * made ev_remove_path exit immediately after failing setup_multipath, since
      it handles cleaning up the device
  - Resolves: bz #1159337
  - Related: bz #631009


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-77
changelog:
  - Add 0105-RHBZ-1180032-find-multipaths-man.patch
    * add find_multipaths to man page
  - Modify multipath.conf (bz #1069360)
    * add uid_attribute example
  - Resolves: bz #1180032


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-78
changelog:
  - Modify 0102-RHBZ-631009-deferred-remove.patch
    * Code refactor and minor fix.
  - Add 0106-RHBZ-1169935-no-new-devs.patch
    * add new configuration option "ignore_new_boot_devs"
  - Add 0107-RH-adapter-name-wildcard.patch
    * add new paths wildcard to show the host adapter
  - Add 0108-RHBZ-1153832-kpartx-remove-devs.patch
    * switch to kpartx -u in 62-multipath.rules to delete removed partitions
  - Add 0109-RH-read-only-bindings.patch
    * add -B support to multipathd
  - Add 0110-RHBZ-blacklist-vd-devs.patch
    * virtio-blk devices don't report a WWID so multipath can't use them
  - Add 0111-RH-dont-show-pg-timeout.patch
    * remove pg_timeout setting and displaying code
  - Add 0112-RHBZ-1194917-add-config_dir-option.patch
    * add new configuration option "config_dir"
  - Add 0113-RHBZ-1194917-cleanup.patch
    * code refactoring
  - Add 0114-RHBZ-1196394-delayed-reintegration.patch
    * add new configuration options "delay_watch_checks" and
      "delay_wait_checks"
  - Add 0115-RHBZ-1198418-fix-double-free.patch
    * fix crash when multipath fails adding a multipath device
  - Add 0116-UPBZ-1188179-dell-36xxi.patch
    * New builtin config
  - Add 0117-RHBZ-1198424-autodetect-clariion-alua.patch
    * update default config
  - Add 0118-UPBZ-1200738-update-eternus-config.patch
    * update default config
  - Add 0119-RHBZ-1081397-save-alua-info.patch
    * make prioritizers save information between calls to speed them up.
  - Add 0120-RHBZ-1043093-realloc-fix.patch
    * free old memory if realloc fails.
  - Add 0121-RHBZ-1197234-rules-fix.patch
    * make sure kpartx runs after an DM_ACTIVATION event occurs.
  - Add 0122-RHBZ-1212590-dont-use-var.patch
    * use /run instead of /var/run
  - Add 0123-UPBZ-1166072-fix-path-offline.patch
    * Don't mark quiesce and transport-offline paths as offline
  - Modify mulfipth.conf default config file (bz #1194794)
  - Related: bz #1153832
  - Resolves: bz #631009, #1043093, #1081397, #1166072, #1169935, #1188179
  - Resolves: bz #1194794, #1194917, #1196394, #1197234, #1198418, #1198424
  - Resolves: bz #1200738, #1212590


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-79
changelog:
  - Add 0124-RHBZ-1209275-retrigger-uevents.patch
    * Make multipathd retrigger uevents when paths haven't successfully had
      their udev_attribute environment variable set by udev and add
      "retrigger_ties" and "retrigger_delay" to control this
  - Add 0125-RHBZ-1153832-kpartx-delete.patch
    * Delete all partition devices with -d (not just the ones in the partition
      table)
  - Add 0126-RHBZ-1211383-alias-collision.patch
    * make multipathd use the old alias, if rename failed and add
      "new_bindings_in_boot" to determine if new bindings can be added to
      the bindings file in the initramfs
  - Resolves: bz #1153832, #1209275, #1211383


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-80
changelog:
  - Add 0127-RHBZ-1201030-use-blk-availability.patch
    * Make multipath use blk-availability.service
  - Add 0128-RHBZ-1222123-mpathconf-allow.patch
    * Add mpathconf --allow for creating specialized config files.
  - Resolves: bz #1201030, #1222123


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-81
changelog:
  - Modify 0128-RHBZ-1222123-mpathconf-allow.patch
    * Fix up covscan complaints.
  - Related: bz #1222123


author: Benjmain Marzinski <bmarzins@redhat.com> 0.4.9-82
changelog:
  - Add 0129-UPBZ-1254292-iscsi-targetname.patch
    * check for targetname iscsi sysfs value
  - Resolves: bz #1254292


author: Benjmain Marzinski <bmarzins@redhat.com> 0.4.9-83
changelog:
  - Add 0130-RHBZ-1259523-host_name_len.patch
    * increase size of host string
  - Resolves: bz# 1259523


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-84
changelog:
  - 0131-UPBZ-1259831-lock-retry.patch
    * retry locking when creating multipath devices
  - Resolves: bz# 1259831


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-86
changelog:
  - Add 0132-RHBZ-1296979-fix-define.patch
    * look for the correct libudev function to set define
  - Resolves: bz # 1296979


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-87
changelog:
  - Add 0133-RHBZ-1241774-sun-partition-numbering.patch
    * makr kpartx device numbers match partition numbers
  - Add 0134-RHBZ-1241528-check-mpath-prefix.patch
    * only touch devices with a "mpath-" dm uuid prefix
  - Add 0135-RHBZ-1299600-path-dev-uevents.patch
    * trigger path uevent the first time a path is claimed by multipath
  - Add 0136-RHBZ-1304687-wait-for-map-add.patch
    * wait for the device to finish being added before reloading it.
  - Add 0137-RHBZ-1280524-clear-chkr-msg.patch
  - Add 0138-RHBZ-1288660-fix-mpathconf-allow.patch
    * don't remove existing lines from blacklist_exceptions section
  - Add 0139-RHBZ-1273173-queue-no-daemon-doc.patch
  - Add 0140-RHBZ-1299647-fix-help.patch
  - Add 0141-RHBZ-1303953-mpathpersist-typo.patch
  - Add 0142-RHBZ-1283750-kpartx-fix.patch
    * only remove devices if their uuid says that they are the correct
      partition device
  - Add 0143-RHBZ-1299648-kpartx-sync.patch
    * default to using udev sync mode
  - Add 0144-RHBZ-1299652-alua-pref-arg.patch
    * allow "exclusive_pref_bit" argument to alua prioritizer
  - Add 0145-UP-resize-help-msg.patch
  - Add 0146-UPBZ-1299651-raw-output.patch
    * allow raw format mutipathd show commands, that remove headers and padding
  - Add 0147-RHBZ-1272620-fail-rm-msg.patch
  - Add 0148-RHBZ-1292599-verify-before-remove.patch
    * verify that all partitions are unused before attempting to remove a device
  - Add 0149-RHBZ-1292599-restore-removed-parts.patch
    * don't disable kpartx when restoring the first path of a device.
  - Add 0150-RHBZ-1253913-fix-startup-msg.patch
    * wait for multipathd daemon to write pidfile before returning
  - Resolves: bz #1241528, #1241774, #1253913, #1272620, #1273173, #1280524
  - Resolves: bz #1283750, #1288660, #1292599, #1299600, #1299647, #1299648
  - Resolves: bz #1299651, #1299652, #1303953, #1304687


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-88
changelog:
  - Add 0151-RHBZ-1297456-weighted-fix.patch
    * add wwn keyword to weighted prioritizer for persistent naming
  - Add 0152-RHBZ-1269293-fix-blk-unit-file.patch
    * use "Wants" instead of "Requires"
  - Add 0153-RH-fix-i686-size-bug.patch
    * use 64-bit keycodes for multipathd client commands
  - Add 0154-UPBZ-1291406-disable-reinstate.patch
    * don't automatically reinstate ghost paths for implicit alua devices
  - Add 0155-UPBZ-1300415-PURE-config.patch
    * Add default config for PURE FlashArray
  - Add 0156-UPBZ-1313324-dont-fail-discovery.patch
    * don't fail discovery because individual paths failed.
  - Resolves: bz #1297456, #1269293, #1291406, #1300415, #1313324


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-89
changelog:
  - Modify 0151-RHBZ-1297456-weighted-fix.patch
    * add documentation
  - Add 0157-RHBZ-1319853-multipath-c-error-msg.patch
    * better error reporting for multipath -c
  - Add 0158-RHBZ-1318581-timestamp-doc-fix.patch
    * add documentation for -T
  - Add 0159-UPBZ-1255885-udev-waits.patch
    * make multipath and kpartx wait after for udev after each command
  - Resolves: bz #1297456, #1319853, #1318581, #1255885


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-90
changelog:
  - Modify 0159-UPBZ-1255885-udev-waits.patch
    * fix bug in failure path
  - Add 0160-RH-udev-flags.patch
  - Add 0161-RHBZ-1311659-no-kpartx.patch
    * skip_kpartx option disables kpartx running on multipath devices
  - Add 0162-RHBZ-1333331-huawei-config.patch
    * Add default config for Huawei XSG1 array
  - Add 0163-UPBZ-1333492-resize-map.patch
    * restore old size if resize fails
  - Add 0164-RHBZ-1311463-dos-part-rollover.patch
    * fix incorrect partition size due to 4k device size rollover
  - Resolves: bz #1255885, #1311463, #1311659, #1333331, #1333492


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-91
changelog:
  - Add 0165-UPBZ-1341748-MSA-2040-conf.patch
    * Add default config for MSA 2040 array
  - Resolves: bz #1341748


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-92
changelog:
  - Add 0166-RHBZ-1323429-dont-allow-new-wwid.patch
    * don't allow path wwid to change while it is in use
  - Add 0167-RHBZ-1335176-fix-show-cmds.patch
    * and new show multipath format wildcard, 'f' to sho number of failures.
      This will hopefully be useful for tracking what happens to multipath
      devices for bz #1335176
  - Resolves: bz #1323429


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-93
changelog:
  - Modify 0135-RHBZ-1299600-path-dev-uevents.patch
    * trigger uevents when adding wwids for existing devices during startup
  - Refresh 0136-RHBZ-1304687-wait-for-map-add.patch
  - Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
  - Add 0168-RHBZ-1347769-shared-lock.patch
    * make multipath lock the path devices with a shared lock
  - Add 0169-UPBZ-1353357-json-output.patch
    * add mulitpathd json output command
  - Resolves: bz #1299600, #1347769, #1353357


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-95
changelog:
  - Add 0170-UPBZ-1352925-fix-typo.patch
  - Add 0171-UPBZ-1356651-allow-zero-size.patch
    * Allow zero-sized paths to be added to a multipath device
  - Add 0172-RHBZ-1350931-no-active-add.patch
    * Allow paths to be added to a new map if no active paths exist. Also
      fixes 1351430
  - Resolves: bz #1350931, #1351430, #1352925, #1356651


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-96
changelog:
  - Modify 0136-RHBZ-1304687-wait-for-map-add.patch
    * change missing_uev_msg_delay to missing_uev_msg_timeout, and make
      multipathd re-enable table loads if the timeout has passed
  - Refresh 0137-RHBZ-1280524-clear-chkr-msg.patch
  - Refresh 0139-RHBZ-1273173-queue-no-daemon-doc.patch
  - Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
  - Refresh 0154-UPBZ-1291406-disable-reinstate.patch
  - Refresh 0155-UPBZ-1300415-PURE-config.patch
  - Refresh 0156-UPBZ-1313324-dont-fail-discovery.patch
  - Refresh 0161-RHBZ-1311659-no-kpartx.patch
  - Refresh 0167-RHBZ-1335176-fix-show-cmds.patch
  - Add 0173-RH-update-man-page.patch
  - Add 0174-RHBZ-1362396-modprobe.patch
    * make starting the multipathd service modprobe dm-multipath in the
      sysvinit scripts
  - Add 0175-RHBZ-1357382-ordering.patch
    * force multipathd.service to start after systemd-udev-trigger.service
  - Add 0176-RHBZ-1363830-fix-rename.patch
    * initialized a variable to make dm_rename not fail randomly
  - Resolves: bz #1304687, #1362396, #1357382, #1363830


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-97
changelog:
  - Add 0177-libmultipath-correctly-initialize-pp-sg_id.patch
    * This and all the following patches add the rbd patch checker
  - Add 0178-libmultipath-add-rbd-discovery.patch
  - Add 0179-multipath-tools-add-checker-callout-to-repair-path.patch
  - Add 0180-multipath-tools-Add-rbd-checker.patch
  - Add 0181-multipath-tools-Add-rbd-to-the-hwtable.patch
  - Add 0182-multipath-tools-check-for-initialized-checker-before.patch
  - Add 0183-multipathd-Don-t-call-repair-on-blacklisted-path.patch
  - Add 0184-rbd-fix-sync-repair-support.patch
  - Add 0185-rbd-check-for-nonshared-clients.patch
  - Add 0186-rbd-check-for-exclusive-lock-enabled.patch
  - Add 0187-rbd-fixup-log-messages.patch
  - Added BuildRequires on librados2-devel
  - Resolves: bz #1348372


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-98
changelog:
  - Modified 0180-multipath-tools-Add-rbd-checker.patch
    * make the rbd path checker only compile if librados2-devel is installed
  - Make librados2-devel only be BuildRequired on x86_64
  - Resolves: bz #1348372


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-99
changelog:
  - Add 0188-RHBZ-1368501-dont-exit.patch
    * make multipathd not exit if it encounters recoverable errors on startup
  - Resolves: bz #1368501


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-99.1
changelog:
  - Add 0189-RHBZ-1395298-rbd-lock-on-read.patch
    * pass lock_on_read when remapping image
  - Resolves: bz #1395298


author: Dave Jones <davej@redhat.com>
changelog:
  - Don't try to modify areas mmap'd read-only.
  - Don't build on ia64 any more.
    (It breaks on some boxes very badly, and works on very few).


author: Anton Arapov <anton@redhat.com> - 1:2.11-5
changelog:
  - Fix the wrong call of the dmi_chassis_type function call. Thus fix
    an issue on the systems with the chassis lock available, application
    doesn't fall out with the out of spec error anymore.


author: Anton Arapov <anton@redhat.com> - 1:2.11-7
changelog:
  - Add "PXE" to HP OEM Type 209 record output
  - Properly print the hexadecimal value of invalid string characters


author: Petr Oros <poros@redhat.com> - 1:2.12-6
changelog:
  - Add preliminary support for SMBIOS 64-bit entry point (Mark Salter)
  - Add support for DDR4 memmory


author: Petr Oros <poros@redhat.com> - 1:2.12-9
changelog:
  - dmioem: Decode Acer-specific DMI type 170
  - dmioem: Decode HP-specific DMI types 212 and 219
  - dmioem: Decode HP-specific DMI type 233, and refactored 209 and 221 to use a common function
  - Resolves: #1232501


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Moved ctags to gctags to fit in the more powerful for C (but less
    general) exuberant ctags as the binary /usr/bin/ctags and the
    man page /usr/man/man1/ctags.1


author: Michael Fulbright <msf@redhat.com>
changelog:
  - joy a new version of emacs! Of note - no lockdir any more.
  - use post/preun sections to handle numerous GNU info files


author: Michael Fulbright <msf@redhat.com>
changelog:
  - added multibyte support back into emacs 20.2
  - added wmconfig for X11 emacs
  - fixed some errant buildroot references


author: David S. Miller <davem@dm.cobaltmicro.com>
changelog:
  - fix signals when linked with glibc on non-Intel architectures
    NOTE: This patch is not needed with emacs >20.2


author: Paul Fisher <pnfisher@redhat.com>
changelog:
  - upgrade to 20.5a
  - remove python-mode, wheelmouse support, and auctex menu
  - import emacs.desktop with icon from GNOME


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fix descriptions and summary
  - fix permissions for emacs niaries (what the hell does 1755 means for a
    binary?)
  - added missing, as per emacs Changelog, NCURSES_OSPEED_T compilation
    flag; without it emacs on Linux is making global 'ospeed' short which
    is not the same as 'speed_t' expected by libraries. (reported by Michal
    Jaegermann <michal@harddata.com>)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fix bug #2988
  - recompile patched .el files (suggested by Pavel.Janik@linux.cz)
  - prereq /sbin/install-info


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - added a security patch from RUS-CERT, which fixes
    bugs mentioned in "Advisory 200004-01: GNU Emacs 20"


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - let the build system handle gzipping man pages and stripping
  - added patch to increase keyboard buffer size


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't apply the unexelf patch - use a new unexelf.c file
    from the 21 source tree (this will go into the 20.7 tree)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Version 20.7
  - Add requirement for final newline to the default .emacs
  - redid the Xaw3d patch
  - checked all patches, discarded those we've upstreamed


author: Matt Wilson <msw@redhat.com>
changelog:
  - edited japanese patch not to patch configure
  - fixed a missing escaped \" in a wc string
  - merge japanese support to head of development


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - (from MSW) different compression on IA64 to avoid hangs
  - remove etags/ctags - use a separate package. Disable patch1


author: Matt Wilson <msw@redhat.com>
changelog:
  - don't build with -O2 on alpha until we can track down the compiler
    bug that causes crashes in the garbage collector
  - removed all the nox Japanese packages


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - include python mode and change in site-start.el related to this
  - some changes to the default .emacs


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - remove ctags.1 and etags.1 from the emacs etc directory
    (#18011)
  - fix the emacs-nox not to use the locale.alias in XFree86
    (#18548)... copy it into /usr/share/emacs and patch
    the startup files to use it. Argh.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix icon name in the .desktop file
  - don't have site-start.el "noreplace"
  - load psgml-init (if present) in the default site-start.el
    to avoid psgml modifying the file


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add /usr/share/emacs/site-lisp/site-start.d
  - change site-start.el so files in the above directory
    are automatically run on startup
  - don't set the ispell name in site-start.el, use the
    above directory instead


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add rpm-spec-mode after modifying (use Red Hat groups,
    from /usr/share/doc/rpm-version/GROUPS) and fixing
    colours(don't specify "yellow" on "bright") Also,
    use gpg, not pgp.
  - use it (site-start.el)
  - add mwheel
  - use it, in /etc/skel/.emacs


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - do locale.alias fix for emacs-nox only, as it somehow
    broke the subject line in gnus. Weird.
  - update to gnus 5.8.7


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add /usr/share/emacs/locale.alias , which had gone AWOL
  - update rpm-spec-mode to 0.11a, fresh from the author
    (Stig Bjorlykke <stigb@tihlde.org>). The changes we made
    are integrated.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Much cleaner site-start.d sourcing
  - Add more build dependencies
  - Add the emacs lisp reference info pages (RFE #44577)
  - Don't require tamago - just plug it in for Japanese support


author: Trond Eivind Glomsrød <teg@redhat.com> 20.7-42
changelog:
  - Update python-mode to the version in the python 2.2a3
  - Include po-mode in emacs, instead of including in gettext


author: Trond Eivind Glomsrød <teg@redhat.com> 20.7-43
changelog:
  - Add php-mode 0.9.9
  - Add URL (#54603)
  - don't run autoconf/libtoolize during build - they're broken
  - don't build on IA64 until they are fixed


author: Trond Eivind Glomsrød <teg@redhat.com> 21.1-0.1
changelog:
  - 21.1
  - Build on IA64 again - the default config now handles it
  - Drop all old patches
  - Misc cleanups
  - Update the elisp manual to 21-2.7
  - Deprecate the emacs-nox and emacs-X11 subpackages.
    Simplify build procedure to match.
  - Update php-mode to 1.0.0


author: Jens Petersen <petersen@redhat.com> 21.2-19
changelog:
  - own our libexec dir (#73984)
  - only set transient-mark-mode in dotemacs for Emacs (#75440)
  - update to latest config.{guess,sub}
  - use _datadir macro


author: Jens Petersen <petersen@redhat.com> 21.2-20
changelog:
  - add support for x86_64 and merge in s390 support from cvs
  - add alloca defines to amdx86-64.h (from SuSE)


author: Jens Petersen <petersen@redhat.com> 21.2-23
changelog:
  - set transient-mark-mode in dotemacs for Emacs not XEmacs (#75440)
  - update rpm-spec-mode.el to 0.12
    - define needed XEmacs compat functions in new rpm-spec-mode-init.el
  - tidy site-start.el
    - move python-mode setup to python-mode
  - don't build with sbin in path
  - use _libexecdir, _bindir and _sysconfdir
  - don't gzip info files explicitly
  - use tar's C and j options
  - generate lisp file-lists in single find sweeps over lisp and leim dirs
    - use -fprint and -fprintf
    - correct more dir ownerships


author: Jens Petersen <petersen@redhat.com>
changelog:
  - use LC_CTYPE rather than LANG to determine default encoding (#78678)
    [reported by starback@stp.ling.uu.se]


author: Jens Petersen <petersen@redhat.com> 21.2-24
changelog:
  - rpm-spec-mode update fixes
    - patch in XEmacs compat functions rather than defining them with apel
      macros in init file (#78764)
    - autoload "rpm-spec-mode" not "rpm-spec-mode.el" in same file
  - let emacs base also own leim dir to avoid startup warning about missing dir
    when -el and -leim aren't installed (#78764)


author: Jens Petersen <petersen@redhat.com> 21.2-27
changelog:
  - look at LANG after LC_CTYPE when checking for UTF-8 locale encoding
    in site-start.el (#79535)
  - don't set desktop file config(noreplace)


author: Jens Petersen <petersen@redhat.com> 21.2-29
changelog:
  - update to newer po-mode.el and po-compat.el from gettext-0.11.4
  - patch po-mode's po-replace-revision-date for when
    po-auto-replace-revision-date is nil (#71264)
  - update po-mode-init.el
  - examine LC_ALL before LC_CTYPE in site-start.el for utf-8 (#79535)
  - don't install etc/DOC files explicitly by hand
  - make sure all lisp .elc files are up to date
  - pass _smp_mflags to make
  - remove games that we shouldn't ship


author: Jens Petersen <petersen@redhat.com> - 21.2-31
changelog:
  - block input in allocate_vectorlike to prevent malloc hangs (#83600)
    [thanks to Jim Blandy]
  - set startup wmclass notify in desktop file


author: Jens Petersen <petersen@redhat.com> - 21.2-32
changelog:
  - set X copy'n'paste encoding to extended compound-text (#74100)
    by default in .emacs file [suggested by olonho@hotmail.com]
  - .emacs file cleanup (xemacs now has a separate init file)


author: Jens Petersen <petersen@redhat.com> - 21.3-1
changelog:
  - update to 21.3
  - no longer set compound-text-with-extensions in dotemacs, since it is now
    the default
  - emacs-21.2-pop.patch is no longer needed
  - update php-mode to 1.0.4


author: Jens Petersen <petersen@redhat.com> - 21.3-2
changelog:
  - add Mule-UCS for CJK utf-8 support (suggested by Akira Tagoh)
    and use it by default in CJK UTF-8 locale
  - move emacs-asian startup files into new lang-coding-systems-init.el
  - utf-8 setup in site-start.el is no longer needed in Emacs 21.3
  - generate filelist for site-lisp automatically like base lisp and leim
  - don't setup aspell in site-start.el
  - rename dotemacs to dotemacs.el and move former contents to new default.el


author: Jens Petersen <petersen@redhat.com> - 21.3-3
changelog:
  - use Mule-UCS utf-8 coding-system for CJK subprocess IO
  - no need to set fontset anymore in CJK locale


author: Jens Petersen <petersen@redhat.com> - 21.3-5
changelog:
  - move transient-mark-mode and global-font-lock-mode setting from default.el
    back to dotemacs, so as not to surprise old users (#90193)
    [reported by jik@kamens.brookline.ma.us]
  - change require-final-newline to query (default.el)
  - don't make a backup when applying browse-url-htmlview-84262.patch (#90226)
    [reported by mitr@volny.cz]


author: Jens Petersen <petersen@redhat.com> - 21.3-7
changelog:
  - use "setarch i386" to build on ix86 (#101818) [reported by Michael Redinger]
  - use __make to %build and %install
  - set keyboard coding-system for utf-8 in lang-coding-systems-init.el (#106929)
    [reported with fix by Axel Thimm]
  - add source url for MuleUCS
  - update base package description (#103551) [reported by Tim Landscheidt]


author: Jens Petersen <petersen@redhat.com> - 21.3-8
changelog:
  - comment out setting transient-mark-mode in skel .emacs (#102441,#90193)
    [reported by mal@gromco.com, Jonathan Kamens]
  - improve lang-coding-systems-init.el to set-language-environment for CJK
    utf-8 locale too and use utf-8 for default-coding-systems and
    terminal-coding-system (#111172) [Yoshinori Kuniga]
  - update rpm-spec-mode.el to newer one in xemacs package cvs (#105888) [Dams]
  - rename etags to etags.emacs and make etags a symlink to it at install time
    if it doesn't exist (#92256) [marc_soft@merlins.org]
  - apply editfns.c-Fformat-multibyte-davej.patch to fix multibyte code typo
    in Fformat [patch from Dave Jones]
  - add runtime requirements for XFree86-libs, image libraries, ncurses and zlib
  - improve -el and -leim package summaries
  - no longer configure build with redundant --with-gcc


author: Jens Petersen <petersen@redhat.com> - 21.3-9
changelog:
  - bring back emacs-nox subpackage (emacs built without X support) (#113001)
    [suggested by Frank Kruchio]
  - base emacs package now only contains emacs binary built with X support
    and no longer obsoletes emacs-nox
  - all the common files required by emacs and emacs-nox are now in emacs-common
  - update php-mode.el to 1.0.5
  - add missing rfc1345.el leim input method
  - update po-compat.el to version in gettext-0.13.1
  - update base package summary
  - add url for python-mode.el and php-mode.el
  - gctags is now a symlink to ctags.emacs


author: Mike A. Harris <mharris@redhat.com> 21.3-11
changelog:
  - Removed bogus Requires: XFree86-libs that was added in 21.3-8, as rpm
    find-requires will automatically pick up the dependancies on any runtime
    libraries, and such hard coded requires is not X11 implementation
    agnostic (#118471)


author: Jens Petersen <petersen@redhat.com> - 21.3-12
changelog:
  - update php-mode to 1.1.0
  - add emacs-21.3-no-rpath.patch so that /usr/X11R6/lib is not rpath'ed
  - require /bin/ln for %post (Tim Waugh, 119817)
  - move prereq for dev and /sbin/install-info to emacs-common
  - leim no longer requires emacs
  - use source site-lisp dir in %prep to setup site files
  - define and use site_lisp for buildroot in %install
  - default ispell dictionary to "english" for CJK locale
  - add comment to top of site-start.el about load order
  - turn on auto-compression-mode in default.el (114808)
  - set require-final-newline with setq (David Olsson,119141)
    and remove redundant next-line-add-newlines setting
  - update info_file list (Reuben Thomas,114729)


author: Jens Petersen <petersen@redhat.com> - 21.3-13
changelog:
  - unset focus-follows-mouse in default.el to make switching frames work for
    click-to-focus (Theodore Belding,114736)


author: Jens Petersen <petersen@redhat.com> - 21.3-15
changelog:
  - cleanup and update .desktop file
  - make emacs not appear in the desktop menu (Seth Nickell,132567)
  - move the desktop file from -common to main package
  - go back to using just gctags for ctags
  - etags is now handled by alternatives (92256)
  - improve the default frame title by prefixing the buffer name
    (Christopher Beland, 128110)
  - fix the names of some European aspell languages with
    emacs-21.3-lisp-textmodes-ispell-languages.patch (David Jansen, 122618)
  - fixing running "libtool gdb program" in gud with
    emacs-21.3-gud-libtool-fix.patch (Dave Malcolm, 130955)


author: Jens Petersen <petersen@redhat.com> - 21.3-16
changelog:
  - do not setup frame-title-format in default.el, since it will override
    setting by users (Henrik Bakken, 134520)
  - emacs-el no longer requires emacs for the sake of -nox users
    (Lars Hupfeldt Nielsen, 134479)
  - condition calling of global-font-lock-mode in default .emacs
    in case xemacs should happen to load it


author: Jens Petersen <petersen@redhat.com> - 21.3-18
changelog:
  - show emacs again in the desktop menu (132567)
  - require fonts-xorg-75dpi to prevent empty boxes at startup due to missing
    fonts (Johannes Kaiser, 137060)


author: Jens Petersen <petersen@redhat.com> - 21.3.50-0.20041111
changelog:
  - initial packaging of cvs emacs
    - leim and elisp manual now in main tarball
    - no leim subpackage anymore, so make common obsolete it
    - no longer need MuleUCS, nor rfc1345.el
    - buildrequire and use autoconf rather autoconf213
    - no longer need emacs-21.2-x86_64.patch,
      editfns.c-Fformat-multibyte-davej.patch
    - bring back game for now
    - TODO: some patches still need updating
    - fns.el no longer installed
    - remove /var/games for now
    - update filelist generation to single sweep
    - update info_files list


author: Jens Petersen <petersen@redhat.com> - 21.3-19
changelog:
  - prefer XIM status under-the-window for now to stop xft httx from dying
    (125413): add emacs-xim-status-under-window-125413.patch
  - default diff to unified format in .emacs


author: Jens Petersen <petersen@redhat.com> - 21.3-20
changelog:
  - workaround xorg-x11 modifier key problem with
    emacs-21.3-xterm-modifiers-137868.patch (Thomas Woerner, 137868)


author: Jens Petersen <petersen@redhat.com> - 21.3-21
changelog:
  - fix CAN-2005-0100 movemail vulnerability with movemail-CAN-2005-0100.patch
    (Max Vozeler, 146701)


author: Jens Petersen <petersen@redhat.com> - 21.3-22
changelog:
  - use prereq instead of contexts for common script requirements
    (Axel Thimm, 147791)
  - move emacs.png from common to main package


author: Jens Petersen <petersen@redhat.com> - 21.3-23
changelog:
  - install %{_bindir}/emacs-nox as a hardlink of the versioned binary
  - drop explicit lib requirements
  - use sed instead of perl to fix up filelists


author: Jens Petersen <petersen@redhat.com> - 21.3-24
changelog:
  - mark default.el as a noreplace config file (Pawel Salek, 149310)
  - only set keyboard-coding-system in xterms to fix problem with input
    Latin characters becoming prefixes and making emacs loop
    (Eddahbi Karim, 126007)
  - make emacs-el own its lisp directories
  - run latex-mode-hook in latex-mode (Martin Biely, 144083)
    - add emacs-21.3-latex-mode-hook-144083.patch


author: Jens Petersen <petersen@redhat.com> - 21.3-25
changelog:
  - add tramp-2.1.3 to site-lisp (David Woodhouse, 149703)
    - move removal of info dir to after its installation
    - add tramp-init.el to put tramp into load-path


author: Jens Petersen <petersen@redhat.com> - 21.3-27
changelog:
  - use alternatives to switch _bindir/emacs between emacs and emacs-nox
    (Henning Schmiedehausen, #151067)
    - remove emacs and emacs-nox from bindir
    - prereq alternatives for emacs and emacs-nox
    - add post and postun scripts to handle alternatives
  - buildrequire xorg-x11-devel instead of XFree86-devel
  - really include and apply emacs-21.3-latex-mode-hook-144083.patch
  - make emacs and emacs-nox own _datadir/emacs/version too


author: Jens Petersen <petersen@redhat.com> - 22.0.50-0.20050406
changelog:
  - update to snapshot of current cvs 
    - configure xim support off by default
    - bootstrap snapshot


author: Jens Petersen <petersen@redhat.com> - 21.4-1
changelog:
  - update to 21.4 movemail vulnerability release
    - no longer need movemail-CAN-2005-0100.patch
  - replace %{_bindir}/emacs alternatives with a wrapper script (Warren Togami)
    to prevent it from disappearing when upgrading (Michal Jaegermann, 154326)
    - suffix the X emacs binaries with -x and the no X binaries with -nox
    - the wrapper script %{_bindir}/emacs-%version runs emacs-x if installed or
      otherwise emacs-nox.  %{_bindir}/emacs is a symlink to the wrapper
  - make emacs and emacs-nox own the subdirs in %{_libexecdir}
  - add a bunch of fixes from debian's emacs21_21.4a-1 patch:
      battery-acpi-support.dpatch, bzero-and-have-stdlib.dpatch,
      coding-region-leak.dpatch, detect-coding-iso2022.dpatch,
      fix-batch-mode-signal-handling.dpatch, pcl-cvs-format.dpatch,
      python-completion-ignored-extensions.dpatch,
      remote-files-permissions.dpatch, save-buffer.dpatch, scroll-margin.dpatch,
      xfree86-4.3-modifiers.dpatch
    - add fix-x-vs-no-x-diffs.dpatch
      - define emacs_libexecdir
      - build both emacs and emacs-nox as %{version}.1 and move common DOC file
        to emacs-common
      - suffix version in fns-%{version}.1.el with -x and -nox respectively
  - add 100 to elisp patches


author: Jens Petersen <petersen@redhat.com> - 21.4-2
changelog:
  - update etags to 17.11 (idht4n@hotmail.com, 151390)
    - add etags-14.21-17.11-diff.patch
  - replace i386 setarch redefinitions of __make and makeinstall with
    emacs-21.4-setarch_for_loadup-101818.patch and setting SETARCH on i386
    (Jason Vas Dias, 101818)


author: Jens Petersen <petersen@redhat.com> - 21.4-4
changelog:
  - don't accidently exclude emacsclient from common package
    (Jonathan Kamens, #157808)
  - traditional Chinese desktop file translation (Wei-Lun Chao, #157287)


author: Jens Petersen <petersen@redhat.com> - 21.4-5
changelog:
  - update cc-mode to 5.30.9 stable release to address font-lock problems
    (126165,148977,150197,155292,158044)


author: Jens Petersen <petersen@redhat.com>
changelog:
  - move setting of require-final-newline from default.el to a comment in default
    .emacs (Ralph Loader, 119141)


author: Jens Petersen <petersen@redhat.com> - 21.4-6
changelog:
  - merge in changes from emacs22.spec conditionally
    - define emacs21 rpm macro switch to control major version and use it
  - update tramp to 2.0.49


author: Jens Petersen <petersen@redhat.com> - 21.4-7
changelog:
  - update rpm-spec-mode.el to cvs revision 1.17 (Ville Skyttä)
    - fixes expansion of %{?dist}
  - replace emacs-21.4-setarch_for_loadup-101818.patch with backport
    emacs-21-personality-linux32-101818.patch from cvs (Jan Djärv)
    which also turns off address randomization during dumping (Masatake Yamato)
    - no longer need to pass SETARCH to make on i386 (#160814)
  - move ownership of %{_datadir}/emacs/ and %{_datadir}/emacs/%{version}/
    from emacs to emacs-el and emacs-leim subpackages
  - don't build tramp html and dvi documentation
  - drop src/config.in part of bzero-and-have-stdlib.dpatch to avoid
    compiler warnings


author: Jens Petersen <petersen@redhat.com>
changelog:
  - fix name of aspell-es dictionary (#147964)
    - update emacs-21.3-lisp-textmodes-ispell-languages.patch


author: Jens Petersen <petersen@redhat.com> - 21.4-9
changelog:
  - fix keyboard-coding-system on console for utf-8 (Dawid Gajownik, #173855)
  - update etags to latest cvs (Hideki Iwamoto, #173023)
    - replace etags-14.21-17.11-diff.patch with etags-update-to-cvs.patch
  - update smtpmail.el to latest cvs version for better authentication support
    with smtpmail-cvs-update.patch (Alberto Brizio, #167804)


author: Jens Petersen <petersen@redhat.com> - 21.4-11
changelog:
  - avoid building with -fstack-protector on i386 to prevent crashing
    (Jonathan Kamens, #174730)
  - require xorg-x11-fonts-ISO8859-1-75dpi instead of xorg-x11-fonts-75dpi
    for modular X (#174614)


author: Jens Petersen <petersen@redhat.com> - 21.4-12
changelog:
  - add mule-cmd.el-X11-locale.alias-173781.patch to correct location of X11
    locale.alias file (Paul Dickson, #173781)
  - fix autoload of php-mode in php-mode-init.el (Christopher Beland, #179484)


author: Jens Petersen <petersen@redhat.com> - 21.4-13
changelog:
  - buildrequire libXaw-devel for menus and scrollbar
  - pass -R to setarch to disable address randomization during dumping
    (Sam Peterson, #174736)
  - install cc-mode.info correctly (Sam Peterson, #182084)
  - fix sort-columns not to use deprecated non-posix sort key syntax
    with sort-columns-posix-key-182282.patch (Richard Ryniker, #182282)
  - use system-name function not variable when setting frame-title-format in
    /etc/skel/.emacs for XEmacs users hitting .emacs


author: Jens Petersen <petersen@redhat.com>
changelog:
  - avoid backup for fix-x-vs-no-x-diffs.dpatch (Ian Collier, #183503)
  - remove the old ccmode info manual (#182084)


author: Jens Petersen <petersen@redhat.com> - 21.4-14
changelog:
  - bring back setarch for i386 with -R option in spec file and drop
    emacs-21-personality-linux32-101818.patch since it no longer seems
    sufficient with recent kernels (Sam Peterson, #174736)
  - buildrequire giflib-devel instead of libungif-devel


author: Chip Coldwell <coldwell@redhat.com> - 22.0.92-1
changelog:
  - new pretest version
  - removed almost all emacs 21 patches from emacs 22
  - clean up spec file,
  - many new BuildRequires (David Woodhouse #221250)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.93-1
changelog:
  - new pretest version
  - removed setarch since new dumper copes with execshield
  - clean up site initialization files (varions #176171)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.93-4
changelog:
  - fixup loaddefs.el dependencies (Dan Nicolaescu #176171)
  - add BuildRequires: automake (changes to Makefile.in)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.99-1
changelog:
  - new (last?) pretest tarball from FSF
  - update to php-mode-1.2.0 (Ville Skyttä Resolves: bz235941)
  - use /etc/alternatives instead of wrapper script


author: Chip Coldwell <coldwell@redhat.com> - 22.0.99-4
changelog:
  - format of freed blocks changed between glibc 2.5.90-21 and 2.5.90-22
  - BuildRequires: glibc >= 2.5.90-22 (Ulrich Drepper)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.990-1
changelog:
  - new pretest tarball from FSF
  - removed Ulrich Drepper's patch to prevent mmapped pages during dumping
    removed BuildRequires: glibc >= 2.5.90-22
    (bug traced to glibc Resolves: bz239344)
  - fix alternatives removal scriptlet (Resolves: bz239745)


author: Chip Coldwell <coldwell@redhat.com> - 22.0.990-2
changelog:
  - revert all spec file changes since 22.0.95-1 (Resolves: bz239745)
  - new pretest tarball from FSF (Resolves: bz238234)
  - restore php-mode (Resolves: bz235941)


author: Chip Coldwell <coldwell@redhat.com> - 22.1-1
changelog:
  - move alternatives install to posttrans scriptlet (Resolves: bz239745)
  - new release tarball from FSF (Resolves: bz245303)
  - new php-mode 1.2.0


author: Chip Coldwell <coldwell@redhat.com> - 22.1-2
changelog:
  - add pkgconfig file for emacs-common and virtual provides (Resolves: bz242176)
  - glibc-open-macro.patch to deal with glibc turning "open" into a macro.
  - leave emacs info pages in default section (Resolves: bz199008)


author: Chip Coldwell <coldwell@redhat.com> - 22.1-4
changelog:
  - fix pkgconfig path (from pkg-config to pkgconfig (Jonathan Underwood)
  - use macro instead of variable style for buildroot.


author: Chip Coldwell <coldwell@redhat.com> - 22.1-5
changelog:
  - require xorg-x11-fonts-ISO8859-1-100dpi instead of 75dpi (Resolves: bz281861)
  - drop broken python mode (Resolves: bz262801)


author: Chip Coldwell <coldwell@redhat.com> 23.0.60-2
changelog:
  - New upstream tarball (fixes bz435767)
  - configure tweaks
  - drop files.el patch (now upstream)
  - drop parallel build patch (now upstream)


author: Chip Coldwell <coldwell@redhat.com> 22.2-1
changelog:
  - revert back to emacs-22.2 (bz443639)
  - update to php-mode-1.4.0
  - update to rpm-spec-mode.el v0.12.1x (bz432209)
  - patch rpm-spec-mode to use compilation mode (bz227418)
  - fix the Release tag (bz440624)
  - drop superfluous configure options
  - move the new icons into the right destination directory
  - the heuristics for detecting address space randomization in the emacs dumper
    seem insufficient, so bring back setarch -R


author: Jens Petersen <petersen@redhat.com> - 1:22.3-1
changelog:
  - update to 22.3 (#461448)
  - emacs-22.1.50-sparc64.patch and emacs-22.1.50-regex.patch no longer needed
  - update rpm-spec-mode.el to look for fields at bol (#466407)


author: Daniel Novotny <dnovotny@redhat.com> 1:22.3-5
changelog:
  - fix #474578 - /usr/bin/emacs link not updated on upgrade
    (added a script to scan the alternatives and update them)


author: Jens Petersen <petersen@redhat.com> - 1:23.0.93-3
changelog:
  - drop igrep since lgrep and rgrep are maintained in emacs now
  - specify the list of *-init.el files to be install explicitly


author: Daniel Novotny <dnovotny@redhat.com> 1:23.0.93-5
changelog:
  - revoked default.el change (#508033)
  - added build dependency: librsvg2-devel (#507852)
  - added dependency: aspell (#443549)


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1-11
changelog:
  - Update macros.xemacs to treat epoch correctly and be consistent with xemacs package
  - Use site_start_d macro consistently


author: Jens Petersen <petersen@redhat.com> - 1:23.1-19
changelog:
  - m17n-lib-flt requires m17n-db-flt so no longer need to require explicitly
    m17n-db-datafiles for complex text rendering (#542657)


author: Karel Klic <kklic@redhat.com> 1:23.1-22
changelog:
  - Removed invalid URL for rpm-spec-mode.el. This mode is no longer
    found on Internet in this version.


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1-25
changelog:
  - Add --eval '(progn (setq load-path (cons "." load-path)))' to byte
    compilation macro for packaging add-ons


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1-26
changelog:
  - Fix broken byte compilation of emacs2.py and emacs3.py with the relevant
    python binaries - requires turning off brp-python-bytecompile script


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1.94-4
changelog:
  - Remove unnecessary buildroot tag
  - Remove explicit dependency on librsvg2 (but keep BuildRequires for
    librsvg2-devel)
  - Add properly versioned Provides for emacs(bin)
  - Remove long unneeded Obsoletes for emacs-leim
  - Fix summary for emacs-el


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1.94-5
changelog:
  - Fix typo in spec file changelog
  - Use standard %patch macro to apply all patches to silent rpmlint warnings


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1:23.1.96-2
changelog:
  - Remove po-mode files since they are now packaged separately as a sub-package
    of gettext (RHBZ #579452)


author: Karel Klíč <kklic@redhat.com> - 1:23.2-4
changelog:
  - Add patch to fix rhbz#595546 hideshow library matches wrong parenthesis
    under certain circumstances
  - Removed %clean section


author: Karel Klic <kklic@redhat.com> - 1:23.2-6
changelog:
  - Removed Obsoletes: emacs-nxml-mode, it was obsoleted in F-11
  - Added COPYING to emacs-el, moved COPYING in emacs-common to %doc


author: Karel Klic <kklic@redhat.com> - 1:23.2-11
changelog:
  - Own /usr/bin/emacs (rhbz#614935)
  - Updated the handling of alternatives to match
    https://fedoraproject.org/wiki/Packaging:Alternatives


author: Karel Klic <kklic@redhat.com> - 1:23.2-12
changelog:
  - Mention xdg-open in browse-url-default-browser docstring (rhbz#624359)
    Updates emacs-23.1-xdg.patch


author: Karel Klic <kklic@redhat.com> - 1:23.2-13
changelog:
  - Removed transient-mark-mode suggestion from dotemacs.el, as this
    minor mode is enabled by default in recent versions of Emacs


author: Karel Klic <kklic@redhat.com> - 1:23.2-16
changelog:
  - Removed dependency on both hunspell and aspell. Emacs does not
    _require_ spell checker, e.g. if user wants to uninstall one, there
    is no reason why Emacs should also be uninstalled. Emacs can run one
    like it can run GDB, pychecker, (La)TeX, make, gcc, and all VCSs out
    there.
  - Removed conflict with old gettext package
  - Cleaned spec file header
  - Removed gcc-4.5.0 specific CFLAGS


author: Karel Klic <kklic@redhat.com> - 1:23.3-2
changelog:
  - Another attempt to fix the handling of alternatives (rhbz#684447)
    The current process loses alternatives preference on every upgrade,
    but there seems to be no elegant way how to prevent this while
    having versioned binaries (/bin/emacs-%{version}) at the same time.
  - Removed 'rm -rf %{buildroot}' from %install section


author: Ville Skyttä <ville.skytta@iki.fi> - 1:23.3-3
changelog:
  - Use UTC timestamps in rpm-spec-mode changelog entries by default (rhbz#672350)
  - Consider *.elc in addition to *.el when loading files from site-start.d (rhbz#672324)


author: Karel Klíč <kklic@redhat.com> - 1:23.3-5
changelog:
  - Removed %defattr from %files sections, as RPM no longer needs it
  - Removed %dir %{_libexecdir}/emacs and similar from emacs and
    emacs-nox packages, as the directories are used and present only in
    emacs-common (rhbz#704067)


author: Ville Skyttä <ville.skytta@iki.fi> - 1:23.3-7
changelog:
  - Use custom-set-variables for customizable variables in .emacs (#716440).
  - Move frame-title-format default from .emacs to default.el (#716443).


author: Karel Klíč <kklic@redhat.com> - 1:23.3-8
changelog:
  - Updated release archive to 23.3a, which includes grammar files that are
    necessary to modify Semantic parsers


author: Karel Klíč <kklic@redhat.com> - 1:23.3-10
changelog:
  - Keep COPYING and NEWS in the etc subdir, and symlinks in the docs (rhbz#714212)
    Author: fedora.dm0@gmail.com


author: Ville Skyttä <ville.skytta@iki.fi> - 1:23.3-11
changelog:
  - Build with gpm and liblockfile support.
  - Drop ssl.el (superseded by tls.el).
  - Update php-mode to 1.5.0.


author: Karel Klíč <kklic@redhat.com> - 1:23.3-19
changelog:
  - Added patch to handle CVE-2012-0035: CEDET global-ede-mode file loading vulnerability (rhbz#773024)


author: Karel Klíč <kklic@redhat.com> - 1:24.0.94-1
changelog:
  - Update to the newest prerelease
  - Remove unpatched files in the lisp directory, where all files are
    installed


author: Karel Klíč <kklic@redhat.com> - 1:24.1-3
changelog:
  - Fix org-mode to work without emacs-el installed. rhbz#830162
  - Fix building without gets function, which is removed from recent version of glibc.


author: Karel Klíč <kklic@redhat.com> - 1:24.1-6
changelog:
  - Fix CVE-2012-3479: Evaluation of 'eval' forms in file-local variable
    sections, when 'enable-local-variables' set to ':safe'


author: Karel Klíč <kklic@redhat.com> - 1:24.2-1
changelog:
  - Updated to the newest upstream release
  - Switched from bz2 upstream package to xz
  - Make the spec file usable on EL6
  - Removed the nogets and CVE-2012-3479 patches, because the upstream
    package fixes the associated issues
  - Added GFDL license to emacs-common package


author: Karel Klíč <kklic@redhat.com> - 1:24.2-2
changelog:
  - Removed focus-init.el which used to set focus-follows-mouse to nil.
    It is set to nil by default in Emacs 24.2.


author: Ralf Corsépius <corsepiu@fedoraproject.org> - 1:24.2-11
changelog:
  - Remove %config from %{_sysconfdir}/rpm/macros.*
    (https://fedorahosted.org/fpc/ticket/259).
  - Fix broken spec-file changelog entry.


author: Petr Hracek <phracek@redhat.com> - 1:24.3-1
changelog:
  - Updated to the newest upstream release
  - solved problem with distribution flag in case of rhel
  - rcs-checking not availble anymore
  - emacs22.png are not installed anymore


author: Petr Hracek <phracek@redhat.com> - 1:24.3-3
changelog:
  - Fix for emacs bug 112144, style_changed_cb (#922519) 
  - Fix for emacs bug 112131, bell does not work (#562719)


author: Joe Orton <jorton@redhat.com> 1.95.8-9
changelog:
  - regenerate configure/libtool correctly (#199361)
  - strip DSP files from examples (#186889)
  - fix expat.h compilation with g++ -pedantic (#190244)


author: Joe Orton <jorton@redhat.com> 1.95.8-10
changelog:
  - remove trailing dot in Summary (#225742)
  - use preferred BuildRoot per packaging guidelines (#225742)


author: Joe Orton <jorton@redhat.com> - 2.0.1-8
changelog:
  - add security fix for CVE-2009-3560 (#533174)
  - add security fix for CVE-2009-3720 (#531697)
  - run the test suite


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.7-2
changelog:
  - minor corrections in spec file
  - moved init script to correct location
  - correction in the init script (chkconfig directives)


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.7-6
changelog:
  - renamed init script to fcoe, changed lock filename to fcoe
    (#497604)
  - init script modified to do condrestart properly
  - some modifications in spec file to apply previous change
    to older versions od init script during update
  - fixed issue with accepting long options (#498551)


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.12-1
changelog:
  - rebased to version 1.0.12, improved functionality with lldpad
    and dcbd
  - removed /etc/fcoe/scripts/fcoeplumb


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.14-2
changelog:
  - added device-mapper-multipath to requires (#603242)
  - added missing man pages for fcrls, fcnsq and fcping
  - update of init script - added condrestart, try-restart
    and force-reload options
  - added vconfig to requires (#589608)


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.0.17-1
changelog:
  - Pull in new upstream release (required to build)
  - Fix git clone URL in comments
  - Drop fcoe-utils-1.0.7-init.patch, fcoe-utils-1.0.7-init-condrestart.patch
    and fcoe-utils-1.0.8-init-LSB.patch that are now upstream
  - Drop fcoe-utils-1.0.8-includes.patch and use a copy of kernel headers
    for all architectures (rename fcoe-sparc.patch to fcoe-include-headers.patch)
    Upstream added detection to avoid inclusion of kernel headers in the build
    and it expects to find the userland headers installed. Those have not
    yet propagated in Fedora.
    Use temporary this workaround, since fcoe is a requiment for anaconda
    and it failed to build for a while
  - Drop BuildRequires on kernel-devel
  - Add BuildRequires on autoconf (it is used and not installed by default
    on all build chroots)


author: Petr Sabata <psabata@redhat.com> - 1.0.18-1
changelog:
  - 1.0.18 bump with latest bugfixes
  - Removing ExcludeArch completely; not related for Fedora
  - Buildroot cleanup


author: Petr Sabata <contyk@redhat.com> - 1.0.20-2
changelog:
  - Drop SysV support in favor of systemd (#714683)
  - Remove ancient scriptlets (pre-1.0.7 era)
  - Update quickstart.txt to reflect new changes


author: Petr Šabata <contyk@redhat.com> - 1.0.25-1
changelog:
  * Tue Aug 28 2012 Petr Šabata <contyk@redhat.com> - 1.0.24-2
  - Migrate to systemd scriptlets (#850104)


author: Petr Šabata <contyk@redhat.com> - 1.0.28-3
changelog:
  - Require just 'systemd' instead of 'systemd-units'
  - Patch the fcoemon manpage with a note for systemd users


author: Petr Šabata <contyk@redhat.com> - 1.0.29-2
changelog:
  - Bug #1024124:
  - Don't install the old configuration file alongside the new one
  - Add bnx2fc to the SUPPORTED_DRIVERS for consistency with previous configuration


author: Petr Šabata <contyk@redhat.com> - 1.0.29-5
changelog:
  - Don't build on s390x again (#1073060)
  - Drop bnx2fc from SUPPORTED_DRIVERS on s390x, for future (#1056371)
  - Update fcoemon(8) with more systemd changes (#1049162)


author: Chris Leech <cleech@redhat.com> - 1.0.30-4.git91c0c8c
changelog:
  - 1039779 replace README that contained mostly build instructions with
    README.redhat containing better distro-specific information


author: Chris Leech <cleech@redhat.com> - 1.0.31-1.git5dfd3e4
changelog:
  - 1274530 rebase to upstream 1.0.31+
  - no longer requires libhbaapi/libhbalinux
  - no longer attempts to connect to lldpad if DC_REQUIRED is configured off
    for all interfaces


author: Marek Grac <mgrac@redhat.com> - 4.0.2-3
changelog:
  - fence_bladecenter: Fix telnet login failure
  - fence_brocade: Rewrite to fencing library
  - fencing_snmp: Fix 'KeyError --a'
  - fence_scsi: Fix XML metadata
  - fence_scsi: Add a documentation of "delay"
  - fence_ilo2: Unable to login when password contains "


author: Marek Grac <mgrac@redhat.com> - 4.0.2-4
changelog:
  - fence_vmware_soap: Disable cache in SUDS library to resolve SELinux problems
    Resolves: rhbz#1022528
  - fencing: Add information that operation 'unfence' should be run automatically after start of the cluster
    Resolves: rhbz#1012994
  - Aligned to upstream 4.0.4


author: Marek Grac <mgrac@redhat.com> - 4.0.2-5
changelog:
  - fence_vmware_soap: Report if user privileges are not enough for given operation
    Resolves: rhbz#1018780
  - fence_wti: Add support for named groups
    Resolves: rhbz#1022536
  - fence_rsb: Update regular expression to match newer firmware version
    Resolves: rhbz#1022538


author: Marek Grac <mgrac@redhat.com> - 4.0.2-6
changelog:
  - fencing: Ensure validity of XML metadata using Relax NG 
    Resolves: rhbz#1022529
  - fencing: Fix invalid use of options[".."]
    Resolves: rhbz#1022533
  - fence_brocade: Add fence agent
    Resolves: rhbz#1021392


author: Marek Grac <mgrac@redhat.com> - 4.0.2-8
changelog:
  - fence-agents-all now includes fence-virt which is not available everywhere
    Resolves: rhbz#1028940


author: Marek Grac <mgrac@redhat.com> - 4.0.2-10
changelog:
  - fix default action for fabric fencing agents
    Resolves: rhbz#1021392
  - modify key generation in fence_scsi to support pacemaker/corosync cluster
    Resolves: rhbz#994466


author: Marek Grac <mgrac@redhat.com> - 4.0.2-13
changelog:
  - fencing: Do not use public key if identity file is not defined
    Resolves: rhbz#1048843
  - fence_vmware_soap: Add support for --delay option
    Resolves: rhbz#1057299
  - fence_wti: Add support for named groups (also for firmware 1.43)
    Resolves: rhbz#1022536


author: Marek Grac <mgrac@redhat.com> - 4.0.2-14
changelog:
  - fence_vmware_soap: Fix unexpected exception
    Resolves: rhbz#1018780
  - nss_wrapper was replaced by gnutls-cli
    Resolves: rhbz#990539


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 4.0.2-17
changelog:
  - Fix fence-agents-* Requires on proper fence-agents-common and silence
    suds error
    Resolves: rhbz#1018780


author: Marek Grac <mgrac@redhat.com> - 4.0.11-1
changelog:
  - rebase of fence agents
    Resolves: rhbz#1120682
  - INFO: fence_scsi_check.pl is now a python script


author: Marek Grac <mgrac@redhat.com> - 4.0.11-5
changelog:
  - fence_wti: Fix problem with EOL introduced by rebase
    Resolves: rhbz#1148762
  - fence_rsb: Fix issue with new firmware 
    Resolves: rhbz#1111597


author: Marek Grac <mgrac@redhat.com> - 4.0.11-6
changelog:
  - fence_cisco_ucs and fence_vmware_soap should logout even in case of failure
    Resolves: rhbz#1111599
  - fence_vmware_soap: Fix issue with import of fail_usage
    Resolves: rhbz#1153059


author: Marek Grac <mgrac@redhat.com> - 4.0.11-9
changelog:
  - fence_ilo_ssh: Fix EOL issue, syslog problem and add fence_ilo_[34]_ssh symlink
    Resolves: rhbz#1121122


author: Marek Grac <mgrac@redhat.com> - 4.0.11-11
changelog:
  - fence_ipmilan: Unset default cipher
    Resolves: rhbz#1203877
  - fence_ilo2: Add --tls1.0
    Resolves: rhbz#1199970
  - update scripts so 'make check' is working again


author: Marek Grac <mgrac@redhat.com> - 4.0.11-13
changelog:
  - fence_scsi: Add monitor operation
    Resolves: rhbz#1213571
  - fence_scsi: Force unfence if any of paths is off
    Resolves: rhbz#1214919
  - fence_cisco_ucs: Fix https:// prefix with --ssl-(in)secure
    Resolves: rhbz#1165591
  - fence_kdump: Add monitor operation
    Resolves: rhbz#1196068
  - fence2rng: Fix problem with quotes
    Resolves: rhbz#1207982


author: Marek Grac <mgrac@redhat.com> - 4.0.11-14
changelog:
  - fence_rhevm: Add authentication via cookies
    Resolves: rhbz#1145769
  - fence_ilo_moonshot: New fence agent
    Resolves: rhbz#1152917
  - fence_emerson: New fence agent
    Resolves: rhbz#1171732
  - fence_rsa: New fence agent
    Resolves: rhbz#1185329


author: Marek Grac <mgrac@redhat.com> - 4.0.11-16
changelog:
  - fence_compute: Agent cleanup
    Resolves: rhbz#1214359
  - fence_hpblade: Add support for HP Integrity Superdome
    Resolves: rhbz#1216997
  - fence_zvmip: Add --missing-as-off and change monitor/status actions
    Resolves: rhbz#1188750
  - fence_mpath: new fence agent
    Resolves: rhbz#1102727
  - fencing: Option --port-as-ip
    Resolves: rhbz#1214522


author: Marek Grac <mgrac@redhat.com> - 4.0.11-18
changelog:
  - fence_rsa: Fix login issue
    Resolves: rhbz#1185329
  - fencing: support for list-status
    Resolves: rhbz#1250586
  - fencing: Fix support for --port-as-ip
    Resolves: rhbz#1214522


author: Marek Grac <mgrac@redhat.com> - 4.0.11-21
changelog:
  - fence_mpath: Fix unfencing after non-cluster reboot
    Resolves: 1102727
  - manual pages now describe 'list-status' properly

  bz1102727-3-fence_mpath.patch bz1250586-2-list_status.patch


author: Marek Grac <mgrac@redhat.com> - 4.0.11-24
changelog:
  - fence_ipmilan: Add removed attributes -i & timeout
    Resolves: rhbz#1257137
  - fence_ipmilan: Do not print password in verbose mode
    Resolves: rhbz#1241648
  - fence_ilo: Negotiation of TLS1.0 is more automatic
    Resolves: rhbz#1256908


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.0.11-34
changelog:
  - fence_virsh: add --missing-as-off
    Resolves: rhbz#1254821
  - fence_ipmilan: fix power_wait regression
    Resolves: rhbz#1275250
  - fence_ipmilan: add diag action
    Resolves: rhbz#1286045
  - fence_ipmilan: warn that cycle method can report success before node
    is powered off
    Resolves: rhbz#1271780
  - fence_scsi: fix persistentl typo in short desc
    Resolves: rhbz#1280139
  - fence_scsi: remove /dev/dm-X reference
    Resolves: rhbz#1280151
  - fence_rhevm: add Filter header
    Resolves: rhbz#1287059
  - fence_amt_ws: new fence agent
    Resolves: rhbz#1296201
  - fence_compute: fix to locate all instances to be evacuated
   Resolves: rhbz#1313561


author: Oyvind Albrigtsen <oalbrigt@redhat.com> - 4.0.11-44
changelog:
  - fence_mpath: update info to say unique key per node instead of per
    node/device
    Resolves: rhbz#1280151


author: Martin Stransky <stransky@redhat.com> - 24.4.0-3
changelog:
  - Added a workaround for Bug 1054242 - RHEVM: Extremely high memory
    usage in Firefox 24 ESR on RHEL 6.5


author: Thomas Woerner <twoerner@redhat.com> 0.1.1-1
changelog:
  - new version 0.1.1
  - fixed source path in POTFILES*
  - added missing firewall_config.py.in
  - added misssing space for spec_ver line
  - using firewall_config.VARLOGFILE
  - added date to logging output
  - also log fatal and error logs to stderr and firewall_config.VARLOGFILE
  - make log message for active_firewalld fatal


author: Thomas Woerner <twoerner@redhat.com> 0.1.2-1
changelog:
  - fixed package according to package review (rhbz#665395):
    - non executable scripts: dropped shebang
    - using newer GPL license file
    - made /etc/dbus-1/system.d/FirewallD.conf config(noreplace)
    - added requires(post) and (pre) for chkconfig


author: Thomas Woerner <twoerner@redhat.com> 0.1.3-1
changelog:
  - new version 0.1.3
  - restore all firewall features for reload: panic and virt rules and chains
  - string fixes for firewall-cmd man page (by Jiri Popelka)
  - fixed firewall-cmd port list (by Jiri Popelka)
  - added firewall dbus client connect check to firewall-cmd (by Jiri Popelka)
  - translation updates: de, es, gu, it, ja, kn, ml, nl, or, pa, pl, ru, ta,
                         uk, zh_CN


author: Thomas Woerner <twoerner@redhat.com> 0.2.0-1
changelog:
  - version 0.2.0 with new FirewallD1 D-BUS interface
  - supports zones with a default zone
  - new direct interface as a replacement of the partial virt interface with 
    additional passthrough functionality
  - dropped custom rules, use direct interface instead
  - dropped trusted interface funcionality, use trusted zone instead
  - using zone, service and icmptype configuration files
  - not using any system-config-firewall parts anymore


author: Thomas Woerner <twoerner@redhat.com> 0.2.0-2
changelog:
  - added glib2-devel to build requires, needed for gsettings.m4
  - added --with-system-unitdir arg to fix installaiton of system file
  - added glib-compile-schemas calls for postun and posttrans
  - added EXTRA_DIST file lists


author: Thomas Woerner <twoerner@redhat.com>
changelog:
  - moved zones, services and icmptypes to /usr/lib/firewalld, can be overloaded
    by files in /etc/firewalld (no overload of immutable zones block, drop,
    trusted)


author: Thomas Woerner <twoerner@redhat.com> 0.2.2-1
changelog:
  - enabled dhcpv6-client service for zones home and work
  - new dhcpv6-client service
  - firewall-cmd: query mode returns reversed values
  - new zone.changeZone(zone, interface)
  - moved zones, services and icmptypes to /usr/lib/firewalld, can be overloaded
    by files in /etc/firewalld (no overload of immutable zones block, drop,
    trusted)
  - reset MinimalMark in firewalld.cnf to default value
  - fixed service destination (addresses not used)
  - fix xmlplus to be compatible with the python xml sax parser and python 3
    by adding __contains__ to xml.sax.xmlreader.AttributesImpl
  - use icon and glib related post, postun and posttrans scriptes for firewall
  - firewall-cmd: fix typo in state
  - firewall-cmd: fix usage()
  - firewall-cmd: fix interface action description in usage()
  - client.py: fix definition of queryInterface()
  - client.py: fix typo in getInterfaces()
  - firewalld.service: do not fork
  - firewall-cmd: fix bug in --list=port and --port action help message
  - firewall-cmd: fix bug in --list=service


author: Thomas Woerner <twoerner@redhat.com> 0.2.3-1
changelog:
  - firewall-cmd: several changes and fixes
  - code cleanup
  - fixed icmp protocol used for ipv6 (rhbz#801182)
  - added and fixed some comments
  - properly restore zone settings, timeout is always set, check for 0
  - some FirewallError exceptions were actually not raised
  - do not REJECT in each zone
  - removeInterface() don't require zone
  - new tests in firewall-test script
  - dbus_to_python() was ignoring certain values
  - added functions for the direct interface: chains, rules, passthrough
  - fixed inconsistent data after reload
  - some fixes for the direct interface: priority positions are bound to ipv,
    table and chain
  - added support for direct interface in firewall-cmd:
  - added isImmutable(zone) to zone D-Bus interface
  - renamed policy file
  - enhancements for error messages, enables output for direct.passthrough
  - added allow_any to firewald policies, using at leas auth_admin for policies
  - replaced ENABLE_FAILED, DISABLE_FAILED, ADD_FAILED and REMOVE_FAILED by
    COMMAND_FAILED, resorted error codes
  - new firewalld configuration setting CleanupOnExit
  - enabled polkit again, found a fix for property problem with slip.dbus.service
  - added dhcpv6-client to 'public' (the default) and to 'internal' zones.
  - fixed missing settings form zone config files in
    "firewall-cmd --list=all --zone=<zone>" call
  - added list functions for services and icmptypes, added --list=services and
    --list=icmptypes to firewall-cmd


author: Thomas Woerner <twoerner@redhat.com> 0.2.5-1
changelog:
  - Fixed traceback in firewall-cmd for failed or canceled authorization, 
    return proper error codes, new error codes NOT_RUNNING and NOT_AUTHORIZED
  - Enhanced firewalld service file (RHBZ#806868) and (RHBZ#811240)
  - Fixed duplicates in zone after reload, enabled timed settings after reload
  - Removed conntrack --ctstate INVALID check from default ruleset, because it
    results in ICMP problems (RHBZ#806017).
  - Update interfaces in default zone after reload (rhbz#804814)
  - New man pages for firewalld(1), firewalld.conf(5), firewalld.icmptype(5),
    firewalld.service(5) and firewalld.zone(5), updated firewall-cmd man page
    (RHBZ#811257)
  - Fixed firewall-cmd help output
  - Fixed missing icon for firewall-applet (RHBZ#808759)
  - Added root user check for firewalld (RHBZ#767654)
  - Fixed requirements of firewall-applet sub package (RHBZ#808746)
  - Update interfaces in default zone after changing of default zone (RHBZ#804814)
  - Start firewalld before NetworkManager (RHBZ#811240)
  - Add Type=dbus and BusName to service file (RHBZ#811240)


author: Thomas Woerner <twoerner@redhat.com> 0.2.6-1
changelog:
  - New D-BUS interface for persistent configuration
  - Aded support for persistent zone configuration in firewall-cmd
  - New Shields Up feature in firewall-applet
  - New requirements for python-decorator and pygobject3
  - New firewall-config sub-package
  - New firewall-convert-scfw-config config script


author: Thomas Woerner <twoerner@redhat.com> 0.2.8-1
changelog:
  - Do not apply old settings to zones after reload
  - FirewallClient: Added callback structure for firewalld signals
  - New firewall-config with full zone, service and icmptype support
  - Added Shields Up/Down configuration dialog to firewall-applet
  - Name attribute of main tag deprecated for zones, services and icmptypes,
    will be ignored if present
  - Fixed wrong references in firewalld man page
  - Unregister DBus interfaces after sending out the Removed signal
  - Use proper DBus signature in addIcmpType, addService and addZone
  - New builtin property for config interfaces
  - New test case for Config interface
  - spec: use new systemd-rpm macros (rhbz#850110)
  - More config file verifications
  - Lots of smaller fixes and enhancements


author: Thomas Woerner <twoerner@redhat.com> 0.2.9-1
changelog:
  - firewall-config: some UI usability changes
  - firewall-cmd: New option --list-all-zones, output of --list-all changed,
    more option combination checks
  - firewall-applet: Replaced NMClient by direct DBUS calls to fix python core
    dumps in case of connection activates/deactivates
  - Use fallback 'C' locale if current locale isn't supported (RHBZ#860278)
  - Add interfaces to zones again after reload
  - firewall-cmd: use FirewallClient().connected value
  - firewall-cmd: --remove-interface was not working due to a typo
  - Do not use restorecon for new and backup files
  - Fixed use of properties REJECT and DROP
  - firewalld_test.py: check interfaces after reload
  - Translation updates
  - Renamed firewall-convert-scfw-config to firewall-offline-cmd, used by
    anaconda for firewall configuration (e.g. kickstart)
  - Fix python shebang to use -Es at installation time for bin_SCRIPTS and
    sbin_SCRIPTS and at all times in gtk3_chooserbutton.py
  - tests/firewalld_config.py: update test_zones() test case
  - Config interface: improve renaming of zones/services/icmp_types
  - Move emiting of Added signals closer to source.
  - FirewallClient(): config:ServiceAdded signal was wrongly mapped
  - Add argument 'name' to Removed signal
  - firewall-config: Add callbacks for config:[service|icmp]-[added|removed]
  - firewall-config: catch INVALID_X error when removing zone/service/icmp_type
  - firewall-config: remove unused code
  - Revert "Neutralize _xmlplus instead of conforming it"
  - firewall-applet: some UI usability changes
  - firewall-cmd: ALREADY_ENABLED, NOT_ENABLED, ZONE_ALREADY_SET are warnings


author: Thomas Woerner <twoerner@redhat.com> 0.2.10-1
changelog:
  - tests/firewalld_config.py: tests for config.service and config.icmptype
  - FirewallClientConfigServiceSettings(): destinations are dict not list
  - service/zone/icmptype: do not write deprecated name attribute
  - New service ntp
  - firewall-config: Fixed name of about dialog
  - configure.in: Fixed getting of error codes
  - Added coding to all pyhton files
  - Fixed copyright years
  - Beautified file headers
  - Force use of pygobject3 in python-slip (RHBZ#874378)
  - Log: firewall.server.config_icmptype, firewall.server.config_service and
    firewall.server.config_zone: Prepend full path
  - Allow ":" in interface names for interface aliases
  - Add name argument to Updated and Renamed signal
  - Disable IPv4, IPv6 and EB tables if missing - for IPv4/IPv6 only environments
  - firewall-config.glade file cleanup
  - firewall-config: loadDefaults() can throw exception
  - Use toolbars for Add/Edit/Remove/LoadDefaults buttons for zones, services
    and icmp types
  - New vnc-server service, opens ports for displays :0 to :3 (RHBZ#877035)
  - firewall-cmd: Fix typo in help output, allow default zone usage for
    permanenent options
  - Translation updates: cs, fr, ja, pt_BR and zh_CN


author: Thomas Woerner <twoerner@redhat.com> 0.2.11-1
changelog:
  - Fixed more _xmlplus (PyXML) incompatibilities to python xml
  - Several man page updates
  - Fixed error in addForwardPort, removeForwardPort and queryForwardPort
  - firewall-cmd: use already existing queryForwardPort()
  - Update firewall.cmd man page, use man page as firewall-cmd usage (rhbz#876394)
  - firewall-config: Do not force to show labels in the main toolbar
  - firewall-config: Dropped "Change default zone" from toolbar
  - firewall-config: Added menu entry to change zones of connections
  - firewall-applet: Zones can be changed now using nm-connection-editor
    (rhbz#876661)
  - translation updates: cs, hu, ja


author: Thomas Woerner <twoerner@redhat.com> 0.2.11-2
changelog:
  - require pygobject3-base instead of pygobject3 (no cairo needed) (RHBZ#874378)
  - fixed dependencies of firewall-config to use gtk3 with pygobject3-base and 
    not pygtk2


author: Thomas Woerner <twoerner@redhat.com> 0.2.12-1
changelog:
  - firewall-cmd: use -V instead of -v for version info (RHBZ#886477)
  - firewall-cmd: don't check reload()'s return value (RHBZ#886461)
  - actually install firewalld.zones.5
  - firewall-config: treat exceptions when adding new zone/service/icmp
    (RHBZ#886602)
  - firewalld.spec: Fixed requirements of firewall-config to use gtk2 and
    pygobject3
  - Fail gracefully when running in non X environment.(RHBZ#886551)
  - offline-cmd: fail gracefully when no s-c-f config
  - fix duplicated iptables rules (RHBZ#886515)
  - detect errors and duplicates in config file (RHBZ#886581)
  - firewall-config: don't make 'Edit Service' and 'Edit ICMP Type' insensitive
  - firewalld.spec: fixed requirements, require pygobject3-base
  - frewall-applet: Unused code cleanup
  - firewall-applet: several usability fixes and enhancements
    (RHBZ#886531) (RHBZ#886534)
  - firewall/server/server.py: fixed KeyboardInterrupt message (RHBZ#886558)
  - Moved fallback zone and minimal_mark to firewall.config.__init__
  - Do not raise ZONE_ALREADY_SET in change_zone if old zone is set again
    (RHBZ#886432)
  - Make default zone default for all unset connections/interfaces
    (RHBZ#888288) (RHBZ#882736)
  - firewall-config: Use Gtk.MessageType.WARNING for warning dialog
  - firewall-config: Handle unknown services and icmptypes in persistent mode
  - firewall-config: Do not load settings more than once
  - firewall-config: UI cleanup and fixes (RHBZ#888242)
  - firewall-cmd: created alias --change-zone for --change-interface
  - firewall-cmd man page updates (RHBZ#806511)
  - Merged branch 'build-cleanups'
  - dropped call to autogen.sh in build stage, not needed anymore due to 
    'build-cleanups' merge


author: Jiri Popelka <jpopelka@redhat.com> - 0.2.12-2
changelog:
  - Default zone in firewalld.conf was reseted with every restart (RHBZ#902845)
  - Add icon cache related scriptlets for firewall-config (RHBZ#902680)
  - Fix typo in firewall-config (RHBZ#895812)
  - Fix few mistakes in firewall-cmd(1) man page


author: Thomas Woerner <twoerner@redhat.com> 0.3.0-1
changelog:
  - Added rich language support
  - Added lockdown feature
  - Allow to bind interfaces and sources to zones permanently
  - Enabled IPv6 NAT support
    masquerading and port/packet forwarding for IPv6 only with rich language
  - Handle polkit errors in client class and firewall-config
  - Added priority description for --direct --add-rule in firewall-cmd man page
  - Add XML Schemas for zones/services/icmptypes XMLs
  - Don't keep file descriptors open when forking
  - Introduce --nopid option for firewalld
  - New FORWARD_IN_ZONES and FORWARD_OUT_ZONES chains (RHBZ#912782)
  - Update cluster-suite service (RHBZ#885257)
  - firewall-cmd: rename --enable/disable-panic to --panic-on/off (RHBZ#874912)
  - Fix interaction problem of changed event of gtk combobox with polkit-kde
    by processing all remaining events (RHBZ#915892)
  - Stop default zone rules being applied to all zones (RHBZ#912782)
  - Firewall.start(): don't call set_default_zone()
  - Add wiki's URL to firewalld(1) and firewall-cmd(1) man pages
  - firewalld-cmd: make --state verbose (RHBZ#886484)
  - improve firewalld --help (RHBZ#910492)
  - firewall-cmd: --add/remove-* can be used multiple times (RHBZ#879834)
  - Continue loading zone in case of wrong service/port etc. (RHBZ#909466)
  - Check also services and icmptypes in Zone() (RHBZ#909466)
  - Increase the maximum length of the port forwarding fields from 5 to 11 in
    firewall-config
  - firewall-cmd: add usage to fail message
  - firewall-cmd: redefine usage to point to man page
  - firewall-cmd: fix visible problems with arg. parsing
  - Use argparse module for parsing command line options and arguments
  - firewall-cmd.1: better clarify where to find ACTIONs
  - firewall-cmd Bash completion
  - firewall-cmd.1: comment --zone=<zone> usage and move some options
  - Use zone's target only in %s_ZONES chains
  - default zone in firewalld.conf was set to public with every restart (#902845)
  - man page cleanup
  - code cleanup


author: Thomas Woerner <twoerner@redhat.com> 0.3.1-1
changelog:
  - Use explicit file lists for make dist
  - New rich rule validation check code
  - New global check_port and check_address functions
  - Allow source white and black listing with the rich rule
  - Fix error handling in case of unsupported family in rich rule
  - Enable ip_forwarding in masquerade and forward-port
  - New functions to read and write simple files using filename and content
  - Add --enable-sysconfig to install Fedora-specific sysconfig config file.
  - Add chains for security table (RHBZ#927015)
  - firewalld.spec: no need to specify --with-systemd-unitdir
  - firewalld.service: remove syslog.target and dbus.target
  - firewalld.service: replace hard-coded paths
  - Move bash-completion to new location.
  - Revert "Added configure for new build env"
  - Revert "Added Makefile.in files"
  - Revert "Added po/Makefile.in.in"
  - Revert "Added po/LINGUAS"
  - Revert "Added aclocal.m4"
  - Amend zone XML Schema


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.2-1
changelog:
  - Fix signal handling for SIGTERM
  - Additional service files (RHBZ#914859)
  - Updated po files
  - s/persistent/permanent/ (Trac Ticket #7)
  - Better behaviour when running without valid DISPLAY (RHBZ#955414)
  - client.handle_exceptions(): do not loop forever
  - Set Zone.defaults in zone_reader (RHBZ#951747)
  - client: do not pass the dbus exception name to handler
  - IO_Object_XMLGenerator: make it work with Python 2.7.4 (RHBZ#951741)
  - firewall-cmd: do not use deprecated BaseException.message
  - client.py: fix handle_exceptions() (RHBZ#951314)
  - firewall-config: check zone/service/icmptype name (RHBZ#947820)
  - Allow 3121/tcp (pacemaker_remote) in cluster-suite service. (RHBZ#885257)
  - firewall-applet: fix default zone hangling in 'shields-up' (RHBZ#947230)
  - FirewallError.get_code(): check for unknown error


author: Thomas Woerner <twoerner@redhat.com> 0.3.3-1
changelog:
  - new service files
  - relicensed logger.py under GPLv2+
  - firewall-config: sometimes we don't want to use client's exception handler
  - When removing Service/IcmpType remove it from zones too (RHBZ#958401)
  - firewall-config: work-around masquerade_check_cb() being called more times
  - Zone(IO): add interfaces/sources to D-Bus signature
  - Added missing UNKNOWN_SOURCE error code
  - fw_zone.check_source: Raise INVALID_FAMILY if family is invalid
  - New changeZoneOfInterface method, marked changeZone as deprecated
  - Fixed firewall-cmd man page entry for --panic-on
  - firewall-applet: Fixed possible problems of unescaped strings used for markup
  - New support to bind zones to source addresses and ranges (D-BUS, cmd, applet
  - Cleanup of unused variables in FirewallD.start
  - New firewall/fw_types.py with LastUpdatedOrderedDict
  - direct.chains, direct.rules: Using LastUpdatedOrderedDict
  - Support splitted zone files
  - New reader and writer for stored direct chains and rules
  - LockdownWhitelist: fix write(), add get_commands/uids/users/contexts()
  - fix service_writer() and icmptype_writer() to put newline at end of file
  - firewall-cmd: fix --list-sources
  - No need to specify whether source address family is IPv4 or IPv6
  - add getZoneOfSource() to D-Bus interface
  - Add tests and bash-completion for the new "source" operations
  - Convert all input args in D-Bus methods
  - setDefaultZone() was calling accessCheck() *after* the action
  - New uniqify() function to remove duplicates from list whilst preserving order
  - Zone.combine() merge also services and ports
  - config/applet: silence DBusException during start when FirewallD is not running (RHBZ#966518)
  - firewall-applet: more fixes to make the address sources family agnostic
  - Better defaults for lockdown white list
  - Use auth_admin_keep for allow_any and allow_inactive also
  - New D-Bus API for lockdown policies
  - Use IPv4, IPv6 and BRIDGE for FirewallD properties
  - Use rich rule action as audit type
  - Prototype of string-only D-Bus interface for rich language
  - Fixed wrongly merged source family check in firewall/core/io/zone.py
  - handle_cmr: report errors, cleanup modules in error case only, mark handling
  - Use audit type from rule action, fixed rule output
  - Fixed lockdown whitelist D-Bus handling method names
  - New rich rule handling in runtime D-Bus interface
  - Added interface, source and rich rule handling (runtime and permanent)
  - Fixed dbus_obj in FirewallClientConfigPolicies, added queryLockdown
  - Write changes in setLockdownWhitelist
  - Fixed typo in policies log message in method calls
  - firewall-cmd: Added rich rule, lockdown and lockdown whitelist handling
  - Don't check access in query/getLockdownWhitelist*()
  - firewall-cmd: Also output masquerade flag in --list-all
  - firewall-cmd: argparse is able to convert argument to desired type itself
  - firewall-cmd_test.sh: tests for permanent interfaces/sources and lockdown whitelist
  - Makefile.am: add missing files
  - firewall-cmd_test.sh: tests for rich rules
  - Added lockdown, source, interface and rich rule docs to firewall-cmd
  - Do not masquerade lo if masquerade is enabled in the default zone (RHBZ#904098)
  - Use <rule> in metavar for firewall-cmd parser


author: Jiri Popelka <jpopelka@redhat.com>
changelog:
  - Remove migrating to a systemd unit file from a SysV initscript
  - Remove pointless "ExclusiveOS" tag


author: Thomas Woerner <twoerner@redhat.com> 0.3.4-1
changelog:
  - several rich rule check enhancements and fixes
  - firewall-cmd: direct options - check ipv4|ipv6|eb (RHBZ#970505)
  - firewall-cmd(1): improve description of direct options (RHBZ#970509)
  - several firewall-applet enhancements and fixes
  - New README
  - several doc and man page fixes
  - Service definitions for PCP daemons (RHBZ#972262)
  - bash-completion: add lockdown and rich language options
  - firewall-cmd: add --permanent --list-all[-zones]
  - firewall-cmd: new -q/--quiet option
  - firewall-cmd: warn when default zone not active (RHBZ#971843)
  - firewall-cmd: check priority in --add-rule (RHBZ#914955)
  - add dhcpv6 (for server) service (RHBZ#917866)
  - firewall-cmd: add --permanent --get-zone-of-interface/source --change-interface/source
  - firewall-cmd: print result (yes/no) of all --query-* commands
  - move permanent-getZoneOf{Interface|Source} from firewall-cmd to server
  - Check Interfaces/sources when updating permanent zone settings.
  - FirewallDConfig: getZoneOfInterface/Source can actually return more zones
  - Fixed toaddr check in forward port to only allow single address, no range
  - firewall-cmd: various output improvements
  - fw_zone: use check_single_address from firewall.functions
  - getZoneOfInterface/Source does not need to throw exception
  - firewall.functions: Use socket.inet_pton in checkIP, fixed checkIP*nMask
  - firewall.core.io.service: Properly check port/proto and destination address
  - Install applet desktop file into /etc/xdg/autostart
  - Fixed option problem with rich rule destinations (RHBZ#979804)
  - Better exception creation in dbus_handle_exceptions() decorator (RHBZ#979790)
  - Updated firewall-offline-cmd
  - Use priority in add, remove, query and list of direct rules (RHBZ#979509)
  - New documentation (man pages are created from docbook sources)
  - firewall/core/io/direct.py: use prirority for rule methods, new get_all_ methods
  - direct: pass priority also to client.py and firewall-cmd
  - applet: New blink and blink-count settings
  - firewall.functions: New function ppid_of_pid
  - applet: Check for gnome3 and fix it, use new settings, new size-changed cb
  - firewall-offline-cmd: Fix use of systemctl in chroot
  - firewall-config: use string.ascii_letters instead of string.letters
  - dbus_to_python(): handle non-ascii chars in dbus.String.
  - Modernize old syntax constructions.
  - dict.keys() in Python 3 returns a "view" instead of list
  - Use gettext.install() to install _() in builtins namespace.
  - Allow non-ascii chars in 'short' and 'description'
  - README: More information for "Working With The Source Repository"
  - Build environment fixes
  - firewalld.spec: Added missing checks for rhel > 6 for pygobject3-base
  - firewall-applet: New setting show-inactive
  - Don't stop on reload when lockdown already enabled (RHBZ#987403)
  - firewall-cmd: --lockdown-on/off did not touch firewalld.conf
  - FirewallApplet.gschema.xml: Dropped unused sender-info setting
  - doc/firewall-applet.xml: Added information about gsettings
  - several debug and log message fixes
  - Add chain for sources so they can be checked before interfaces (RHBZ#903222)
  - Add dhcp and proxy-dhcp services (RHBZ#986947)
  - io/Zone(): don't error on deprecated family attr of source elem
  - Limit length of zone file name (to 12 chars) due to Netfilter internals.
  - It was not possible to overload a zone with defined source(s).
  - DEFAULT_ZONE_TARGET: {chain}_ZONE_{zone} -> {chain}_{zone}
  - New runtime get<X>Settings for services and icmptypes, fixed policies callbacks
  - functions: New functions checkUser, checkUid and checkCommand
  - src/firewall/client: Fixed lockdown-whitelist-updated signal handling
  - firewall-cmd(1): move firewalld.richlanguage(5) reference in --*-rich-rule
  - Rich rule service: Only add modules for accept action
  - firewall/core/rich: Several fixes and enhanced checks
  - Fixed reload of direct rules
  - firewall/client: New functions to set and get the exception handler
  - firewall-config: New and enhanced UI to handle lockdown and rich rules
  - zone's immutable attribute is redundant
  - Do not allow to set settings in config for immutable zones.
  - Ignore deprecated 'immutable' attribute in zone files.
  - Eviscerate 'immutable' completely.
  - FirewallDirect.query_rule(): fix it
  - permanent direct: activate firewall.core.io.direct:Direct reader
  - core/io/*: simplify getting of character data
  - FirewallDirect.set_config(): allow reloading


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.5-1
changelog:
  - Only use one PK action for configuration (RHBZ#994729)
  - firewall-cmd: indicate non-zero exit code with red color
  - rich-rule: enable to have log without prefix & log_level & limit
  - log-level warn/err -> warning/error (RHBZ#1009436)
  - Use policy DROP while reloading, do not reset policy in restart twice
  - Add _direct chains to all table and chain combinations
  - documentation improvements
  - New firewalld.direct(5) man page docbook source
  - tests/firewall-cmd_test.sh: make rich language tests work
  - Rich_Rule._import_from_string(): improve error messages (RHBZ#994150)
  - direct.passthrough wasn't always matching out_signature (RHBZ#967800)
  - firewall-config: twist ICMP Type IP address family logic.
  - firewall-config: port-forwarding/masquerading dialog (RHBZ#993658)
  - firewall-offline-cmd: New --remove-service=<service> option (BZ#969106)
  - firewall-config: Options->Lockdown was not changing permanent.
  - firewall-config: edit line on doubleclick (RHBZ#993572)
  - firewall-config: System Default Zone -> Default Zone (RHBZ#993811)
  - New direct D-Bus interface, persistent direct rule handling, enabled passthough
  - src/firewall-cmd: Fixed help output to use more visual parameters
  - src/firewall-cmd: New usage output, no redirection to man page anymore
  - src/firewall/core/rich.py: Fixed forwad port destinations
  - src/firewall-offline-cmd: Early enable/disable handling now with mask/unmask
  - doc/xml/firewalld.zone.xml: Added more information about masquerade use
  - Prefix to log message is optional (RHBZ#998079)
  - firewall-cmd: fix --permanent --change-interface (RHBZ#997974)
  - Sort zones/interfaces/service/icmptypes on output.
  - wbem-https service (RHBZ#996668)
  - applet&config: add support for KDE NetworkManager connection editor
  - firewall/core/fw_config.py: New method update_lockdown_whitelist
  - Added missing file watcher for lockdown whitelist in config D-Bus interface
  - firewall/core/watcher: New add_watch_file for lockdown-whitelist and direct
  - Make use of IPv6 NAT conditional, based on kernel number (RHBZ#967376)


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.6-1
changelog:
  - firewalld.richlanguage.xml: correct log levels (RHBZ#993740)
  - firewall-config: Make sure that all zone settings are updated properly on firewalld restart
  - Rich_Limit: Allow long representation for duration (RHBZ#994103
  - firewall-config: Show "Changes applied." after changes (RHBZ#993643)
  - Use own connection dialog to change zones for NM connections
  - Rename service cluster-suite to high-availability (RHBZ#885257)
  - Permanent direct support for firewall-config and firewall-cmd
  - Try to avoid file descriptor leaking (RHBZ#951900)
  - New functions to split and join args properly (honoring quotes)
  - firewall-cmd(1): 2 simple examples
  - Better IPv6 NAT checking.
  - Ship firewalld.direct(5).


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.6.2-1
changelog:
  - firewall-offline-cmd: --forward-port 'toaddr' is optional (RHBZ#1014958)
  - firewall-cmd: fix variable name (RHBZ#1015011)


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.7-1
changelog:
  - Don't fail on missing ip[6]tables/ebtables table. (RHBZ#967376)
  - bash-completion: --permanent --direct options
  - firewall/core/fw.py: fix checking for iptables & ip6tables (RHBZ#1017087)
  - firewall-cmd: use client's exception_handler instead of catching exceptions ourselves
  - FirewallClientZoneSettings: fix {add|remove|query}RichRule()
  - Extend amanda-client service with 10080/tcp (RHBZ#1016867)
  - Simplify Rich_Rule()_lexer() by using functions.splitArgs()
  - Fix encoding problems in exception handling (RHBZ#1015941)


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.8-1
changelog:
  - fix memory leaks
  - New option --debug-gc
  - Python3 compatibility
  - Better non-ascii support
  - several firewall-config & firewall-applet fixes
  - New --remove-rules commands for firewall-cmd and removeRules methods for D-Bus
  - Fixed FirewallDirect.get_rules to return proper list
  - Fixed LastUpdatedOrderedDict.keys()
  - Enable rich rule usage in trusted zone (RHBZ#994144)
  - New error codes: INVALID_CONTEXT, INVALID_COMMAND, INVALID_USER and INVALID_UID


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-1
changelog:
  - rebase to 0.3.9 version:
  - translation updates
  - New IPv6_rpfilter setting to enable source address validation (RHBZ#847707)
  - Do not mix original and customized zones in case of target changes,
    apply only used zones
  - firewall-cmd: fix --*_lockdown_whitelist_uid to work with uid 0
  - Don't show main window maximized. (RHBZ#1046811)
  - Use rmmod instead of 'modprobe -r' (RHBZ#1031102)
  - Deprecate 'enabled' attribute of 'masquerade' element
  - firewall-config: new zone was added twice to the list
  - firewalld.dbus(5)
  - Enable python shebang fix again
  - firewall/client: handle_exceptions: Use loop in decorator
  - firewall-offline-cmd: Do not mask firewalld service with disabled option
  - firewall-config: richRuleDialogActionRejectType Entry -> ComboBox
  - Rich_Rule: fix parsing of reject element (RHBZ#1027373)
  - Show combined zones in permanent configuration (RHBZ#1002016)
  - firewall-cmd(1): document exit code 2 and colored output (RHBZ#1028507)
  - firewall-config: fix RHBZ#1028853


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-2
changelog:
  - fixed rich rules (RHBZ#1054270)
  - fixed small defects in firewall-cmd and firewall-config (RHBZ#1054289)


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-4
changelog:
  - firewall-config creates unloadable config; port forwarding broken
    (RHBZ#1057628)
  - Network connection is lost after changing Zones Default Target to DROP
    (RHBZ#1057629)
  - permanently adding rich rule with audit creates unloadable config XML
    (RHBZ#1057684)
  - firewalld input_zones has default rule for public zone (RHBZ#1058339)
  - firewall-cmd is not able to add and remove zones, services and icmptypes
    (RHBZ#1064386)
  - firewall-config leaves deleted services shown if they were in use
    (RHBZ#1058853)
  - firewall-cmd does not allow user to change zone default target (RHBZ#1058791)
  - firewall-cmd man page has a typo in --help description (RHBZ#1064401)


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-5
changelog:
  - fixed rich language log level (RHBZ#993740)
  - firewall-config: use simple tool to change zones for connections (RHBZ#993782)
  - translations update (RHBZ#1030330)
  - firewall-config: fixed service and icmptype name dulications (RHBZ#1067639)
  - allow router advertisements for IPv6 rpfilter (RHBZ#1067652)
  - firewall-applet: allow to bind connections to the defaut zone (RHBZ#1068148)


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-8
changelog:
  - fixed GUI missing name of active zone (RHBZ#993655)
  - recreate man pages at build time (RHBZ#1071303)
    - fixes rich language log level (RHBZ#993740)
    - fixes typo in firewall-cmd man page (RHBZ#1064401)
  - new support to save runtime as permanent (RHBZ#993650)
  - new cli --timeout time specifiers support (RHBZ#994044)
  - updated translations (RHBZ#1048119) (RHBZ#1083592)
  - more descriptive error message in case of mistakes in iptables (RHBZ#1057095)
  - use apparent name for default target (RHBZ#1075675)
  - simplified firewalld usage on servers by dropping at_console (RHBZ#1097765)
  - fixed enable/disable of lockdown (RHBZ#1111573)
  - new Satellite 6 service (RHBZ#1135634)
  - fixed inconsistent color usage for firewall-cmd messages (RHBZ#1097841)
  - fixed missing -Es in lockdown whitelist firewall-config command (RHBZ#1099065)
  - unified runtime and permanent D-Bus API (RHBZ#1127706)
  - fixed missing update of the connections menu in firewall-config (RHBZ#1120212)
  - better docs for interface bindings in firewalld and NetworkManager (RHBZ#1112742)
  - firewall-config: Show target REJECT (RHBZ#1058794)
  - fixed inconsistent PolicyKit domain usage in main D-Bus interface (RHBZ#1061809)


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-11
changelog:
  - added missing upstream commit 265bfe90 for (RHBZ#993650)
  - also add log message in the firewall-cmd output (RHBZ#1057095)


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-12
changelog:
  - New schema configuration file verifier (RHBZ#994479)
  - More information about interface handling with and without NetworkManager
    (RHBZ#1122739) (RHBZ#1128563)
  - Apply all rich rules for non-default targets (RHBZ#1142741)
  - New iscsi service (RHBZ#1150656)
  - New rsync service (RHBZ#1150659)
  - ipXtables: use -w or -w2 if supported (RHBZ#1161745)
  - Do not use ipv6header for protocol matching. (RHBZ#1164605)
  - Iptables does not like limit of 1/d (RHBZ#1176813)
  - Fix readdition of removed permanent direct settings (RHBZ#1182671)
  - Fix bugs found by upstream test suite (RHBZ#1183008)
  - Fix polkit auth for query and get passthroughs methods (RHBZ#1183688)
  - New vdsm service (RHBZ#1194382)
  - New freeipa services (RHBZ#1206490)
  - Add missing parts to firewall-offline-cmd man page (RHBZ#1217678)


author: Thomas Woerner <twoerner@redhat.com> - 0.3.9-13
changelog:
  - Fixed file mode of schema configuration file verifier check.sh (RHBZ#994479)
  - Include upstream testsuite in SRPM package (RHBZ#1261502)
  - Added missing ports to RH-Satellite-6 mservice (RHBZ#1254531)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.2-1
changelog:
  - Rebase to 0.4.2
  - Allows unspecifying zone binding for interfaces in firewall-config
    (RHBZ#1066037)
  - Adds improved management of zone binding for interfaces, connections and
    sources (RHBZ#1083626)
  - Adds commands to showing details of zones, services, .. (RHBZ#1147500)
  - Adds a default logging option (RHBZ#1147951)
  - Adds quiet option for firewall-offline-cmd (RHBZ#1220467)
  - Adds support for zone chain usage in direct rules (RHBZ#1136801,
    RHBZ#1336881)
  - Adds source port support in zones, services and rich rules (RHBZ#1214770)
  - Adds services imap and smtps (RHBZ#1220196)
  - Fixes runtime to permanent migration(RHBZ#1237242)
  - Fixes removal of destination addresses for services in permanent view in
    firewall-config (RHBZ#1278281)
  - Fixes firewall-config usage over ssh (RHBZ#1281416)
  - Fixes reload disconnects with existing connections (RHBZ#1287449)
  - Fixes ICMP packet drops while reloading (RHBZ#1288177)
  - Adds option to add a new zone, service, .. from existing file (RHBZ#1292926)
  - Adds improved checks for file readers, fixes error reporting of strings
    containing illegal characters (RHBZ#1303026)
  - Transforms direct.passthrough errors into warnings (RHBZ#1301573)
  - Reduced getprotobyname and getservbyname calls for NIS use (RHBZ#1305434)
  - Fixes (repeated) firewalld reload by sending SIGHUP signal (RHBZ#1313023)
  - Adds After=dbus.service to service file to fix shutdown (RHBZ#1313845)
  - Adds ICMP block inversion support (RHBZ#1325335)
  - Fixes local traffic issue with masquerading in default zone (RHBZ#1326130)
  - Adds destination rich rules without an element (RHBZ#1326462)
  - Fixes reload after default zone change to newly introduced zone (RHBZ#1273888)
  - Fixes start without ipv6_rpfilter module (RHBZ#1285769)
  - Adds log of denied packets option (RHBZ#1322505)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3-1
changelog:
  - Rebase to 0.4.3
  - Rebase to the new upstream and new release (RHBZ#1302802)
  - New firewallctl command line utility (RHBZ#1147959)
  - Adds radius TCP ports (RHBZ#1219717)
  - XSD enhancements for conflicting tag specification (RHBZ#1296573)
  - Adds port for corosync-qnetd to high-availability service (RHBZ#1347530)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.1-1
changelog:
  - Rebase to 0.4.3.1
  - firewall.command: Fix python3 DBusException message not interable error
  - src/Makefile.am: Fix path in firewall-[offline-]cmd_test.sh while installing
  - firewallctl: Do not trace back on list command without further arguments
  - firewallctl (man1): Added remaining sections zone, service, ..
  - firewallctl: Added runtime-to-permanent, interface and source parser,
    IndividualCalls setting
  - firewall.server.config: Allow to set IndividualCalls property in config
    interface
  - Fix missing icmp rules for some zones
  - runProg: Fix issue with running programs
  - firewall-offline-cmd: Fix issues with missing system-config-firewall
  - firewall.core.ipXtables: Split up source and dest addresses for transaction
  - firewall.server.config: Log error in case of loading malformed files in
    watcher
  - Install and package the firewallctl man page


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-1
changelog:
  - Rebase to 0.4.3.2
  - Fix regression with unavailable optional commands
  - All missing backend messages should be warnings
  - Individual calls for missing restore commands
  - Only one authenticate call for add and remove options and also sequences
  - RH-Satellite-6 service now upstream
  - Conflict for selinux-policy needed to be updated to newer release
    (RHBZ#1304723)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-2
changelog:
  - Updated conflict for selinux-policy (RHBZ#1304723)
  - Fixed exit codes in command line clients (RHBZ#1357050)
  - Fixed traceback in firewall-cmd without args (RHBZ#1357063)
  - Fixed source docs in man pages and help output (RHBZ#1357888)
  - Fixed rebuild of changed man pages (RHBZ#1360362)
  - Use stderr for errors and warnings in command line tools (RHBZ#1360894)
  - Fixed lockdown not denying invalid commands (RHBZ#1360871)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-3
changelog:
  - Fix test suite for command change (RHBZ#1360871)
  - Fix test suite with stderr usage (RHBZ#1360894)
  - Rebuild for wrong docdir without version (RHBZ#1057327#c7)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-4
changelog:
  - Fixed firewall-config gettext usage (RHBZ#1361612)
  - Fixed ifcfg file reader and writer (RHBZ#1362171)
  - Fixed loading ipset entries from file in commands (RHBZ#1365198)
  - Added conflicts to old main package to sub packages (RHBZ#1361669)
  - Do not show settings of zones etc. without authentication (RHBZ#1357098)
  - Fixed CVE-2016-5410 (RHBZ#1359296)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-5
changelog:
  - Print errors and warnings to stderr additional patch (RHBZ#1360894)
  - Fixed trace back in firewallctl (RHBZ#1367155)
  - Fix client crash if systembus can not be aquired (RHBZ#1367038)
  - Make ALREADY_ENABLED a warning (RHBZ#1366654)
  - Added conflict to old squid package providing the squid.service file
    (RHBZ#1366308)
  - Fixed firewall-cmd help typo (RHBZ#1367171)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-6
changelog:
  - Do not use exit code 254 for {ALREADY,NOT}_ENABLED sequences (RHBZ#1366654)
  - Fail with NOT_AUTHORIZED if authorization fails (RHBZ#1368549)
  - firewall-cmd: Fix get and set description for permanent zones (RHBZ#1368949)
  - Fix loading of service helpers in active zones (RHBZ#1371116)


author: Thomas Woerner <twoerner@redhat.com> - 0.4.3.2-7
changelog:
  - Tolerate ipv6_rpfilter fail (RHBZ#1285769)
  - Fix set_rules to copy the rule before extracting the table (RHBZ#1373260)
  - Translation update (RHBZ#1273296)
  - Conflict with NetworkManager < 1:1.4.0-3.el7 (RHBZ#1366288)


author: Thomas Woerner <twoerner@redhat.com>
changelog:
  - removed la files, removed devel package
  - split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
      freeradius-unixODBC
  - fixed requires and buildrequires
  - create logging dir in post if it does not exist
  - fixed module load without la files


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
changelog:
  - modify default PAM configuration to remove the directory part of the module
    name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
    multilib systems will always load the right module for the architecture
  - modify default PAM configuration to use pam_stack


author: Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
changelog:
  - added buildrequires for zlib-devel (#127162)
  - fixed libdir patch to prefer own libeap instead of installed one (#127168)
  - fixed samba account maps in LDAP for samba v3 (#127173)


author: Thomas Woerner <twoerner@redhat.com> 1.0.4-2
changelog:
  - added missing build requires for libtool-ltdl-devel (#160877)
  - modified file list to get a report for missing plugins


author: Thomas Woerner <twoerner@redhat.com> 1.1.1-1
changelog:
  - new version 1.1.1
  - fixed incorrect rlm_sql globbing (#189095)
    Thanks to Yanko Kaneti for the fix.
  - fixed chown syntax in post script (#182777)
  - dropped gcc34, libdir and realloc-return patch
  - spec file cleanup with additional libtool build fixes


author: Karsten Hopp <karsten@redhat.com> 1.1.3-3
changelog:
  - remove trailing dot from summary
  - fix buildroot
  - fix post/postun/preun requirements
  - use rpm macros


author: Thomas Woerner <twoerner@redhat.com> 1.1.5-1
changelog:
  - new version 1.1.5
    - no /etc/raddb/otppasswd.sample anymore
    - build is pie by default, dropped pie patch
  - fixed build requirement for perl (perl-devel)


author: Thomas Woerner <twoerner@redhat.com> 1.1.6-2
changelog:
  - radiusd expects /etc/raddb to not be world readable or writable
    /etc/raddb now belongs to radiusd, post script sets permissions


author: Thomas Woerner <twoerner@redhat.com> 1.1.7-1
changelog:
  - new versin 1.1.7
  - install snmp MIB files
  - dropped LDAP_DEPRECATED flag, it is upstream
  - marked config files for sub packages as config (rhbz#240400)
  - moved db files to /var/lib/raddb (rhbz#199082)


author: <jdennis@redhat.com> - 1.1.7-3.3.ipa
changelog:
  - add support in rlm_ldap for reading clients from ldap
  - fix TLS parameter controling if a cert which fails to validate
    will be accepted (i.e. self-signed),
    rlm_ldap config parameter=tls_require_cert
    ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
    ldap_set_option() when it should have been ldap_int_tls_config()


author: John Dennis <jdennis@redhat.com> - 2.0.3-1
changelog:
  - Upgrade to current upstream 2.0.3 release
  - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
  - Resolve: bug #438665: Contains files owned by buildsystem
  - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
    to further partition external dependencies.
  - Clean up some unnecessary requires dependencies
  - Add versioned requires between subpackages


author: John Dennis <jdennis@redhat.com> - 2.0.3-2
changelog:
  - remove support for radrelay, it's different now
  - turn off default inclusion of SQL config files in radiusd.conf since SQL
    is an optional RPM install
  - remove mssql config files


author: John Dennis <jdennis@redhat.com> - 2.0.4-1
changelog:
  - upgrade to latest upstream, see Changelog for details
  - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel


author: John Dennis <jdennis@redhat.com> - 2.0.5-1
changelog:
  - upgrade to latest upstream, see Changelog for details,
    upstream now has more complete fix for bug #447545, local patch removed


author: John Dennis <jdennis@redhat.com> - 2.0.5-2
changelog:
  - Resolves: bug #453761: FreeRADIUS %post should not include chown -R
    specify file attributes for /etc/raddb/ldap.attrmap
    fix consistent use of tabs/spaces (rpmlint warning)


author: John Dennis <jdennis@redhat.com> - 2.1.1-1
changelog:
  - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
    permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770


author: John Dennis <jdennis@redhat.com> - 2.1.1-3
changelog:
  - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
  - remove diaupadmin packages, it's not well supported and there are problems with it.


author: John Dennis <jdennis@redhat.com> - 2.1.1-8
changelog:
  - add --with-system-libtool to configure as a workaround for
  undefined reference to lt__PROGRAM__LTX_preloaded_symbols


author: John Dennis <jdennis@redhat.com> - 2.1.3-1
changelog:
  - upgrade to latest upstream release, upstream summary follows:
    The focus of this release is stability.
    Feature Improvements:
      * Allow running with "user=radiusd" and binding to secure sockets.
      * Start sending Status-Server "are you alive" messages earlier, which
        helps with proxying multiple realms to a home server.
      * Removed thread pool code from rlm_perl.  It's not necessary.
      * Added example Perl configuration to raddb/modules/perl
      * Force OpenSSL to support certificates with SHA256. This seems to be
        necessary for WiMAX certs.
    Bug fixes:
      * Fix Debian patch to allow it to build.
      * Fix potential NULL dereference in debugging mode on certain
        platforms for TTLS and PEAP inner tunnels.
      * Fix uninitialized memory in handling of vendor definitions
      * Fix parsing of quoted (but non-string) attributes in the "users" file.
      * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
      * use SUN_LEN in control socket, to avoid truncation on some platforms.
      * Correct internal handling of "debug condition" to prevent it from
        being over-written.
      * Check return code of regcomp in "unlang", so that invalid regular
        expressions are caught rather than mishandled.
      * Make rlm_sql use <ltdl.h>.  Addresses bug #610.
      * Document list "type = status" better.  Closes bug #580.
      * Set "default days" for certificates, because OpenSSL won't do it.
        This closes bug #615.
      * Reference correct list in example raddb/modules/ldap. Closes #596.
      * Increase default schema size for Acct-Session-Id to 64. Closes #540.
      * Fix use of temporary files in dialup-admin.  Closes #605 and
        addresses CVE-2008-4474.
      * Addressed a number of minor issues found by Coverity.
      * Added DHCP option 150 to the dictionary.  Closes #618.


author: John Dennis <jdennis@redhat.com> - 2.1.6-1
changelog:
  - update to latest upstream release, from upstream Changelog:
    Feature improvements
      * radclient exits with 0 on successful (accept / ack), and 1
        otherwise (no response / reject)
      * Added support for %{sql:UPDATE ..}, and insert/delete
        Patch from Arran Cudbard-Bell
      * Added sample "do not respond" policy.  See raddb/policy.conf
        and raddb/sites-available/do_not_respond
      * Cleanups to Suse spec file from Norbert Wegener
      * New VSAs for Juniper from Bjorn Mork
      * Include more RFC dictionaries in the default install
      * More documentation for the WiMAX module
      * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
        This helps with Active Directory.  See raddb/modules/ldap
      * Don't load pre/post-proxy if proxying is disabled.
      * Added %{md5:...}, which returns MD5 hash in hex.
      * Added configurable "retry_interval" and "poll_interval"
        for "detail" listeners.
      * Added "delete_mppe_keys" configuration option to rlm_wimax.
        Apparently some WiMAX clients misbehave when they see those keys.
      * Added experimental rlm_ruby from
        http://github.com/Antti/freeradius-server/tree/master
      * Add Tunnel attributes to ldap.attrmap
      * Enable virtual servers to be reloaded on HUP.  For now, only
        the "authorize", "authenticate", etc. processing sections are
        reloaded.  Clients and "listen" sections are NOT reloaded.
      * Updated "radwatch" script to be more robust.  See scripts/radwatch
      * Added certificate compatibility notes in raddb/certs/README,
        for compatibility with different operating systems. (i.e. Windows)
      * Permit multiple "-e" in radmin.
      * Add support for originating CoA-Request and Disconnect-Request.
        See raddb/sites-available/originate-coa.
      * Added "lifetime" and "max_queries" to raddb/sql.conf.
        This helps address the problem of hung SQL sockets.
      * Allow packets to be injected via radmin.  See "inject help"
        in radmin.
      * Answer VMPS reconfirmation request.  Patch from Hermann Lauer.
      * Sample logrotate script in scripts/logrotate.freeradius
      * Add configurable poll interval for "detail" listeners
      * New "raddebug" command.  This prints debugging information from
        a running server.  See "man raddebug.
      * Add "require_message_authenticator" configuration to home_server
        configuration.  This makes the server add Message-Authenticator
        to all outgoing Access-Request packets.
      * Added smsotp module, as contributed by Siemens.
      * Enabled the administration socket in the default install.
        See raddb/sites-available/control-socket, and "man radmin"
      * Handle duplicate clients, such as with replicated or
        load-balanced SQL servers and "readclients = yes"
    Bug fixes
      * Minor changes to allow building without VQP.
      * Minor fixes from John Center
      * Fixed raddebug example
      * Don't crash when deleting attributes via unlang
      * Be friendlier to very fast clients
      * Updated the "detail" listener so that it only polls once,
        and not many times in a row, leaking memory each time...
      * Update comparison for Packet-Src-IP-Address (etc.) so that
        the operators other than '==' work.
      * Did autoconf magic to work around weird libtool bug
      * Make rlm_perl keep tags for tagged attributes in more situations
      * Update UID checking for radmin
      * Added "include_length" field for TTLS.  It's needed for RFC
        compliance, but not (apparently) for interoperability.
      * Clean up control sockets when they are closed, so that we don't
        leak memory.
      * Define SUN_LEN for systems that don't have it.
      * Correct some boundary conditions in the conditional checker ("if")
        in "unlang".  Bug noted by Arran Cudbard-Bell.
      * Work around minor building issues in gmake.  This should only
        have affected developers.
      * Change how we manage unprivileged user/group, so that we do not
        create control sockets owned by root.
      * Fixed more minor issues found by Coverity.
      * Allow raddb/certs/bootstrap to run when there is no "make"
        command installed.
      * In radiusd.conf, run_dir depends on the name of the program,
        and isn't hard-coded to "..../radiusd"
      * Check for EOF in more places in the "detail" file reader.
      * Added Freeswitch dictionary.
      * Chop ethernet frames in VMPS, rather than droppping packets.
      * Fix EAP-TLS bug.  Patch from Arnaud Ebalard
      * Don't lose string for regex-compares in the "users" file.
      * Expose more functions in rlm_sql to rlm_sqlippool, which
        helps on systems where RTLD_GLOBAL is off.
      * Fix typos in MySQL schemas for ippools.
      * Remove macro that was causing build issues on some platforms.
      * Fixed issues with dead home servers.  Bug noted by Chris Moules.
      * Fixed "access after free" with some dynamic clients.

  - fix packaging bug, some directories missing execute permission
    /etc/raddb/dictionary now readable by all.


author: John Dennis <jdennis@redhat.com> - 2.1.7-1
changelog:
  - enable building of the rlm_wimax module
  - pcap wire analysis support is enabled and available in utils subpackage
  - Resolves bug #523053 radtest manpage in wrong package
  - update to latest upstream release, from upstream Changelog:
    Feature improvements
      * Full support for CoA and Disconnect packets as per RFC 3576
        and RFC 5176.  Both receiving and proxying CoA is supported.
      * Added "src_ipaddr" configuration to "home_server".  See
        proxy.conf for details.
      * radsniff now accepts -I, to read from a filename instead of
        a device.
      * radsniff also prints matching requests and any responses to those
        requests when '-r' is used.
      * Added example of attr_filter for Access-Challenge packets
      * Added support for udpfromto in DHCP code
      * radmin can now selectively mark modules alive/dead.
        See "set module state".
      * Added customizable messages on login success/fail.
        See msg_goodpass && msg_badpass in log{} section of radiusd.conf
      * Document "chase_referrals" and "rebind" in raddb/modules/ldap
      * Preliminary implementation of DHCP relay.
      * Made thread pool section optional.  If it doesn't exist,
        the server will run single-threaded.
      * Added sample radrelay.conf for people upgrading from 1.x
      * Made proxying more stable by failing over, rather than
        rejecting the first request.  See "response_window" in proxy.conf
      * Allow home_server_pools to exist without realms.
      * Add dictionary.iea (closes bug #7)
      * Added support for RFC 5580
      * Added experimental sql_freetds module from Gabriel Blanchard.
      * Updated dictionary.foundry
      * Added sample configuration for MySQL cluster in raddb/sql/ndb
        See the README file for explanations.
    Bug fixes
      * Fixed corner case where proxied packets could have extra
        character in User-Password attribute.  Fix from Niko Tyni.
      * Extended size of "attribute" field in SQL to 64.
      * Fixes to ruby module to be more careful about when it builds.
      * Updated Perl module "configure" script to check for broken
        Perl installations.
      * Fix "status_check = none".  It would still send packets
        in some cases.
      * Set recursive flag on the proxy mutex, which enables safer
        cleanup on some platforms.
      * Copy the EAP username verbatim, rather than escaping it.
      * Update handling so that robust-proxy-accounting works when
        all home servers are down for extended periods of time.
      * Look for DHCP option 53 anywhere in the packet, not just
        at the start.
      * Fix processing of proxy fail handler with virtual servers.
      * DHCP code now prints out correct src/dst IP addresses
        when sending packets.
      * Removed requirement for DHCP to have clients
      * Fixed handling of DHCP packets with message-type buried in the packet
      * Fixed corner case with negation in unlang.
      * Minor fixes to default MySQL & PostgreSQL schemas
      * Suppress MSCHAP complaints in debugging mode.
      * Fix SQL module for multiple instance, and possible crash on HUP
      * Fix permissions for radius.log for sites that change user/group,
        but which don't create the file before starting radiusd.
      * Fix double counting of packets when proxying
      * Make %l work
      * Fix pthread keys in rlm_perl
      * Log reasons for EAP failure (closes bug #8)
      * Load home servers and pools that aren't referenced from a realm.
      * Handle return codes from virtual attributes in "unlang"
        (e.g. LDAP-Group).  This makes "!(expr)" work for them.
      * Enable VMPS to see contents of virtual server again
      * Fix WiMAX module to be consistent with examples.  (closes bug #10)
      * Fixed crash with policies dependent on NAS-Port comparisons
      * Allowed vendor IDs to be be higher than 32767.
      * Fix crash on startup with certain regexes in "hints" file.
      * Fix crash in attr_filter module when packets don't exist
      * Allow detail file reader to be faster when "load_factor = 100"
      * Add work-around for build failures with errors related to
        lt__PROGRAM__LTX_preloaded_symbols.  libltdl / libtool are horrible.
      * Made ldap module "rebind" option aware of older, incompatible
        versions of OpenLDAP.
      * Check value of Fall-Through in attr_filter module.


author: John Dennis <jdennis@redhat.com> - 2.1.7-3
changelog:
  - resolves: bug #522111 non-conformant initscript
    also change permission of /var/run/radiusd from 0700 to 0755
    so that "service radiusd status" can be run as non-root


author: John Dennis <jdennis@redhat.com> - 2.1.7-6
changelog:
  - more spec file clean up from review comments
  - remove freeradius-libs subpackage, move libfreeradius-eap and
    libfreeradius-radius into the main package
  - fix subpackage requires, change from freeradius-libs to main package
  - fix description of the devel subpackage, remove referene to non-shipped libs
  - remove execute permissions on src files included in debuginfo
  - remove unnecessary use of ldconfig
  - since all sub-packages now require main package remove user creation for sub-packages
  - also include the LGPL library license file in addition to the GPL license file
  - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6


author: John Dennis <jdennis@redhat.com> - 2.1.7-7
changelog:
  - Remove devel subpackage. It doesn't make much sense to have a devel package since
    we don't ship libraries and it produces multilib conflicts.


author: John Dennis <jdennis@redhat.com> - 2.1.8-1
changelog:
  - update to latest upstream
    Feature improvements
    * Print more descriptive error message for too many EAP sessions.
      This gives hints on what to do when "failed to store handler"
    * Commands received from radmin are now printed on stdout when
      in debugging mode.
    * Allow accounting packets to be written to a detail file, even
      if they were read from a different detail file.
    * Added OpenSSL license exception (src/LICENSE.openssl)

    Bug fixes
    * DHCP sockets can now set the broadcast flag before binding to a
      socket.  You need to set "broadcast = yes" in the DHCP listener.
    * Be more restrictive on string parsing in the config files
    * Fix password length in scripts/create-users.pl
    * Be more flexible about parsing the detail file.  This allows
      it to read files where the attributes have been edited.
    * Ensure that requests read from the detail file are cleaned up
      (i.e. don't leak) if they are proxied without a response.
    * Write the PID file after opening sockets, not before
      (closes bug #29)
    * Proxying large numbers of packets no longer gives error
      "unable to open proxy socket".
    * Avoid mutex locks in libc after fork
    * Retry packet from detail file if there was no response.
    * Allow old-style dictionary formats, where the vendor name is the
      last field in an ATTRIBUTE definition.
    * Removed all recursive use of mutexes.  Some systems just don't
      support this.
    * Allow !* to work as documented.
    * make templates work (see templates.conf)
    * Enabled "allow_core_dumps" to work again
    * Print better errors when reading invalid dictionaries
    * Sign client certificates with CA, rather than server certs.
    * Fix potential crash in rlm_passwd when file was closed
    * Fixed corner cases in conditional dynamic expansion.
    * Use InnoDB for MySQL IP Pools, to gain transactional support
    * Apply patch to libltdl for CVE-2009-3736.
    * Fixed a few issues found by LLVM's static checker
    * Keep track of "bad authenticators" for accounting packets
    * Keep track of "dropped packets" for auth/acct packets
    * Synced the "debian" directory with upstream
    * Made "unlang" use unsigned 32-bit integers, to match the
      dictionaries.


author: John Dennis <jdennis@redhat.com> - 2.1.8-2
changelog:
  - resolves: bug #526559 initial install should run bootstrap to create certificates
    running radiusd in debug mode to generate inital temporary certificates
    is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
    rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
  - resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
    the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
    were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months


author: John Dennis <jdennis@redhat.com> - 2.1.9-1
changelog:
  - update to latest upstream, mainly bug fix release
    Feature improvements
    * Add radmin command "stats detail <file>" to see what
      is going on inside of a detail file reader.
    * Added documentation for CoA.  See raddb/sites-available/coa
    * Add sub-option support for Option 82.  See dictionary.dhcp
    * Add "server" field to default SQL NAS table, and documented it.

    Bug fixes
    * Reset "received ping" counter for Status-Server checks.  In some
      corner cases it was not getting reset.
    * Handle large VMPS attributes.
    * Count accounting responses from a home server in SNMP / statistics
      code.
    * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
    * radmin packet counter statistics are now unsigned, for numbers
      2^31..2^32.  After that they roll over to zero.
    * Be more careful about expanding data in PAP and MS-CHAP modules.
      This prevents login failures when passwords contain '{'.
    * Clean up zombie children if there were many "exec" modules being
      run for one packet, all with "wait = no".
    * re-open log file after HUP.  Closes bug #63.
    * Fix "no response to proxied packet" complaint for Coa / Disconnect
      packets.  It shouldn't ignore replies to packets it sent.
    * Calculate IPv6 netmasks correctly.  Closes bug #69.
    * Fix SQL module to re-open sockets if they unexpectedly close.
    * Track scope for IPv6 addresses.  This lets us use link-local
      addresses properly.  Closes bug #70.
    * Updated Makefiles to no longer use the shell for recursing into
      subdirs.  "make -j 2" should now work.
    * Updated raddb/sql/mysql/ippool.conf to use "= NULL".  Closes
      bug #75.
    * Updated Makefiles so that "make reconfig" no longer uses the shell
      for recursing into subdirs, and re-builds all "configure" files.
    * Used above method to regenerate all configure scripts.
      Closes bug #34.
    * Updated SQL module to allow "server" field of "nas" table
      to be blank: "".  This means the same as it being NULL.
    * Fixed regex realm example.  Create Realm attribute with value
      of realm from User-Name, not from regex.  Closes bug #40.
    * If processing a DHCP Discover returns "fail / reject", ignore
      the packet rather than sending a NAK.
    * Allow '%' to be escaped in sqlcounter module.
    * Fix typo internal hash table.
    * For PEAP and TTLS, the tunneled reply is added to the reply,
      rather than integrated via the operators.  This allows multiple
      VSAs to be added, where they would previously be discarded.
    * Make request number unsigned.  This changes nothing other than
      the debug output when the server receives more than 2^31 packets.
    * Don't block when reading child output in 'exec wait'.  This means
      that blocked children get killed, instead of blocking the server.
    * Enabled building without any proxy functionality
    * radclient now prefers IPv4, to match the default server config.
    * Print useful error when a realm regex is invalid
    * relaxed rules for preprocess module "with_cisco_vsa_hack".  The
      attributes can now be integer, ipaddr, etc.  (i.e. non-string)
    * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
      2 arguments.
    * Update configure script for rlm_python to avoid dynamic linking
      problems on some platforms.
    * Work-around for bug #35
    * Do suid to "user" when running in debug mode as root
    * Make "allow_core_dumps" work in more situations.
    * In detail file reader, treat bad records as EOF.
      This allows it to continue working when the disk is full.
    * Fix Oracle default accounting queries to work when there are no
      gigawords attributes.  Other databases already had the fix.
    * Fix rlm_sql to show when it opens and closes sockets.  It already
      says when it cannot connect, so it should say when it can connect.
    * "chmod -x" for a few C source files.
    * Pull update spec files, etc. from RedHat into the redhat/ directory.
    * Allow spaces when parsing integer values.  This helps people who
      put "too much" into an SQL value field.


author: John Dennis <jdennis@redhat.com> - 2.1.10-1
changelog:
  Feature improvements
    * Install the "radcrypt" program.
    * Enable radclient to send requests containing MS-CHAPv1
      Send packets with: MS-CHAP-Password = "password".  It will
      be automatically converted to the correct MS-CHAP attributes.
    * Added "-t" command-line option to radtest.  You can use "-t pap",
     "-t chap", "-t mschap", or "-t eap-md5".  The default is "-t pap"
    * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
      This change and the previous one makes PEAP testing much easier.
    * Added more documentation and examples for the "passwd" module.
    * Added dictionaries for RFC 5607 and RFC 5904.
    * Added note in proxy.conf that we recommend setting
      "require_message_authenticator = yes" for all home servers.
    * Added example of second "files" configuration, with documentation.
      This shows how and where to use two instances of a module.
    * Updated radsniff to have it write pcap files, too.  See '-w'.
    * Print out large WARNING message if we send an Access-Challenge
      for EAP, and receive no follow-up messages from the client.
    * Added Cached-Session-Policy for EAP session resumption.  See
      raddb/eap.conf.
    * Added support for TLS-Cert-* attributes. For details, see
      raddb/sites-available/default, "post-auth" section.
    * Added sample raddb/modules/{opendirectory,dynamic_clients}
    * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
    * Added RFCs 5607, 5904, and 5997.
    * For EAP-TLS, client certificates can now be validated using an
      external command.  See eap.conf, "validate" subsection of "tls".
    * Made rlm_pap aware of {nthash} prefix, for compatibility with
      legacy RADIUS systems.
    * Add Module-Failure-Message for mschap module (ntlm_auth)
    * made rlm_sql_sqlite database configurable.  Use "filename"
      in sql{} section.
    * Added %{tolower: ...string ... }, which returns the lowercase
      version of the string.  Also added %{toupper: ... } for uppercase.

    Bug fixes
    * Fix endless loop when there are multiple sub-options for
      DHCP option 82.
    * More debug output when sending / receiving DHCP packets.
    * EAP-MSCHAPv2 should return the MPPE keys when used outside
      of a TLS tunnel.  This is needed for IKE.
    * Added SSL "no ticket" option to prevent SSL from creating sessions
      without IDs.  We need the IDs, so this option should be set.
    * Fix proxying of packets from inside a TTLS/PEAP tunnel.
      Closes bug #25.
    * Allow IPv6 address attributes to be created from domain names
      Closes bug #82.
    * Set the string length to the correct value when parsing double
      quotes.  Closes bug #88.
    * No longer look users up in /etc/passwd in the default configuration.
      This can be reverted by enabling "unix" in the "authorize" section.
    * More #ifdef's to enable building on systems without certain
      features.
    * Fixed SQL-Group comparison to register only if the group
      query is defined.
    * Fixed SQL-Group comparison to register <instance>-SQL-Group,
      just like rlm_ldap.  This lets you have multiple SQL group checks.
    * Fix scanning of octal numbers in "unlang".  Closes bug #89.
    * Be less aggressive about freeing "stuck" requests.  Closes bug #35.
    * Fix example in "originate-coa" to refer to the correct packet.
    * Change default timeout for dynamic clients to 1 hour, not 1 day.
    * Allow passwd module to map IP addresses, too.
    * Allow passwd module to be used for CoA packets
    * Put boot filename into DHCP header when DHCP-Boot-Filename
      is specified.
    * raddb/certs/Makefile no longer has certs depend on index.txt and
       serial.  Closes bug #64.
    * Ignore NULL errorcode in PostgreSQL client.  Closes bug #39
    * Made Exec-Program and Exec-Program-Wait work in accounting
      section again.  See sites-available/default.
    * Fix long-standing memory leak in esoteric conditions.  Found
      by Jerry Nichols.
    * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
      This will automatically convert more passwords.
    * Updated rlm_pap to decode Password-With-Header, if it was base64
      encoded, and to treat the contents as potentially binary data.
    * Fix Novell eDir code to use the right function parameters.
      Closes bug #86.
    * Allow spaces to be escaped when executing external programs.
      Closes bug #93.
    * Be less restrictive about checking permissions on control socket.
      If we're root, allow connecting to a non-root socket.
    * Remove control socket on normal server exit.  If the server isn't
      running, the control socket should not exist.
    * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
      calculations.  It *MAY* be different (upper / lower case) from
      the User-Name attribute.  Closes bug #17.
    * If the EAP-TLS methods have problems, more SSL errors are now
      available in the Module-Failure-Message attribute.
    * Update Oracle configure scripts.  Closes bug #57.
    * Added text to DESC fields of doc/examples/openldap.schema
    * Updated more documentation to use "Restructured Text" format.
      Thanks to James Lockie.
    * Fixed typos in raddb/sql/mssql/dialup.conf.  Closes bug #11.
    * Return error for potential proxy loops when using "-XC"
    * Produce better error messages when slow databases block
      the server.
    * Added notes on DHCP broadcast packets for FreeBSD.
    * Fixed crash when parsing some date strings.  Closes bug #98
    * Improperly formatted Attributes are now printed as "Attr-##".
      If they are not correct, they should not use the dictionary name.
    * Fix rlm_digest to be check the format of the Digest attributes,
      and return "noop" rather than "fail" if they're not right.
    * Enable "digest" in raddb/sites-available/default.  This change
      enables digest authentication to work "out of the box".
    * Be less aggressive about marking home servers as zombie.
      If they are responding to some packets, they are still alive.
    * Added Packet-Transmit-Counter, to track detail file retransmits.
      Closes bug #13.
    * Added configure check for lt_dladvise_init().  If it exists, then
      using it solves some issues related to libraries loading libraries.
    * Added indexes to the MySQL IP Pool schema.
    * Print WARNING message if too many attributes are put into a packet.
    * Include dhcp test client (not built by default)
    * Added checks for LDAP constraint violation.  Closes bug #18.
    * Change default raddebug timeout to 60 seconds.
    * Made error / warning messages more consistent.
    * Correct back-slash handling in variable expansion.  Closes bug #46.
      You SHOULD check your configuration for backslash expansion!
    * Fix typo in "configure" script (--enable-libltdl-install)
    * Use local libltdl in more situations.  This helps to avoid
      compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
    * Fix hang on startup when multiple home servers were defined
      with "src_ipaddr" field.
    * Fix 32/64 bit issue in rlm_ldap.  Closes bug #105.
    * If the first "listen" section defines 127.0.0.1, don't use that
      as a source IP for proxying.  It won't work.
    * When Proxy-To-Realm is set to a non-existent realm, the EAP module
      should handle the request, rather than expecting it to be proxied.
    * Fix IPv4 issues with udpfromto.  Closes bug #110.
    * Clean up child processes of raddebug.  Closes bugs #108 and #109
    * retry OTP if the OTP daemon fails.  Closes bug #58.
    * Multiple calls to ber_printf seem to work better.  Closes #106.
    * Fix "unlang" so that "attribute not found" is treated as a "false"
      comparison, rather than a syntax error in the configuration.
    * Fix issue with "Group" attribute.


author: John Dennis <jdennis@redhat.com> - 2.1.10-3
changelog:
  - bug 666589 - removing freeradius from system does not delete the user "radiusd"
    fix scriptlet argument testing, simplify always exiting with zero


author: John Dennis <jdennis@redhat.com> - 2.1.10-7
changelog:
  - Resolves: #689045 Using rlm_perl cause radiusd failed to start
    Fix configure typo which caused lt_dladvise_* functions to be skipped.
    run autogen.sh because HAVE_LT_DLADVISE_INIT isn't in src/main/autogen.h
    Implemented by: freeradius-lt-dladvise.patch


author: John Dennis <jdennis@redhat.com> - 2.1.11-1
changelog:
  - Upgrade to latest upstream release: 2.1.11
  - Remove the following two patches as upstream has incorporated them:
      freeradius-radtest-ipv6.patch
      freeradius-lt-dladvise.patch
  - Upstream changelog for 2.1.11:
    Feature improvements
    * Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines.
      All vendors need to read it and follow its directions.
    * Microsoft SoH support for PEAP from Phil Mayers.
      See doc/SoH.txt
    * Certificate "bootstrap" script now checks for certificate expiry.
      See comments in raddb/eap.conf, and then "make_cert_command".
    * Support for dynamic expansion of EAP-GTC challenges.
      Patch from Alexander Clouter.
    * OCSP support from Alex Bergmann.  See raddb/eap.conf, "ocsp"
      section.
    * Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3.
    * Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna.
    * Experimental redis support from Gabriel Blanchard.
      See raddb/modules/redis and raddb/modules/rediswho
    * Add "key" to rlm_fastusers.  Closes bug #126.
    * Added scripts/radtee from original software at
      http://horde.net/~jwm/software/misc/comparison-tee
    * Updated radmin "man" page for new commands.
    * radsniff now prints the hex decoding of the packet (-x -x -x)
    * mschap module now reloads its configuration on HUP
    * Added experimental "replicate" module.  See raddb/modules/replicate
    * Policy "foo" can now refer to module "foo".  This lets you
      over-ride the behavior of a module.
    * Policy "foo.authorize" can now over-ride the behavior of module
      "foo", "authorize" method.
    * Produce errors in more situations when the configuration files
      have invalid syntax.

    Bug fixes
    * Ignore pre/post-proxy sections if proxying is disabled
    * Add configure checks for pcap_fopen*.
    * Fix call to otp_write in rlm_otp
    * Fix issue with Access-Challenge checking from 2.1.10, when the
      debug flag was set after server startup.  Closes #116 and #117.
    * Fix typo in zombie period start time.
    * Fix leak in src/main/valuepair.c.  Patch from James Ballantine.
    * Allow radtest to use spaces in shared secret.
      Patch from Cedric Carree.
    * Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak.
      Patch from James Ballantine.
    * Remove MN-FA key generation.  The NAS does this, not AAA.
      Patch from Ben Weichman.
    * Include dictionary.mikrotik by default.  Closes bug #121.
    * Add group membership query to MS-SQL examples.  Closes bug #120.
    * Don't cast NAS-Port to integer in Postgresql queries.
      Closes bug #112.
    * Fixes for libtool and autoconf from Sam Hartman.
    * radsniff should read the dictionaries in more situations.
    * Use fnmatch to check for detail file reader==writer.
      Closes bug #128.
    * Check for short writes (i.e. disk full) in rlm_detail.
      Closes bug #130.  Patches and testing from John Morrissey.
    * Fix typo in src/lib/token.c.  Closes bug #124
    * Allow workstation trust accounts to use MS-CHAP.
      Closes bug #123.
    * Assigning foo=`/bin/echo hello` now produces a syntax error
      if it is done outside of an "update" section.
    * Fix "too many open file descriptors" problem when using
      "verify client" in eap.conf.
    * Many fixes to dialup_admin for PHP5, by Stefan Winter.
    * Allow preprocess module to have "hints = " and "huntgroups =",
      which allows them to be empty or non-existent.
    * Renamed "php3" files to "php" in dialup_admin/
    * Produce error when sub-TLVs are used in a dictionary.  They are
      supported only in the "master" branch, and not in 2.1.x.
    * Minor fix in dictionary.redback.  Closes bug #138.
    * Fixed MySQL "NULL" issues in ippool.conf.  Closes bug #129.
    * Fix to Access-Challenge warning from Ken-ichirou Matsuzawa.
      Closes bug #118.
    * DHCP fixes to send unicast packets in more situations.
    * Fix to udpfromto, to enable it to work on IPv6 networks.
    * Fixes to the Oracle accounting_onoff_query.
    * When using both IPv4 and IPv6 home servers, ensure that we use the
      correct local socket for proxying.  Closes bug #143.
    * Suppress messages when thread pool is nearly full, all threads
      are busy, and we can't create new threads.
    * IPv6 is now enabled for udpfromto.  Closes bug #141
    * Make sqlippool query buffer the same size as sql module.
      Closes bug #139.
    * Make Coa / Disconnect proxying work again.
    * Configure scripts for rlm_caching from Nathaniel McCallum
    * src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL.
    * Updated password routines to use time-insensitive comparisons.
      This prevents timing attacks (though none are known).
    * Allow sqlite module to do normal SELECT queries.
    * rlm_wimax now has a configure script
    * Moved Ascend, USR, and Motorola "illegal" dictionaries to separate
      files.  See share/dictionary for explanations.
    * Check for duplicate module definitions in the modules{} section,
      and refuse to start if duplicates are found.
    * Check for duplicate virtual servers, and refuse to start if
      duplicates are found.
    * Don't use udpfromto if source is INADDR_ANY.  Closes bug #148.
    * Check pre-conditions before running radmin "inject file".
    * Don't over-ride "no match" with "match" for regexes.
      Closes bug #152.
    * Make retry and error message configurable in mschap.
      See raddb/modules/mschap
    * Allow EAP-MSCHAPv2 to send error message to client.  This change
      allows some clients to prompt the user for a new password.
      See raddb/eap.conf, mschapv2 section, "send_error".
    * Load the default virtual server before any others.
      This matches what users expect, and reduces confusion.
    * Fix configure checks for udpfromto.  Fixes Debian bug #606866
    * Definitive fix for bug #35, where the server could crash under
      certain loads.  Changes src/lib/packet.c to use RB trees.
    * Updated "configure" checks to allow IPv6 udpfromto on Linux.
    * SQL module now returns NOOP if the accounting start/interim/stop
      queries don't do anything.
    * Allow %{outer.control: ... } in string expansions
    * home_server coa config now matches raddb/proxy.conf
    * Never send a reply to a DHCP Release.


author: John Dennis <jdennis@redhat.com> - 2.1.12-1
changelog:
  - Upgrade to latest upstream release: 2.1.12
  - Upstream changelog for 2.1.12:
    Feature improvements
    * Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
      dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
    * Added support for PCRE from Phil Mayers
    * Configurable file permission in rlm_linelog
    * Added "relaxed" option to rlm_attr_filter.  This copies attributes
      if at least one match occurred.
    * Added documentation on dynamic clients.
      See raddb/modules/dynamic_clients.
    * Added support for elliptical curve cryptography.
      See ecdh_curve in raddb/eap.conf.
    * Added support for 802.1X MIBs in checkrad
    * Added support for %{rand:...}, which generates a uniformly
      distributed number between 0 and the number you specify.
    * Created "man" pages for all installed commands, and documented
      options for all commands.  Patch from John Dennis.
    * Allow radsniff to decode encrypted VSAs and CoA packets.
      Patch from Bjorn Mork.
    * Always send Message-Authenticator in radtest. Patch from John Dennis.
      radclient continues to be more flexible.
    * Updated Oracle schema and queries
    * Added SecurID module.  See src/modules/rlm_securid/README

    Bug fixes
    * Fix memory leak in rlm_detail
    * Fix "failed to insert event"
    * Allow virtual servers to be reloaded on HUP.
      It no longer complains about duplicate virtual servers.
    * Fix %{string:...} expansion
    * Fix "server closed socket" loop in radmin
    * Set ownership of control socket when starting up
    * Always allow root to connect to control socket, even if
      "uid" is set.  They're root.  They can already do anything.
    * Save all attributes in Access-Accept when proxying inner-tunnel
      EAP-MSCHAPv2
    * Fixes for DHCP relaying.
    * Check certificate validity when using OCSP.
    * Updated Oracle "configure" script
    * Fixed typos in dictionary.alvarion
    * WARNING on potential proxy loop.
    * Be more aggressive about clearing old requests from the
      internal queue
    * Don't open network sockets when using -C


author: John Dennis <jdennis@redhat.com> - 2.1.12-2
changelog:
  - rename /etc/tmpfiles.d/freeradius.conf to /etc/tmpfiles.d/radiusd.conf
    remove config(noreplace) because it must match files section and
    permissions differ between versions.
  - fixup macro usage for /var/run & /var/lib


author: John Dennis <jdennis@redhat.com> - 2.1.12-4
changelog:
  - resolves: bug#781744
    systemd service file incorrectly listed pid file as
    /var/run/radiusd/radiusd which it should have been
    /var/run/radiusd/radiusd.pid


author: John Dennis <jdennis@redhat.com> - 2.1.12-5
changelog:
  - resolves: bug#781877 (from RHEL5) rlm_dbm_parse man page misspelled
  - resolves: bug#760193 (from RHEL5) radtest PPPhint option is not parsed properly


author: John Dennis <jdennis@redhat.com> - 2.1.12-6
changelog:
  Fixing bugs in RHEL6 rebase, applying fixes here as well
    resolves: bug#700870 freeradius not compiled with --with-udpfromto
    resolves: bug#753764 shadow password expiration does not work
    resolves: bug#712803 radtest script is not working with eap-md5 option
    resolves: bug#690756 errors in raddb/sql/postgresql/admin.sql template


author: John Dennis <jdennis@redhat.com> - 2.2.0-0
changelog:
  - Add new patch to avoid reading .rpmnew, .rpmsave and other invalid
    files when loading config files
  - Upgrade to new 2.2.0 upstream release
  - Upstream changelog for 2.1.12:
    Feature improvements
    * 100% configuration file compatible with 2.1.x.
      The only fix needed is to disallow "hashsize=0" for rlm_passwd
    * Update Aruba, Alcatel Lucent, APC, BT, PaloAlto, Pureware,
      Redback, and Mikrotik dictionaries
    * Switch to using SHA1 for certificate digests instead of MD5.
      See raddb/certs/*.cnf
    * Added copyright statements to the dictionaries, so that we know
      when people are using them.
    * Better documentation for radrelay and detail file writer.
      See raddb/modules/radrelay and raddb/radrelay.conf
    * Added TLS-Cert-Subject-Alt-Name-Email from patch by Luke Howard
    * Added -F <file> to radwho
    * Added query timeouts to MySQL driver.  Patch from Brian De Wolf.
    * Add /etc/default/freeradius to debian package.
      Patch from Matthew Newton
    * Finalize DHCP and DHCP relay code.  It should now work everywhere.
      See raddb/sites-available/dhcp, src_ipaddr and src_interface.
    * DHCP capabilitiies are now compiled in by default.
      It runs as a DHCP server ONLY when manually enabled.
    * Added one letter expansions: %G - request minute and %I request
      ID.
    * Added script to convert ISC DHCP lease files to SQL pools.
      See scripts/isc2ippool.pl
    * Added rlm_cache to cache arbitrary attributes.
    * Added max_use to rlm_ldap to force connection to be re-established
      after a given number of queries.
    * Added configtest option to Debian init scripts, and automatic
      config test on restart.
    * Added cache config item to rlm_krb5. When set to "no" ticket
      caching is disabled which may increase performance.

    Bug fixes
    * Fix CVE-2012-3547.  All users of 2.1.10, 2.1.11, 2.1.12,
      and 802.1X should upgrade immediately.
    * Fix typo in detail file writer, to skip writing if the packet
      was read from this detail file.
    * Free cached replies when closing resumed SSL sessions.
    * Fix a number of issues found by Coverity.
    * Fix memory leak and race condition in the EAP-TLS session cache.
      Thanks to Phil Mayers for tracking down OpenSSL APIs.
    * Restrict ATTRIBUTE names to character sets that make sense.
    * Fix EAP-TLS session Id length so that OpenSSL doesn't get
      excited.
    * Fix SQL IPPool logic for non-timer attributes.  Closes bug #181
    * Change some informational messages to DEBUG rather than error.
    * Portability fixes for FreeBSD.  Closes bug #177
    * A much better fix for the _lt__PROGRAM__LTX_preloaded_symbols
      nonsense.
    * Safely handle extremely long lines in conf file variable expansion
    * Fix for Debian bug #606450
    * Mutex lock around rlm_perl Clone routines. Patch from Eike Dehling
    * The passwd module no longer permits "hashsize = 0".  Setting that
      is pointless for a host of reasons.  It will also break the server.
    * Fix proxied inner-tunnel packets sometimes having zero authentication
      vector.  Found by Brian Julin.
    * Added $(EXEEXT) to Makefiles for portability.  Closes bug #188.
    * Fix minor build issue which would cause rlm_eap to be built twice.
    * When using "status_check=request" for a home server, the username
      and password must be specified, or the server will not start.
    * EAP-SIM now calculates keys from the SIM identity, not from the
      EAP-Identity.  Changing the EAP type via NAK may result in
      identities changing.  Bug reported by Microsoft EAP team.
    * Use home server src_ipaddr when sending Status-Server packets
    * Decrypt encrypted ERX attributes in CoA packets.
    * Fix registration of internal xlat's so %{mschap:...} doesn't
      disappear after a HUP.
    * Can now reference tagged attributes in expansions.
      e.g. %{Tunnel-Type:1} and %{Tunnel-Type:1[0]} now work.
    * Correct calculation of Message-Authenticator for CoA and Disconnect
      replies.  Patch from Jouni Malinen
    * Install rad_counter, for managing rlm_counter files.
    * Add unique index constraint to all SQL flavours so that alternate
      queries work correctly.
    * The TTLS diameter decoder is now more lenient.  It ignores
      unknown attributes, instead of rejecting the TTLS session.
    * Use "globfree" in detail file reader.  Prevents very slow leak.
      Closes bug #207.
    * Operator =~ shouldn't copy the attribute, like :=.  It should
      instead behave more like ==.
    * Build main Debian package without SQL dependencies
    * Use max_queue_size in threading code
    * Update permissions in raddb/sql/postgresql/admin.sql
    * Added OpenSSL_add_all_algorithms() to fix issues where OpenSSL
      wouldn't use methods it knew about.
    * Add more sanity checks in dynamic_clients code so the server won't
      crash if it attempts to load a badly formated client definition.


author: John Dennis <jdennis@redhat.com> - 2.2.0-1
changelog:
  - resolves: bug#876564 - fails to start without freeradius-mysql
  - use upstream version of freeradius-exclude-config-file.patch


author: John Dennis <jdennis@redhat.com> - 2.2.0-3
changelog:
  - specify homedir (/var/lib/radiusd) for radiusd user in useradd,
    do not permit useradd to default the homedir.


author: John Dennis <jdennis@redhat.com> - 3.0.0-4
changelog:
  - resolves: bug#1031035
    remove radeapclient man page,
    upstream no longer supports radeapclient, use eapol_test instead
  - resolves: bug#1031061
    rlm_eap_leap memory corruption, see freeradius-rlm_leap.patch
  - move man pages for utils into utils subpackage from doc subpackage
  - fix HAVE_EC_CRYPTO test to include f20
  - add new directory /var/run/radiusd/tmp
    update mods-available/eap so tls-common.verify.tmpdir to point to it


author: John Dennis <jdennis@redhat.com> - 3.0.1-1
changelog:
  - Upgrade to upstream 3.0.1 release, full config compatible with 3.0.0.
    This is a roll-up of all upstream bugs fixes found in 3.0.0
    See upstream ChangeLog for details (in freeradius-doc subpackage)
  - resolves: bug#1052450 (fedora 1053020)
  - resolves: bug#1044748 (fedora 1044747)
  - resolves: bug#1048475 (fedora 1048474)
  - resolves: bug#1043037 (fedora 1043036)


author: John Dennis <jdennis@redhat.com> - 3.0.1-3
changelog:
  - resolves: bug#1055073 (fedora 1055072)
    rlm_ippool; bad config file attribute and fails to send reply attributes
  - resolves: bug#1055567 (fedora 1056227)
    bad mysql sql syntax
  - change CFLAGS -imacros to -include to address gcc/gdb bug 1004526
    where gdb will not display source information, only <command-line>


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.1-6
changelog:
  - Fix CVE-2014-2015 "freeradius: stack-based buffer overflow flaw in rlm_pap
    module"
  - resolves: bug#1066984 (fedora 1066763)


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-0.1.rc2
changelog:
  - Upgrade to upstream 3.0.4-rc2 release.
    See upstream ChangeLog for details (in freeradius-doc subpackage).
  - Add installation of SNMP MIB files.
  - Resolves: Bug#1036562 Missing doc page for kerberos module
  - Resolves: Bug#1099625 Default message digest defaults to sha1
  - Resolves: Bug#1109159 missing mib files in freeradius package
  - Resolves: Bug#1113010 radiusd doesn't send snmp trap when max_threads value
                          is reached
  - Resolves: Bug#1114669 Missing -P option in radtest manpage
  - Resolves: Bug#1115128 radisud can't start if proto = udp is specified
  - Resolves: Bug#1115134 radiusd aborts after 'Access-Request' when listens on
                          TCP port
  - Resolves: Bug#1115137 radiusd listens on udp port even if proto = tcp is
                          specified
  - Resolves: Bug#1126725 radiusd silently fails when start_servers is higher
                          than max_servers
  - Resolves: Bug#1135446 Radeapclient is not available


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-1
changelog:
  - Upgrade to upstream 3.0.4 release.
    See upstream ChangeLog for details (in freeradius-doc subpackage).


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-2
changelog:
  - Fix abort on home server triggers.
    Resolves: Bug#1113509 radiusd aborts when it has no proxy response with active
                          snmp traps
  - Fix segfault upon example.pl read failure.
    Resolves: Bug#1146403 radiusd segfaults when file for perl module has
                          wrong permissions
  - Fix example.pl permissions.
    Resolves: Bug#1146406 /etc/raddb/mods-config/perl/example.pl has wrong
                          permissions and radiusd fails to start
  - Fix integer handling in various cases.
    Resolves: Bug#1146441 upstream test suite fails
  - Fix dhcpclient's dictionary.dhcp loading.
    Resolves: Bug#1146939 dhcpclient lookups dictionary.dhcp file in wrong
                          location


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-3
changelog:
  - Fix a number of trigger issues.
    Resolves: Bug#1110407 radiusd doesn't send snmp trap after "radmin -e 'hup
                          files'"
    Resolves: Bug#1110414 radiusd doesn't send snmp trap when sql connection is
                          opened,closed or fail
    Resolves: Bug#1110186 radiusd doesn't send snmp trap when ldap connection
                          fails/opens/closes
    Resolves: Bug#1109164 snmp trap messages send by radiusd are inconsistent
                          and incomplete
  - Fix two omissions from radtest manpage.
    Resolves: Bug#1146898 'eap-md5' value is missing in -t option in SYNOPSIS
                          of radtest man page
    Resolves: Bug#1114669 Missing -P option in radtest manpage
  - Disable OpenSSL version checking to avoid the need to edit radiusd.conf to
    confirm heartbleed is fixed.
    Resolves: Bug#1155070 FreeRADIUS doesn't start after upgrade due to failing
                          OpenSSL version check


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-4
changelog:
  - Fix possible group info corruption/segfault in rlm_unix' fr_getgrnam.
  - Fix file configuration item parsing.


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-5
changelog:
  - Disable rlm_rest building explicitly to avoid unintended builds on some
    architectures breaking RPM build.
    Resolves: Bug#1162156
  - Add -D option support to dhcpclient.
    Related: Bug#1146939
  - Don't install rbmonkey - a test tool only useful to developers.
    Related: Bug#1146966
  - Update clients(5) man page
    Resolves: Bug#1147464


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.4-6
changelog:
  - Don't remove backslash from unknown escape sequences in LDAP values.
    Resolves: Bug#1173526
  - Improve dhcpclient and rad_counter online help.
    Resolves: Bug#1146966
  - raddb: Move trigger.conf INCLUDE before modules, making it easier to refer
    to trigger variables from module configurations.
    Resolves: Bug#1155961
  - Fix ipaddr option fallback onto ipv6.
    Resolves: Bug#1168868
  - raddb: Comment on ipaddr/ipv4addr/ipv6addr use.
    Resolves: Bug#1168247


author: Ray Strode <rstrode@redhat.com> - 3.14.2-18
changelog:
  - Fix unlock with XDMCP
    Resolves: #1315342
  - Inform remote display about session exiting when using
    XDMCP
    Resolves: #1313059


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 5.50 at last...
  - hpdj 2.6
  - Added 3rd party drivers:
    - Lexmark 5700 (lxm5700m)
    - Alps MD-* (md2k, md5k)
    - Lexmark 2050, 3200, 5700 and 7000 (lex2050, lex3200, lex5700, lex7000)


author: Michael Stefaniuc <mstefani@redhat.com>
changelog:
  - added the stp driver from the gimp-print project.
    It supports high quality printing especialy with Epson Stylus Photo.


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - merged in some patches that got away:
    * Fri Sep  1 2000 Mitsuo Hamada <mhamada@redhat.com>
    - add support JIS B size
    - fix the problem of reconverting GNUPLOT output


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - upgraded to 6.51, a major version upgrade
  - rewrote spec file, threw out some patches
  - turned on IBM's Omni print drivers interface
  - turned on HP's hpijs print drivers interface
  - turned on every driver that looked usable from linux
  - sacrificed a chicken to integrate the old Japanese drivers
  - - This didn't work. The japanese patches are turned off, pending review.
  - - I can do loops with C, but the bugs are in Postscript init files


author: Crutcher Dunnavant <crutcher@redhat.com> 6.51-2
changelog:
  - luckily, I had a spare chicken. Thanks to some work by Nakai, and one last
  - desperate search through google, everything /seems/ to be working. I know
  - that there are going to be problems in the japanese code, and I need to turn
  - on the cjk font map from adobe, but it /works/ at the moment.


author: Crutcher Dunnavant <crutcher@redhat.com> 6.51-4
changelog:
  - applied drepper@redhat.com's patch for #50300
  - fixed build deps on zlib-devel and libpng-devel, #49853
  - made gs_init.ps a config file; #25096
  - O\^/nZ the daTa directorieZ now; #50693


author: Crutcher Dunnavant <crutcher@redhat.com> 6.51-9
changelog:
  - applied IBM's glib patches for Omni, which now works.
  - BE AWARE: we now link against libstdc++ and glib for this, and use a c++
  - link stage to do the dirty.
  - added glib-devel buildreq and glib req, I don't think we require everything
  - yet, I could pull in sasl.


author: Bernhard Rosenkraenzer <bero@redhat.com> 6.52-1
changelog:
  - Updates:
    - ghostscript 6.52
    - hpdj 2.6 -> pcl3 3.3
    - CJK Patchlevel 3, adobe-cmaps 200109
    - gimp-print 4.2.0
  - Adapt patches
  - Fix various URLs
  - Begin cleaning up spec file
  - Fix bugs #21879 and #50923


author: Tim Waugh <twaugh@redhat.com> 6.52-6
changelog:
  - Fix config patch so that gs --help displays the right thing.
  - Don't ship sysvlp.sh.
  - Fix some shell scripts.
  - Ship escputil man page (bug #58919).


author: Tim Waugh <twaugh@redhat.com> 7.05-1
changelog:
  - 7.05.
  - No longer need mkstemp, vflib.fixup, quoting, or PARANOIDSAFER
    patches.
  - Don't apply CJK patches any more (no longer needed).
  - Updated Source15, Patch0, Patch10, Patch5, Patch24, Patch14, Patch12.
  - Made gdevdmpr.c compile again.
  - Move gimp-print to a separate package.
  - Ship the shared object too (and a .so file that is dlopened).
  - Update Omni patch.  No longer need Omni_path, Omni_quiet, Omni_glib patches.
  - Require Omni >= 0.6.1.
  - Add patch to fix gtk+ initial window size.
  - Add devel package with header files.
  - Turn on IJS support.
  - Update hpijs to 1.1.
  - Don't ship the hpijs binary in the ghostscript package.
  - Use -fPIC when building ijs.


author: Tim Waugh <twaugh@redhat.com> 7.05-2
changelog:
  - Don't apply bogus parts of vflib patch (bug #65268).
  - Work around Omni -sPAPERSIZE=a4 problem (bug #65269).


author: Tim Waugh <twaugh@redhat.com> 7.05-8
changelog:
  - Requires recent version of patchutils (bug #65947).
  - Don't ship broken man page symlinks (bug #66238).


author: Tim Waugh <twaugh@redhat.com> 7.05-25
changelog:
  - Fix level 1 PostScript output (bug #78450).
  - No need to carry gomni.c, since it comes from the patch.


author: Tim Waugh <twaugh@redhat.com> 7.05-26
changelog:
  - Don't ship the shared object yet (part of bug #79340).
  - Don't make the gtk package, since that needs the shared object.


author: Tim Waugh <twaugh@redhat.com> 7.05-33
changelog:
  - Add some missing font aliases (bug #73342).
  - Use the system jpeg library.
  - Update hpijs to 1.3.1.
  - Update gdevcups.c from cups-1.1.18.


author: Tim Waugh <twaugh@redhat.com> 7.05-34
changelog:
  - Apply fix for CJK font search method when the fonts are not available
    (bug #83516).
  - The gb18030 patch no longer applies here.


author: Tim Waugh <twaugh@redhat.com> 7.06-1
changelog:
  - 7.06.
  - Updated config, vflib.fixup patches.
  - No longer need dx6, jpeg patches.
  - No longer need to add in missed GNU drivers.
  - Turn off dj970 driver (hpijs drives that).


author: Tim Waugh <twaugh@redhat.com> 7.07-1
changelog:
  - 7.07.
  - Parametrize build_libgs.
  - Remove Omni requirement (bug #88177).
  - Fix ghostscript-gtk obsoletes: line (bug #88175).


author: Tim Waugh <twaugh@redhat.com> 7.07-15
changelog:
  - Build for Fedora Core 1 printer drivers update.
  - Conflicts with foomatic before hpijs 1.5 data.
  - Make fontconfig optional.


author: Tim Waugh <twaugh@redhat.com> 7.07-17
changelog:
  - Removed stp driver.  Use the IJS version (ijsgimpprint) instead.
  - No longer conflicts with foomatic for hpijs versioning.


author: Tim Waugh <twaugh@redhat.com> 7.07-19
changelog:
  - Attempt to fix gdevcups crash (bug #114256).
  - Make gs dynamically link to libgs (bug #114276).
  - Fix gdevesmv.c's misuse of const (bug #114250).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Run /sbin/ldconfig in %post/%postun.
  - Stricter requirements for the main package in the subpackages.


author: Tim Waugh <twaugh@redhat.com> 8.15-0.rc3.1
changelog:
  - Switch to ESP Ghostscript.
  - 8.15rc3.
  - Lots of patches dropped.  Perhaps some will need to be re-added.


author: Tim Waugh <twaugh@redhat.com> 8.15-0.rc3.2
changelog:
  - Drop 'Provides: libijs.so' because it is incorrect.
  - Build igcref.c with -O0 to work around bug #150771.
  - Renumber patches.


author: Tim Waugh <twaugh@redhat.com> 8.15-0.rc3.4
changelog:
  - Add Japanese fonts to FAPIcidfmap (bug #161187).
  - Moved Resource directory.
  - Added use-external-freetype patch (bug #161187).


author: Tim Waugh <twaugh@redhat.com> 8.15-0.rc3.5
changelog:
  - Split font configuration (bug #161187).
  - Reverted this change:
    - Build requires xorg-x11-devel, not XFree86-devel.


author: Tim Waugh <twaugh@redhat.com> 8.15.2-9
changelog:
  - Apply CJKV patch from svn164:165 plus the fix from svn173:174 (bug #194592,
    bug #203712, possibly bug #167596).


author: Tim Waugh <twaugh@redhat.com> 8.15.3-2
changelog:
  - 8.15.3.  No longer need gtk2, ps2epsi, badc, pagesize,
    use-external-freetype, split-font-configuration or cjkv patches.
  - Renumbered patches.


author: Tim Waugh <twaugh@redhat.com> 8.15.3-6
changelog:
  - Configure with --with-drivers=ALL since the advertised default is not
    what gets used (bug #223819).


author: Tim Waugh <twaugh@redhat.com> 8.15.3-7
changelog:
  - dvipdf script fixes (bug #88906).
  - Moved libijs.so and libgs.so into devel package (bug #203623).


author: Tim Waugh <twaugh@redhat.com> 8.15.4-3
changelog:
  - Apply fonts in CIDFnmap even if the same fontnames are already registered
    (bug #163231).
  - New file CIDFmap (bug #233966).
  - Allow local overrides for FAPIcidfmap, cidfmap and Fontmap (bug #233966).


author: Tim Waugh <twaugh@redhat.com> 8.60-0.r8112.1
changelog:
  - 8.60 snapshot from svn.  Patches dropped:
    - big-cmap-post
    - split-cidfnmap
    - exactly-enable-cidfnmap
    - Fontmap.local
    No longer needed:
    - gxcht-64bit-crash


author: Tim Waugh <twaugh@redhat.com> 8.61-2
changelog:
  - Add /usr/share/fonts to fontpath (bug #402551).
  - Restore cidfmap-switching bits, except for FAPIcidfmap which is no
    longer used.
  - Add runlibfileifexists to gs_init.ps.
  - Build with --disable-compile-inits (bug #402501).


author: Tim Waugh <twaugh@redhat.com> 8.61-9
changelog:
  - Build with jasper again (bug #433897).  Build requires jasper-devel, and
    a patch to remove jas_set_error_cb reference.


author: Tim Waugh <twaugh@redhat.com> 8.62-4
changelog:
  - Applied patch to work around bug #229174.
  - Applied patch from upstream to fix box_fill_path for shfill (bug #452348).


author: Tim Waugh <twaugh@redhat.com> 8.63-1
changelog:
  - 8.63.  No longer need r8591 or incomplete-ccittfax patches.
  - Compile without strict aliasing opts due to warnings across several
    files.
  - Don't run autogen.sh for main package, just for ijs which doesn't
    ship with a configure script.


author: Tim Waugh <twaugh@redhat.com> 8.64-6
changelog:
  - Applied patch to fix CVE-2009-0792 (bug #491853).
  - Applied patch to fix CVE-2009-0196 (bug #493379).


author: Tim Waugh <twaugh@redhat.com> 8.64-11
changelog:
  - Fixed CVE-2009-0583,0584 patch by using 255 as the maximum number of
    points, not 100, and by not treating a missing black point tag as an
    error (bug #487744).


author: Tim Waugh <twaugh@redhat.com> 8.70-1
changelog:
  - 8.70.
  - License has changed to GPLv3+.  Packages containing programs that
    link to libgs/libijs are:
    - foomatic (GPLv2+)
    - libspectre (GPLv2+)
    - ImageMagick (ImageMagick, listed on Licensing wiki page under
      "Good Licenses" and marked as GPLv3 compat)
    - gutenprint (GPLv2+)


author: Tim Waugh <twaugh@redhat.com> 8.70-3
changelog:
  - Don't ship libtool la files (bug #542674).
  - Fix debugging output from gdevcups (CVE-2009-4270, bug #540760).
  - Harden ghostscript's debugging output functions (bug #540760).


author: Tim Waugh <twaugh@redhat.com> 8.70-6
changelog:
  - Fixed pdftoraster so that it waits for its sub-process to exit.
  - Another gdevcups duplex fix from upstream revision 10631
    (bug #541604).


author: Tim Waugh <twaugh@redhat.com> 8.71-4
changelog:
  - Actually revert the upstream gdevcups changes (bug #563313).
  - Fixed pdf2dsc.ps (bug #565935).
  - Use fixed patch for LDFLAGS to make sure libgs.so gets a soname
    (bug #565935).


author: Tim Waugh <twaugh@redhat.com> 8.71-6
changelog:
  - Fixed summary.
  - Fixed macros in changelog.
  - Avoid mixed spaces and tabs.
  - Ship COPYING file.
  - Added comments for all patches.
  - More consistent macro use.


author: Tim Waugh <twaugh@redhat.com> 8.71-7
changelog:
  - Don't own the %{_datadir}/ghostscript or
    %{_datadir}/ghostscript/conf.d directories as the filesystem
    package already does (bug #569442).


author: Tim Waugh <twaugh@redhat.com> 8.71-8
changelog:
  - Restore the TIFF default strip size of 0 (bug #571520).
  - Don't segfault closing tiffg3 device if opening failed (bug #571520).
  - Don't revert gdevcups y-axis change (bug #541604).
  - Reallocate memory in gdevcups when color depth changes (bug #563313).


author: Tim Waugh <twaugh@redhat.com> 8.71-9
changelog:
  - Backported some more TIFF fixes (bug #573970).
  - Use upstream fix for TIFF default strip size (bug #571520).


author: Tim Waugh <twaugh@redhat.com> 8.71-12
changelog:
  - Change SEARCH_HERE_FIRST default to make -P- default instead of -P
    (bug #599564).
  - Removed redundant gs-executable patch (bug #502550).


author: Tim Waugh <twaugh@redhat.com> 8.71-15
changelog:
  - Restored Fontmap.local patch, incorrectly dropped after
    ghostscript-8.15.4-3 (bug #610301).
  - Applied patch to let gdevcups use automatic memory allocation.  Use
    RIPCache=auto in /etc/cups/cupsd.conf to enable.
  - Applied patch to fix NULL dereference in bbox driver (bug #591624).
  - Applied upstream patch to fix iname.c segfault (bug #465311).


author: Tim Waugh <twaugh@redhat.com> 9.00-1
changelog:
  - Updated to 9.00.  No longer need -P-, CVE-2009-4270, CVE-2010-1628,
    SEARCH_HERE_FIRST, bbox-close, cups-realloc-color-depth,
    epstopdf-failure, fPIC, gdevcups-ripcache, iname-segfault, ldfalgs,
    pdf2dsc, pdftoraster-exit, tif-fail-close, tiff-default-strip-size,
    or tiff-fixes patches.


author: Tim Waugh <twaugh@redhat.com> 9.00-3
changelog:
  - Don't use carriage return in ps2epsi output (bug #635786).
  - Include more documentation (bug #634354).


author: Tim Waugh <twaugh@redhat.com> 9.00-8
changelog:
  - Applied upstream ICC fix (bug #655449).
  - gdevcups: use correct width and height values when allocating memory
    (upstream bug 691733).


author: Tim Waugh <twaugh@redhat.com> 9.01-1
changelog:
  - 9.01.  No longer needed gdevcups-691733, glyph-stretch-691920,
    icc-fix, scan_token, or system-jasper patches.


author: Tim Waugh <twaugh@redhat.com> - 9.05-3
changelog:
  - Removed more bundled packages (bug #816747).
  - Fixed missing error check when setting ICC profile.


author: Tim Waugh <twaugh@redhat.com> - 9.06-5
changelog:
  - Updated build requirement from gtk2-devel to gtk3-devel so that gsx
    gets built using the correct loader (bug #884483).


author: Tim Waugh <twaugh@redhat.com> 9.07-10
changelog:
  - Added in missing part of gs_sprintf backport: add in the header to
    stdio_.h. Without this there are problems with va_args on some
    platforms (bug #979681).


author: Tim Waugh <twaugh@redhat.com> 9.07-18
changelog:
  - Applied patch from upstream to fix memory handling issue that could
    lead to crashes (bug #1105519).


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.07-19
changelog:
  - Import LCMS2 2.6 rebase changes into ghostscript (bug #959351)
  - Fix hanging of ghostscript when converting PDF -> PNG (bug #1302121)
  - Do not SIGSEGV after icc_profile error, report error instead (bug #1243784)
  - Fix the color printing on HP InkJet printers (bug #1225858)


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.07-20_1
changelog:
  - Added security fixes for:
    - CVE-2013-5653 (bug #1380327)
    - CVE-2016-7977 (bug #1380415)
    - CVE-2016-7978 (bug #1382300)
    - CVE-2016-7979 (bug #1382305)
    - CVE-2016-8602 (bug #1383940)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix alpha semctl (#19199)
  - update to CVS, including:
    - fix glibc headers for Compaq non-gcc compilers
    - fix locale alias handling code (#18832)
    - fix rexec on little endian machines (#18886)
  - started writing changelog again


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update to CVS, including:
    - fix WORD_BIT/LONG_BIT definition in limits.h (#19088)
    - fix hesiod (#19375)
    - set LC_MESSAGES in zic/zdump for proper error message output (#19495)
    - fix LFS fcntl when used with non-LFS aware kernels (#19730)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update to CVS to:
    - fix getnameinfo (#21934)
    - don't stomp on memory in rpath handling (#21544)
    - fix setlocale (#21507)
  - fix libNoVersion.so.1 loading code (#21579)
  - use auxarches define in spec file for auxiliary
    architectures (#21219)
  - remove /usr/share directory from filelist (#21218)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - add glibc-common subpackage
  - fix alphaev6 memcpy (#22494)
  - fix sys/cdefs.h (#22908)
  - don't define stdin/stdout/stderr as macros for -traditional (#22913)
  - work around a bug in IBM JDK (#22932, #23012)
  - fix pmap_unset when network is down (#23176)
  - move nscd in rc.d before netfs on shutdown
  - fix $RESOLV_HOST_CONF in SUID apps (#23562)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - some more security fixes:
    - don't look up LD_PRELOAD libs in cache for SUID apps
      (because that bypasses SUID bit checking on the library)
    - place output files for profiling SUID apps into /var/profile,
      use O_NOFOLLOW for them
    - add checks for $MEMUSAGE_OUTPUT and $SEGFAULT_OUTPUT_NAME
  - hardlink identical locale files together
  - add %lang() tags to locale stuff
  - remove ko_KR.utf8 for now, it is provided by locale-utf8 package


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update to 2.2.1 final
    - fix a pthread_kill_other_threads_np breakage (#23966)
    - make static binaries using dlopen work on ia64 again
  - fix a typo in glibc-common group


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - build all auxiliary arches with --enablekernel 2.4.0, those wanting
    to run 2.2 kernels can downgrade to the base architecture glibc.


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update from CVS
    - fix ia64 build with gnupro
    - make regex 64bit clean
    - fix tgmath make check failures on alpha


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update from CVS
  - make pthread_attr_setstacksize consistent before and after pthread manager
    is started (#28194)
  - pass back struct sigcontext from pthread signal wrapper (on ia32 only so
    far, #28493)
  - on i686 ship both --enable-kernel 2.2.5 and 2.4.0 libc/libm/libpthread,
    make ld.so pick the right one


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - require 2.4.1 instead of 2.4.0 on platforms where it required 2.4 kernel
  - fix ldd behaviour on unresolved symbols
  - remove nonsensical ldconfig warning, update osversion for the most
    recent library with the same soname in the same directory instead (#31703)
  - apply selected patches from CVS
  - s390x spec file changes from Florian La Roche


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update from CVS
    - run atexit() registered functions at dlclose time if they are in shared
      libraries (#28625)
    - add pthread_getattr_np API to make JVM folks happy


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - support even 2.4.0 kernels on ia64, sparc64 and s390x
  - include UTF-8 locales
  - make gconv-modules %config(noreplace)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix locale name of ja_JP in UTF-8 (#39783)
  - fix re_search_2 (#40244)
  - fix memusage script (#39138, #39823)
  - fix dlsym(RTLD_NEXT, ) from main program (#39803)
  - fix xtrace script (#39609)
  - make glibc conflict with glibc-devel 2.2.2 and below (to make sure
    libc_nonshared.a has atexit)
  - fix getconf LFS_CFLAGS on 64bitters
  - recompile with gcc-2.96-84 or above to fix binary compatibility problem
    with __frame_state_for function (#37933)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix rpc for non-threaded apps using svc_fdset and similar variables (#40409)
  - fix nss compatibility DSO versions for alphaev6
  - add a hardlink program instead of the shell 3x for plus cmp -s/link
    which takes a lot of time during build
  - rework BuildPreReq and Conflicts with gcc, so that
    it applies only where it has to


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix the hardlink program, so that it really catches all files with
    identical content
  - add a s390x clone fix


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix #include <signal.h> with -D_XOPEN_SOURCE=500 on ia64 (#35968)
  - fix a dlclose reldeps handling bug
  - some more profiling fixes
  - fix tgmath.h


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix a bunch of math bugs (#43210, #43345, #43346, #43347, #43348, #43355)
  - make rpc headers -ansi compilable (#42390)
  - remove alphaev6 optimized memcpy, since there are still far too many
    broken apps which call memcpy where they should call memmove
  - update from CVS to (among other things):
    - fix tanhl bug (#43352)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update from CVS
    - kill non-pic code in libm.so
    - fix getdate
    - fix some locales (#49402)
  - rebuilt with binutils-2.11.90.0.8-5 to place .interp section
    properly in libBrokenLocale.so, libNoVersion.so and libanl.so
  - add floating stacks on IA-64, Alpha, Sparc (#49308)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - adjust prelinking DT_* and SHT_* values in elf.h
  - update from CVS
    - iconv cache
    - make iconv work in SUID/SGID programs (#34611)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - move iconvconfig from glibc-common into glibc subpackage,
    call it from glibc_post_upgrade instead of common's post.


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update from CVS
    - fix iconv cache handling
  - glibc should not own %{_infodir}, %{_mandir} nor %{_mandir}/man3 (#50673)
  - add gconv-modules.cache as emtpy config file (#50699)
  - only run iconvconfig if /usr is mounted read-write (#50667)


author: Jakub Jelinek <jakub@redhat.com> 2.2.4-3
changelog:
  - update from CVS to
    - fix strcoll (#50548)
    - fix seekdir (#51132)
    - fix memusage (#50606)
  - don't make gconv-modules.cache %config file, just don't verify
    its content.


author: Jakub Jelinek <jakub@redhat.com> 2.2.4-4
changelog:
  - don't crash on catclose(-1)
  - fix wscanf %[] handling
  - fix return value from swprintf
  - handle year + %U/%W week + week day in strptime


author: Jakub Jelinek <jakub@redhat.com> 2.2.4-8
changelog:
  - kill stale library symlinks in ldconfig (#52350)
  - fix inttypes.h for G++ < 3.0
  - use DT_REL*COUNT


author: Jakub Jelinek <jakub@redhat.com> 2.2.4-15
changelog:
  - update from CVS
    - linuxthreads now retries if -1/EINTR is returned from
      reading or writing to thread manager pipe (#43742)
  - use DT_FILTER in librt.so (#53394)
    - update glibc prelink patch so that it handles filters
  - fix timer_* with SIGEV_NONE (#53494)
  - make glibc_post_upgrade work on PPC (patch from Franz Sirl)


author: Jakub Jelinek <jakub@redhat.com> 2.2.4-17
changelog:
  - fix a ld.so lookup bug after lots of dlopen calls
  - fix CMSG_DATA for non-gcc non-ISOC99 compilers (#53984)
  - prelinking support for Sparc64


author: Jakub Jelinek <jakub@redhat.com> 2.2.4-18
changelog:
  - fix a ld.so bug with duplicate searchlists in l_scope
  - fix erfcl(-inf)
  - turn /usr/lib/librt.so into linker script


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-1
changelog:
  - update from CVS
  - remove -D__USE_STRING_INLINES
  - add debug subpackage to trim glibc and glibc-devel size


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-5
changelog:
  - update to CVS
  - added glibc-utils subpackage
  - disable autoreq in glibc-debug
  - readd %lang() to locale files


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-6
changelog:
  - fix mmap stdio bug (seen on ld as File truncated error, #60043)
  - apply Andreas Schwab's fix for pthread sigwait
  - remove /lib/i686/ libraries in glibc_post_upgrade when
    performing i386 glibc install


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-26
changelog:
  - update from CVS
  - use __attribute__((visibility(...))) if supported, use _rtld_local
    for ld.so only objects
  - provide libc's own __{,u}{div,mod}di3


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-27
changelog:
  - update from CVS
    - fix DST handling for southern hemisphere (#60747)
    - fix daylight setting for tzset (#59951)
    - fix ftime (#60350)
    - fix nice return value
    - fix a malloc segfault
  - temporarily moved __libc_wait, __libc_fork and __libc_stack_end
    back to what they used to be exported at
  - censorship (#60758)


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-28
changelog:
  - update from CVS
    - fix nscd with huge groups
    - fix nis to not close fds it shouldn't
  - rebuilt against newer glibc-kernheaders to use the correct
    PATH_MAX
  - handle .athlon.rpm glibc the same way as .i686.rpm
  - add a couple of .ISO-8859-15 locales (#61908)
  - readd temporarily currencies which were superceeded by Euro
    into the list of accepted currencies by localedef to make
    standard conformance testsuites happy
  - temporarily moved __libc_waitpid back to make Sun JDK happy
  - use old malloc code
  - prelink i686/athlon ld.so and prelink -r i686/athlon libc.so


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-31
changelog:
  - temporarily disable prelinking ld.so, as some statically linked
    binaries linked against debugging versions of old glibcs die on it
    (#62352)
  - fix <semaphore.h> for -std=c99 (#62516)
  - fix ether_ntohost segfault (#62397)
  - remove in glibc_post_upgrade on i386 all /lib/i686/libc-*.so,
    /lib/i686/libm-*.so and /lib/i686/libpthread-*.so, not just current
    version (#61633)
  - prelink -r on alpha too


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-32
changelog:
  - fix debugging of threaded apps (#62804)
  - fix DST for Estonia (#61494)
  - document that pthread_mutexattr_?etkind_np are deprecated
    and pthread_mutexattr_?ettype should be used instead in man
    pages (#61485)
  - fix libSegFault.so undefined externals


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-33
changelog:
  - handle Dec 31 1969 in mktime for timezones west of GMT (#63369)
  - back out do-lookup.h change (#63261, #63305)
  - use "memory" clobber instead all the fancy stuff in i386/i686/bits/string.h
    since lots of compilers break on it
  - fix sparc build with gcc 3.1
  - fix spec file for athlon


author: Jakub Jelinek <jakub@redhat.com> 2.2.5-34
changelog:
  - add relocation dependencies even for weak symbols (#63422)
  - stricter check_fds check for suid/sgid binaries
  - run make check at %install time


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-11
changelog:
  - update from CVS
    - fix __moddi3 (#65612, #65695)
    - fix ether_line (#64427)
  - fix setvbuf with mmap stdio (#65864)
  - --disable-tls for now, waiting for kernel
  - avoid duplication of __divtf3 etc. on IA-64
  - make sure get*ent_r and _IO_wfile_jumps are exported (#62278)


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-12
changelog:
  - update from CVS
    - don't use __thread in headers
  - fix system(3) in threaded apps
  - update prelink, so that it is possible to prelink -u libc.so.6.1
    on Alpha


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-15
changelog:
  - set nscd user's shell to /sbin/nologin (#68369)
  - fix glibc-compat buffer overflows (security)
  - buildrequire prelink, don't build glibc's own copy of it (#67567)
  - update from CVS
    - regex fix (#67734)
    - fix unused warnings (#67706)
    - fix freopen with mmap stdio (#67552)
    - fix realloc (#68499)


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-16
changelog:
  - update from CVS
    - ungetc fix (#69586)
    - fseek errno fix (#69589)
    - change *etrlimit prototypes for C++ (#68588)
  - use --without-tls instead of --disable-tls


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-19
changelog:
  - update from CVS
  - GB18030 patch from Yu Shao
  - applied Debian patch for getaddrinfo IPv4 vs. IPv6
  - fix regcomp (#71039)


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-21
changelog:
  - fix path to locale-archive in libc reader
  - build locale archive at glibc-common %post time
  - export __strtold_internal and __wcstold_internal on Alpha again
  - workaround some localedata problems


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-24
changelog:
  - update from CVS
    - only mmap up to 2MB of locale-archive on 32-bit machines
      initially
    - fix fseek past end + fread segfault with mmaped stdio
  - include <sys/debugreg.h> which is mistakenly not included
    in glibc-devel on IA-32


author: Jakub Jelinek <jakub@redhat.com> 2.2.90-25
changelog:
  - update from CVS
    - fix locale-archive loading hang on some (non-primary) locales
      (#72122, #71878)
    - fix umount problems with locale-archives when /usr is a separate
      partition (#72043)
  - add LICENSES file


author: Jakub Jelinek <jakub@redhat.com> 2.2.91-1
changelog:
  - update from CVS
    - 2.2.91 release
    - fix fd leaks in locale-archive reader (#72043)
  - handle EROFS in build-locale-archive gracefully (#71665)


author: Jakub Jelinek <jakub@redhat.com> 2.2.92-1
changelog:
  - update from CVS
    - 2.2.92 release
    - fix gettext after uselocale
    - fix locales in statically linked threaded programs
    - fix NSS


author: Jakub Jelinek <jakub@redhat.com> 2.2.93-1
changelog:
  - update from CVS
    - 2.2.93 release
    - use double instead of single indirection in isXXX macros
    - per-locale wcsmbs conversion state


author: Jakub Jelinek <jakub@redhat.com> 2.2.93-2
changelog:
  - temporarily add back __ctype_b, __ctype_tolower and __ctype_toupper to
    libc.a and export them as @@GLIBC_2.0 symbols, not @GLIBC_2.0
    from libc.so - we have still lots of .a libraries referencing
    __ctype_{b,tolower,toupper} out there...


author: Jakub Jelinek <jakub@redhat.com> 2.2.93-3
changelog:
  - security fix - increase dns-network.c MAXPACKET to at least
    65536 to avoid buffer overrun. Likewise glibc-compat
    dns-{host,network}.c.


author: Jakub Jelinek <jakub@redhat.com> 2.2.93-4
changelog:
  - fix /lib/libnss1_dns.so.1 (missing __set_h_errno definition
    leading to unresolved __set_h_errno symbol)


author: Jakub Jelinek <jakub@redhat.com> 2.2.93-5
changelog:
  - fix wcsmbs functions with invalid character sets (or malloc
    failures)
  - make sure __ctype_b etc. compat vars are updated even if
    they are copy relocs in the main program


author: Jakub Jelinek <jakub@redhat.com> 2.2.94-1
changelog:
  - update from CVS
  - prelink on ppc and x86-64 too
  - don't remove ppc memset
  - instead of listing on which arches to remove glibc-compat
    list where it should stay


author: Jakub Jelinek <jakub@redhat.com> 2.2.94-3
changelog:
  - don't prelink -r libc.so on ppc/x86-64/sparc*, it doesn't
    speed things up, because they are neither REL arches, nor
    ELF_MACHINE_REL_RELATIVE
  - fix sparc64 build


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-2
changelog:
  - update from CVS
    - don't need to use 128K of stacks for DNS lookups
    - regex fixes
    - updated timezone data e.g. for this year's Brasil DST
      changes
    - expand ${LIB} in RPATH/RUNPATH/dlopen filenames


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-3
changelog:
  - update from CVS
    - some more regex fixes
  - fix libpthread.a (#76484)
  - fix locale-archive enlarging


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-7
changelog:
  - update from CVS
  - restructured redhat/Makefile and spec, so that src.rpm contains
    glibc-<date>.tar.bz2, glibc-redhat-<date>.tar.bz2 and glibc-redhat.patch
  - added nptl


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-8
changelog:
  - update from CVS
    - make --enable-kernel=2.2.5 --with-tls --without-__thread
      ld.so load nptl and other --with-__thread libs
  - disable nptl by default for now


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-9
changelog:
  - update from CVS
    - RUSCII support (#78906)
  - for nptl builds add BuildRequires
  - fix byteswap.h for non-gcc (#77689)
  - add nptl-devel package


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-10
changelog:
  - update from CVS
  - non-nptl --with-tls --without-__thread FLOATING_STACKS libpthread
    should work now
  - faster libc locking when using nptl
  - add OUTPUT_FORMAT to linker scripts
  - fix x86_64 sendfile (#79111)


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-14
changelog:
  - update from CVS
    - replace __libc_lock_needed@GOTOFF(%ebx) with
      %gs:offsetof(tcbhead_t, multiple_threads)
    - start of new NPTL cancellation wrappers


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-15
changelog:
  - update from CVS
    - all functions which need cancellation should now be cancellable
      both in libpthread.so and libc.so
    - removed @@GLIBC_2.3.2 cancellation wrappers


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-16
changelog:
  - fix <bits/mathinline.h> and <bits/nan.h> for C++
  - automatically generate NPTL libpthread wrappers


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-17
changelog:
  - update from CVS
    - NPTL socket fixes, flockfile/ftrylockfile/funlockfile fix
    - kill -debug sub-package, rename -debug-static to -debug
    - clear dl_dynamic_weak for NPTL


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-18
changelog:
  - update from CVS
    - fix NPTL hanging mozilla
    - initialize malloc in mALLOPt (fixes problems with squid, #79957)
    - make linuxthreads work with dl_dynamic_weak 0
    - clear dl_dynamic_weak everywhere


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-21
changelog:
  - system(3) fix for linuxthreads
  - don't segfault in pthread_attr_init from libc.so
  - add cancellation tests from nptl to linuxthreads


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-27
changelog:
  - update from CVS
  - fix #include <sys/stat.h> with -D_BSD_SOURCE or without
    feature set macros
  - make *sigaction, sigwait and raise the same between
    -lpthread -lc and -lc -lpthread in linuxthreads builds


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-30
changelog:
  - fix condvar compatibility wrappers
  - add ugly hack to use non-TLS libs if a binary is seen
    to have errno, h_errno or _res symbols in .dynsym


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-32
changelog:
  - update from CVS
  - don't use TLS libs if kernel doesn't set AT_SYSINFO
    (#80921, #81212)
  - add ntp_adjtime on alpha (#79996)
  - fix nptl_db (#81116)


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-35
changelog:
  - update from CVS
    - dlclose bugfixes
  - fix NPTL libpthread.a
  - fix glibc_post_upgrade on several arches


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-36
changelog:
  - update from CVS
  - rework -debuginfo subpackage, add -debuginfo-common
    subpackage on IA-32, Alpha and Sparc (ie. auxiliary arches)
  - fix vfork in libc.a on PPC32, Alpha, Sparc
  - fix libio locks in linuxthreads libc.so if libpthread.so
    is dlopened later (#81374)


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-37
changelog:
  - update from CVS
    - nscd fixes, *scanf fix
  - fix %nptlarches noarch build (#81909)
  - IA-64 TLS fixes


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-38
changelog:
  - update from CVS
  - initialize __environ in glibc_post_upgrade to empty array,
    so that it is not NULL
  - compat symlink for s390x /lib/ld64.so.1
  - enable glibc-profile on x86-64
  - only include libNoVersion.so on IA-32, Alpha and Sparc 32-bit


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-43
changelog:
  - update from CVS
  - vfork fix on s390
  - rebuilt with binutils 2.13.90.0.18-5 so that accesses to errno
    don't bind locally (#83325)


author: Jakub Jelinek <jakub@redhat.com> 2.3.1-45
changelog:
  - update from CVS
  - include also linuxthreads FLOATING_STACKS libs on i686 and athlon:
    LD_ASSUME_KERNEL=2.2.5 to LD_ASSUME_KERNEL=2.4.0 is non-FLOATING_STACKS lt,
    LD_ASSUME_KERNEL=2.4.1 to LD_ASSUME_KERNEL=2.4.19 is FLOATING_STACKS lt,
    later is NPTL
  - enable TLS on alpha/alphaev6
  - add BuildPreReq: /usr/bin/readlink


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-3
changelog:
  - update from CVS
  - only warn about errno, h_errno or _res for binaries, never
    libraries
  - rebuilt with gcc-3.2.2-4 to use direct %gs TLS access insn sequences


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-9
changelog:
  - update from CVS
  - fix glibc-debug description (#85111)
  - make librt.so a symlink again, not linker script


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-15
changelog:
  - update from CVS
  - build glibc-compat (for glibc 2.0 compatibility) and c_stubs add-ons
  - condrestart sshd in glibc_post_upgrade so that the user can
    log in remotely and handle the rest (#86339)
  - fix a typo in glibc_post_upgrade on sparc


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-16
changelog:
  - update from CVS
    - export __fork from glibc again
  - fix glibc-compat build in NPTL
  - fix c_stubs
  - fix some more atomic.h problems
  - don't check abi in glibc-compat libs


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-18
changelog:
  - update from CVS
  - fix NPTL pthread_cond_timedwait
  - fix sysconf (_SC_MONOTONIC_CLOCK)
  - use /%{_lib}/tls instead of /lib/tls on x86-64
  - add /%{_lib}/tls/librt*so* and /%{_lib}/i686/librt*so*
  - display content of .out files for all make check failures


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-20
changelog:
  - update from CVS
  - if kernel >= 2.4.1 doesn't support NPTL, fall back to
    /lib/i686 libs on i686, not stright to /lib


author: Jakub Jelinek <jakub@redhat.com> 2.3.2-28
changelog:
  - update from CVS
    - fix NPTL pthread_detach and already terminated, but not yet
      joined thread (#88219)
    - fix bug-regex4 testcase (#88118)
    - reenable prelink support broken in 2.3.2-13
    - fix register_printf_function (#88052)
    - fix double free with fopen using ccs= (#88056)
    - fix potential access below $esp in {set,swap}context (#88093)
    - fix buffer underrun in gencat -H (#88099)
    - avoid using unitialized variable in tst-tgmath (#88101)
    - fix gammal (#88104)
    - fix iconv -c
    - fix xdr_string (PR libc/4999)
    - fix /usr/lib/nptl/librt.so symlink
    - avoid running NPTL cleanups twice in some cases
    - unblock __pthread_signal_cancel in linuxthreads, so that
      linuxthreads threaded programs work correctly if spawned
      from NPTL threaded programs
    - fix sysconf _SC_{NPROCESSORS_{CONF,ONLN},{,AV}PHYS_PAGES}
  - remove /lib/i686 directory before running ldconfig in glibc post
    during i686 -> i386 glibc "upgrades" (#88456)


