# changelog

author: Dan Walsh <dwalsh@redhat.com> - 2.1.13-4
changelog:
  - Add new constant SETRANS_DIR which points to the directory where mstransd can find the socket and libvirt can write its translations files.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.13-9
changelog:
  - Cleanup setfcontext_compile atomic patch
  - Add matchpathcon -P /etc/selinux/mls support by allowing users to set alternate root
  - Make sure we set exit codes from selinux_label calls to ENOENT or SUCCESS


author: Dan Walsh <dwalsh@redhat.com> - 2.1.13-16
changelog:
  - Add sefcontext_compile.8  man page
  - Add Russell Coker  patch to fix man pages
  - Add patches from Laurent Bigonville to fix Makefiles for debian.
  - modify spec file to use /usr/lib


author: Dan Walsh <dwalsh@redhat.com> - 2.1.13-21
changelog:
  - Add systemd_contexts support
  - Do substitutions on a local sub followed by a dist sub
  Resolves: #971425


author: Dan Walsh <dwalsh@redhat.com> - 2.2-1
changelog:
  - Update to upstream 
  	* Fix avc_has_perm() returns -1 even when SELinux is in permissive mode.
  	* Support overriding Makefile RANLIB from Sven Vermeulen.
  	* Update pkgconfig definition from Sven Vermeulen.
  	* Mount sysfs before trying to mount selinuxfs from Sven Vermeulen.
  	* Fix man pages from Laurent Bigonville.
  	* Support overriding PATH  and LIBBASE in Makefiles from Laurent Bigonville.
  	* Fix LDFLAGS usage from Laurent Bigonville
  	* Avoid shadowing stat in load_mmap from Joe MacDonald.
  	* Support building on older PCRE libraries from Joe MacDonald.
  	* Fix handling of temporary file in sefcontext_compile from Dan Walsh.
  	* Fix procattr cache from Dan Walsh.
  	* Define python constants for getenforce result from Dan Walsh.
  	* Fix label substitution handling of / from Dan Walsh.
  	* Add selinux_current_policy_path from Dan Walsh.
  	* Change get_context_list to only return good matches from Dan Walsh.
  	* Support udev-197 and higher from Sven Vermeulen and Dan Walsh.
  	* Add support for local substitutions from Dan Walsh.
  	* Change setfilecon to not return ENOSUP if context is already correct from Dan Walsh.
  	* Python wrapper leak fixes from Dan Walsh.
  	* Export SELINUX_TRANS_DIR definition in selinux.h from Dan Walsh.
  	* Add selinux_systemd_contexts_path from Dan Walsh.
  	* Add selinux_set_policy_root from Dan Walsh.
  	* Add man page for sefcontext_compile from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.2.1-1
changelog:
  - Update to upstream 
  	* Remove -lpthread from pkg-config file; it is not required.
  - Add support for policy compressed with xv


author: Dan Walsh <dwalsh@redhat.com> - 2.2.2-1
changelog:
  - Update to upstream 
        * Fix userspace AVC handling of per-domain permissive mode.
  - Verify context is not null when passed into *setfilecon_raw


author: Miroslav Grepl <mgrepl@redhat.com> - 2.2.2-4
changelog:
  - Fix libselinux.spec file
  - Move selinux.go to /usr/lib64/golang/src/pkg/github.com/selinux/selinux.go
  - Add Int_to_mcs function to generate MCS labels from integers.


author: Dan Walsh <dwalsh@redhat.com> - 2.2.2-5
changelog:
  - Move selinux.go to /usr/lib64/golang/src/pkg/github.com/selinux/selinux.go
  - Add Int_to_mcs function to generate MCS labels from integers.


author: Dan Walsh <dwalsh@redhat.com> - 2.2.2-6
changelog:
  - Add additional go bindings for get*con calls
  - Add go bindings test command
  - Modify man pages of set*con calls to mention that they are thread specific
  Resolves:#1053122


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-2
changelog:
  - Fix location of selinuxfs mount point (#1321086)
  - Only mount /proc if necessary
  - procattr: return einval for <= 0 pid args
  - procattr: return error on invalid pid_t inpu


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-3
changelog:
  - Fix setexecfilecon() to work better in a chroot (#1329931)
  - Fix typo in sefcontext_compile.8 (#1320062)


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-4
changelog:
  - Clarify is_selinux_mls_enabled() description
  - Explain how to free policy type from selinux_getpolicytype()
  - Compare absolute pathname in matchpathcon -V
  - Add selinux_snapperd_contexts_path()
  - Modify audit2why analyze function to use loaded policy
  - Sort object files for deterministic linking order
  - Respect CC and PKG_CONFIG environment variable
  - Avoid mounting /proc outside of selinux_init_load_policy()
  - Fix multiple spelling errors


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-10
changelog:
  - Add missing av_permission values (#1025931)
  - Set an appropriate errno in booleans.c (#1402140)
  - Change matchpathcon usage to match with matchpathcon manpage (#1412797)


author: Dan Walsh <dwalsh@redhat.com> 1.1.3-1
changelog:
  - Update from NSA
    * Merged errno fix from Joshua Brindle (Tresys).
    * Merged fix for semod_build_modules_list leak on error path
      from Serge Hallyn (IBM).  Bug found by Coverity.
    * Merged several fixes from Serge Hallyn (IBM).  Bugs found by
      Coverity.
    * Fixed several other bugs and warnings.
    * Merged patch to move module read/write code from libsemanage
      to libsepol from Jason Tang (Tresys).  
    * Merged relay records patch from Ivan Gyurdiev.
    * Merged key extract patch from Ivan Gyurdiev.

  - Initial version
  - Created by Stephen Smalley <sds@epoch.ncsc.mil>


author: Dan Walsh <dwalsh@redhat.com> 1.1.6-1
changelog:
  - Update from NSA
    * Merged semod.conf template patch from Dan Walsh (Red Hat),
    but restored location to /usr/share/semod/semod.conf.
    * Fixed several bugs found by valgrind.
    * Fixed bug in prior patch for the semod_build_module_list leak.
    * Merged errno fix from Joshua Brindle (Tresys).
    * Merged fix for semod_build_modules_list leak on error path
      from Serge Hallyn (IBM).  Bug found by Coverity.


author: Dan Walsh <dwalsh@redhat.com> 1.3.1-1
changelog:
  - Update from NSA
    * Merged stub functionality for managing user and port records,
    and record table code from Ivan Gyurdiev.
    * Updated version for release.


author: Dan Walsh <dwalsh@redhat.com> 1.3.2-1
changelog:
  - Update from NSA
    * Merged stub iterator functionality from Ivan Gyurdiev.
    * Merged interface record patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.3-1
changelog:
  - Update from NSA
    * Merged boolean record, stub record handler, and status codes 
      patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.5-1
changelog:
  - Update from NSA
    * Split interfaces from semanage.[hc] into handle.[hc], modules.[hc].
    * Separated handle create from connect interface.
    * Added a constructor for initialization.
    * Moved up src/include/*.h to src.
    * Created a symbol map file; dropped dso.h and hidden markings.


author: Dan Walsh <dwalsh@redhat.com> 1.3.7-1
changelog:
  - Update from NSA
    * Merged patch series from Ivan Gyurdiev.
      (pointer typedef elimination, file renames, dbase work, backend
       separation)
    * Split interfaces from semanage.[hc] into handle.[hc], modules.[hc].
    * Separated handle create from connect interface.
    * Added a constructor for initialization.
    * Moved up src/include/*.h to src.
    * Created a symbol map file; dropped dso.h and hidden markings.


author: Dan Walsh <dwalsh@redhat.com> 1.3.10-1
changelog:
  - Update from NSA
    * Updated for changes to libsepol, and to only use types and interfaces
    provided by the shared libsepol.


author: Dan Walsh <dwalsh@redhat.com> 1.3.11-1
changelog:
  - Update from NSA
    * Fixed semanage_install_active() to use the same logic for
    selecting a policy version as semanage_expand_sandbox().  Dropped
    dead code from semanage_install_sandbox().


author: Dan Walsh <dwalsh@redhat.com> 1.3.14-1
changelog:
  - Update from NSA
    * Updated to use get interfaces for hidden sepol_module_package type.
    * Changed semanage_expand_sandbox and semanage_install_active
    to generate/install the latest policy version supported  by libsepol
    by default (unless overridden by semanage.conf), since libselinux
    will now downgrade automatically for load_policy.
    * Merged new callback-based error reporting system and ongoing
    database work from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.18-1
changelog:
  - Update from NSA
    * Merged bugfix patch from Ivan Gyurdiev.
    * Merged seuser database patch from Ivan Gyurdiev.
    Merged direct user/port databases to the handle from Ivan Gyurdiev.
    * Removed obsolete include/semanage/commit_api.h (leftover).
    Merged seuser record patch from Ivan Gyurdiev.
    * Merged boolean and interface databases from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.20-1
changelog:
  - Update from NSA
    * Merged user and port APIs - policy database patch from Ivan
    Gyurdiev.
    * Converted calls to sepol link_packages and expand_module interfaces
    from using buffers to using sepol handles for error reporting, and 
    changed direct_connect/disconnect to create/destroy sepol handles.


author: Dan Walsh <dwalsh@redhat.com> 1.3.20-1
changelog:
  - Update from NSA
    * Changed default args for load_policy to be null, as it no longer
      takes a pathname argument and we want to preserve booleans.
    * Merged move local dbase initialization patch from Ivan Gyurdiev.
    * Merged acquire/release read lock in databases patch from Ivan Gyurdiev.
    * Merged rename direct -> policydb as appropriate patch from Ivan Gyurdiev.
    * Added calls to sepol_policy_file_set_handle interface prior
      to invoking sepol operations on policy files.
    * Updated call to sepol_policydb_from_image to pass the handle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.24-1
changelog:
  - Update from NSA
    * Merged default database from Ivan Gyurdiev.
    * Merged removal of connect requirement in policydb backend from
      Ivan Gyurdiev.
    * Merged commit locking fix and lock rename from Joshua Brindle.
    * Merged transaction rollback in lock patch from Joshua Brindle.
    * Changed default args for load_policy to be null, as it no longer
      takes a pathname argument and we want to preserve booleans.
    * Merged move local dbase initialization patch from Ivan Gyurdiev.
    * Merged acquire/release read lock in databases patch from Ivan Gyurdiev.
    * Merged rename direct -> policydb as appropriate patch from Ivan Gyurdiev.
    * Added calls to sepol_policy_file_set_handle interface prior
      to invoking sepol operations on policy files.
    * Updated call to sepol_policydb_from_image to pass the handle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.28-1
changelog:
  - Update from NSA
    * Merged interface renaming patch from Ivan Gyurdiev.
    * Merged policy component patch from Ivan Gyurdiev.
    * Renamed 'check=' configuration value to 'expand-check=' for 
      clarity.
    * Changed semanage_commit_sandbox to check for and report errors 
      on rename(2) calls performed during rollback.
    * Added optional check= configuration value to semanage.conf 
      and updated call to sepol_expand_module to pass its value
      to control assertion and hierarchy checking on module expansion.
    * Merged fixes for make DESTDIR= builds from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.30-1
changelog:
  - Update from NSA
    * Fixed policy file leaks in semanage_load_module and
      semanage_write_module.
    * Merged further database work from Ivan Gyurdiev.
    * Fixed bug in semanage_direct_disconnect.


author: Dan Walsh <dwalsh@redhat.com> 1.3.32-1
changelog:
  - Update from NSA
    * Merged resync to sepol changes and transaction fix patches from
      Ivan Gyurdiev.
    * Merged reorganize users patch from Ivan Gyurdiev.
    * Merged remove unused relay functions patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.34-1
changelog:
  - Update from NSA
    * Merged resync to sepol changes and booleans fixes/improvements 
      patches from Ivan Gyurdiev.
    * Merged support for genhomedircon/homedir template, store selection,
      explicit policy reload, and semanage.conf relocation from Joshua
      Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.35-1
changelog:
  - Update from NSA
    * Merged sepol handle passing, seusers support, and policydb cache
      patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.38-1
changelog:
  - Upgrade to latest from NSA
    * Merged dbase policydb list and count change from Ivan Gyurdiev.
    * Merged enable dbase and set relay patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.39-1
changelog:
  - Upgrade to latest from NSA
    * Merged record interface, dbase flush, common database code,
      and record bugfix patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.41-1
changelog:
  - Upgrade to latest from NSA
    * Merged interface parse/print, context_to_string interface change,
      move assert_noeof, and order preserving patches from Ivan Gyurdiev.
          * Added src/dso.h in preparation for other changes.
    * Merged install seusers, handle/error messages, MLS parsing,
      and seusers validation patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.3.43-1
changelog:
  - Upgrade to latest from NSA
    * Merged seuser parser resync, dbase tracking and cleanup, strtol
      bug, copyright, and assert space patches from Ivan Gyurdiev.
    * Added src/*_internal.h in preparation for other changes.
     * Added hidden/hidden_proto/hidden_def to src/debug.[hc] and
            src/seusers.[hc].


author: Dan Walsh <dwalsh@redhat.com> 1.3.48-1
changelog:
  - Upgrade to latest from NSA
    * Disabled calls to port dbase for merge and commit and stubbed
      out calls to sepol_port interfaces since they are not exported.
    * Merged rename instead of copy patch from Joshua Brindle (Tresys).
    * Added hidden_def/hidden_proto for exported symbols used within 
      libsemanage to eliminate relocations.  Wrapped type definitions
      in exported headers as needed to avoid conflicts.  Added
      src/context_internal.h and src/iface_internal.h.
    * Added semanage_is_managed() interface to allow detection of whether
      the policy is managed via libsemanage.  This enables proper handling
      in setsebool for non-managed systems.
    * Merged semanage_set_reload_bools() interface from Ivan Gyurdiev,
      to enable runtime control over preserving active boolean values
      versus reloading their saved settings upon commit.


author: Dan Walsh <dwalsh@redhat.com> 1.3.51-1
changelog:
  - Upgrade to latest from NSA
    * Clear modules modified flag upon disconnect and commit.
          * Added tracking of module modifications and use it to
      determine whether expand-time checks should be applied
      on commit.
    * Reverted semanage_set_reload_bools() interface.


author: Dan Walsh <dwalsh@redhat.com> 1.3.52-1
changelog:
  - Upgrade to latest from NSA
    * Merged cleanup patch from Ivan Gyurdiev.
      This renames semanage_module_conn to semanage_direct_handle,
      and moves sepol handle create/destroy into semanage handle
      create/destroy to allow use even when disconnected (for the
      record interfaces).


author: Dan Walsh <dwalsh@redhat.com> 1.3.53-1
changelog:
  - Upgrade to latest from NSA
    * Merged move seuser validation patch from Ivan Gyurdiev.
    * Merged hidden declaration fixes from Ivan Gyurdiev,
      with minor corrections.


author: Dan Walsh <dwalsh@redhat.com> 1.3.56-1
changelog:
  - Upgrade to latest from NSA
    * Fixed free->key_free bug.
    * Merged clear obsolete patch from Ivan Gyurdiev.
    * Merged modified swigify patch from Dan Walsh 
      (original patch from Joshua Brindle).
    * Merged move genhomedircon call patch from Chad Sellers.


author: Dan Walsh <dwalsh@redhat.com> 1.3.59-1
changelog:
  - Add additional swig objects
    * Merged wrap char*** for user_get_roles patch from Joshua Brindle.
    * Merged remove defrole from sepol patch from Ivan Gyurdiev.
    * Merged swig wrappers for modifying users and seusers from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.3.61-1
changelog:
  - Upgrade to latest from NSA
    * Merged Makefile python definitions patch from Dan Walsh.
    * Removed is_selinux_mls_enabled() conditionals in seusers and users
      file parsers.


author: Dan Walsh <dwalsh@redhat.com> 1.3.63-1
changelog:
  - Upgrade to latest from NSA
    * Dropped handle from user_del_role interface.
    * Removed defrole interfaces.


author: Dan Walsh <dwalsh@redhat.com> 1.3.64-1
changelog:
  - Upgrade to latest from NSA
    * Changed semanage_handle_create() to set do_reload based on
      is_selinux_enabled().  This prevents improper attempts to
      load policy on a non-SELinux system.


author: Dan Walsh <dwalsh@redhat.com> 1.5.1-1
changelog:
  - Upgrade to latest from NSA
    * Added file-mode= setting to semanage.conf, default to 0644.
      Changed semanage_copy_file and callers to use this mode when
      installing policy files to runtime locations.


author: Dan Walsh <dwalsh@redhat.com> 1.5.1-2
changelog:
  - Upgrade to latest from NSA
    * Merged toggle modified flag in policydb_modify, fix memory leak
      in clear_obsolete, polymorphism vs headers fix, and include guards
      for internal headers patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.3-1
changelog:
  - Upgrade to latest from NSA
    * Merged further header cleanups from Ivan Gyurdiev.
    * Merged toggle modified flag in policydb_modify, fix memory leak
      in clear_obsolete, polymorphism vs headers fix, and include guards
      for internal headers patches from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.4-1
changelog:
  - Upgrade to latest from NSA
    * Merged patch series from Ivan Gyurdiev.
      This includes patches to:
      - separate file rw code from linked list
      - annotate objects
      - fold together internal headers
      - support ordering of records in compare function
      - add active dbase backend, active booleans
      - return commit numbers for ro database calls
      - use modified flags to skip rebuild whenever possible
      - enable port interfaces
      - update swig interfaces and typemaps
      - add an API for file_contexts.local and file_contexts
      - flip the traversal order in iterate/list
      - reorganize sandbox_expand
      - add seusers MLS validation
      - improve dbase spec/documentation
      - clone record on set/add/modify


author: Dan Walsh <dwalsh@redhat.com> 1.5.6-1
changelog:
  - Upgrade to latest from NSA
    * Clarified error messages from parse_module_headers and 
      parse_base_headers for base/module mismatches.
    * Merged string and file optimization patch from Russell Coker.
    * Merged swig header reordering patch from Ivan Gyurdiev.
    * Merged toggle modify on add patch from Ivan Gyurdiev.
    * Merged ports parser bugfix patch from Ivan Gyurdiev.
    * Merged fcontext swig patch from Ivan Gyurdiev.
    * Merged remove add/modify/delete for active booleans patch from Ivan Gyurdiev.
    * Merged man pages for dbase functions patch from Ivan Gyurdiev.
    * Merged pywrap tests patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.8-1
changelog:
  - Upgrade to latest from NSA
    * Re-applied string and file optimization patch from Russell Coker,
      with bug fix.
    * Reverted string and file optimization patch from Russell Coker.
    * Clarified error messages from parse_module_headers and 
      parse_base_headers for base/module mismatches.


author: Dan Walsh <dwalsh@redhat.com> 1.5.9-1
changelog:
  - Upgrade to latest from NSA
    * Merged const in APIs patch from Ivan Gyurdiev.
    * Merged validation of local file contexts patch from Ivan Gyurdiev.
    * Merged compare2 function patch from Ivan Gyurdiev.
    * Merged hidden def/proto update patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.14-1
changelog:
  - Upgrade to latest from NSA
    * Merged disallow port overlap patch from Ivan Gyurdiev.
    * Merged join prereq and implementation patches from Ivan Gyurdiev.
    * Merged join user extra data part 2 patch from Ivan Gyurdiev.
    * Merged bugfix patch from Ivan Gyurdiev.
    * Merged remove add_local/set_local patch from Ivan Gyurdiev.
    * Merged user extra data part 1 patch from Ivan Gyurdiev.
    * Merged size_t -> unsigned int patch from Ivan Gyurdiev.
    * Merged calloc check in semanage_store patch from Ivan Gyurdiev,
      bug noticed by Steve Grubb.
    * Merged cleanups after add/set removal patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.15-1
changelog:
  - Upgrade to latest from NSA
    * Merged pywrap Makefile diff from Dan Walsh.
    * Merged cache management patch from Ivan Gyurdiev.
    * Merged bugfix for dbase_llist_clear from Ivan Gyurdiev.
    * Merged remove apply_local function patch from Ivan Gyurdiev.
    * Merged only do read locking in direct case patch from Ivan Gyurdiev.
    * Merged cache error path memory leak fix from Ivan Gyurdiev.
    * Merged auto-generated file header patch from Ivan Gyurdiev.
    * Merged pywrap test update from Ivan Gyurdiev.
    * Merged hidden defs update from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> 1.5.18-1
changelog:
  - Upgrade to latest from NSA
    * Merged seuser -> seuser_local rename patch from Ivan Gyurdiev.
    * Merged set_create_store, access_check, and is_connected interfaces
      from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> 1.5.19-1
changelog:
  - Upgrade to latest from NSA
    * Merged fname parameter patch from Ivan Gyurdiev.
    * Merged more size_t -> unsigned int fixes from Ivan Gyurdiev.
    * Merged seusers.system patch from Ivan Gyurdiev.
    * Merged improve port/fcontext API patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.21-1
changelog:
  - Upgrade to latest from NSA
    * Merged seuser/user_extra support patch from Joshua Brindle.
    * Merged remote system dbase patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.23-1
changelog:
  - Upgrade to latest from NSA
    * Merged optionals in base patch from Joshua Brindle.
    * Merged treat seusers/users_extra as optional sections patch from
      Ivan Gyurdiev.
    * Merged parse_optional fixes from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.26-1
changelog:
  - Upgrade to latest from NSA
    * Merged paths array patch from Ivan Gyurdiev.
    * Merged bug fix patch from Ivan Gyurdiev.
    * Merged improve bindings patch from Ivan Gyurdiev.
    * Merged use PyList patch from Ivan Gyurdiev.  
    * Merged memory leak fix patch from Ivan Gyurdiev.
    * Merged nodecon support patch from Ivan Gyurdiev.
    * Merged cleanups patch from Ivan Gyurdiev.
    * Merged split swig patch from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.5.28-1
changelog:
  - Upgrade to latest from NSA
    * Merged bug fix for fcontext validate handler from Ivan Gyurdiev.
    * Merged base_merge_components changes from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.6-1
changelog:
  - Make work on RHEL4
  - Upgrade to latest from NSA
    * Merged abort early on merge errors patch from Ivan Gyurdiev.
    * Cleaned up error handling in semanage_split_fc based on a patch
      by Serge Hallyn (IBM) and suggestions by Ivan Gyurdiev.
    * Merged MLS handling fixes from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.2-1
changelog:
  - Upgrade to latest from NSA
    * Merged Makefile PYLIBVER definition patch from Dan Walsh.
    * Merged man page reorganization from Ivan Gyurdiev.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.3-1
changelog:
  - Fix to work with new version of swig
  - Upgrade to latest from NSA
    * Merged corrected fix for descriptor leak from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.6-1
changelog:
  - Upgrade to latest from NSA
    * Merged updated file context sorting patch from Christopher
      Ashworth, with bug fix for escaped character flag.
    * Merged file context sorting code from Christopher Ashworth 
      (Tresys Technology), based on fc_sort.c code in refpolicy.
    * Merged python binding t_output_helper removal patch from Dan Walsh.
    * Regenerated swig files.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.8-1
changelog:
  - Upgrade to latest from NSA
    * Updated default location for setfiles to /sbin to
      match policycoreutils.  This can also be adjusted via 
      semanage.conf using the syntax:
      [setfiles]
      path = /path/to/setfiles
      args = -q -c $@ $<
      [end]


author: Dan Walsh <dwalsh@redhat.com> - 1.6.9-1
changelog:
  - Upgrade to latest from NSA
    * Merged several fixes from Serge Hallyn:
         dbase_file_cache:  deref of uninit data on error path.
         dbase_policydb_cache:  clear fp to avoid double fclose
         semanage_fc_sort:  destroy temp on error paths


author: Dan Walsh <dwalsh@redhat.com> - 1.6.12-1
changelog:
  - Upgrade to latest from NSA
    * Merged support for read operations on read-only fs from 
      Caleb Case (Tresys Technology).


author: Dan Walsh <dwalsh@redhat.com> - 1.6.15-1
changelog:
  - Upgrade to latest from NSA
    * Merged separate local file contexts patch from Chris PeBenito.
    * Merged patch to make most copy errors non-fatal from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.16-1
changelog:
  - Upgrade to latest from NSA
    * Make most copy errors fatal, but allow exceptions for
      file_contexts.local, seusers, and netfilter_contexts if
      the source file does not exist in the store.


author: Dan Walsh <dwalsh@redhat.com> - 1.6.17-1
changelog:
  - Upgrade to latest from NSA
    * Merged patch to skip reload if no active store exists and
      the store path doesn't match the active store path from Dan Walsh.
    * Merged patch to not destroy sepol handle on error path of
      connect from James Athey.
    * Merged patch to add genhomedircon path to semanage.conf from
      James Athey.


author: Dan Walsh <dwalsh@redhat.com> - 1.9.1-1
changelog:
  - Upgrade to latest from NSA
    * Merged patch to compile wit -fPIC instead of -fpic from
      Manoj Srivastava to prevent hitting the global offest table
      limit. Patch changed to include libselinux and libsemanage in
      addition to libsepol.


author: Dan Walsh <dwalsh@redhat.com> - 1.9.2-1
changelog:
  - Upgrade to latest from NSA
    * Merged patch to optionally reduce disk usage by removing 
      the backup module store and linked policy from Karl MacMillan
    * Merged patch to correctly propagate return values in libsemanage


author: Dan Walsh <dwalsh@redhat.com> - 1.10.1-1
changelog:
  - Upgrade to latest from NSA
    * Merged python binding fix from Dan Walsh.
    * Updated version for stable branch.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.0-1
changelog:
  - Upgrade to latest from NSA
    * Merged Makefile test target patch from Caleb Case.
    * Merged get_commit_number function rename patch from Caleb Case.
    * Merged strnlen -> strlen patch from Todd Miller.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.1-1
changelog:
  - Merged dbase_file_flush patch from Dan Walsh.
  - This removes any mention of specific tools (e.g. semanage)
  - from the comment header of the auto-generated files,
  - since there are multiple front-end tools.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.2-1
changelog:
  - Upgrade to latest from NSA
  - Merged optimizations from Stephen Smalley.
  -    do not set all booleans upon commit, only those whose values have changed
  -    only install the sandbox upon commit if something was rebuilt


author: Dan Walsh <dwalsh@redhat.com> - 2.0.3-1
changelog:
  - Upgrade to latest from NSA
    * Fix to libsemanage man patches so whatis will work better from Dan Walsh


author: Dan Walsh <dwalsh@redhat.com> - 2.0.4-1
changelog:
  - Upgrade to latest from NSA
    * Allow dontaudits to be turned off via semanage interface when
      updating policy


author: Dan Walsh <dwalsh@redhat.com> - 2.0.6-1
changelog:
  - Upgrade to latest from NSA
    * Change to use getpw* function calls to the _r versions from Todd Miller.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.9-1
changelog:
  - Upgrade to latest from NSA
    * Pass CFLAGS to CC even on link command, per Dennis Gilmore.
    * Clear errno on non-fatal errors to avoid reporting them upon a
      later error that does not set errno.
    * Improve reporting of system errors, e.g. full filesystem or read-only filesystem from Stephen Smalley.

  - Fix segfault in genhomedircon when using bad user names


author: Dan Walsh <dwalsh@redhat.com> - 2.0.10-1
changelog:
  - Upgrade to latest from NSA
    * Fix error checking on getpw*_r functions from Todd Miller.
    * Make genhomedircon skip invalid homedir contexts from Todd Miller.
    * Set default user and prefix from seusers from Dan Walsh.
    * Add swigify Makefile target from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.11-1
changelog:
  - Upgrade to latest from NSA
    * Fix ordering of file_contexts.homedirs from Todd Miller and Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.12-1
changelog:
  - Upgrade to latest from NSA
    * ustr cleanups from James Antill.
    * Ensure that /root gets labeled even if using the default context from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.14-1
changelog:
  - Upgrade to latest from NSA
    * Call rmdir() rather than remove() on directory removal so that errno isn't polluted from Stephen Smalley.
    * Allow handle_unknown in base to be overridden by semanage.conf from Stephen Smalley.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.15-1
changelog:
  - Update to upstream
    * Fix genhomedircon handling of shells and missing user context template from Dan Walsh.
    * Copy the store path in semanage_select_store from Dan Walsh.
  - Add expand-check=0 to semanage.conf


author: Dan Walsh <dwalsh@redhat.com> - 2.0.16-1
changelog:
  - Update to upstream
    * Merged fix for genhomedircon handling of missing HOME_DIR or HOME_ROOT templates from Caleb Case.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.18-1
changelog:
  - Update to upstream
    * Fix spurious out of memory error reports.
    * Merged second version of fix for genhomedircon handling from Caleb Case.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.19-1
changelog:
  - Update to upstream
    * Fix genhomedircon to not override a file context with a homedir context from Todd Miller.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.20-1
changelog:
  - Update to upstream
    * Use sepol_set_expand_consume_base to reduce peak memory usage when
    using semodule


author: Dan Walsh <dwalsh@redhat.com> - 2.0.22-1
changelog:
  - Update to upstream
    * Free policydb before fork from Joshua Brindle.
    * Drop the base module immediately after expanding to permit memory re-use from Stephen Smalley.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.23-1
changelog:
  - Update to upstream
    * Use vfork rather than fork for libsemanage helpers to reduce memory overhead as suggested by Todd Miller.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.25-1
changelog:
  - Update to upstream
    * Do not call genhomedircon if the policy was not rebuilt from Stephen Smalley.
      Fixes semanage boolean -D seg fault (bug 441379).


author: Dan Walsh <dwalsh@redhat.com> - 2.0.26-1
changelog:
  - Update to upstream
    * Fix bug in genhomedircon fcontext matches logic from Dan Walsh.
    Strip any trailing slash before appending /*$.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.27-1
changelog:
  - Update to upstream
    * Modify genhomedircon to skip groupname entries.
    Ultimately we need to expand them to the list of users to support per-role homedir labeling when using the groupname syntax.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.28-1
changelog:
  - Update to upstream
    * allow fcontext and seuser changes without rebuilding the policy from Dan Walsh


author: Dan Walsh <dwalsh@redhat.com> - 2.0.31-1
changelog:
  - Update to upstream
    * Policy module compression (bzip) support from Dan Walsh.
    * Hard link files between tmp/active/previous from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.35-1
changelog:
  - Revert hard linking of files between tmp/active/previous.
  - Enable configuration of bzip behavior from Stephen Smalley.
  -   bzip-blocksize=0 to disable compression and decompression support.
  -   bzip-blocksize=1..9 to set the blocksize for compression.
  -   bzip-small=true to reduce memory usage for decompression.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.36-1
changelog:
  - Update to upstream
    * Changed bzip-blocksize=0 handling to support existing compressed
    modules in the store.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.37-1
changelog:
  - Update to upstream
    * Fix persistent dontaudit support to rebuild policy if the 
          dontaudit state is changed from Chad Sellers.
  - Move load_policy to /sbin


author: Dan Walsh <dwalsh@redhat.com> - 2.0.38-1
changelog:
  - Update to upstream
    * Change semodule upgrade behavior to install even if the module
      is not present from Dan Walsh.
    * Make genhomedircon trim excess '/' from homedirs from Dan Walsh.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.41-1
changelog:
  - Update to upstream
    * Add pkgconfig file from Eamon Walsh.
    * Add semanage_set_check_contexts() function to disable calling
    setfiles


author: Dan Walsh <dwalsh@redhat.com> - 2.0.43-1
changelog:
  - Update to upstream
    * Move libsemanage.so to /usr/lib
    * Add NAME lines to man pages from Manoj Srivastava<srivasta@debian.org>


author: Dan Walsh <dwalsh@redhat.com> - 2.0.44-1
changelog:
  - Update to upstream
  	* Replace usage of fmemopen() with sepol_policy_file_set_mem() since
  	  glibc < 2.9 does not support binary mode ('b') for fmemopen'd
  	  streams.


author: Dan Walsh <dwalsh@redhat.com> - 2.0.45-1
changelog:
  - Update to upstream
  	* Add enable/disable patch support from Dan Walsh.
  	* Add usepasswd flag to semanage.conf to disable genhomedircon using
  	  passwd from Dan Walsh.
  	* regenerate swig wrappers


author: David Malcolm <dmalcolm@redhat.com> - 2.0.46-2
changelog:
  - big reworking of the support-multiple-python-builds patch to deal with
  PEP 3149: the latest Python 3.2 onwards uses include paths and library names
  that don't fit prior naming patterns, and so we must query python3-config for
  this information.  To complicate things further, python 2's python-config
  doesn't understand all of the options needed ("--extension-suffix").  I've
  thus added new Makefile variables as needed, to be supplied by the specfile by
  invoking the appropriate config tool (or by hardcoding the old value for
  "--extension-suffix" i.e. ".so")
  - rework python3 manifest for PEP 3149, and rebuild for newer python3


author: Dan Walsh <dwalsh@redhat.com> - 2.0.46-5
changelog:
  - Change libsemanage mechanism for handling disabled modules. Now it will only create a flag for a module 
  indicating the module is disabled.  MODULE.pp.disabled, it will no longer rename the module.  This way we can
  ship active modules in rpm.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.2-1
changelog:
  -Update to upstream
  2.1.2 2011-08-17
  	* print error debug info for buggy fc
  	* introduce semanage_set_root and friends
  	* throw exceptions in python rather than return
  	* python3 support.
  	* patch for MCS/MLS in user files

  2.1.1 2011-08-01
  	* Remove generated files, expand .gitignore
  	* Use -Werror and change a few prototypes to support it


author: Dan Walsh <dwalsh@redhat.com> - 2.1.4-1
changelog:
  -Update to upstream
  	* Create a new preserve_tunables flag
  	* tree: default make target to all not
  	* fix semanage_store_access_check calling arguments


author: Dan Walsh <dwalsh@redhat.com> - 2.1.5-1
changelog:
  - Upgrade to upstream
  	* regenerate .pc on VERSION change
  	* maintain mode even if umask is tighter
  	* semanage.conf man page
  	* create man5dir if not exist


author: Dan Walsh <dwalsh@redhat.com> - 2.1.6-1
changelog:
  -Update to upstream
  	* add ignoredirs config for genhomedircon
  	* Fallback_user_level can be NULL if you are not using MLS


author: Dan Walsh <dwalsh@redhat.com> - 2.1.7-1
changelog:
  - Update to upstream 
  	* Alternate path for semanage.conf
  	* do not link against libpython, this is considered bad in Debian
  	* Allow to build for several ruby version
  	* fallback-user-level


author: Dan Walsh <dwalsh@redhat.com> - 2.1.8-1
changelog:
  - Update to upstream 
  	* remove build warning when build swig c files
  	* additional makefile support for rubywrap
  	* ignore 80 column limit for readability
  	* semanage_store: fix snprintf length argument by using asprintf
  	* Use default semanage.conf as a fallback
  	* use after free in python bindings


author: Dan Walsh <dwalsh@redhat.com> - 2.1.8-3
changelog:
  - Attempt to allocate memory for selinux_binary_policy_path and free memory 
  - allocated by asprintf.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.9-1
changelog:
  - Update to upstream 
  	* libsemanage: do not set soname needlessly
  	* libsemanage: remove PYTHONLIBDIR and ruby equivalent
  	* do boolean name substitution
  	* Fix segfault for building standard policies.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.9-2
changelog:
  - Fix handling of missing semanage permissive -d foo, not failing correctly
  - Previous to this fix the first module beginning with foo would get deleted.


author: Dan Walsh <dwalsh@redhat.com> 2.1.9-3
changelog:
  - Update to latest patches from eparis/Upstream
  -    libsemanage: fixes from coverity
  -    libsemange: redo genhomedircon minuid


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-1
changelog:
  - Update to upstream 
  	* Add sefcontext_compile to compile regex everytime policy is rebuilt
  	* Cleanup/fix enable/disable/remove module.
  	* redo genhomedircon minuid
  	* fixes from coverity
  	* semanage_store: do not leak memory in semanage_exec_prog
  	* genhomedircon: remove useless conditional in get_home_dirs
  	* genhomedircon: double free in get_home_dirs
  	* fcontext_record: do not leak on error in semanage_fcontext_key_create
  	* genhomedircon: do not leak on failure in write_gen_home_dir_context
  	* semanage_store: do not leak fd 
  	* genhomedircon: do not leak shells list
  	* semanage_store: do not leak on strdup failure 
  	* semanage_store: rewrite for readability


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-6
changelog:
  - Remove dependance on selinux-policy, /etc/selinux should be owned by libsemanage, and selinux-policy can require it.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-7
changelog:
  - Move handling of role audit records into the library
  - Patch stops semanage from removing user record while in use


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-10
changelog:
  - Do not write error message to screen when looking for previous record for auditing.
  - Add mls_range from user record if the MLS range is not specified by the seuser add record.
  - Error out if seuser or mls range is not specified when adding user records


author: Dan Walsh <dwalsh@redhat.com> - 2.1.10-14
changelog:
  - Cleanup handling of missing mls_range to fix problems with useradd -Z
  - Fix auditing of login record changes, roles were not working correctly.
  Resolves: #1018840


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-3
changelog:
  - Sort object files for deterministic linking order
  - Support overriding Makefile RANLIB
  - Respect CC and PKG_CONFIG environment variable
  - Fix multiple spelling errors
  - genhomedircon: %{USERID} and %{USERNAME} support and code cleanups


author: Petr Lautrbach <plautrba@redhat.com> 2.5-4
changelog:
  - genhomedircon: add support for Development/Debug syntax
  - genhomedircon: generate contexts for logins mapped to the default user
  - Validate and compile file contexts before installing
  - Swap tcp and udp protocol numbers


author: Petr Lautrbach <plautrba@redhat.com> - 2.5-8
changelog:
  - Save linked policy, skip re-link when possible
  - Replace access(,F_OK) checks to make setuid programs work (#1186431)


author: Dmitry V. Levin <ldv@fandra.org>
changelog:
  - filtering out -fno-rtti and -fno-exceptions options from $RPM_OPT_FLAGS
  - minor install section cleanup


author: Denis Leroy <denis@poolshark.org> - 2.2.4.1-1
changelog:
  - Update to upstream 2.2.4.1
  - Added devhelp book and necessary BRs
  - Split documentation into new subpackage
  - Moved documentation to gtk-doc dir


author: Kalev Lember <kalev@smartlink.ee> - 2.2.8-4
changelog:
  - Spec cleanup
  - Use macro for automatically calculating ftp directory name with
    first two digits of tarball version.
  - Dropped R: pkgconfig from -devel as it's now automatically added by rpm
  - Own /usr/share/doc/libsigc++-2.0/ dir and mark /usr/share/devhelp/ as %doc
  - Require base package from -doc subpackage
  - Drop unneeded doxygen and graphviz BRs


author: Jeremy Katz <katzj@redhat.com> 0.7.4-3
changelog:
  - fix to not try to include non-existent doc files and remove all 
    unwanted files from the build
  - include api docs 
  - don't build the apache module


author: Jeremy Katz <katzj@redhat.com> 0.7.9-3
changelog:
  - better lib64 patch
  - fix building of libwsdl-build to use libtool so that it gets built 
    with -fPIC as needed


author: Jeremy Katz <katzj@redhat.com> 1.99.17-1
changelog:
  - rename package to libsoup
  - update to 1.99.17
  - don't obsolete soup for now, it's parallel installable


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-1
changelog:
  - update from 2.2.1 to 2.2.2
  - add explicit devel requirements on glib2-devel, pkgconfig, gtk-doc, gnutls-devel and libxml2-devel


author: David Malcolm <dmalcolm@redhat.com> - 2.2.5-1
changelog:
  - 2.2.5
  - Removed gnome-bug-306877-soup-connection-ntlm.c.patch (#160071) as this is 
    now in upstream tarball


author: Matthew Barnes <mbarnes@redhat.com> - 2.3.0-1
changelog:
  - Update to 2.3.0
  - Bump glib2 requirement to >= 2.15.3.
  - Clean up some redundant dependencies.
  - Remove patch for RH bug #327871 (fixed in glibc).


author: Matthias Clasen <mclasen@redhat.com> - 0.2.4-1
changelog:
  - Update to 0.2.4
  - See http://mail.gnome.org/archives/gnome-announce-list/2010-February/msg00059.html


author: Tony Asleson <tasleson@redhat.com> 0.0.3-1
changelog:
  - Changes to installer, daemon uid, gid, /var/run/lsm/*
  - NFS improvements and bug fixes
  - Python library clean up (rpmlint errors)


author: Tony Asleson <tasleson@redhat.com> 0.0.5-1
changelog:
  - Spec file clean-up improvements
  - Async. operation added to lsmcli and ability to check on job status
  - Sub volume replication support
  - Ability to check for child dependencies on VOLUMES, FS and files
  - SMI-S Bug fixes and improvements


author: Tony Asleson <tasleson@redhat.com> 0.0.6-1
changelog:
  - Documentation improvements (man & source code)
  - Support for access groups
  - Unified spec files Fedora/RHEL
  - Package version auto generate
  - Rpm target added to make
  - Bug fix for missing optional property on volume retrieval (smispy plug-in)


author: Tony Asleson <tasleson@redhat.com> 0.0.7-1
changelog:
  - Bug fix for smi-s constants
  - Display formatting improvements
  - Added header option for lsmcli
  - Improved version handling for builds
  - Made terminology consistent
  - Ability to list visibility for access groups and volumes
  - Simulator plug-in fully supports all block operations
  - Added support for multiple systems with a single plug-in instance


author: Tony Asleson <tasleson@redhat.com> 0.0.8-1
changelog:
  - Make building of SMI-S CPP plugin optional
  - Add pkg-config file
  - SMIS: Fix exception while retrieving Volumes
  - SMIS: Fix exception while retrieving Volumes
  - lsm: Add package imports
  - Make Smis class available in lsm python package
  - Add option to disable building C unit test
  - Make simulator classes available in lsm python package
  - Make ontap class available in lsm python package
  - Changes to support building on Fedora 17 (v2)
  - Spec. file updates from feedback from T. Callaway (spot)
  - F17 linker symbol visibility correction
  - Remove unneeded build dependencies and cleaned up some warnings
  - C Updates, client C library feature parity with python


author: Tony Asleson <tasleson@redhat.com> 0.0.9-1
changelog:
  - Initial checkin of lio plug-in
  - System filtering via URI (smispy)
  - Error code mapping (ontap)
  - Fixed build so same build tarball is used for all binaries


author: Tony Asleson <tasleson@redhat.com> - 0.0.20-1
changelog:
  - New upstream release
  - Separate package for python libraries
  - Make timestamps match on version.py in library
  - Add python-paramiko requirement for IBM plug-in


author: Tony Asleson <tasleson@redhat.com> 0.0.21-1
changelog:
  - New upstream release
  - Put plug-ins in separate sub packages
  - Don't include IBM plug-in on RHEL > 6, missing paramiko


author: Tony Asleson <tasleson@redhat.com> - 1.0.0-3
changelog:
  - Use new systemd rpm macros
    https://bugzilla.redhat.com/show_bug.cgi?id=1149010
  - Place config file in correct tmpfiles.d directory
    https://bugzilla.redhat.com/show_bug.cgi?id=1122087


author: Tony Asleson <tasleson@redhat.com> - 1.0.0-4
changelog:
  - Fix rpmdiff, error for path names
    https://bugzilla.redhat.com/show_bug.cgi?id=1149368
  - Fix rpmdiff, multilib regressions
    https://bugzilla.redhat.com/show_bug.cgi?id=1149371


author: Tony Asleson <tasleson@redhat.com> 1.2.3-1
changelog:
  - New upstream release
  - New sub-pacakges:
      * libstoragemgmt-megaraid-plugin
      * libstoragemgmt-hpsa-plugin
  - Add bash-completion script for lsmcli
  - Replace the hardcoded udev path with /usr/lib/udev/rules.d.
  - Mark /run/lsm and /run/lsm/ipc as %ghost folder.
  - Add 'Requires(post)' and 'Requires(postun)' to plugins in order
    to make sure plugin is installed after libstoragemgmt and removed before
    libstoragemgmt.


author: Tony Asleson <tasleson@redhat.com> 1.2.3-3
changelog:
  - Megaraid fixes
    * https://bugzilla.redhat.com/show_bug.cgi?id=1238554
    * https://bugzilla.redhat.com/show_bug.cgi?id=1238582
    * https://bugzilla.redhat.com/show_bug.cgi?id=1238566
  - Command line exit code fix:
    * https://bugzilla.redhat.com/show_bug.cgi?id=1238737


author: Gris Ge <fge@redhat.com> 1.4.0-1
changelog:
  - Add Python3 support.
  - New sub rpm package python3-libstoragemgmt.
  - Add support of lmiwbem.
  - Allow plugin test to be run concurrently.
  - Bug fixes:
      * Fix megaraid plugin for dell PERC.
      * Fix local disk rotation speed query on NVMe disk.
      * Fix lsmcli incorrect try-expect on local disk query.
      * Fix all the gcc compile warnings.
      * Fix the obsolete usage of AC_OUTPUT in configure.ac.
  - Library adds:
      * Query serial of local disk:
          lsm_local_disk_serial_num_get()/lsm.LocalDisk.serial_num_get()
      * Query LED status of local disk:
          lsm_local_disk_led_status_get()/lsm.LocalDisk.led_status_get()
      * Query link speed of local disk:
          lsm_local_disk_link_speed_get()/lsm.LocalDisk.link_speed_get()


author: Stephen Gallagher <sgallagh@redhat.com> - 2.0.5-7
changelog:
  - Let rpmbuild strip binaries, make build more verbose.
  - Resolves rhbz#669477 - libtalloc 2.0.5-6 binaries not stripped,
  -                        empty -debuginfo
  - Original patch by Ville SkyttÃ¤ <ville.skytta@iki.fi>


author: Simo Sorce <ssorce@redhat.com> - 2.0.6-1
changelog:
  - New upstream release
  - Fixes various bugs with talloc_free_children and freeing complex
    hierarchies with many siblinbgs.


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.8-1
changelog:
  - Rebase to libtalloc 2.1.8
  - Resolves: rhbz#1393811 - Rebase libtalloc to enable samba rebase to
                             version 4.6.x


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.9-1
changelog:
  - Rebase to libtalloc 2.1.9
  - Resolves: rhbz#1393811 - Rebase libtalloc to enable samba rebase to
                             version 4.6.x


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> 0:0.2.5-0.fdr.1
changelog:
  - updated to 0.2.5
  - changed license to LGPL
  - rearranged %check to reflect execution order
  - minor cosmetical changes


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 1.3-1
changelog:
  - updated to 1.3 (#426488, #431334)
  - use wrapper around libtasn1-config which should make it multilib
    safe (#342411); this implies an untagged 'Requires: pkgconfig' for
    -devel now
  - conditionalized BR of valgrind (#401041)


author: Tomas Mraz <tmraz@redhat.com> - 2.2-1
changelog:
  - updated to new upstream version
  - SMP build should work now
  - drop fix for spurious rpath - no longer necessary


author: Stephen Gallagher <sgallagh@redhat.com> - 1.2.9-1
changelog:
  - New upstream bugfix release
  - Adds a new tdbrestore utility
  - Convert to new WAF build-system
  - Add python bindings in new python-tdb subpackage


author: Stephen Gallagher <sgallagh@redhat.com> - 1.2.9-7
changelog:
  - Let rpmbuild strip binaries, make build more verbose.
  - Original patch by Ville SkyttÃ¤ <ville.skytta@iki.fi>


author: Stephen Gallagher <sgallagh@redhat.com> - 1.2.10-15
changelog:
  - New upstream release 1.2.10
  - Remove upstreamed patches
  - Provides functionality for the upcoming Samba 4 beta


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.6-2
changelog:
  - Resolves: rhbz#1241015 - tdb deadlocks if you acquire allrecord_lock
                             and start two traverses


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.12-2
changelog:
  - Resolves: rhbz#1441231 - The tdb robust mutexes runtime check is not thread safe and ends in a deadlock


author: Jiri Pirko <jpirko@redhat.com> - 1.9-1
changelog:
  - Rebase to 1.9
  - libteamdctl: remove false lib dependencies
  - teamdctl: use new port config get function
  - libteamdctl: introduce support for port config get
  - libteamdctl: cache reply strings into list
  - teamd: introduce PortConfigDump control method
  - teamd: make teamd_get_port_by_ifname ifname argument const
  - Minor improvements to style and language.
  - do not install example binaries
  - minor man page(s) correction(s) and lintianisation
  - teamdctl: print error message if ifindex cannot be obtained
  - fix cflags path in pc files
  Resolves: rhbz#1028138
  Resolves: rhbz#1013640
  Resolves: rhbz#1029186


author: Jiri Pirko <jpirko@redhat.com> - 1.9-3
changelog:
  - man teamdctl: Minor improvements to style and language [1055940]
  - man teamd.conf: Minor improvements to style and language [1055940]
  - fix comment typo in ifdown-Team scripts [1035173]


author: Jiri Pirko <jpirko@redhat.com> - 1.9-8
changelog:
  - teamd: fixed couple comments [1067851]
  - teamd: update hwaddr when changing team's macaddr [1067851]
  - redhat: fix boolean types in example 2 [1067851]


author: Jiri Pirko <jpirko@redhat.com> - 1.9-13
changelog:
  - teamdctl: add command for easy port presention checking [1081214]
  - initscripts: do not try to re-add port if it is already there [1081214]


author: Jiri Pirko <jpirko@redhat.com> - 1.9-14
changelog:
  - teamd_link_watch: allow to send ARP probes if no source_host is specified [1078993]
  - bond2team: do not guess source_host option [1079059]
  - teamd_link_watch: specify "missed_max" option default value [1079059]
  - man: correct type of "*_host" options [1078993]


author: Marcelo Ricardo Leitner <mleitner@redhat.com> - 1.25-2
changelog:
  - Updated to 1.25 [1286840 1286063]
  - Added patch teamd-LACP-runner-does-not-set-Agg-bit-on-first-slav.patch [1347818]


author: Marcelo Ricardo Leitner <mleitner@redhat.com> - 1.25-4
changelog:
  - Added patches to avoid hung on shutdown [1330550]
  - Added patch to fix an out-of-bound write with zero-length hardware
    address [1286840]


author: Xin Long <lxin@redhat.com> - 1.25-5
changelog:
  - Added patch to escape some sensitive characters [1383997]
  - Added patch to check port link_up when a port is added for lb runner
    [1393430]


author: Stephen Gallagher <sgallagh@redhat.com> - 0.9.15-1
changelog:
  - New upstream release 0.9.15
  - Properly re-sets the nested.level flag in the ev.ctx when reinitializing
    after a fork()
  - Allow tevent_signal events to be freed during their handler


author: Stephen Gallagher <sgallagh@redhat.com> - 0.9.16-1
changelog:
  - New upstream release 0.9.16
  - Adds tevent_*_trace_*() and tevent_context_init_ops()
  - Move tevent.py to the arch-specific directory


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.18-2
changelog:
  - Apply a patch from upstream to fix tevent_poll's additional_flags
    on 32bit architectures
  - Resolves: rhbz#975490


author: Stephen Gallagher <sgallagh@redhat.com> - 0.9.18-3
changelog:
  - Make the dependency requirements arch-specific
  - Remove ancient, unused patches
  - Remove python variables that are not needed on modern systems


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.21-2
changelog:
  - Allow building with RHEL-7.0 libtalloc
  - Resolves: rhbz#1133919 - Rebase libtevent to version 0.9.21 or newer


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.21-3
changelog:
  - BuildRequire the minimal applicable libtalloc version
  - Resolves: rhbz#1133919 - Rebase libtevent to version 0.9.21 or newer


author: Steve Dickson <steved@redhat.com> 0.1.7-2
changelog:
  - Uncommented tcp6 and udp6 in the default /etc/netconfig file.
  - Added hooks to used the libgssapi library.


author: <steved@redhat.com> 0.1.7-6
changelog:
  - Fixed potential buffer overflow in xdr_strings
  - Added a optimization to bindresvport that allows more
    ports to be tried.


author: <steved@redhat.com> 0.1.7-9
changelog:
  - Fixed mutex lock problem in clnt_raw_create()
  - Ignore the return value of snprintf() and use strlen() instead
    to bump the pointer in clnt_sperror()
  - A couple ntohs() were needed in bindresvport_sa()
  - Added IP_RECVERR processing with to clnt_dg_call() so
    application will see errors instead of timing out
  - Make sure remote address (xp_rtaddr) is populated
    with the correct type of address.
  - Change the order of network ids in /etc/netconfg
    putting ipv4 ids before ipv6.
  - Bumped up Release from 8 to 9.


author: Steve Dickson <steved@redhat.com> 0.1.7-11
changelog:
  - Made tcp6/udp6 network ids no longer visible in the netconfig
    file since the ipv6 code is not fully baked yet in rpcbind. (bz 249121)


author: Steve Dickson <steved@redhat.com> 0.1.9-5
changelog:
  - Fix for taddr2addr conversion bug of local addresses
  - Fixed some of warnings in: src/auth_time.c, src/clnt_dg.c and
    src/clnt_raw.c
  - Added some #ifdef NOTUSED around some code in src/rpbc_clnt.c
    that was not being used...


author: Steve Dickson <steved@redhat.com> 0.1.10-3
changelog:
  - backwards compatibility: fix order of fields in TI-RPC's 
    svc_req (bz 481388)
  - Removed a number warnings.


author: Steve Dickson <steved@redhat.com> 0.1.10-6
changelog:
  - libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
  - libtirpc: be sure to free cl_netid and cl_tp
  - libtirpc: must free saved wire verifier when destroying context


author: Tom "spot" Callaway <tcallawa@redhat.com> 0.1.11-3
changelog:
  - Replace the Sun RPC license with the BSD license, with the explicit permission of Sun Microsystems


author: Steve Dickson <steved@redhat.com> 0.2.0-2
changelog:
  - Updated to latest upstream tag: 0-2-1-rc2
      rpcb_clnt: RPC_PROGNOTREGISTERED is a permanent error
      clnt_dg: Fix infinite loop when datagram call times ou
      Updated .gitignore file
      Replace the hard coded path name with the top_srcdir macrc
      Added 'doc' to the SUBDIRS list so make install work correctly.


author: Steve Dickson <steved@redhat.com> 0.2.0-3
changelog:
  - Updated to latest upstream tag: 0-2-1-rc3
      Fixed the --disable-gss options
      Fixed a number of warnings
      Change how architectures are define in xdr_float.c


author: Karsten Hopp <karsten@redhat.com> 0.2.1-7.1
changelog:
  - replace Requires(devel) with a simple Requires as the new rpm
    aborts otherwise with "Bad Requireflags: qualifiers: Requires(devel)"


author: Steve Dickson <steved@redhat.com> 0.2.4-0.7
changelog:
  - Backported upstream debugging (bz 1273159)
  - Fixed memory leak in svc_vc_create (bz 1276685)
  - Fixed memory leaks in server-side GSS authenticator (bz 1282488)


author: Miroslav Rezanina <mrezanin@redhat.com> 1.1-2
changelog:
  - lu-Fix-rpmdiff-failure.patch [bz#1229359]
  - lu-Fix-buffer-overflow-reported-by-Coverity.patch [bz#1233114]
  - Resolves: bz#1229359
    (Fix multilib support)
  - Resolves: bz#1233114
    (fix off-by-one in dwarf_to_unw_regnum (CVE-2015-3239))


author: Miroslav Rezanina <mrezanin@redhat.com> 1.1-5
changelog:
  - Version bumped [bz#1238864]
  - Resolves: bz#1238864
    libunwind: bump version to win against existing branches


author: Miroslav Rezanina <mrezanin@redhat.com> 1.1-6.el7
changelog:
  - Fix update from EPEL version [bz#1289950]
  - Resolves: bz#1289950
    (libunwind in RHEL 7.2 has a smaller release than the last libunwind package in EPEL-7)


author: Miroslav Rezanina <mrezanin@redhat.com> 1.2-2.el7
changelog:
  - Rebase to 1.2 [bz#1384435]
  - Resolves: bz#1384435
    (Rebase libunwind package (and add for ppc64le): libunwind)


author: Doug Ledford <dledford@redhat.com> - 1.1.0.237-2
changelog:
  - Some of the scripts are missing the execute bit, fix that
  - Clean up the check script to be more appropriate for in-box use
  - Resolves: bz1182413, bz1182417


author: Jarod Wilson <jarod@redhat.com> - 2.0.1-1
changelog:
  - Update to libusnic_verbs v2.0.1 and usnic-tools v1.1.0.0
  - Use actual upstream tarballs
  - Call usnic-tools usnic-tools instead of libusnic_verbs-utils
  - Resolves: bz1281635


author: Jarod Wilson <jarod@redhat.com> - 2.0.1-3
changelog:
  - Add missing Requires: libusnic_verbs to usnic-tools sub-package
  - Bump to usnic-tools v1.1.1.0, drop patch that was merged upstream
  - BuildRequires: libibverbs v1.2.0 or later now, and infinipath-psm-devel
  - Related: bz1096997


author: Simone Caronni <negativo17@gmail.com> - 0.6-2
changelog:
  - Enable documentation by default.
  - Clean up spec file a bit; remove el5 tags.
  - Let %doc find the proper location for the documentation.


author: Benjamin Tissoires <benjamin.tissoires@redhat.com>
changelog:
  - Resolves rhbz #1253829 - fix 3 CVEs:
   - CVE-2015-5198: libvdpau incorrect check for security transition
   - CVE-2015-5199: libvdpau directory traversal in dlopen
   - CVE-2015-5200: libvdpau vulnerability in trace functionality


author: Daniel Veillard <veillard@redhat.com> 0.0.6-1
changelog:
  - added error handling APIs
  - small bug fixes
  - improve python bindings
  - augment documentation and regression tests


author: Daniel Veillard <veillard@redhat.com> 0.1.0-1
changelog:
  - various fixes
  - new APIs: for Node information and Reboot
  - virsh improvements and extensions
  - documentation updates and man page
  - enhancement and fixes of the XML description format


author: Daniel Veillard <veillard@redhat.com> 0.1.1-1
changelog:
  - extend and cleanup the driver infrastructure and code
  - python examples
  - extend uuid support
  - bug fixes, buffer handling cleanups
  - support for new Xen hypervisor API
  - test driver for unit testing
  - virsh --conect argument


author: Daniel Veillard <veillard@redhat.com> 0.1.4-1
changelog:
  - vCPUs and affinity support
  - more complete XML, console and boot options
  - specific features support
  - enforced read-only connections
  - various improvements, bug fixes


author: Daniel Veillard <veillard@redhat.com> 0.1.5-1
changelog:
  - new release
  - bug fixes
  - support for new hypervisor calls
  - early code for config files and defined domains


author: Daniel Veillard <veillard@redhat.com> 0.1.6-1
changelog:
  - Support for localization
  - Support for new Xen-3.0.3 cdrom and disk configuration
  - Support for setting VNC port
  - Fix bug when running against xen-3.0.2 hypercalls
  - Fix reconnection problem when talking directly to http xend


author: Daniel Veillard <veillard@redhat.com> 0.1.7-1
changelog:
  - Fix bug when running against xen-3.0.3 hypercalls
  - Fix memory bug when getting vcpus info from xend


author: Daniel Veillard <veillard@redhat.com> 0.1.8-1
changelog:
  - fix missing page size detection code for ia64
  - fix mlock size when getting domain info list from hypervisor
  - vcpu number initialization
  - don't label crashed domains as shut off
  - fix virsh man page
  - blktapdd support for alternate drivers like blktap
  - memory leak fixes (xend interface and XML parsing)
  - compile fix
  - mlock/munlock size fixes


author: Daniel Veillard <veillard@redhat.com> 0.1.9-1
changelog:
  - better error reporting
  - python bindings fixes and extensions
  - add support for shareable drives
  - add support for non-bridge style networking
  - hot plug device support
  - added support for inactive domains
  - API to dump core of domains
  - various bug fixes, cleanups and improvements
  - updated the localization


author: Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
changelog:
  - support for inactive Xen domains
  - improved support for Xen display and vnc
  - a few bug fixes
  - localization updates


author: Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
changelog:
  - Fixed path to qemu daemon for autostart
  - Fixed generation of <features> block in XML
  - Pre-create config directory at startup


author: Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
changelog:
  - Disable kqemu support since its not in Fedora qemu binary
  - Fix for -vnc arg syntax change in 0.9.0  QEMU


author: Daniel Veillard <veillard@redhat.com> - 0.2.1-1
changelog:
  - Release of 0.2.1
  - lot of bug and portability fixes
  - Add support for network autostart and init scripts
  - New API to detect the virtualization capabilities of a host
  - Documentation updates


author: Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
changelog:
  - don't require xen; we don't need the daemon and can control non-xen now
  - fix scriptlet error (need to own more directories)
  - update description text


author: Daniel Veillard <veillard@redhat.com> - 0.2.3-1
changelog:
  - Release of 0.2.3
  - lot of assorted bugfixes and cleanups
  - support for Xen-3.1
  - new scheduler API


author: Daniel Veillard <veillard@redhat.com> - 0.3.0-1
changelog:
  - Release of 0.3.0
  - Secure remote access support
  - unification of daemons
  - lots of assorted bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.3.1-1
changelog:
  - Release of 0.3.1
  - localtime clock support
  - PS/2 and USB input devices
  - lots of assorted bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.3.2-1
changelog:
  - Release of 0.3.2
  - API for domains migration
  - APIs for collecting statistics on disks and interfaces
  - lots of assorted bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.3.3-1
changelog:
  - Release of 0.3.3
  - Avahi support
  - NUMA support
  - lots of assorted improvements, bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.4.0-1
changelog:
  - Release of 0.4.0
  - SASL based authentication
  - PolicyKit authentication
  - improved NUMA and statistics support
  - lots of assorted improvements, bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.4.1-1
changelog:
  - Release of 0.4.1
  - Storage APIs
  - xenner support
  - lots of assorted improvements, bugfixes and cleanups
  - documentation and localization improvements


author: Daniel Veillard <veillard@redhat.com> - 0.7.0-1
changelog:
  - ESX, VBox3, Power Hypervisor drivers
  - new net filesystem glusterfs
  - Storage cloning for LVM and Disk backends
  - interface implementation based on netcf
  - Support cgroups in QEMU driver
  - QEmu hotplug NIC support
  - a lot of fixes


author: Mark McLoughlin <markmc@redhat.com> - 0.7.0-2
changelog:
  - Make sure qemu can access kernel/initrd (bug #516034)
  - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)


author: Mark McLoughlin <markmc@redhat.com> - 0.7.0-5
changelog:
  - Add PCI host device hotplug support
  - Allow PCI bus reset to reset other devices (#499678)
  - Fix stupid PCI reset error message (bug #499678)
  - Allow PM reset on multi-function PCI devices (bug #515689)
  - Re-attach PCI host devices after guest shuts down (bug #499561)
  - Fix list corruption after disk hot-unplug
  - Fix minor 'virsh nodedev-list --tree' annoyance


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.2.gitfac3f4c
changelog:
  - Update to newer snapshot of 0.7.1
  - Stop libvirt using untrusted 'info vcpus' PID data (#520864)
  - Support relabelling of USB and PCI devices
  - Enable multipath storage support
  - Restart libvirtd upon RPM upgrade


author: Daniel Veillard <veillard@redhat.com> - 0.7.1-1
changelog:
  - Upstream release of 0.7.1
  - ESX, VBox driver updates
  - mutipath support
  - support for encrypted (qcow) volume
  - compressed save image format for Qemu/KVM
  - QEmu host PCI device hotplug support
  - configuration of huge pages in guests
  - a lot of fixes


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-8
changelog:
  - Disable sound backend, even when selinux is disabled (#524499)
  - Re-label qcow2 backing files (#497131)


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-10
changelog:
  - Create /var/log/libvirt/{lxc,uml} dirs for logrotate
  - Make libvirt-python dependon on libvirt-client
  - Sync misc minor changes from upstream spec


author: Mark McLoughlin <markmc@redhat.com> - 0.7.1-11
changelog:
  - Fix libvirtd memory leak during error reply sending (#528162)
  - Add several PCI hot-unplug typo fixes from upstream


author: Daniel Veillard <veillard@redhat.com> - 0.7.2-1
changelog:
  - Upstream release of 0.7.2
  - Allow to define ESX domains
  - Allows suspend and resulme of LXC domains
  - API for data streams
  - many bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.7.4-1
changelog:
  - upstream release of 0.7.4
  - udev node device backend
  - API to check object properties
  - better QEmu monitor processing
  - MAC address based port filtering for qemu
  - support IPv6 and multiple addresses per interfaces
  - a lot of fixes


author: Daniel Veillard <veillard@redhat.com> - 0.7.5-1
changelog:
  - Add new API virDomainMemoryStats
  - Public API and domain extension for CPU flags
  - vbox: Add support for version 3.1
  - Support QEMU's virtual FAT block device driver
  - a lot of fixes


author: Daniel Veillard <veillard@redhat.com> - 0.7.6-1
changelog:
  - upstream release of 0.7.6
  - Use QEmu new device adressing when possible
  - Implement CPU topology support for QEMU driver
  - Implement SCSI controller hotplug/unplug for QEMU
  - Implement support for multi IQN
  - a lot of fixes and improvements


author: Adam Jackson <ajax@redhat.com> 0.7.6-2
changelog:
  - libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed
  - Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so


author: Daniel Veillard <veillard@redhat.com> - 0.7.7-1
changelog:
  - macvtap support
  - async job handling
  - virtio channel
  - computing baseline CPU
  - virDomain{Attach,Detach}DeviceFlags
  - assorted bug fixes and lots of cleanups


author: Cole Robinson <crobinso@redhat.com> - 0.7.7-2.fc14
changelog:
  - Fix USB devices by product with security enabled (bz 574136)
  - Set kernel/initrd in security driver, fixes some URL installs (bz 566425)


author: Daniel Veillard <veillard@redhat.com> - 0.8.0-1
changelog:
  - Upstream release 0.8.0
  - Snapshotting support (QEmu/VBox/ESX)
  - Network filtering API
  - XenAPI driver
  - new APIs for domain events
  - Libvirt managed save API
  - timer subselection for domain clock
  - synchronous hooks
  - API to update guest CPU to host CPU
  - virDomainUpdateDeviceFlags new API
  - migrate max downtime API
  - volume wiping API
  - and many bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-1
changelog:
  - Upstream release 0.8.1
  - Starts dnsmasq from libvirtd with --dhcp-hostsfile
  - Add virDomainGetBlockInfo API to query disk sizing
  - a lot of bug fixes and cleanups


author: Daniel Veillard <veillard@redhat.com> - 0.8.2-1
changelog:
  - Upstream release 0.8.2
  - phyp: adding support for IVM
  - libvirt: introduce domainCreateWithFlags API
  - add 802.1Qbh and 802.1Qbg switches handling
  - Support for VirtualBox version 3.2
  - Init script for handling guests on shutdown/boot
  - qemu: live migration with non-shared storage for kvm


author: Daniel P. Berrange <berrange@redhat.com> - 0.8.2-2
changelog:
  - CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores
  - CVE-2010-2238 ignoring defined disk backing store format when recursing into disk
    image backing stores
  - CVE-2010-2239 not setting user defined backing store format when creating new image
  - CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for
    obtaining privileged resources on the host


author: Daniel Veillard <veillard@redhat.com> - 0.8.5-1
changelog:
  - Enable JSON and netdev features in QEMU >= 0.13
  - framework for auditing integration
  - framework DTrace/SystemTap integration
  - Setting the number of vcpu at boot
  - Enable support for nested SVM
  - Virtio plan9fs filesystem QEMU
  - Memory parameter controls
  - various improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.8.7-1
changelog:
  - Preliminary support for VirtualBox 4.0
  - IPv6 support
  - Add VMware Workstation and Player driver driver
  - Add network disk support
  - Various improvements and bug fixes
  - from 0.8.6:
  - Add support for iSCSI target auto-discovery
  - QED: Basic support for QED images
  - remote console support
  - support for SPICE graphics
  - sysinfo and VMBIOS support
  - virsh qemu-monitor-command
  - various improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.8.8-1
changelog:
  - expose new API for sysinfo extraction
  - cgroup blkio weight support
  - smartcard device support
  - qemu: Support per-device boot ordering
  - Various improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.9.0-1
changelog:
  - Support cputune cpu usage tuning
  - Add public APIs for storage volume upload/download
  - Add public API for setting migration speed on the fly
  - Add libxenlight driver
  - qemu: support migration to fd
  - libvirt: add virDomain{Get,Set}BlkioParameters
  - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
  - Expose event loop implementation as a public API
  - Dump the debug buffer to libvirtd.log on fatal signal
  - Audit support
  - Various improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.9.1-1
changelog:
  - support various persistent domain updates
  - improvements on memory APIs
  - Add virDomainEventRebootNew
  - various improvements to libxl driver
  - Spice: support audio, images and stream compression
  - Various improvements and bug fixes


author: Richard W.M. Jones <rjones@redhat.com> - 0.9.1-3
changelog:
  - Add upstream patches:
      0001-json-Avoid-passing-large-positive-64-bit-integers-to.patch
      0001-qemudDomainMemoryPeek-change-ownership-selinux-label.patch
      0002-remote-remove-bogus-virDomainFree.patch
    so that users can try out virt-dmesg.
  - Change /var/cache mode to 0711.


author: Daniel Veillard <veillard@redhat.com> - 0.9.2-1
changelog:
  - Framework for lock manager plugins
  - API for network config change transactions
  - flags for setting memory parameters
  - virDomainGetState public API
  - qemu: allow blkstat/blkinfo calls during migration
  - Introduce migration v3 API
  - Defining the Screenshot public API
  - public API for NMI injection
  - Various improvements and bug fixes


author: Laine Stump <laine@redhat.com> - 0.9.2-2
changelog:
  - add rule to require netcf-0.1.8 during build so that new transactional
    network change APIs are included.
  - document that CVE-2011-2178 has been fixed (by virtue of rebase
    to 0.9.2 - see https://bugzilla.redhat.com/show_bug.cgi?id=709777)


author: Daniel Veillard <veillard@redhat.com> - 0.9.3-1
changelog:
  - new API virDomainGetVcpupinInfo
  - Add TXT record support for virtual DNS service
  - Support reboots with the QEMU driver
  - New API virDomainGetControlInfo API
  - New API virNodeGetMemoryStats
  - New API virNodeGetCPUTime
  - New API for send-key
  - New API virDomainPinVcpuFlags
  - support multifunction PCI device
  - lxc: various improvements
  - many improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.9.4-1
changelog:
  - network bandwidth QoS control
  - Add new API virDomainBlockPull*
  - save: new API to manipulate save file images
  - CPU bandwidth limits support
  - allow to send NMI and key event to guests
  - new API virDomainUndefineFlags
  - Implement code to attach to external QEMU instances
  - bios: Add support for SGA
  - various missing python binding
  - many improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.9.5-1
changelog:
  - many snapshot improvements (Eric Blake)
  - latency: Define new public API and structure (Osier Yang)
  - USB2 and various USB improvements (Marc-André Lureau)
  - storage: Add fs pool formatting (Osier Yang)
  - Add public API for getting migration speed (Jim Fehlig)
  - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
  - many improvements and bug fixes


author: Laine Stump <laine@redhat.com> - 0.9.6-2
changelog:
  - Make PCI multifunction support more manual - Bug 742836
  - F15 build still uses cgconfig - Bug 738725


author: Daniel Veillard <veillard@redhat.com> - 0.9.8-1
changelog:
  - Add support for QEMU 1.0
  - Add preliminary PPC cpu driver
  - Add new API virDomain{Set, Get}BlockIoTune
  - block_resize: Define the new API
  - Add a public API to invoke suspend/resume on the host
  - various improvements for LXC containers
  - Define keepalive protocol and add virConnectIsAlive API
  - Add support for STP and VLAN filtering
  - many improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - 0.9.9-1
changelog:
  - Add API virDomain{S,G}etInterfaceParameters
  - Add API virDomain{G, S}etNumaParameters
  - Add support for ppc64 qemu
  - Support Xen domctl v8
  - many improvements and bug fixes


author: Cole Robinson <crobinso@redhat.com> - 0.9.11.3-1
changelog:
  - Rebased to version 0.9.11.3
  - Abide URI username when connecting to hypervisor (bz 811397)
  - Fix managed USB mode (bz 814866)
  - Fix crash connecting to ESX host (bz 811891)


author: Daniel Veillard <veillard@redhat.com> - 0.9.12-1
changelog:
  - qemu: allow snapshotting of sheepdog and rbd disks
  - blockjob: add new APIs
  - a lot of bug fixes, improvements and portability work


author: Daniel Veillard <veillard@redhat.com> - 0.9.13-1
changelog:
  - S390: support for s390(x)
  - snapshot: implement new APIs for esx and vbox
  - snapshot: new query APIs and many improvements
  - virsh: Allow users to reedit rejected XML
  - nwfilter: add DHCP snooping
  - Enable driver modules in libvirt RPM
  - Default to enable driver modules for libvirtd
  - storage backend: Add RBD (RADOS Block Device) support
  - sVirt support for LXC domains inprovement
  - a lot of bug fixes, improvements and portability work


author: Daniel Veillard <veillard@redhat.com> - 0.10.0-1
changelog:
  - upstream release of 0.10.0
  - agent: add qemuAgentArbitraryCommand() for general qemu agent command
  - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
  - network: use firewalld instead of iptables, when available
  - network: make network driver vlan-aware
  - esx: Implement network driver
  - driver for parallels hypervisor
  - Various LXC improvements
  - Add virDomainGetHostname
  - a lot of bug fixes, improvements and portability work


author: Cole Robinson <crobinso@redhat.com> - 0.10.1-3
changelog:
  - Fix libvirtd segfault with old netcf-libs (bz 853381)
  - Drop unneeded dnsmasq --filterwin2k
  - Fix unwanted connection closing, needed for boxes


author: Daniel Veillard <veillard@redhat.com> - 0.10.2-1
changelog:
  - Upstream release 0.10.2
  - network: define new API virNetworkUpdate
  - add support for QEmu sandbox support
  - blockjob: add virDomainBlockCommit
  - New APIs to get/set Node memory parameters
  - new API virConnectListAllSecrets
  - new API virConnectListAllNWFilters
  - new API virConnectListAllNodeDevices
  - parallels: add support of containers to the driver
  - new API virConnectListAllInterfaces
  - new API virConnectListAllNetworks
  - new API virStoragePoolListAllVolumes
  - Add PMSUSPENDED life cycle event
  - new API virStorageListAllStoragePools
  - Add per-guest S3/S4 state configuration
  - qemu: Support for Block Device IO Limits
  - a lot of bug fixes, improvements and portability work


author: Richard W.M. Jones <rjones@redhat.com> - 0.10.2-3
changelog:
  - Re-add Use-qemu-system-i386-as-binary-instead-of-qemu.patch
    NB: This patch is Fedora-specific and not upstream.
  - Add upstream patches: don't duplicate environment variables (RHBZ#859596).


author: Cole Robinson <crobinso@redhat.com> - 0.10.2.1-1
changelog:
  - Rebased to version 0.10.2.1
  - Fix lvm volume creation when alloc=0 (bz #866481)
  - Clarify virsh send-keys man page example (bz #860004)
  - Fix occasional deadlock via virDomainDestroy (bz #859009)
  - Fix LXC deadlock from ctrl-c (bz #848119)
  - Fix occasional selinux denials with macvtap (bz #798605)
  - Fix multilib conflict with systemtap files (bz #831425)
  - Don't trigger keytab warning in system logs (bz #745203)
  - Fix qemu domxml-2-native NIC model out (bz #636832)
  - Fix error message if not enough space for lvm vol (bz #609104)


author: Jiri Denemark <jdenemar@redhat.com> - 1.0.5-2
changelog:
  - virInitctlRequest: Don't hardcode 384 bytes size
  - network: Fix network driver startup for qemu:///session
  - virInitctlRequest: Unbreak make syntax check
  - virInitctlRequest: Unbreak make syntax check
  - build: Always include sanitytest in tarball
  - qemu: Fix stupid typos in VFIO cgroup setup/teardown
  - build: Always include libvirt_lxc.syms in tarball
  - build: Clean up stray files found by 'make distcheck'
  - spec: Proper soft static allocation of qemu uid
  - Fix F_DUPFD_CLOEXEC operation args
  - build: Fix mingw build of virprocess.c
  - Fix potential use of undefined variable in remote dispatch code
  - build: Avoid non-portable cast of pthread_t
  - Fix release of resources with lockd plugin
  - Fixup rpcgen code on kFreeBSD too
  - Make detect_scsi_host_caps a function on all architectures
  - qemu: Allocate network connections sooner during domain startup
  - tests: Files named '.*-invalid.xml' should fail validation
  - conf: Don't crash on a tpm device with no backends
  - Don't mention disk controllers in generic controller errors
  - iscsi: Don't leak portal string when starting a pool
  - util: Fix virFileOpenAs return value and resulting error logs


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.0-2
changelog:
  - qemu: Fix double free in qemuMigrationPrepareDirect (rhbz#977961)
  - Fix crash when multiple event callbacks were registered (CVE-2013-2230)
  - Paused domain should remain paused after migration (rhbz#981139)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-2
changelog:
  - spec: Change --enable-werror handling to match upstream
  - Delete obsolete / unused python test files (rhbz#884103)
  - Remove reference to python/tests from RPM %doc (rhbz#884103)
  - spec: Explicitly claim ownership of channel subdir (rhbz#884103)
  - Add APIs for formatting systemd slice/scope names (rhbz#980929)
  - Add support for systemd cgroup mount (rhbz#980929)
  - Cope with races while killing processes (rhbz#980929)
  - Enable support for systemd-machined in cgroups creation (rhbz#980929)
  - Ensure LXC/QEMU APIs set the filename for errors (rhbz#991348)
  - Avoid crash if NULL is passed for filename/funcname in logging (rhbz#991348)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-3
changelog:
  - RPC: Don't accept client if it would overcommit max_clients (rhbz#981729)
  - Introduce max_queued_clients (rhbz#981729)
  - conf: Add default USB controller in qemu post-parse callback (rhbz#819968)
  - qemu: Rename some functions in qemu_command.c (rhbz#819968)
  - qemu: Eliminate almost-duplicate code in qemu_command.c (rhbz#819968)
  - qemu: Enable auto-allocate of all PCI addresses (rhbz#819968)
  - qemu: Add pcie-root controller (rhbz#819968)
  - qemu: Add dmi-to-pci-bridge controller (rhbz#819968)
  - qemu: Fix handling of default/implicit devices for q35 (rhbz#819968)
  - qemu: Properly set/use device alias for pci controllers (rhbz#819968)
  - qemu: Enable using implicit sata controller in q35 machines (rhbz#819968)
  - qemu: Improve error reporting during PCI address validation (rhbz#819968)
  - qemu: Refactor qemuDomainCheckDiskPresence for only disk presence check (rhbz#910171)
  - qemu: Add helper functions for diskchain checking (rhbz#910171)
  - qemu: Check presence of each disk and its backing file as well (rhbz#910171)
  - conf: Add startupPolicy attribute for harddisk (rhbz#910171)
  - qemu: Support to drop disk with 'optional' startupPolicy (rhbz#910171)
  - Split TLS test into two separate tests (rhbz#994158)
  - Avoid re-generating certs every time (rhbz#994158)
  - Change data passed into TLS test cases (rhbz#994158)
  - Fix validation of CA certificate chains (rhbz#994158)
  - Fix parallel runs of TLS test suites (rhbz#994158)
  - tests: Fix parallel runs of TLS test suites (rhbz#994158)
  - Add a man page for virtlockd daemon (rhbz#991494)
  - Add an example config file for virtlockd (rhbz#991494)
  - Properly handle -h / -V for --help/--version aliases in virtlockd/libvirtd (rhbz#991494)
  - Make check for /dev/loop device names stricter to avoid /dev/loop-control (rhbz#924815)
  - Ensure securityfs is mounted readonly in container (rhbz#872642)
  - Add info about access control checks into API reference (rhbz#700443)
  - Record the where the auto-generated data comes from (rhbz#700443)
  - Add documentation for access control system (rhbz#700443)
  - virsh-domain: Flip logic in cmdSetvcpus (rhbz#996552)
  - Honour root prefix in lxcContainerMountFSBlockAuto (rhbz#924815)
  - util: Add virGetUserDirectoryByUID (rhbz#988491)
  - Introduce a virt-login-shell binary (rhbz#988491)
  - build: Fix compilation of virt-login-shell.c (rhbz#988491)
  - Fix double-free and broken logic in virt-login-shell (rhbz#988491)
  - Address missed feedback from review of virt-login-shell (rhbz#988491)
  - Ensure that /dev exists in the container root filesystem (rhbz#924815)
  - remote: Fix a segfault in remoteDomainCreateWithFlags (rhbz#994855)
  - build: Avoid -lgcrypt with newer gnutls (rhbz#951637)
  - virnettlscontext: Resolve Coverity warnings (UNINIT) (rhbz#994158)
  - build: Fix missing max_queued_clients in augeas test file for libvirtd.conf (rhbz#981729)
  - virsh-domain: Fix memleak in cmdCPUBaseline (rhbz#997798)
  - Fix typo in domain name in polkit acl example (rhbz#700443)
  - Update polkit examples to use 'lookup' method (rhbz#700443)
  - Add bounds checking on virDomainMigrate*Params RPC calls (CVE-2013-4292) (rhbz#1002667)
  - Add bounds checking on virDomainGetJobStats RPC call (rhbz#1002667)
  - Add bounds checking on virDomain{SnapshotListAllChildren, ListAllSnapshots} RPC calls (rhbz#1002667)
  - Add bounds checking on virConnectListAllDomains RPC call (rhbz#1002667)
  - Add bounds checking on virConnectListAllStoragePools RPC call (rhbz#1002667)
  - Add bounds checking on virStoragePoolListAllVolumes RPC call (rhbz#1002667)
  - Add bounds checking on virConnectListAllNetworks RPC call (rhbz#1002667)
  - Add bounds checking on virConnectListAllInterfaces RPC call (rhbz#1002667)
  - Add bounds checking on virConnectListAllNodeDevices RPC call (rhbz#1002667)
  - Add bounds checking on virConnectListAllNWFilters RPC call (rhbz#1002667)
  - Add bounds checking on virConnectListAllSecrets RPC call (rhbz#1002667)
  - Prohibit unbounded arrays in XDR protocols (rhbz#1002667)
  - virbitmap: Refactor virBitmapParse to avoid access beyond bounds of array (rhbz#997906)
  - virbitmaptest: Fix function header formatting (rhbz#997906)
  - virbitmaptest: Add test for out of bounds condition (rhbz#997906)
  - virsh-domain: Fix memleak in cmdUndefine with storage (rhbz#999057)
  - virsh: Modify vshStringToArray to duplicate the elements too (rhbz#999057)
  - virsh: Don't leak list of volumes when undefining domain with storage (rhbz#999057)
  - Fix URI connect precedence (rhbz#999323)
  - tests: Add URI precedence checking (rhbz#999323)
  - Don't free NULL network in cmdNetworkUpdate (rhbz#1001094)
  - virsh: Fix debugging (rhbz#1001628)
  - qemu: Remove hostdev entry when freeing the depending network entry (rhbz#1002669)
  - Set security label on FD for virDomainOpenGraphics (rhbz#999925)
  - virsh: Free the caps list properly if one of them is invalid (rhbz#1001957)
  - virsh: Free the formatting string when listing pool details (rhbz#1001957)
  - virsh-pool.c: Don't jump over variable declaration (rhbz#1001957)
  - virsh: Free the list from ListAll APIs even for 0 items (rhbz#1001957)
  - virsh: Free messages after logging them to a file (rhbz#1001957)
  - Reverse logic allowing partial DHCP host XML (rhbz#1001078)
  - virsh: Print cephx and iscsi usage (rhbz#1000155)
  - qemu_conf: Fix broken logic for adding passthrough iscsi lun (rhbz#1000159)
  - Report secret usage error message similarly (rhbz#1000168)
  - docs: Update the formatdomain disk examples (rhbz#1000169)
  - docs: Update formatsecrets to include more examples of each type (rhbz#1000169)
  - docs: Update iSCSI storage pool example (rhbz#1000169)
  - docs: Reformat <disk> attribute description in formatdomain (rhbz#1000169)
  - qemuBuildNicDevStr: Add mq=on for multiqueue networking (rhbz#651941)
  - migration: Do not restore labels on failed migration (rhbz#822052)
  - qemu: Drop qemuDomainMemoryLimit (rhbz#1001143)
  - docs: Discourage users to set hard_limit (rhbz#1001143)
  - docs: Clean 09adfdc62de2b up (rhbz#1001143)
  - qemuSetupMemoryCgroup: Handle hard_limit properly (rhbz#1001143)
  - qemuBuildCommandLine: Fall back to mem balloon if there's no hard_limit (rhbz#1001143)
  - qemuDomainAttachHostPciDevice: Fall back to mem balloon if there's no hard_limit (rhbz#1001143)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-4
changelog:
  - Don't crash in qemuBuildDeviceAddressStr (rhbz#1003526)
  - Fix leaks in python bindings (rhbz#1003828)
  - Process virtlockd.conf instead of libvirtd.conf (rhbz#1003685)
  - test_virtlockd.aug.in: Use the correct file (rhbz#1003685)
  - qemu: Make domain renaming work during migration (rhbz#999352)
  - qemu: Handle huge number of queues correctly (rhbz#651941)
  - conf: Remove the actual hostdev when removing a network (rhbz#1003537)
  - conf: Don't deref NULL actual network in virDomainNetGetActualHostdev() (rhbz#1003537)
  - python: Fix a PyList usage mistake (rhbz#1002558)
  - Add '<nat>' element to '<forward>' network schemas (rhbz#1004364)
  - Always specify qcow2 compat level on qemu-img command line (rhbz#997977)
  - selinux: Distinguish failure to label from request to avoid label (rhbz#924153)
  - selinux: Enhance test to cover nfs label failure (rhbz#924153)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-5
changelog:
  - Pass AM_LDFLAGS to driver modules too (rhbz#1006299)
  - virsh domjobinfo: Do not return 1 if job is NONE (rhbz#1006864)
  - Fix polkit permission names for storage pools, vols & node devices (rhbz#700443)
  - Fix naming of permission for detecting storage pools (rhbz#700443)
  - security: Provide supplemental groups even when parsing label (CVE-2013-4291) (rhbz#1006513)
  - virFileNBDDeviceAssociate: Avoid use of uninitialized variable (CVE-2013-4297)
  - Rename "struct interface_driver" to virNetcfDriverState (rhbz#983026)
  - netcf driver: Use a single netcf handle for all connections (rhbz#983026)
  - virDomainDefParseXML: Set the argument of virBitmapFree to NULL after calling virBitmapFree (rhbz#1006722)
  - Add test for the nodemask double free crash (rhbz#1006722)
  - qemu: Fix checking of guest ABI compatibility when reverting snapshots (rhbz#1006886)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-6
changelog:
  - Also store user & group ID values in virIdentity (rhbz#1006272)
  - Ensure system identity includes process start time (rhbz#1006272)
  - Add support for using 3-arg pkcheck syntax for process (CVE-2013-4311)
  - Free slicename in virSystemdCreateMachine (rhbz#1008619)
  - qemu: Fix checking of ABI stability when restoring external checkpoints (rhbz#1008340)
  - qemu: Use "migratable" XML definition when doing external checkpoints (rhbz#1008340)
  - qemu: Fix memleak after commit 59898a88ce8431bd3ea249b8789edc2ef9985827 (rhbz#1008340)
  - qemu: Avoid dangling job in qemuDomainSetBlockIoTune (rhbz#700443)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-7
changelog:
  - Fix crash in remoteDispatchDomainMemoryStats (CVE-2013-4296)
  - LXC: Don't mount securityfs when user namespace enabled (rhbz#872648)
  - Move array of mounts out of lxcContainerMountBasicFS (rhbz#872648)
  - Ensure root filesystem is recursively mounted readonly (rhbz#872648)
  - qemu: Fix seamless SPICE migration (rhbz#1010861)
  - qemu: Use "ide" as device name for implicit SATA controller on Q35 (rhbz#1008903)
  - qemu: Only parse basename when determining emulator properties (rhbz#1010617)
  - qemu: Recognize -machine accel=kvm when parsing native (rhbz#1010617)
  - qemu: Don't leave shutdown inhibited on attach failure (rhbz#1010617)
  - qemu: Don't leak vm on failure (rhbz#1010617)
  - Fix typo in identity code which is pre-requisite for CVE-2013-4311 (rhbz#1006272)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-8
changelog:
  - conf: Don't crash on invalid chardev source definition of RNGs and other (rhbz#1012196)
  - rpc: Increase bound limit for virDomainGetJobStats (rhbz#1012818)
  - qemu: Free all driver data in qemuStateCleanup (rhbz#1011330)
  - qemu: Don't leak reference to virQEMUDriverConfigPtr (rhbz#1011330)
  - qemu: Eliminate redundant if clauses in qemuCollectPCIAddress (rhbz#1003983)
  - qemu: Allow some PCI devices to be attached to PCIe slots (rhbz#1003983)
  - qemu: Replace multiple strcmps with a switch on an enum (rhbz#1003983)
  - qemu: Support ich9-intel-hda audio device (rhbz#1003983)
  - qemu: Turn if into switch in qemuDomainValidateDevicePCISlotsQ35 (rhbz#1003983)
  - qemu: Prefer to put a Q35 machine's dmi-to-pci-bridge at 00:1E.0 (rhbz#1003983)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-9
changelog:
  - virNetDevBandwidthEqual: Make it more robust (rhbz#1014503)
  - qemu_hotplug: Allow QoS update in qemuDomainChangeNet (rhbz#1014503)
  - qemu: Check actual netdev type rather than config netdev type during init (rhbz#1012824)
  - Fix crash in libvirtd when events are registered & ACLs active (CVE-2013-4399) (rhbz#1011429)
  - Remove virConnectPtr arg from virNWFilterDefParse* (rhbz#1015108)
  - Don't pass virConnectPtr in nwfilter 'struct domUpdateCBStruct' (rhbz#1015108)
  - Remove use of virConnectPtr from all remaining nwfilter code (rhbz#1015108)
  - Don't set netdev offline in container cleanup (rhbz#1014604)
  - Avoid reporting an error if veth device is already deleted (rhbz#1014604)
  - Avoid deleting NULL veth device name (rhbz#1014604)
  - Retry veth device creation on failure (rhbz#1014604)
  - Use 'vnet' as prefix for veth devices (rhbz#1014604)
  - Free cmd in virNetDevVethDelete (rhbz#1014604)
  - Free cmd in virNetDevVethCreate (rhbz#1014604)
  - LXC: Fix handling of RAM filesystem size units (rhbz#1015689)
  - build: Add lxc testcase to dist list (rhbz#1015689)
  - tests: Work with older dbus (rhbz#1018730)
  - virdbus: Add virDBusHasSystemBus() (rhbz#1018730)
  - virsystemd: Don't fail to start VM if DBus isn't available or compiled in (rhbz#1018730)
  - DBus: Introduce virDBusIsServiceEnabled (rhbz#1018730)
  - Change way we fake dbus method calls (rhbz#1018730)
  - Fix virsystemdtest for previous commit (rhbz#1018730)
  - LXC: Workaround machined uncleaned data with containers running systemd. (rhbz#1018730)
  - Allow use of a private dbus bus connection (rhbz#998365)
  - Add a method for closing the dbus system bus connection (rhbz#998365)
  - Make LXC controller use a private dbus connection & close it (rhbz#998365)
  - Fix flaw in detecting log format (rhbz#927072)
  - Fix exit status of lxc controller (rhbz#927072)
  - Improve error reporting with LXC controller (rhbz#927072)
  - nwfilter: Don't fail to start if DBus isn't available (rhbz#927072)
  - Don't ignore all dbus connection errors (rhbz#927072)
  - LXC: Check the existence of dir before resolving symlinks (rhbz#927072)
  - Ensure lxcContainerMain reports errors on stderr (rhbz#927072)
  - Ensure lxcContainerResolveSymlinks reports errors (rhbz#927072)
  - Improve log filtering in virLXCProcessReadLogOutputData (rhbz#927072)
  - Initialize threading & error layer in LXC controller (rhbz#1018725)
  - qemu_migration: Avoid crashing if domain dies too quickly (rhbz#1018267)
  - Convert uuid to a string before printing it (rhbz#1019023)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-10
changelog:
  - qemu_process: Make qemuProcessReadLog() more versatile and reusable (rhbz#1001738)
  - qemu: monitor: Add infrastructure to access VM logs for better err msgs (rhbz#1001738)
  - qemu: monitor: Produce better errors on monitor hangup (rhbz#1001738)
  - qemu: Wire up better early error reporting (rhbz#1001738)
  - qemu: process: Silence coverity warning when rewinding log file (rhbz#1001738)
  - qemu: hostdev: Refactor PCI passhrough handling (rhbz#1001738)
  - qemu: hostdev: Fix function spacing and header formatting (rhbz#1001738)
  - qemu: hostdev: Add checks if PCI passthrough is available in the host (rhbz#1001738)
  - qemu: Prefer VFIO for PCI device passthrough (rhbz#1001738)
  - qemu: Init @pcidevs in qemuPrepareHostdevPCIDevices (rhbz#1001738)
  - Fix max stream packet size for old clients (rhbz#950416)
  - Adjust legacy max payload size to account for header information (rhbz#950416)
  - rpc: Correct the wrong payload size checking (rhbz#950416)
  - qemu: Simplify calling qemuDomainHostdevNetConfigRestore (rhbz#1005682)
  - qemu: Move qemuDomainRemoveNetDevice to avoid forward reference (rhbz#1005682)
  - qemu: Fix removal of <interface type='hostdev'> (rhbz#1005682)
  - remote: Fix regression in event deregistration (rhbz#1020376)
  - qemu: managedsave: Add support for compressing managed save images (rhbz#1017227)
  - qemu: snapshot: Add support for compressing external snapshot memory (rhbz#1017227)
  - Migration: Introduce VIR_MIGRATE_PARAM_LISTEN_ADDRESS (rhbz#1015215)
  - virsocket: Introduce virSocketAddrIsWildcard (rhbz#1015215)
  - qemu: Implement support for VIR_MIGRATE_PARAM_LISTEN_ADDRESS (rhbz#1015215)
  - qemu_conf: Introduce "migration_address" (rhbz#1015215)
  - qemu: Include listenAddress in debug prints (rhbz#1015215)
  - docs: Expand description of host-model CPU mode (rhbz#1014682)
  - qemu: Avoid assigning unavailable migration ports (rhbz#1019237)
  - qemu: Make migration port range configurable (rhbz#1019237)
  - qemu: Fix augeas support for migration ports (rhbz#1019237)
  - Fix perms for virConnectDomainXML{To, From}Native (CVE-2013-4401)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-11
changelog:
  - Add helpers for getting env vars in a setuid environment (rhbz#1015247)
  - Only allow 'stderr' log output when running setuid (CVE-2013-4400)
  - Close all non-stdio FDs in virt-login-shell (CVE-2013-4400)
  - Don't link virt-login-shell against libvirt.so (CVE-2013-4400)
  - build: Fix linking virt-login-shell (rhbz#1015247)
  - build: Fix build of virt-login-shell on systems with older gnutls (rhbz#1015247)
  - Set a sane $PATH for virt-login-shell (rhbz#1015247)
  - spec: Fix rpm build when lxc disabled (rhbz#1015247)
  - Move virt-login-shell into libvirt-login-shell sub-RPM (rhbz#1015247)
  - Make virCommand env handling robust in setuid env (rhbz#1015247)
  - Remove all direct use of getenv (rhbz#1015247)
  - Block all use of getenv with syntax-check (rhbz#1015247)
  - Only allow the UNIX transport in remote driver when setuid (rhbz#1015247)
  - Don't allow remote driver daemon autostart when running setuid (rhbz#1015247)
  - Add stub getegid impl for platforms lacking it (rhbz#1015247)
  - Remove (nearly) all use of getuid()/getgid() (rhbz#1015247)
  - Block all use of libvirt.so in setuid programs (rhbz#1015247)
  - spec: Clean up distribution of ChangeLog (and others) (rhbz#1024393)
  - Push RPM deps down into libvirt-daemon-driver-XXXX sub-RPMs (rhbz#1024393)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-12
changelog:
  - virpci: Don't error on unbinded devices (rhbz#1019387)
  - network: Fix connections count in case of allocate failure (rhbz#1020135)
  - qemu: Clean up migration ports when migration cancelled (rhbz#1019237)
  - qemuMigrationBeginPhase: Check for 'drive-mirror' for NBD (rhbz#1022393)
  - Allow root directory in filesystem source dir schema (rhbz#1028107)
  - Use a port from the migration range for NBD as well (rhbz#1025699)
  - qemu: Avoid double free of VM (rhbz#1018267)
  - util: Use size_t instead of unsigned int for num_virtual_functions (rhbz#1025397)
  - pci: Properly handle out-of-order SRIOV virtual functions (rhbz#1025397)
  - conf: Do better job when comparing features ABI compatibility (rhbz#1008989)
  - schema: Rename option 'hypervtristate' to 'featurestate' (rhbz#1008989)
  - conf: Mark user provided strings in error messages when parsing XML (rhbz#1008989)
  - cpu: Add support for loading and storing CPU data (rhbz#1008989)
  - cpu: x86: Rename struct cpuX86cpuid as virCPUx86CPUID (rhbz#1008989)
  - cpu: x86: Rename struct cpuX86Data as virCPUx86Data (rhbz#1008989)
  - cpu: x86: Rename x86DataFree() as virCPUx86DataFree() (rhbz#1008989)
  - Ensure 'arch' is always set in cpuArchNodeData (rhbz#1008989)
  - cpu: x86: Rename x86MakeCPUData as virCPUx86MakeData (rhbz#1008989)
  - cpu: x86: Rename x86DataAddCpuid as virCPUx86DataAddCPUID (rhbz#1008989)
  - cpu: x86: Rename data_iterator and DATA_ITERATOR_INIT (rhbz#1008989)
  - cpu: x86: Fix return types of x86cpuidMatch and x86cpuidMatchMasked (rhbz#1008989)
  - cpu: x86: Use whitespace to clarify context and use consistent labels (rhbz#1008989)
  - cpu: x86: Clean up error messages in x86VendorLoad() (rhbz#1008989)
  - cpu: Export few x86-specific APIs (rhbz#1008989)
  - cpu: x86: Parse the CPU feature map only once (rhbz#1008989)
  - cpu_x86: Refactor storage of CPUID data to add support for KVM features (rhbz#1008989)
  - qemu: Add monitor APIs to fetch CPUID data from QEMU (rhbz#1008989)
  - cpu: x86: Add internal CPUID features support and KVM feature bits (rhbz#1008989)
  - conf: Refactor storing and usage of feature flags (rhbz#1008989)
  - qemu: Add support for paravirtual spinlocks in the guest (rhbz#1008989)
  - qemu: process: Validate specific CPUID flags of a guest (rhbz#1008989)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-13
changelog:
  - virsh-domain: Mark --live and --config mutually exclusive in vcpucount (rhbz#1024245)
  - virSecurityLabelDefParseXML: Don't parse label on model='none' (rhbz#1028962)
  - qemuMonitorIO: Don't use @mon after it's unrefed (rhbz#1018267)
  - qemu: Allow hotplug of multiple SCSI devices (rhbz#1031062)
  - qemu: Call qemuSetupHostdevCGroup later during hotplug (rhbz#1025108)
  - virscsi: Hostdev SCSI AdapterId retrieval fix (rhbz#1031079)
  - storage: Returns earlier if source adapter of the scsi pool is a HBA (rhbz#1027680)
  - spec: Restrict virt-login-shell usage (rhbz#1033614)
  - spec: Don't save/restore running VMs on libvirt-client update (rhbz#1033626)
  - Don't start a nested job in qemuMigrationPrepareAny (rhbz#1018267)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-14
changelog:
  - nodedev: Resolve Relax-NG validity error (rhbz#1035792)
  - test-lib: Make case skipping possible (rhbz#1034380)
  - tests: Don't test user config file if ran as root (rhbz#1034380)
  - Improve cgroups docs to cover systemd integration (rhbz#1004340)
  - Fix busy wait loop in LXC container I/O handling (rhbz#1032705)
  - tests: Guarantee abs_srcdir in all C tests (rhbz#1035403)
  - Introduce standard methods for sorting strings with qsort (rhbz#1035403)
  - Add virFileIsMountPoint function (rhbz#1035403)
  - Pull lxcContainerGetSubtree out into shared virfile module (rhbz#1035403)
  - Fix bug in identifying sub-mounts (rhbz#1035403)
  - LXC: Ensure security context is set when mounting images (rhbz#923903)
  - Ensure to zero out the virDomainBlockJobInfo arg (rhbz#1028846)
  - qemu: Default to vfio for nodedev-detach (rhbz#1035188)
  - daemon: Run virStateCleanup conditionally (rhbz#1033061)
  - qemu: Add "-boot strict" to commandline whenever possible (rhbz#1037593)
  - tests: Add forgotten boot-strict test files (rhbz#1037593)
  - conf: Fix XML formatting of RNG device info (rhbz#1035118)
  - qemu: Improve error when setting invalid count of vcpus via agent (rhbz#1035108)
  - Add qxl ram size to ABI stability check (rhbz#1035123)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-15
changelog:
  - spec: Don't save/restore running VMs on libvirt-client update (rhbz#1033626)
  - qemu: hotplug: Only label hostdev after checking device conflicts (rhbz#1025108)
  - qemu: hotplug: Fix double free on USB collision (rhbz#1025108)
  - qemu: hotplug: Fix adding USB devices to the driver list (rhbz#1025108)
  - docs: Enhance memoryBacking/locked documentation (rhbz#1035954)
  - util: Fix two virCompareLimitUlong bugs (rhbz#1024272)
  - cgroups: Redefine what "unlimited" means wrt memory limits (rhbz#1024272)
  - qemu: Report VIR_DOMAIN_MEMORY_PARAM_UNLIMITED properly (rhbz#1024272)
  - qemu: Fix minor inconsistency in error message (rhbz#1024272)
  - conf: Don't format memtune with unlimited values (rhbz#1024272)
  - qemu_process: Read errors from child (rhbz#1035955)
  - network: Properly update iptables rules during net-update (rhbz#1035336)
  - Tie SASL callbacks lifecycle to virNetSessionSASLContext (rhbz#1039991)
  - screenshot: Implement multiple screen support (rhbz#1026966)
  - Switch to private redhat namespace for QMP I/O error reason (rhbz#1026966)
  - Support virtio disk hotplug in JSON mode (rhbz#1026966)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-16
changelog:
  - qemu: Check for reboot-timeout on monitor (rhbz#1042690)
  - virsh: Fix return value error of cpu-stats (rhbz#1043388)
  - tools: Fix virsh connect man page (rhbz#1043260)
  - conf: Introduce generic ISA address (rhbz#996520)
  - conf: Add support for panic device (rhbz#996520)
  - qemu: Add support for -device pvpanic (rhbz#996520)
  - Fix invalid read in virNetSASLSessionClientStep debug log (rhbz#1043864)
  - virsh: man: Mention that volumes need to be in storage pool for undefine (rhbz#1044445)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-18
changelog:
  - qemu: Ask for -enable-fips when FIPS is required (rhbz#1035474)
  - qemu: Properly set MaxMemLock when hotplugging with VFIO (rhbz#1035490)
  - qemu: Avoid duplicate security label restore on hostdev attach failure (rhbz#1035490)
  - qemu: Re-add hostdev interfaces to hostdev array on libvirtd restart (rhbz#1045002)
  - domain: Don't try to interpret <driver> as virtio config for hostdev interfaces (rhbz#1046337)
  - virBitmapParse: Fix behavior in case of error and fix up callers (rhbz#1047234)
  - qemu: Fix live pinning to memory node on NUMA system (rhbz#1047234)
  - qemu: Clean up qemuDomainSetNumaParameters (rhbz#1047234)
  - qemu: Range check numa memory placement mode (rhbz#1047234)
  - virkeycode: Allow ANSI_A (rhbz#1044806)
  - Fix argument order of qemuMigrationPerformJob(). (rhbz#1049338)
  - qemu: Do not access stale data in virDomainBlockStats (CVE-2013-6458)
  - qemu: Avoid using stale data in virDomainGetBlockInfo (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockJobImpl (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockCopy (rhbz#1048643)
  - qemu: Fix job usage in virDomainGetBlockIoTune (CVE-2013-6458)
  - PanicCheckABIStability: Need to check for existence (rhbz#996520)
  - virsh: Improve usability of '--print-xml' flag for attach-disk command (rhbz#1049529)
  - virsh: Don't use legacy API if --current is used on device hot(un)plug (rhbz#1049529)
  - virsh: Use inactive definition when removing disk from config (rhbz#1049529)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-19
changelog:
  - CVE-2013-6436: Fix crash in lxcDomainGetMemoryParameters (rhbz#1049137)
  - Fix crash in lxcDomainSetMemoryParameters (rhbz#1052062)
  - Don't crash if a connection closes early (CVE-2014-1447)
  - Really don't crash if a connection closes early (CVE-2014-1447)
  - qemu: Change the default unix monitor timeout (rhbz#892273)
  - virSecuritySELinuxSetFileconHelper: Don't fail on read-only NFS (rhbz#996543)
  - qemu: Avoid operations on NULL monitor if VM fails early (rhbz#1054785)
  - virt-login-shell: Fix regressions in behavior (rhbz#1015247)
  - pci: Make reattach work for unbound devices (rhbz#1046919)
  - pci: Fix failure paths in detach (rhbz#1046919)
  - qemu: Don't detach devices if passthrough doesn't work (rhbz#1046919)
  - Fix migration with QEMU 1.6 (rhbz#1053405)
  - build: More workarounds for if_bridge.h (rhbz#1042937)
  - build: Fix build with latest rawhide kernel headers (rhbz#1042937)
  - aarch64: Disable -fstack-protector. (rhbz#1042937)
  - AArch64: Parse cputopology from /proc/cpuinfo. (rhbz#1042937)
  - virDomainEventCallbackListFree: Don't leak @list->callbacks (rhbz#1047964)
  - Fix memory leak in virObjectEventCallbackListRemoveID() (rhbz#1047964)
  - event: Filter global events by domain:getattr ACL (CVE-2014-0028)
  - Doc: Improve the document for nodesuspend (rhbz#1045089)
  - Doc: Add "note" for node-memory-tune (rhbz#1045089)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-21
changelog:
  - util: Correct the NUMA node range checking (rhbz#1045958)
  - storage: Add document for possible problem on volume detection (rhbz#726797)
  - storage: Fix autostart of pool with "fc_host" type adapter (rhbz#726797)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-22
changelog:
  - Add a read/write lock implementation (rhbz#1034807)
  - Push nwfilter update locking up to top level (rhbz#1034807)
  - utils: Introduce functions for kernel module manipulation (rhbz#1045124)
  - virCommand: Introduce virCommandSetDryRun (rhbz#1045124)
  - tests: Add test for new virkmod functions (rhbz#1045124)
  - Honor blacklist for modprobe command (rhbz#1045124)
  - qemu: Be sure we're using the updated value of backend during hotplug (rhbz#1056360)
  - network: Permit upstream forwarding of unqualified DNS names (rhbz#1061099)
  - network: Only prevent forwarding of DNS requests for unqualified names (rhbz#1061099)
  - network: Change default of forwardPlainNames to 'yes' (rhbz#1061099)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-23
changelog:
  - Generate a valid imagelabel even for type 'none' (rhbz#1061657)
  - qemu: keep pre-migration domain state after failed migration (rhbz#1057407)
  - schema: Fix guest timer specification schema according to the docs (rhbz#1056205)
  - conf: Enforce supported options for certain timers (rhbz#1056205)
  - qemu: hyperv: Add support for timer enlightenments (rhbz#1056205)
  - build: correctly check for SOICGIFVLAN GET_VLAN_VID_CMD command (rhbz#1062665)
  - util: Add "shareable" field for virSCSIDevice struct (rhbz#957292)
  - util: Fix the indention (rhbz#957292)
  - qemu: Don't fail if the SCSI host device is shareable between domains (rhbz#957292)
  - util: Add one argument for several scsi utils (rhbz#957292)
  - tests: Add tests for scsi utils (rhbz#957292)
  - qemu: Fix the error message for scsi host device's shareable checking (rhbz#957292)
  - util: Accept test data path for scsi device's sg_path (rhbz#957292)
  - tests: Modify the scsi util tests (rhbz#957292)
  - event: move event filtering to daemon (regression fix) (rhbz#1047964)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-24
changelog:
  - Block info query: Add check for transient domain (rhbz#1065531)
  - Fix minor typos in messages and docs (rhbz#1045643)
  - LXC: Free variable vroot in lxcDomainDetachDeviceHostdevUSBLive() (rhbz#1045643)
  - LXC: free dst before lxcDomainAttachDeviceDiskLive returns (rhbz#1045643)
  - maint: fix comment typos (rhbz#1045643)
  - storage: avoid short reads while chasing backing chain (rhbz#1045643)
  - Don't block use of USB with containers (rhbz#1045643)
  - Fix path used for USB device attach with LXC (rhbz#1045643)
  - Record hotplugged USB device in LXC live guest config (rhbz#1045643)
  - Fix reset of cgroup when detaching USB device from LXC guests (rhbz#1045643)
  - Disks are always block devices, never character devices (rhbz#1045643)
  - Move check for cgroup devices ACL upfront in LXC hotplug (rhbz#1045643)
  - Add virFileMakeParentPath helper function (rhbz#1045643)
  - Add helper for running code in separate namespaces (rhbz#1045643)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC shutdown/reboot code (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC disk hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC USB hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC block hostdev hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC chardev hostdev hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC hotunplug code (CVE-2013-6456)
  - Ignore additional fields in iscsiadm output (rhbz#1067173)
  - qemuBuildNicDevStr: Set vectors= on Multiqueue (rhbz#1066209)
  - Don't depend on syslog.service (rhbz#1032695)
  - libvirt-guests: Run only after libvirtd (rhbz#1032695)
  - virSystemdCreateMachine: Set dependencies for slices (rhbz#1032695)
  - libvirt-guests: Wait for libvirtd to initialize (rhbz#1032695)
  - virNetServerRun: Notify systemd that we're accepting clients (rhbz#1032695)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-25
changelog:
  - maint: fix comma style issues: conf (rhbz#1032370)
  - Allow <source> for type=block to have no dev (rhbz#1032370)
  - Allow LUN type disks to have no source (rhbz#1032370)
  - virsh-volume: Unify strigification of volume type (rhbz#1032370)
  - conf: Refactor virDomainDiskSourcePoolDefParse (rhbz#1032370)
  - conf: Split out code to parse the source of a disk definition (rhbz#1032370)
  - conf: Rename virDomainDiskHostDefFree to virDomainDiskHostDefClear (rhbz#1032370)
  - conf: Refactor virDomainDiskSourceDefParse (rhbz#1032370)
  - storage: fix RNG validation of gluster via netfs (rhbz#1032370)
  - maint: fix comment typos. (rhbz#1032370)
  - storage: use valid XML for awkward volume names (rhbz#1032370)
  - build: Don't fail on '&lt; ' or '&gt; ' with old xmllint (rhbz#1032370)
  - storage: allow interleave in volume XML (rhbz#1032370)
  - storage: expose volume meta-type in XML (rhbz#1032370)
  - storage: initial support for linking with libgfapi (rhbz#1032370)
  - storage: document existing pools (rhbz#1032370)
  - storage: document gluster pool (rhbz#1032370)
  - storage: implement rudimentary glusterfs pool refresh (rhbz#1032370)
  - storage: add network-dir as new storage volume type (rhbz#1032370)
  - storage: improve directory support in gluster pool (rhbz#1032370)
  - storage: improve allocation stats reported on gluster files (rhbz#1032370)
  - storage: improve handling of symlinks in gluster (rhbz#1032370)
  - storage: probe qcow2 volumes in gluster pool (rhbz#1032370)
  - storage: fix typo in previous patch (rhbz#1032370)
  - conf: Export virStorageVolType enum helper functions (rhbz#1032370)
  - test: Implement fake storage pool driver in qemuxml2argv test (rhbz#1032370)
  - storage: reduce number of stat calls (rhbz#1032370)
  - storage: use simpler 'char *' (rhbz#1032370)
  - storage: refactor backing chain division of labor (rhbz#1032370)
  - storage: always probe type with buffer (rhbz#1032370)
  - storage: don't read storage volumes in nonblock mode (rhbz#1032370)
  - storage: skip selinux cleanup when fd not available (rhbz#1032370)
  - storage: use correct type for array count (rhbz#1032370)
  - storage: allow interleave in pool XML (rhbz#1032370)
  - qemuxml2argv: Add test to verify correct usage of disk type="volume" (rhbz#1032370)
  - qemuxml2argv: Add test for disk type='volume' with iSCSI pools (rhbz#1032370)
  - tests: Fix comment for fake storage pool driver (rhbz#1032370)
  - conf: Support disk source formatting without needing a virDomainDiskDefPtr (rhbz#1032370)
  - conf: Clean up virDomainDiskSourceDefFormatInternal (rhbz#1032370)
  - conf: Split out seclabel formating code for disk source (rhbz#1032370)
  - conf: Export disk source formatter and parser (rhbz#1032370)
  - snapshot: conf: Use common parsing and formatting functions for source (rhbz#1032370)
  - snapshot: conf: Fix NULL dereference when <driver> element is empty (rhbz#1032370)
  - conf: Add functions to copy and free network disk source definitions (rhbz#1032370)
  - qemu: snapshot: Detect internal snapshots also for sheepdog and RBD (rhbz#1032370)
  - conf: Add helper do clear disk source authentication struct (rhbz#1032370)
  - qemu: snapshot: Touch up error message (rhbz#1032370)
  - qemu: snapshot: Add functions similar to disk source pool translation (rhbz#1032370)
  - qemu: Refactor qemuTranslateDiskSourcePool (rhbz#1032370)
  - qemu: Split out formatting of network disk source URI (rhbz#1032370)
  - qemu: Simplify call pattern of qemuBuildDriveURIString (rhbz#1032370)
  - qemu: Use qemuBuildNetworkDriveURI to handle http/ftp and friends (rhbz#1032370)
  - qemu: Migrate sheepdog source generation into common function (rhbz#1032370)
  - qemu: Split out NBD command generation (rhbz#1032370)
  - qemu: Unify formatting of RBD sources (rhbz#1032370)
  - qemu: Refactor disk source string formatting (rhbz#1032370)
  - qemu: Clear old translated pool source (rhbz#1032370)
  - qemu: snapshots: Declare supported and unsupported snapshot configs (rhbz#1032370)
  - domainsnapshotxml2xmltest: Clean up labels and use bool instead of int (rhbz#1032370)
  - domainsnapshotxml2xmltest: Allow for better testing of snapshots (rhbz#1032370)
  - domainsnapshotxml2xml: Move files with conflicting names (rhbz#1032370)
  - domainsnapshotxml2xmltest: Add existing files as new tests (rhbz#1032370)
  - domainsnapshotxml2xmltest: Add test case for empty driver element (rhbz#1032370)
  - qemu: Fix indentation in qemuTranslateDiskSourcePool (rhbz#1032370)
  - qemu: snapshot: Fix incorrect disk type for auto-generated disks (rhbz#1032370)
  - storage: fix omitted slash in gluster volume URI (rhbz#1032370)
  - virsh: domain: Fix undefine with storage of 'volume' disks (rhbz#1032370)
  - snapshot: schema: Split out snapshot disk driver definition (rhbz#1032370)
  - storage: Add gluster pool filter and fix virsh pool listing (rhbz#1032370)
  - storage: fix bogus target in gluster volume xml (rhbz#1032370)
  - storage: Improve error message when a storage backend is missing (rhbz#1032370)
  - storage: Break long lines and clean up spaces in storage backend header (rhbz#1032370)
  - storage: Support deletion of volumes on gluster pools (rhbz#1032370)
  - qemu: snapshot: Avoid libvirtd crash when qemu crashes while snapshotting (rhbz#1032370)
  - qemu: snapshot: Forbid snapshots when backing is a scsi passthrough disk (rhbz#1034993)
  - qemu: Avoid crash in qemuDiskGetActualType (rhbz#1032370)
  - snapshot: Add support for specifying snapshot disk backing type (rhbz#1032370)
  - conf: Move qemuDiskGetActualType to virDomainDiskGetActualType (rhbz#1032370)
  - conf: Move qemuSnapshotDiskGetActualType to virDomainSnapshotDiskGetActualType (rhbz#1032370)
  - storage: Add file storage APIs in the default storage driver (rhbz#1032370)
  - storage: add file functions for local and block files (rhbz#1032370)
  - storage: Add storage file backends for gluster (rhbz#1032370)
  - qemu: Switch snapshot deletion to the new API functions (rhbz#1032370)
  - qemu: snapshot: Use new APIs to detect presence of existing storage files (rhbz#1032370)
  - qemu: snapshot: Add support for external active snapshots on gluster (rhbz#1032370)
  - storage: Fix build with older compilers afeter gluster snapshot series (rhbz#1032370)
  - storage: gluster: Don't leak private data when storage file init fails (rhbz#1032370)
  - spec: Use correct versions of libgfapi in RHEL builds (rhbz#1032370)
  - spec: Fix braces around macros (rhbz#1032370)
  - build: use --with-systemd-daemon as configure option (rhbz#1032695)
  - spec: require device-mapper-devel for storage-disk (rhbz#1032695)
  - spec: make systemd_daemon usage configurable (rhbz#1032695)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-26
changelog:
  - virNetDevVethCreate: Serialize callers (rhbz#1014604)
  - qemuBuildNicDevStr: Adapt to new advisory on multiqueue (rhbz#1071888)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-27
changelog:
  - spec: Let translations be properly updated (rhbz#1030368)
  - Update translation to supported languages (rhbz#1030368)
  - Add a mutex to serialize updates to firewall (rhbz#1074003)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-28
changelog:
  - qemu: Forbid "sgio" support for SCSI generic host device (rhbz#957292)
  - qemu: monitor: Fix invalid parentheses (rhbz#1075973)
  - qemu: Introduce qemuDomainDefCheckABIStability (rhbz#1076503)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-29
changelog:
  - nwfilter: Increase buffer size for libpcap (rhbz#1078347)
  - nwfilter: Display pcap's error message when pcap setup fails (rhbz#1078347)
  - nwfilter: Fix double free of pointer (rhbz#1071181)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.7-1
changelog:
  - Rebased to libvirt-1.2.7 (rhbz#1035158)
  - The rebase also fixes the following bugs:
      rhbz#823535, rhbz#872628, rhbz#874418, rhbz#878394, rhbz#880483
      rhbz#921094, rhbz#963817, rhbz#964177, rhbz#967493, rhbz#967494
      rhbz#972964, rhbz#983350, rhbz#985782, rhbz#985980, rhbz#990319
      rhbz#990418, rhbz#991290, rhbz#992980, rhbz#994731, rhbz#995377
      rhbz#997627, rhbz#997802, rhbz#1006700, rhbz#1007698, rhbz#1007759
      rhbz#1010885, rhbz#1022874, rhbz#1023366, rhbz#1025407, rhbz#1027076
      rhbz#1029266, rhbz#1029732, rhbz#1032363, rhbz#1033020, rhbz#1033398
      rhbz#1033704, rhbz#1035128, rhbz#1046192, rhbz#1049038, rhbz#1052114
      rhbz#1056902, rhbz#1062142, rhbz#1063837, rhbz#1066280, rhbz#1066894
      rhbz#1067338, rhbz#1069552, rhbz#1069784, rhbz#1070680, rhbz#1072141
      rhbz#1072677, rhbz#1073368, rhbz#1073506, rhbz#1074086, rhbz#1075290
      rhbz#1075299, rhbz#1076957, rhbz#1076959, rhbz#1076960, rhbz#1076962
      rhbz#1077009, rhbz#1077572, rhbz#1078590, rhbz#1079162, rhbz#1079173
      rhbz#1080859, rhbz#1081881, rhbz#1081932, rhbz#1082124, rhbz#1083345
      rhbz#1084360, rhbz#1085706, rhbz#1085769, rhbz#1086121, rhbz#1086331
      rhbz#1086704, rhbz#1087104, rhbz#1087671, rhbz#1088293, rhbz#1088667
      rhbz#1088787, rhbz#1088864, rhbz#1089179, rhbz#1089378, rhbz#1091132
      rhbz#1091866, rhbz#1092038, rhbz#1092253, rhbz#1093127, rhbz#1095035
      rhbz#1097028, rhbz#1097503, rhbz#1097677, rhbz#1097968, rhbz#1098659
      rhbz#1099978, rhbz#1100086, rhbz#1100769, rhbz#1101059, rhbz#1101510
      rhbz#1101987, rhbz#1101999, rhbz#1102426, rhbz#1102457, rhbz#1102611
      rhbz#1104992, rhbz#1104993, rhbz#1105939, rhbz#1108593, rhbz#1110198
      rhbz#1110212, rhbz#1110673, rhbz#1111044, rhbz#1112939, rhbz#1113332
      rhbz#1113668, rhbz#1113751, rhbz#1113868, rhbz#1118710, rhbz#1119206
      rhbz#1119387, rhbz#1119592, rhbz#1120474, rhbz#1122255, rhbz#1122973
  - spec: Enable qemu driver for RHEL-7 on ppc64 (rhbz#1120474)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-1
changelog:
  - Rebased to libvirt-1.2.8 (rhbz#1035158)
  - The rebase also fixes the following bugs:
      rhbz#927369, rhbz#957293, rhbz#999926, rhbz#1021703, rhbz#1043735
      rhbz#1047818, rhbz#1062142, rhbz#1064770, rhbz#1072653, rhbz#1078126
      rhbz#1095636, rhbz#1103245, rhbz#1119215, rhbz#1121837, rhbz#1121955
      rhbz#1122455, rhbz#1126329, rhbz#1126721, rhbz#1126909, rhbz#1128097
      rhbz#1128751, rhbz#1129207, rhbz#1129372, rhbz#1129998, rhbz#1130089
      rhbz#1130379, rhbz#1131306, rhbz#1131445, rhbz#1131788, rhbz#1131811
      rhbz#1131819, rhbz#1131876, rhbz#1132301, rhbz#1132305, rhbz#1132347


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-2
changelog:
  - remote: Fix memory leak on error path when deserializing bulk stats (rhbz#1136350)
  - spec: Fix preun script for daemon (rhbz#1136736)
  - security: fix DH key generation when FIPS mode is on (rhbz#1128497)
  - tests: force FIPS testing mode with new enough GNU TLS versions (rhbz#1128497)
  - Don't include non-migratable features in host-model (rhbz#1138221)
  - qemu: Rename DEFAULT_JOB_MASK to QEMU_DEFAULT_JOB_MASK (rhbz#1134154)
  - qemu: snapshot: Fix job handling when creating snapshots (rhbz#1134154)
  - qemu: snapshot: Acquire job earlier on snapshot revert/delete (rhbz#1134154)
  - qemu: snapshot: Fix snapshot function header formatting and spacing (rhbz#1134154)
  - qemu: snapshot: Simplify error paths (rhbz#1134154)
  - qemu: Propagate QEMU errors during incoming migrations (rhbz#1090093)
  - Refactor job statistics (rhbz#1063724)
  - qemu: Avoid incrementing jobs_queued if virTimeMillisNow fails (rhbz#1063724)
  - Add support for fetching statistics of completed jobs (rhbz#1063724)
  - qemu: Silence coverity on optional migration stats (rhbz#1063724)
  - virsh: Add support for completed job stats (rhbz#1063724)
  - qemu: Transfer migration statistics to destination (rhbz#1063724)
  - qemu: Recompute downtime and total time when migration completes (rhbz#1063724)
  - qemu: Transfer recomputed stats back to source (rhbz#1063724)
  - conf: Extend <loader/> and introduce <nvram/> (rhbz#1112257)
  - qemu: Implement extended loader and nvram (rhbz#1112257)
  - qemu: Automatically create NVRAM store (rhbz#1112257)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-3
changelog:
  - virsh: Move --completed from resume to domjobinfo (rhbz#1063724)
  - qemu_driver: Resolve Coverity COPY_PASTE_ERROR (rhbz#1141209)
  - virfile: Resolve Coverity DEADCODE (rhbz#1141209)
  - lxc: Resolve Coverity FORWARD_NULL (rhbz#1141209)
  - qemu: Resolve Coverity FORWARD_NULL (rhbz#1141209)
  - qemu: Resolve Coverity FORWARD_NULL (rhbz#1141209)
  - xen: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - qemu: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - qemu: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - virsh: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - daemon: Resolve Coverity RESOURCE_LEAK (rhbz#1141209)
  - domain_conf: Resolve Coverity COPY_PASTE_ERROR (rhbz#1141209)
  - storage_conf: Fix libvirtd crash when defining scsi storage pool (rhbz#1141943)
  - qemu: time: Report errors if agent command fails (rhbz#1142294)
  - util: storage: Copy driver type when initializing chain element (rhbz#1140984)
  - docs, conf, schema: add support for shared memory mapping (rhbz#1133144)
  - qemu: add support for shared memory mapping (rhbz#1133144)
  - rpc: reformat the flow to make a bit more sense (rhbz#927369)
  - remove redundant pidfile path constructions (rhbz#927369)
  - util: fix potential leak in error codepath (rhbz#927369)
  - util: get rid of unnecessary umask() call (rhbz#927369)
  - rpc: make daemon spawning a bit more intelligent (rhbz#927369)
  - conf: add backend element to interfaces (rhbz#1139362)
  - Wire up the interface backend options (rhbz#1139362)
  - CVE-2014-3633: qemu: blkiotune: Use correct definition when looking up disk (CVE-2014-3633)
  - qemu: fix crash with shared disks (rhbz#1142722)
  - nvram: Fix permissions (rhbz#1026772)
  - libvirt.spec: Fix permission even for libvirt-driver-qemu (rhbz#1026772)
  - virDomainUndefineFlags: Allow NVRAM unlinking (rhbz#1026772)
  - formatdomain: Update <loader/> example to match the rest (rhbz#1026772)
  - domaincaps: Expose UEFI capability (rhbz#1026772)
  - qemu_capabilities: Change virQEMUCapsFillDomainCaps signature (rhbz#1026772)
  - domaincaps: Expose UEFI binary path, if it exists (rhbz#1026772)
  - domaincapstest: Run cleanly on systems missing OVMF firmware (rhbz#1026772)
  - conf: Disallow nonexistent NUMA nodes for hugepages (rhbz#1135396)
  - qemu: Honor hugepages for UMA domains (rhbz#1135396)
  - RHEL: Fix maxvcpus output (rhbz#1092363)
  - virsh: Add iothread to 'attach-disk' (rhbz#1101574)
  - qemu: Issue query-iothreads and to get list of active IOThreads (rhbz#1101574)
  - vircgroup: Introduce virCgroupNewIOThread (rhbz#1101574)
  - qemu_domain: Add niothreadpids and iothreadpids (rhbz#1101574)
  - qemu_cgroup: Introduce cgroup functions for IOThreads (rhbz#1101574)
  - qemu: Allow pinning specific IOThreads to a CPU (rhbz#1101574)
  - domain_conf: Add iothreadpin to cputune (rhbz#1101574)
  - vircgroup: Fix broken builds without cgroups (rhbz#1101574)
  - cputune: allow interleaved xml (rhbz#1101574)
  - qemu: Fix iothreads issue (rhbz#1101574)
  - qemu_cgroup: Adjust spacing around incrementor (rhbz#1101574)
  - qemu: Fix call in qemuDomainSetNumaParamsLive for virCgroupNewIOThread (rhbz#1101574)
  - qemu: Need to check for capability before query (rhbz#1101574)
  - qemu: Don't fail startup/attach for IOThreads if no JSON (rhbz#1101574)
  - Fixes for domains with no iothreads (rhbz#1101574)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-4
changelog:
  - Fix libvirtd crash when removing metadata (rhbz#1143955)
  - Fix leak in x86UpdateHostModel (rhbz#1144303)
  - Move the FIPS detection from capabilities (rhbz#1135431)
  - qemu: raise an error when trying to use readonly sata disks (rhbz#1112939)
  - virsh-host: fix pagesize unit of freepages (rhbz#1145048)
  - nodeinfo: report error when given node is out of range (rhbz#1145050)
  - Fix typo of virNodeGetFreePages comment (rhbz#1145050)
  - nodeinfo: Prefer MIN in nodeGetFreePages (rhbz#1145050)
  - Fix bug with loading bridge name for active domain during libvirtd start (rhbz#1140085)
  - qemu: save image: Split out user provided XML checker (rhbz#1142693)
  - qemu: save image: Add possibility to return XML stored in the image (rhbz#1142693)
  - qemu: save image: Split out new definition check/update (rhbz#1142693)
  - qemu: save image: Split out checks done only when editing the save img (rhbz#1142693)
  - qemu: hook: Provide hook when restoring a domain save image (rhbz#1142693)
  - qemu: Expose additional migration statistics (rhbz#1013055)
  - qemu: Fix old tcp:host URIs more cleanly (rhbz#1013055)
  - qemu: Prepare support for arbitrary migration protocol (rhbz#1013055)
  - qemu: Add RDMA migration capabilities (rhbz#1013055)
  - qemu: RDMA migration support (rhbz#1013055)
  - qemu: Memory pre-pinning support for RDMA migration (rhbz#1013055)
  - qemu: Fix memory leak in RDMA migration code (rhbz#1013055)
  - schemas: finish virTristate{Bool, Switch} transition (rhbz#1139364)
  - conf: split out virtio net driver formatting (rhbz#1139364)
  - conf: remove redundant local variable (rhbz#1139364)
  - conf: add options for disabling segment offloading (rhbz#1139364)
  - qemu: wire up virtio-net segment offloading options (rhbz#1139364)
  - spec: Enable qemu driver for RHEL-7 on aarch64 (rhbz#1142448)
  - blkdeviotune: fix bug with saving values into live XML (rhbz#1146511)
  - security: Fix labelling host devices (rhbz#1146550)
  - qemu: Add missing goto on rawio (rhbz#1103739)
  - hostdev: Add "rawio" attribute to _virDomainHostdevSubsysSCSI (rhbz#1103739)
  - qemu: Process the hostdev "rawio" setting (rhbz#1103739)
  - util: Add function to check if a virStorageSource is "empty" (rhbz#1138231)
  - util: storage: Allow metadata crawler to report useful errors (rhbz#1138231)
  - qemu: Sanitize argument names and empty disk check in qemuDomainDetermineDiskChain (rhbz#1138231)
  - qemu: Report better errors from broken backing chains (rhbz#1138231)
  - storage: Improve error message when traversing backing chains (rhbz#1138231)
  - qemu: Always re-detect backing chain (rhbz#1144922)
  - event: introduce new event for tunable values (rhbz#1115898)
  - tunable_event: extend debug message and tweak limit for remote message (rhbz#1115898)
  - add an example how to use tunable event (rhbz#1115898)
  - Fix MinGW build (rhbz#1115898)
  - event_example: cleanup example code for tunable event (rhbz#1115898)
  - cputune_event: queue the event for cputune updates (rhbz#1115898)
  - blkdeviotune: trigger tunable event for blkdeviotune updates (rhbz#1115898)
  - Rename tunable event constants (rhbz#1115898)
  - Fix typo s/EMULATORIN/EMULATORPIN/ (rhbz#1115898)
  - Check for NULL in qemu monitor event filter (rhbz#1144920)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-5
changelog:
  - qemuPrepareNVRAM: Save domain after NVRAM path generation (rhbz#1026772)
  - Fix crash cpu_shares change event crash on domain startup (rhbz#1147494)
  - Don't verify CPU features with host-passthrough (rhbz#1147584)
  - Also filter out non-migratable features out of host-passthrough (rhbz#1147584)
  - selinux: Avoid label reservations for type = none (rhbz#1138487)
  - qemu: bulk stats: extend internal collection API (rhbz#1113116)
  - qemu: bulk stats: implement CPU stats group (rhbz#1113116)
  - qemu: bulk stats: implement balloon group (rhbz#1113116)
  - qemu: bulk stats: implement VCPU group (rhbz#1113116)
  - qemu: bulk stats: implement interface group (rhbz#1113116)
  - qemu: bulk stats: implement block group (rhbz#1113116)
  - virsh: add options to query bulk stats group (rhbz#1113116)
  - lib: De-duplicate stats group documentation for all stats functions (rhbz#1113116)
  - lib: Document that virConnectGetAllDomainStats may omit some stats fields (rhbz#1113116)
  - man: virsh: Add docs for supported stats groups (rhbz#1113116)
  - qemu: monitor: return block stats data as a hash to avoid disk mixup (rhbz#1113116)
  - qemu: monitor: Avoid shadowing variable "devname" on FreeBSD (rhbz#1113116)
  - qemu: monitor: Add helper function to fill physical/virtual image size (rhbz#1113116)
  - qemu: bulk stats: add block allocation information (rhbz#1113116)
  - qemu: json: Fix missing break in error reporting function (rhbz#1113116)
  - qemu: monitor: Avoid shadowing variable "devname" on FreeBSD. Again. (rhbz#1113116)
  - docs, conf, schema: add support for shmem device (rhbz#1126991)
  - qemu: add capability probing for ivshmem device (rhbz#1126991)
  - qemu: Build command line for ivshmem device (rhbz#1126991)
  - minor shmem clean-ups (rhbz#1126991)
  - virSecuritySELinuxSetTapFDLabel: Temporarily revert to old behavior (rhbz#1095636)
  - domain_conf: fix domain deadlock (CVE-2014-3657)
  - qemu: support relative backing for RHEL 7.0.z qemu (rhbz#1150322)
  - qemu: Fix hot unplug of SCSI_HOST device (rhbz#1141732)
  - qemu: Remove need for virConnectPtr in hotunplug detach host, net (rhbz#1141732)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-6
changelog:
  - qemu: support nospace reason in io error event (rhbz#1119784)
  - RHEL: Add support for QMP I/O error reason (rhbz#1119784)
  - nodeinfo: fix nodeGetFreePages when max node is zero (rhbz#1145048)
  - nodeGetFreePages: Push forgotten change (rhbz#1145048)
  - conf: tests: fix virDomainNetDefFormat for vhost-user in client mode (rhbz#1155458)
  - util: string: Add helper to check whether string is empty (rhbz#1142693)
  - qemu: restore: Fix restoring of VM when the restore hook returns empty XML (rhbz#1142693)
  - security_selinux: Don't relabel /dev/net/tun (rhbz#1095636)
  - qemu: Fix updating bandwidth limits in live XML (rhbz#1146511)
  - qemu: save domain status after set the blkio parameters (rhbz#1146511)
  - qemu: call qemuDomainObjBeginJob/qemuDomainObjEndJob in qemuDomainSetInterfaceParameters (rhbz#1146511)
  - qemu: save domain status after set domain's numa parameters (rhbz#1146511)
  - qemu: forbid snapshot-delete --children-only on external snapshot (rhbz#956506)
  - qemu: better error message when block job can't succeed (rhbz#1140981)
  - Reject live update of offloading options (rhbz#1155441)
  - virutil: Introduce virGetSCSIHostNumber (rhbz#1146837)
  - virutil: Introduce virGetSCSIHostNameByParentaddr (rhbz#1146837)
  - storage_conf: Resolve libvirtd crash matching scsi_host (rhbz#1146837)
  - Match scsi_host pools by parent address first (rhbz#1146837)
  - Relax duplicate SCSI host pool checking (rhbz#1146837)
  - qemu: Remove possible NULL deref in debug output (rhbz#1141621)
  - virsh: Adjust the text in man page regarding qemu-attach (rhbz#1141621)
  - hotplug: Check for alias in controller detach (rhbz#1141621)
  - hotplug: Check for alias in disk detach (rhbz#1141621)
  - hotplug: Check for alias in hostdev detach (rhbz#1141621)
  - hotplug: Check for alias in chrdev detach (rhbz#1141621)
  - hotplug: Check for alias in net detach (rhbz#1141621)
  - qemu-attach: Assign device aliases (rhbz#1141621)
  - hotplug: fix char device detach (rhbz#1141621)
  - storage: Fix crash when parsing backing store URI with schema (rhbz#1156288)
  - remote: fix jump depends on uninitialised value (rhbz#1158715)
  - qemu: Release nbd port from migrationPorts instead of remotePorts (rhbz#1159245)
  - conf: add trustGuestRxFilters attribute to network and domain interface (rhbz#848199)
  - network: set interface actual trustGuestRxFilters from network/portgroup (rhbz#848199)
  - util: define virNetDevRxFilter and basic utility functions (rhbz#848199)
  - qemu: qemuMonitorQueryRxFilter - retrieve guest netdev rx-filter (rhbz#848199)
  - qemu: add short document on qemu event handlers (rhbz#848199)
  - qemu: setup infrastructure to handle NIC_RX_FILTER_CHANGED event (rhbz#848199)
  - qemu: change macvtap device MAC address in response to NIC_RX_FILTER_CHANGED (rhbz#848199)
  - util: Functions to update host network device's multicast filter (rhbz#848199)
  - qemu: change macvtap multicast list in response to NIC_RX_FILTER_CHANGED (rhbz#848199)
  - virnetdev: Resolve Coverity DEADCODE (rhbz#848199)
  - virnetdev: Resolve Coverity FORWARD_NULL (rhbz#848199)
  - virnetdev: Resolve Coverity RESOURCE_LEAK (rhbz#848199)
  - lxc: improve error message for invalid blkiotune settings (rhbz#1131306)
  - qemu: improve error message for invalid blkiotune settings (rhbz#1131306)
  - Do not probe for power mgmt capabilities in lxc emulator (rhbz#1159227)
  - qemu: make advice from numad available when building commandline (rhbz#1138545)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-7
changelog:
  - qemu: avoid rare race when undefining domain (rhbz#1150505)
  - qemu: stop NBD server after successful migration (rhbz#1160212)
  - Require at least one console for LXC domain (rhbz#1155410)
  - remote: Fix memory leak in remoteConnectGetAllDomainStats (rhbz#1158715)
  - CVE-2014-7823: dumpxml: security hole with migratable flag (CVE-2014-7823)
  - Free job statistics from the migration cookie (rhbz#1161124)
  - Fix virDomainChrEquals for spicevmc (rhbz#1162097)
  - network: fix call virNetworkEventLifecycleNew when networkStartNetwork fail (rhbz#1162915)
  - Do not crash on gluster snapshots with no host name (rhbz#1162974)
  - nwfilter: fix deadlock caused updating network device and nwfilter (rhbz#1143780)
  - util: eliminate "use after free" in callers of virNetDevLinkDump (rhbz#1163463)
  - storage: Check for valid fc_host parent at startup (rhbz#1160565)
  - storage: Ensure fc_host parent matches wwnn/wwpn (rhbz#1160565)
  - storage: Don't use a stack copy of the adapter (rhbz#1160926)
  - storage: Introduce virStoragePoolSaveConfig (rhbz#1160926)
  - storage: Introduce 'managed' for the fchost parent (rhbz#1160926)
  - qemu: Always set migration capabilities (rhbz#1163953)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-8
changelog:
  - qemu: Fix crash in tunnelled migration (rhbz#1147331)
  - qemu: Really fix crash in tunnelled migration (rhbz#1147331)
  - qemu: Update fsfreeze status on domain state transitions (rhbz#1160084)
  - qemuPrepareNVRAM: Save domain conf only if domain's persistent (rhbz#1026772)
  - docs: Document NVRAM behavior on transient domains (rhbz#1026772)
  - Fix build in qemu_capabilities (rhbz#1165782)
  - qemu: Support OVMF on armv7l aarch64 guests (rhbz#1165782)
  - qemu: Drop OVMF whitelist (rhbz#1165782)
  - storage: Fix issue finding LU's when block doesn't exist (rhbz#1152382)
  - storage: Add thread to refresh for createVport (rhbz#1152382)
  - storage: qemu: Fix security labelling of new image chain elements (rhbz#1151718)
  - virsh: sync domdisplay help and manual (rhbz#997802)
  - docs: domain: Move docs for storage hosts under the <source> element (rhbz#1164528)
  - test: virstoragetest: Add testing of network disk details (rhbz#1164528)
  - util: storage: Copy hosts of a storage file only if they exist (rhbz#1164528)
  - qemu: Refactor qemuBuildNetworkDriveURI to take a virStorageSourcePtr (rhbz#1164528)
  - tests: Reflow the expected output from RBD disk test (rhbz#1164528)
  - util: split out qemuParseRBDString into a common helper (rhbz#1164528)
  - util: storagefile: Split out parsing of NBD string into a separate func (rhbz#1164528)
  - storage: Allow parsing of RBD backing strings when building backing chain (rhbz#1164528)
  - storage: rbd: qemu: Add support for specifying internal RBD snapshots (rhbz#1164528)
  - storage: rbd: Implement support for passing config file option (rhbz#1164528)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-9
changelog:
  - doc: fix mismatched ACL attribute name (rhbz#1161358)
  - qemu: monitor: Rename and improve qemuMonitorGetPtyPaths (rhbz#1146944)
  - conf: Add channel state for virtio channels to the XML (rhbz#1146944)
  - qemu: Add handling for VSERPORT_CHANGE event (rhbz#1146944)
  - qemu: chardev: Extract more information about character devices (rhbz#1146944)
  - qemu: process: Refresh virtio channel guest state when connecting to mon (rhbz#1146944)
  - event: Add guest agent lifecycle event (rhbz#1146944)
  - examples: Add support for the guest agent lifecycle event (rhbz#1146944)
  - qemu: Emit the guest agent lifecycle event (rhbz#1146944)
  - internal: add macro to round value to the next closest power of 2 (rhbz#1076098)
  - video: cleanup usage of vram attribute and update documentation (rhbz#1076098)
  - QXL: fix setting ram and vram values for QEMU QXL device (rhbz#1076098)
  - caps: introduce new QEMU capability for vgamem_mb device property (rhbz#1076098)
  - qemu-command: use vram attribute for all video devices (rhbz#1076098)
  - qemu-command: introduce new vgamem attribute for QXL video device (rhbz#1076098)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-10
changelog:
  - qemu: add the missing jobinfo type in qemuDomainGetJobInfo (rhbz#1167883)
  - network: Fix upgrade from libvirt older than 1.2.4 (rhbz#1167145)
  - qemu: fix domain startup failing with 'strict' mode in numatune (rhbz#1168866)
  - qemu: Don't track quiesced state of FSs (rhbz#1160084)
  - qemu: fix block{commit,copy} abort handling (rhbz#1135169)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-11
changelog:
  - virsh: vol-upload disallow negative offset (rhbz#1087104)
  - storage: fix crash caused by no check return before set close (rhbz#1087104)
  - qemu: Fix virsh freeze when blockcopy storage file is removed (rhbz#1139567)
  - security: Manage SELinux labels on shared/readonly hostdev's (rhbz#1082521)
  - nwfilter: fix crash when adding non-existing nwfilter (rhbz#1169409)
  - conf: Fix libvirtd crash matching hostdev XML (rhbz#1174053)
  - qemu: Resolve Coverity REVERSE_INULL (rhbz#1172570)
  - CVE-2014-8131: Fix possible deadlock and segfault in qemuConnectGetAllDomainStats() (CVE-2014-8131)
  - qemu: bulk stats: Fix logic in monitor handling (rhbz#1172570)
  - qemu: avoid rare race when undefining domain (rhbz#1150505)
  - Do not format CPU features without a model (rhbz#1151885)
  - Ignore CPU features without a model for host-passthrough (rhbz#1151885)
  - Silently ignore MAC in NetworkLoadConfig (rhbz#1156367)
  - Generate a MAC when loading a config instead of package update (rhbz#1156367)
  - qemu: move setting emulatorpin ahead of monitor showing up (rhbz#1170484)
  - util: Introduce flags field for macvtap creation (rhbz#1081461)
  - network: Bring netdevs online later (rhbz#1081461)
  - qemu: always call qemuInterfaceStartDevices() when starting CPUs (rhbz#1081461)
  - qemu: add a qemuInterfaceStopDevices(), called when guest CPUs stop (rhbz#1081461)
  - conf: replace call to virNetworkFree() with virObjectUnref() (rhbz#1099210)
  - util: new functions for setting bridge and bridge port attributes (rhbz#1099210)
  - util: functions to manage bridge fdb (forwarding database) (rhbz#1099210)
  - conf: new network bridge device attribute macTableManager (rhbz#1099210)
  - network: save bridge name in ActualNetDef when actualType==network too (rhbz#1099210)
  - network: store network macTableManager setting in NetDef actual object (rhbz#1099210)
  - network: setup bridge devices for macTableManager='libvirt' (rhbz#1099210)
  - qemu: setup tap devices for macTableManager='libvirt' (rhbz#1099210)
  - qemu: add/remove bridge fdb entries as guest CPUs are started/stopped (rhbz#1099210)
  - virsh: document block.n.allocation stat (rhbz#1041569)
  - getstats: avoid memory leak on OOM (rhbz#1041569)
  - getstats: improve documentation (rhbz#1041569)
  - getstats: start giving offline block stats (rhbz#1041569)
  - getstats: add block.n.path stat (rhbz#1041569)
  - qemuMonitorJSONBlockStatsUpdateCapacity: Don't skip disks (rhbz#1041569)
  - getstats: prepare monitor collection for recursion (rhbz#1041569)
  - getstats: perform recursion in monitor collection (rhbz#1041569)
  - getstats: prepare for dynamic block.count stat (rhbz#1041569)
  - getstats: add new flag for block backing chain (rhbz#1041569)
  - getstats: split block stats reporting for easier recursion (rhbz#1041569)
  - getstats: crawl backing chain for qemu (rhbz#1041569)
  - logical: Add "--type snapshot" to lvcreate command (rhbz#1166592)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-12
changelog:
  - Fix hotplugging of block device-backed usb disks (rhbz#1175668)
  - qemu: Create memory-backend-{ram, file} iff needed (rhbz#1175397)
  - conf: Don't format actual network definition in migratable XML (rhbz#1177194)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-13
changelog:
  - conf: Fix memory leak when parsing invalid network XML (rhbz#1180136)
  - qxl: change the default value for vgamem_mb to 16 MiB (rhbz#1181052)
  - qemuxml2argvtest: Fix test after change of qxl vgamem_mb default (rhbz#1181052)
  - conf: fix crash when hotplug a channel chr device with no target (rhbz#1181408)
  - qemu: forbid second blockcommit during active commit (rhbz#1135339)
  - qemu_monitor: introduce new function to get QOM path (rhbz#1180574)
  - qemu_process: detect updated video ram size values from QEMU (rhbz#1180574)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-14
changelog:
  - virNetworkDefUpdateIPDHCPHost: Don't crash when updating network (rhbz#1182486)
  - Format CPU features even for host-model (rhbz#1182448)
  - util: Add function virCgroupHasEmptyTasks (rhbz#1161540)
  - util: Add virNumaGetHostNodeset (rhbz#1161540)
  - qemu: Remove unnecessary qemuSetupCgroupPostInit function (rhbz#1161540)
  - qemu: Save numad advice into qemuDomainObjPrivate (rhbz#1161540)
  - qemu: Leave cpuset.mems in parent cgroup alone (rhbz#1161540)
  - qemu: Fix hotplugging cpus with strict memory pinning (rhbz#1161540)
  - util: Fix possible NULL dereference (rhbz#1161540)
  - qemu_driver: fix setting vcpus for offline domain (rhbz#1161540)
  - qemu: migration: Unlock vm on failed ACL check in protocol v2 APIs (CVE-2014-8136)
  - CVE-2015-0236: qemu: Check ACLs when dumping security info from save image (CVE-2015-0236)
  - CVE-2015-0236: qemu: Check ACLs when dumping security info from snapshots (CVE-2015-0236)
  - Check for domain liveness in qemuDomainObjExitMonitor (rhbz#1161024)
  - Mark the domain as active in qemuhotplugtest (rhbz#1161024)
  - Fix vmdef usage while in monitor in qemuDomainHotplugVcpus (rhbz#1161024)
  - Fix vmdef usage while in monitor in BlockStat* APIs (rhbz#1161024)
  - Fix vmdef usage while in monitor in qemu process (rhbz#1161024)
  - Fix vmdef usage after domain crash in monitor on device detach (rhbz#1161024)
  - Fix vmdef usage after domain crash in monitor on device attach (rhbz#1161024)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-16
changelog:
  - qemu: don't setup cpuset.mems if memory mode in numatune is not 'strict' (rhbz#1186094)
  - lxc: don't setup cpuset.mems if memory mode in numatune is not 'strict' (rhbz#1186094)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.13-1
changelog:
  - Rebased to libvirt-1.2.13 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#872028, rhbz#907779, rhbz#927252, rhbz#956891, rhbz#1073506
      rhbz#1079917, rhbz#1095637, rhbz#1123767, rhbz#1125764, rhbz#1126762
      rhbz#1130390, rhbz#1131919, rhbz#1132900, rhbz#1135442, rhbz#1138125
      rhbz#1138516, rhbz#1138539, rhbz#1140034, rhbz#1140960, rhbz#1141159
      rhbz#1143921, rhbz#1146334, rhbz#1147195, rhbz#1151942, rhbz#1152404
      rhbz#1152473, rhbz#1153891, rhbz#1155843, rhbz#1158034, rhbz#1158722
      rhbz#1159180, rhbz#1160559, rhbz#1160995, rhbz#1161831, rhbz#1164627
      rhbz#1165485, rhbz#1165993, rhbz#1168849, rhbz#1169183, rhbz#1170092
      rhbz#1170140, rhbz#1170492, rhbz#1171533, rhbz#1171582, rhbz#1172015
      rhbz#1172468, rhbz#1172526, rhbz#1173420, rhbz#1174096, rhbz#1174154
      rhbz#1174569, rhbz#1175123, rhbz#1175449, rhbz#1176503, rhbz#1176510
      rhbz#1177723, rhbz#1178652, rhbz#1178850, rhbz#1178853, rhbz#1178986
      rhbz#1179678, rhbz#1179684, rhbz#1179981, rhbz#1181182, rhbz#1182467
      rhbz#1183869, rhbz#1183890, rhbz#1185165, rhbz#1186175, rhbz#1186199
      rhbz#1186765, rhbz#1186886, rhbz#1188914, rhbz#1189007, rhbz#1190956
      rhbz#1191016, rhbz#1191227, rhbz#1191355, rhbz#1191567, rhbz#1195461
      rhbz#1196503, rhbz#1196528, rhbz#1204017


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.14-1
changelog:
  - Rebased to libvirt-1.2.14 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#790583, rhbz#853839, rhbz#872424, rhbz#921426, rhbz#952499
      rhbz#958510, rhbz#1070695, rhbz#1125755, rhbz#1127045, rhbz#1129198
      rhbz#1135491, rhbz#1140958, rhbz#1141119, rhbz#1142631, rhbz#1142636
      rhbz#1143832, rhbz#1155887, rhbz#1161461, rhbz#1163553, rhbz#1164053
      rhbz#1166024, rhbz#1171484, rhbz#1173468, rhbz#1174147, rhbz#1176050
      rhbz#1177219, rhbz#1177237, rhbz#1179533, rhbz#1181062, rhbz#1187012
      rhbz#1187533, rhbz#1190590, rhbz#1196185, rhbz#1196644, rhbz#1196934
      rhbz#1197600, rhbz#1199036, rhbz#1199182, rhbz#1206365, rhbz#1206406
      rhbz#1206987, rhbz#1207122, rhbz#1207937
  - RHEL: Hack around changed Broadwell/Haswell CPUs (rhbz#1199446)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.15-1
changelog:
  - Rebased to libvirt-1.2.15 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#858147, rhbz#890606, rhbz#1043436, rhbz#1073305, rhbz#1076708
      rhbz#1084876, rhbz#1147847, rhbz#1161617, rhbz#1165119, rhbz#1168530
      rhbz#1171933, rhbz#1177062, rhbz#1177733, rhbz#1181465, rhbz#1192318
      rhbz#1200634, rhbz#1202606, rhbz#1202704, rhbz#1203628, rhbz#1203931
      rhbz#1206114, rhbz#1206479, rhbz#1206521, rhbz#1206625, rhbz#1207257
      rhbz#1208009, rhbz#1208176, rhbz#1208434, rhbz#1208763, rhbz#1209312
      rhbz#1209394, rhbz#1209813, rhbz#1210159, rhbz#1210545, rhbz#1210650
      rhbz#1210669, rhbz#1211436, rhbz#1211548, rhbz#1211550, rhbz#1213434
      rhbz#1213698, rhbz#1215569, rhbz#1216046


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.15-2
changelog:
  - RHEL: Relax qemu-kvm dependency from libvirt-daemon-kvm (rhbz#1212642)
  - caps: Fix regression defaulting to host arch (rhbz#1219191)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.16-1
changelog:
  - Rebased to libvirt-1.2.16 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#847198, rhbz#890648, rhbz#893738, rhbz#976387, rhbz#981546
      rhbz#998813, rhbz#1066375, rhbz#1073233, rhbz#1073305, rhbz#1076354
      rhbz#1131486, rhbz#1143837, rhbz#1146539, rhbz#1159171, rhbz#1159219
      rhbz#1161541, rhbz#1164966, rhbz#1171984, rhbz#1174177, rhbz#1174226
      rhbz#1176020, rhbz#1176739, rhbz#1177599, rhbz#1181074, rhbz#1183893
      rhbz#1191227, rhbz#1194593, rhbz#1195882, rhbz#1197580, rhbz#1204006
      rhbz#1204033, rhbz#1206521, rhbz#1207043, rhbz#1211938, rhbz#1213345
      rhbz#1218145, rhbz#1218577, rhbz#1220195, rhbz#1220265, rhbz#1220474
      rhbz#1220702, rhbz#1220809, rhbz#1221047, rhbz#1221504, rhbz#1223631
      rhbz#1223688, rhbz#1224018, rhbz#1226849


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-1
changelog:
  - Rebased to libvirt-1.2.17 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#890648, rhbz#985653, rhbz#1021480, rhbz#1089914, rhbz#1131755
      rhbz#1171933, rhbz#1179680, rhbz#1181087, rhbz#1182388, rhbz#1186797
      rhbz#1186969, rhbz#1194593, rhbz#1196644, rhbz#1200206, rhbz#1201143
      rhbz#1201760, rhbz#1202208, rhbz#1207692, rhbz#1210352, rhbz#1220213
      rhbz#1223177, rhbz#1224053, rhbz#1224088, rhbz#1224233, rhbz#1224587
      rhbz#1225694, rhbz#1226234, rhbz#1226854, rhbz#1227180, rhbz#1227551
      rhbz#1227555, rhbz#1227558, rhbz#1227664, rhbz#1228007, rhbz#1229199
      rhbz#1229592, rhbz#1229666, rhbz#1230039, rhbz#1230137, rhbz#1230664
      rhbz#1232606, rhbz#1232880, rhbz#1234686, rhbz#1234729, rhbz#1235116
      rhbz#1236438, rhbz#1236496, rhbz#1236507, rhbz#1236585, rhbz#1236924
      rhbz#1238153, rhbz#1238338


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-2
changelog:
  - util: bitmap: Don't alloc overly large binary bitmaps (rhbz#1238589)
  - storage: Fix regression in storagePoolUpdateAllState (rhbz#1238610)
  - Separate isa-fdc options generation (rhbz#1227880)
  - Explicitly format the isa-fdc controller for newer q35 machines (rhbz#1227880)
  - Add rhel machine types to qemuDomainMachineNeedsFDC (rhbz#1227880)
  - conf: Don't allow duplicated target names regardless of bus (rhbz#1142631)
  - storage: Revert volume obj list updating after volume creation (4749d82a) (rhbz#1241454)
  - qemu_monitor: Wire up MIGRATION event (rhbz#1212077)
  - qemu: Enable migration events on QMP monitor (rhbz#1212077)
  - qemuDomainGetJobStatsInternal: Support migration events (rhbz#1212077)
  - qemu: Update migration state according to MIGRATION event (rhbz#1212077)
  - qemu: Wait for migration events on domain condition (rhbz#1212077)
  - qemu: Check duplicate WWNs also for hotplugged disks (rhbz#1208009)
  - qemu: move the guest status check before agent config and status check (rhbz#1240979)
  - qemu: report error for non-existing disk in blockjobinfo (rhbz#1241355)
  - virCondWaitUntil: add another return value (rhbz#1147471)
  - virDomainObjSignal: drop this function (rhbz#1147471)
  - monitor: detect that eject fails because the tray is locked (rhbz#1147471)
  - qemu_hotplug: try harder to eject media (rhbz#1147471)
  - qemu: Drop LFs at the end of error from QEMU log (rhbz#1090093)
  - Introduce virHashAtomic (rhbz#1090093)
  - Introduce virErrorCopyNew (rhbz#1090093)
  - RHEL: spec: Require perl-XML-XPath (rhbz#1090093)
  - qemu: Remember incoming migration errors (rhbz#1090093)
  - qemu: Don't report false error from MigrateFinish (rhbz#1090093)
  - qemu: Use error from Finish instead of "unexpectedly failed" (rhbz#1090093)
  - cpu: Add support for MPX and AVX512 Intel features (rhbz#1076170)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-3
changelog:
  - qemuProcessHandleMigrationStatus: Update migration status more frequently (rhbz#1212077)
  - qemuDomainSetNumaParamsLive: Check for NUMA mode more wisely (rhbz#1232663)
  - qemu: process: Improve update of maximum balloon state at startup (rhbz#1242940)
  - storage: Fix pool building when directory already exists (rhbz#1244080)
  - virsh: report error if vcpu number exceed the guest maxvcpu number (rhbz#1160559)
  - cmdVcpuPin: Remove dead code (rhbz#1160559)
  - rpc: Add virNetDaemonHasClients (rhbz#1240283)
  - rpc: Rework timerActive logic in daemon (rhbz#1240283)
  - cgroup: Drop resource partition from virSystemdMakeScopeName (rhbz#1238570)
  - virsh: blockjob: Extract block job info code into a separate function (rhbz#1227551)
  - virsh: cmdBlockJob: Switch to declarative flag interlocking (rhbz#1227551)
  - virsh: blockjob: Split out vshBlockJobSetSpeed from blockJobImpl (rhbz#1227551)
  - virsh: block job: separate abort from blockJobImpl (rhbz#1227551)
  - virsh: Split out block pull implementation from blockJobImpl (rhbz#1227551)
  - virsh: Kill blockJobImpl by moving the final impl into cmdBlockCommit (rhbz#1227551)
  - virsh: Refactor argument checking in cmdBlockCommit (rhbz#1227551)
  - virsh: Refactor argument handling in cmdBlockCopy (rhbz#1227551)
  - virsh: Refactor argument handling in cmdBlockPull (rhbz#1227551)
  - qemu: Update state of block job to READY only if it actually is ready (rhbz#1227551)
  - virsh: Refactor block job waiting in cmdBlockPull (rhbz#1227551)
  - virsh: Refactor block job waiting in cmdBlockCommit (rhbz#1227551)
  - virsh: Refactor block job waiting in cmdBlockCopy (rhbz#1197592)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-4
changelog:
  - qemu: Reject migration with memory-hotplug if destination doesn't support it (rhbz#1248350)
  - qemu: Properly check for incoming migration job (rhbz#1242904)
  - qemu: Do not reset labels when migration fails (rhbz#1242904)
  - qemu: Check for iotune_max support properly (rhbz#1224053)
  - docs: Add Fibre Channel NPIV supported option for volume lun config (rhbz#1238545)
  - conf: Allow error reporting in virDomainDiskSourceIsBlockType (rhbz#1238545)
  - qemu: Forbid image pre-creation for non-shared storage migration (rhbz#1249587)
  - qemu: remove deadcode in qemuDomain{HelperGetVcpus|GetIOThreadsLive} (rhbz#1213713)
  - nodeinfo: Introduce local linuxGetCPUPresentPath (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetCPUCount (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetPresentCPUBitmap (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetCPUBitmap (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetCPUMap (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetInfo (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeCapsInitNUMA (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetMemoryStats (rhbz#1213713)
  - nodeinfo: fix to parse present cpus rather than possible cpus (rhbz#1213713)
  - tests: Add nodeinfo test for non-present CPUs (rhbz#1213713)
  - nodeinfo: Make sysfs_prefix usage more consistent (rhbz#1213713)
  - nodeinfo: Formatting changes (rhbz#1213713)
  - tests: Restore links in deconfigured-cpus nodeinfo test (rhbz#1213713)
  - nodeinfo: Add nodeGetPresentCPUBitmap() to libvirt_private.syms (rhbz#1213713)
  - nodeinfo: Fix nodeGetCPUBitmap()'s fallback code path (rhbz#1213713)
  - nodeinfo: Introduce linuxGetCPUGlobalPath() (rhbz#1213713)
  - nodeinfo: Introduce linuxGetCPUOnlinePath() (rhbz#1213713)
  - nodeinfo: Rename linuxParseCPUmax() to linuxParseCPUCount() (rhbz#1213713)
  - nodeinfo: Add old kernel compatibility to nodeGetPresentCPUBitmap() (rhbz#1213713)
  - nodeinfo: Remove out parameter from nodeGetCPUBitmap() (rhbz#1213713)
  - nodeinfo: Rename nodeGetCPUBitmap() to nodeGetOnlineCPUBitmap() (rhbz#1213713)
  - nodeinfo: Phase out cpu_set_t usage (rhbz#1213713)
  - nodeinfo: Use nodeGetOnlineCPUBitmap() when parsing node (rhbz#1213713)
  - nodeinfo: Use a bitmap to keep track of node CPUs (rhbz#1213713)
  - nodeinfo: Calculate present and online CPUs only once (rhbz#1213713)
  - nodeinfo: Check for errors when reading core_id (rhbz#1213713)
  - Renamed deconfigured-cpus to allow make dist (rhbz#1213713)
  - tests: Finish rename of the long nodeinfo test case (rhbz#1213713)
  - nodeinfo: Fix output on PPC64 KVM hosts (rhbz#1213713)
  - tests: Prepare for subcore tests (rhbz#1213713)
  - tests: Add subcores1 nodeinfo test (rhbz#1213713)
  - tests: Add subcores2 nodeinfo test (rhbz#1213713)
  - tests: Add subcores3 nodeinfo test (rhbz#1213713)
  - nodeinfo: Fix build failure when KVM headers are not available (rhbz#1213713)
  - qemu: fix some api cannot work when disable cpuset in conf (rhbz#1244664)
  - qemu: Auto assign pci addresses for shared memory devices (rhbz#1165029)
  - conf: Add getter for network routes (rhbz#1094205)
  - network: Add another collision check into networkCheckRouteCollision (rhbz#1094205)
  - docs: Document how libvirt handles companion controllers (rhbz#1069590)
  - qemu: Reject updating unsupported disk information (rhbz#1007228)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-5
changelog:
  - numa_conf: Introduce virDomainNumaGetMaxCPUID (rhbz#1176020)
  - virDomainDefParseXML: Check for malicious cpu ids in <numa/> (rhbz#1176020)
  - conf: more useful error message when pci function is out of range (rhbz#1004596)
  - qemu: Fix reporting of physical capacity for block devices (rhbz#1250982)
  - network: verify proper address family in updates to <host> and <range> (rhbz#1184736)
  - rpc: Remove keepalive_required option (rhbz#1247087)
  - virNetDevBandwidthParseRate: Reject negative values (rhbz#1022292)
  - domain: Fix crash if trying to live update disk <serial> (rhbz#1007228)
  - qemu: fail on attempts to use <filterref> for non-tap network connections (rhbz#1180011)
  - network: validate network NAT range (rhbz#985653)
  - conf: Don't try formating non-existing addresses (rhbz#985653)
  - cpu: Rename {powerpc, ppc} => ppc64 (filesystem) (rhbz#1250977)
  - cpu: Rename {powerpc, ppc} => ppc64 (exported symbols) (rhbz#1250977)
  - cpu: Rename {powerpc, ppc} => ppc64 (internal symbols) (rhbz#1250977)
  - cpu: Indentation changes in the ppc64 driver (rhbz#1250977)
  - cpu: Mark driver functions in ppc64 driver (rhbz#1250977)
  - cpu: Simplify NULL handling in ppc64 driver (rhbz#1250977)
  - cpu: Simplify ppc64ModelFromCPU() (rhbz#1250977)
  - cpu: Reorder functions in the ppc64 driver (rhbz#1250977)
  - cpu: Remove ISA information from CPU map XML (rhbz#1250977)
  - tests: Remove unused file (rhbz#1250977)
  - tests: Improve result handling in cpuTestGuestData() (rhbz#1250977)
  - cpu: Never skip CPU model name check in ppc64 driver (rhbz#1250977)
  - cpu: CPU model names have to match on ppc64 (rhbz#1250977)
  - cpu: Use ppc64Compute() to implement ppc64DriverCompare() (rhbz#1250977)
  - tests: Temporarily disable ppc64 cpu tests (rhbz#1250977)
  - cpu: Align ppc64 CPU data with x86 (rhbz#1250977)
  - cpu: Support multiple PVRs in the ppc64 driver (rhbz#1250977)
  - cpu: Simplify ppc64 part of CPU map XML (rhbz#1250977)
  - cpu: Parse and use PVR masks in the ppc64 driver (rhbz#1250977)
  - cpu: Add POWER8NVL information to CPU map XML (rhbz#1250977)
  - cpu: Implement backwards compatibility in the ppc64 driver (rhbz#1250977)
  - cpu: Forbid model fallback in the ppc64 driver (rhbz#1250977)
  - tests: Re-enable ppc64 cpu tests (rhbz#1250977)
  - tests: Add a bunch of cpu test case for ppc64 (rhbz#1250977)
  - cpu: Fix segfault in the ppc64 driver (rhbz#1250977)
  - qemu: Fix segfault when parsing private domain data (rhbz#1162947)
  - conf: Pass private data to Parse function of XML options (rhbz#1162947)
  - qemu: Keep numad hint after daemon restart (rhbz#1162947)
  - qemu: Use numad information when getting pin information (rhbz#1162947)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-6
changelog:
  - api: Remove check on iothread_id arg in virDomainPinIOThread (rhbz#1251886)
  - api: Adjust comment for virDomainAddIOThread (rhbz#1251886)
  - qemu: Add check for invalid iothread_id in qemuDomainChgIOThread (rhbz#1251886)
  - conf: Check for attach disk usage of iothread=0 (rhbz#1253108)
  - virNetDevBandwidthUpdateRate: turn class_id into integer (rhbz#1252473)
  - bridge_driver: Introduce networkBandwidthChangeAllowed (rhbz#1252473)
  - bridge_driver: Introduce networkBandwidthUpdate (rhbz#1252473)
  - qemuDomainSetInterfaceParameters: Use new functions to update bandwidth (rhbz#1252473)
  - cpu: Don't update host-model guest CPUs on ppc64 (rhbz#1251927)
  - cpu: Better support for ppc64 compatibility modes (rhbz#1251927)
  - cpu: Move check for NULL CPU model inside the driver (rhbz#1251927)
  - tests: Add some compatibility-related cases to the CPU tests (rhbz#1251927)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-7
changelog:
  - Start daemon only after filesystems are mounted (rhbz#1255228)
  - virfile: Add error for root squash change mode failure (rhbz#1253609)
  - virfile: Introduce virFileUnlink (rhbz#1253609)
  - storage: Correct the 'mode' check (rhbz#1253609)
  - storage: Handle failure from refreshVol (rhbz#1253609)
  - util: Add virStringGetFirstWithPrefix (rhbz#1165580)
  - util: Add virCgroupGetBlockDevString (rhbz#1165580)
  - util: Add getters for cgroup block device I/O throttling (rhbz#1165580)
  - lxc: Sync BlkioDevice values when setting them in cgroups (rhbz#1165580)
  - qemu: Sync BlkioDevice values when setting them in cgroups (rhbz#1165580)
  - Allow vfio hotplug of a device to the domain which owns the iommu (rhbz#1256486)
  - hostdev: skip ACS check when using VFIO for device assignment (rhbz#1256486)
  - docs: Clarify unprivileged sgio feature (rhbz#1072736)
  - qemu: Introduce qemuIsSharedHostdev (rhbz#1072736)
  - qemu: Introduce qemuGetHostdevPath (rhbz#1072736)
  - qemu: Refactor qemuCheckSharedDisk to create qemuCheckUnprivSGIO (rhbz#1072736)
  - qemu: Inline qemuGetHostdevPath (rhbz#1072736)
  - qemu: Refactor qemuSetUnprivSGIO return values (rhbz#1072736)
  - qemu: Fix integer/boolean logic in qemuSetUnprivSGIO (rhbz#1072736)
  - RHEL: qemu: Add ability to set sgio values for hostdev (rhbz#1072736)
  - RHEL: qemu: Add check for unpriv sgio for SCSI generic host device (rhbz#1072736)
  - security_selinux: Use proper structure to access socket data (rhbz#1146886)
  - security_dac: Label non-listening sockets (rhbz#1146886)
  - security: Add virSecurityDomainSetDirLabel (rhbz#1146886)
  - security_stack: Add SetDirLabel support (rhbz#1146886)
  - security_selinux: Add SetDirLabel support (rhbz#1146886)
  - security_dac: Add SetDirLabel support (rhbz#1146886)
  - qemu: Fix access to auto-generated socket paths (rhbz#1146886)
  - tests: Use qemuProcessPrepareMonitorChr in qemuxmlnstest (rhbz#1146886)
  - qemu: Label correct per-VM path when starting (rhbz#1146886)
  - selinux: fix compile errors (rhbz#1146886)
  - conf: Add ioeventfd option for controllers (rhbz#1150484)
  - qemu: Enable ioeventfd usage for virtio-scsi controllers (rhbz#1150484)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-8
changelog:
  - util: make virNetDev(Replace|Restore)MacAddress public functions (rhbz#1257004)
  - util: don't use netlink to save/set mac for macvtap+passthrough+802.1Qbh (rhbz#1257004)
  - cpu: Introduce IvyBridge CPU model (rhbz#1254420)
  - examples: Add example polkit ACL rules (rhbz#1115289)
  - qemu: don't use initialized ret in qemuRemoveSharedDevice (rhbz#1072736)
  - qemu: Introduce qemuDomainMachineIsS390CCW (rhbz#1258361)
  - qemu: Need to check for machine.os when using ADDRESS_TYPE_CCW (rhbz#1258361)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-9
changelog:
  - conf: fix crash when parsing a unordered NUMA <cell/> (rhbz#1260846)
  - vmx: Some whitespace cleanup (rhbz#1172544)
  - vmx: The virVMXParseDisk deviceType can be NULL, add some missing checks (rhbz#1172544)
  - vmx: Add handling for CDROM devices with SCSI passthru (rhbz#1172544)
  - qemu: hotplug: Properly clean up drive backend if frontend hotplug fails (rhbz#1262399)
  - qemu: Introduce QEMU_CAPS_DEVICE_RTL8139 (rhbz#1254044)
  - qemu: Introduce QEMU_CAPS_DEVICE_E1000 (rhbz#1254044)
  - qemu: Introduce QEMU_CAPS_DEVICE_VIRTIO_NET (rhbz#1254044)
  - qemu: Try several network devices when looking for a default (rhbz#1254044)
  - qemu: Report error if per-VM directory cannot be created (rhbz#1146886)
  - qemu: Do not allow others into per-VM subdirectories (rhbz#1146886)
  - qemu: Allow others to browse /var/lib/libvirt/qemu (rhbz#1146886)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-10
changelog:
  - virSecuritySELinuxSetSecurityAllLabel: drop useless virFileIsSharedFSType (rhbz#1124841)
  - security_selinux: Replace SELinuxSCSICallbackData with proper struct (rhbz#1124841)
  - virSecurityManager: Track if running as privileged (rhbz#1124841)
  - security_selinux: Take @privileged into account (rhbz#1124841)
  - qemu: Fix using guest architecture as lookup key (rhbz#1260753)
  - virfile: Check for existence of dir in virFileDeleteTree (rhbz#1146886)
  - Revert "qemu: Fix integer/boolean logic in qemuSetUnprivSGIO" (rhbz#1072736)
  - qemu: migration: Relax enforcement of memory hotplug support (rhbz#1252685)
  - conf: Add helper to determine whether memory hotplug is enabled for a vm (rhbz#1252685)
  - qemu: Make memory alignment helper more universal (rhbz#1252685)
  - conf: Drop VIR_DOMAIN_DEF_PARSE_CLOCK_ADJUST flag (rhbz#1252685)
  - conf: Document all VIR_DOMAIN_DEF_PARSE_* flags (rhbz#1252685)
  - conf: Add XML parser flag that will allow us to do incompatible updates (rhbz#1252685)
  - conf: Split memory related post parse stuff into separate function (rhbz#1252685)
  - conf: Rename max_balloon to total_memory (rhbz#1252685)
  - conf: Pre-calculate initial memory size instead of always calculating it (rhbz#1252685)
  - conf: Don't always recalculate initial memory size from NUMA size totals (rhbz#1252685)
  - qemu: command: Align memory sizes only on fresh starts (rhbz#1252685)
  - qemu: ppc64: Align memory sizes to 256MiB blocks (rhbz#1249006)
  - test: Add test to validate that memory sizes don't get updated on migration (rhbz#1252685)
  - qemu: Align memory module sizes to 2MiB (rhbz#1252685)
  - qemu: Refresh memory size only on fresh starts (rhbz#1242940)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-13
changelog:
  - qemu: Add conditions for qemu-kvm use on ppc64 (rhbz#1267882)
  - qemu: Move simplification variable to begining of the function (rhbz#1266856)
  - qemu: Extract -mem-path building into its own function (rhbz#1266856)
  - qemu: Add -mem-path even with numa (rhbz#1266856)
  - qemu: Use memory-backing-file only when needed (rhbz#1266856)
  - qemu: Always update migration times on destination (rhbz#1265902)
  - qemu: Copy completed migration stats only on success (rhbz#1265902)
  - qemu: Introduce flags in qemuMigrationCompleted (rhbz#1265902)
  - qemu: Make updating stats in qemuMigrationCheckJobStatus optional (rhbz#1265902)
  - qemu: Wait until destination QEMU consumes all migration data (rhbz#1265902)


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.1-1
changelog:
  - Rebased to libvirt-1.3.1 (rhbz#1286679)
  - The rebase also fixes the following bugs:
      rhbz#1207692, rhbz#1233115, rhbz#1245476, rhbz#1298065, rhbz#1026136
      rhbz#1207751, rhbz#1210587, rhbz#1250287, rhbz#1253107, rhbz#1254152
      rhbz#1257486, rhbz#1266078, rhbz#1271107, rhbz#1159219, rhbz#1163091
      rhbz#1196711, rhbz#1263574, rhbz#1270427, rhbz#1245525, rhbz#1247987
      rhbz#1248277, rhbz#1249981, rhbz#1251461, rhbz#1256999, rhbz#1264008
      rhbz#1265049, rhbz#1265114, rhbz#1270715, rhbz#1272301, rhbz#1273686
      rhbz#997561, rhbz#1166452, rhbz#1231114, rhbz#1233003, rhbz#1260576
      rhbz#1261432, rhbz#1273480, rhbz#1273491, rhbz#1277781, rhbz#1278404
      rhbz#1281707, rhbz#1282288, rhbz#1285665, rhbz#1288690, rhbz#1292984
      rhbz#921135, rhbz#1025230, rhbz#1240439, rhbz#1266982, rhbz#1270709
      rhbz#1276198, rhbz#1278068, rhbz#1278421, rhbz#1281710, rhbz#1291035
      rhbz#1297020, rhbz#1297690
  - RHEL: Add rhel machine types to qemuDomainMachineNeedsFDC (rhbz#1227880)
  - RHEL: qemu: Support vhost-user-multiqueue with QEMU 2.3 (rhbz#1207692)


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.2-1
changelog:
  - Rebased to libvirt-1.3.2 (rhbz#1286679)
  - The rebase also fixes the following bugs:
      rhbz#1197592, rhbz#1235180, rhbz#1244128, rhbz#1244567, rhbz#1245013
      rhbz#1250331, rhbz#1265694, rhbz#1267256, rhbz#1275039, rhbz#1282846
      rhbz#1283085, rhbz#1286679, rhbz#1290324, rhbz#1293241, rhbz#1293899
      rhbz#1299696, rhbz#1305922


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.3-1
changelog:
  - Rebased to libvirt-1.3.3 (rhbz#1286679)
  - The rebase also fixes the following bugs:
      rhbz#830971, rhbz#986365, rhbz#1151723, rhbz#1195176, rhbz#1249441
      rhbz#1260749, rhbz#1264008, rhbz#1269715, rhbz#1278727, rhbz#1281706
      rhbz#1282744, rhbz#1286679, rhbz#1288000, rhbz#1289363, rhbz#1293804
      rhbz#1306556, rhbz#1308317, rhbz#1313264, rhbz#1313314, rhbz#1314594
      rhbz#1315059, rhbz#1316371, rhbz#1316384, rhbz#1316420, rhbz#1316433
      rhbz#1316465, rhbz#1317531, rhbz#1318569, rhbz#1321546


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.4-1
changelog:
  - Rebased to libvirt-1.3.4 (rhbz#1286679)
  - The rebase also fixes the following bugs:
      rhbz#1002423, rhbz#1004593, rhbz#1038888, rhbz#1103314, rhbz#1220702
      rhbz#1286679, rhbz#1289363, rhbz#1320447, rhbz#1324551, rhbz#1325043
      rhbz#1325075, rhbz#1325757, rhbz#1326270, rhbz#1327499, rhbz#1328401
      rhbz#1329041, rhbz#1329046, rhbz#1329819, rhbz#1331228


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.5-1
changelog:
  - Rebased to libvirt-1.3.5 (rhbz#1286679)
  - The rebase also fixes the following bugs:
      rhbz#1139766, rhbz#1182074, rhbz#1209802, rhbz#1265694, rhbz#1286679
      rhbz#1286709, rhbz#1318993, rhbz#1319044, rhbz#1320836, rhbz#1326660
      rhbz#1327537, rhbz#1328003, rhbz#1328301, rhbz#1329045, rhbz#1336629
      rhbz#1337073, rhbz#1339900, rhbz#1341460


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-1
changelog:
  - Rebased to libvirt-2.0.0 (rhbz#1286679)
  - The rebase also fixes the following bugs:
      rhbz#735385, rhbz#1004602, rhbz#1046833, rhbz#1180092, rhbz#1216281
      rhbz#1283207, rhbz#1286679, rhbz#1289288, rhbz#1302373, rhbz#1304222
      rhbz#1312188, rhbz#1316370, rhbz#1320893, rhbz#1322210, rhbz#1325072
      rhbz#1325080, rhbz#1332446, rhbz#1333248, rhbz#1333404, rhbz#1334237
      rhbz#1335617, rhbz#1335832, rhbz#1337869, rhbz#1341415, rhbz#1342342
      rhbz#1342874, rhbz#1342962, rhbz#1343442, rhbz#1344892, rhbz#1344897
      rhbz#1345743, rhbz#1346723, rhbz#1346724, rhbz#1346730, rhbz#1350688
      rhbz#1351473


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-2
changelog:
  - qemu: Use bootindex whenever possible (rhbz#1323085)
  - qemu: Properly reset spiceMigration flag (rhbz#1151723)
  - qemu: Drop useless SPICE migration code (rhbz#1151723)
  - qemu: Memory locking is only required for KVM guests on ppc64 (rhbz#1350772)
  - virtlogd: make max file size & number of backups configurable (rhbz#1351209)
  - virtlogd: increase max file size to 2 MB (rhbz#1351209)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-3
changelog:
  - qemu: getAutoDumpPath() return value should be dumpfile not domname. (rhbz#1354238)
  - qemu: Copy complete domain def in qemuDomainDefFormatBuf (rhbz#1320470)
  - qemu: Drop default channel path during migration (rhbz#1320470)
  - qemu: Fix migration from old libvirt (rhbz#1320500)
  - Add USB addresses to qemuhotplug test cases (rhbz#1215968)
  - Introduce virDomainUSBDeviceDefForeach (rhbz#1215968)
  - Allow omitting USB port (rhbz#1215968)
  - Store USB port path as an array of integers (rhbz#1215968)
  - Introduce virDomainUSBAddressSet (rhbz#1215968)
  - Add functions for adding USB controllers to addrs (rhbz#1215968)
  - Add functions for adding USB hubs to addrs (rhbz#1215968)
  - Reserve existing USB addresses (rhbz#1215968)
  - Add tests for USB address assignment (rhbz#1215968)
  - Assign addresses to USB devices (rhbz#1215968)
  - Assign addresses on USB device hotplug (rhbz#1215968)
  - Auto-add one hub if there are too many USB devices (rhbz#1215968)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-4
changelog:
  - qemu: hotplug: fix changeable media ejection (rhbz#1359071)
  - lxc: Don't crash by forgetting to ref transient domains (rhbz#1351057)
  - Introduce <iommu> device (rhbz#1235581)
  - Add QEMU_CAPS_DEVICE_INTEL_IOMMU (rhbz#1235581)
  - qemu: format intel-iommu on the command line (rhbz#1235581)
  - qemu_monitor_json: add support to search QOM device path by device alias (rhbz#1358728)
  - hvsupport: Introduce parseSymsFile (rhbz#1286679)
  - hvsupport: use a regex instead of XML::XPath (rhbz#1286679)
  - hvsupport: construct the group regex upfront (rhbz#1286679)
  - hvsupport: skip non-matching lines early (rhbz#1286679)
  - virconf: Fix config file path construction (rhbz#1357364)
  - virDomainHostdevDefFree: Don't leak privateData (rhbz#1357346)
  - virt-admin: Output srv-threadpool-info data as unsigned int rather than signed (rhbz#1356769)
  - util: Introduce virISCSINodeNew (rhbz#1356436)
  - iscsi: Establish connection to target via static target login (rhbz#1356436)
  - storage: Document wiping formatted volume types (rhbz#868771)
  - admin: Retrieve the SASL context for both local and remote connection (rhbz#1361948)
  - daemon: sasl: Don't forget to save SASL username to client's identity (rhbz#1361948)
  - vsh: Make vshInitDebug return int instead of void (rhbz#1357363)
  - tools: Make use of the correct environment variables (rhbz#1357363)
  - util: Add 'usage' for encryption (rhbz#1301021)
  - virStorageEncryptionSecretFree: Don't leak secret lookup definition (rhbz#1301021)
  - encryption: Add luks parsing for storageencryption (rhbz#1301021)
  - encryption: Add <cipher> and <ivgen> to encryption (rhbz#1301021)
  - qemu: Introduce helper qemuDomainSecretDiskCapable (rhbz#1301021)
  - tests: Adjust LUKS tests to use 'volume' secret type (rhbz#1301021)
  - docs: Update docs to reflect LUKS secret changes (rhbz#1301021)
  - qemu: Alter error path cleanup for qemuDomainAttachHostSCSIDevice (rhbz#1301021)
  - qemu: Alter error path cleanup for qemuDomainAttachVirtioDiskDevice (rhbz#1301021)
  - qemu: Alter error path cleanup for qemuDomainAttachSCSIDisk (rhbz#1301021)
  - qemu: Move and rename qemuBufferEscapeComma (rhbz#1301021)
  - storage: Add support to create a luks volume (rhbz#1301021)
  - qemu: Add secinfo for hotplug virtio disk (rhbz#1301021)
  - qemu: Alter the qemuDomainGetSecretAESAlias to add new arg (rhbz#1301021)
  - qemu: Add luks support for domain disk (rhbz#1301021)
  - qemu: Move setting of obj bools for qemuDomainAttachVirtioDiskDevice (rhbz#1301021)
  - qemu: Move setting of encobjAdded for qemuDomainAttachSCSIDisk (rhbz#1301021)
  - storage: Fix error path (rhbz#1301021)
  - qemu: Disallow usage of luks encryption if aes secret not possible (rhbz#1301021)
  - storage: Add extra failure condition for luks volume creation (rhbz#1301021)
  - virstoragefile: refactor virStorageFileMatchesNNN methods (rhbz#1301021)
  - qemu: Make qemuDomainCheckDiskStartupPolicy self-contained (rhbz#1168453)
  - qemu: Remove unnecessary label and its only reference (rhbz#1168453)
  - qemu: Fix support for startupPolicy with volume/pool disks (rhbz#1168453)
  - virsh: Report error when explicit connection fails (rhbz#1356461)
  - tests: Add testing of backing store string parser (rhbz#1134878)
  - util: json: Make first argument of virJSONValueObjectForeachKeyValue const (rhbz#1134878)
  - util: qemu: Add wrapper for JSON -> commandline conversion (rhbz#1134878)
  - util: qemu: Add support for user-passed strings in JSON->commandline (rhbz#1134878)
  - util: qemu: Allow nested objects in JSON -> commandline generator (rhbz#1134878)
  - util: qemu: Allow for different approaches to format JSON arrays (rhbz#1134878)
  - util: qemu: Don't generate any extra commas in virQEMUBuildCommandLineJSON (rhbz#1134878)
  - util: json: Make first argument of virJSONValueCopy const (rhbz#1134878)
  - util: storage: Add parser for qemu's json backing pseudo-protocol (rhbz#1134878)
  - util: storage: Add support for host device backing specified via JSON (rhbz#1134878)
  - util: storage: Add support for URI based backing volumes in qemu's JSON pseudo-protocol (rhbz#1134878)
  - util: storage: Add json pseudo protocol support for gluster volumes (rhbz#1134878)
  - util: storage: Add json pseudo protocol support for iSCSI volumes (rhbz#1134878)
  - util: storage: Add JSON backing volume parser for 'nbd' protocol (rhbz#1134878)
  - util: storage: Add JSON backing store parser for 'sheepdog' protocol (rhbz#1134878)
  - util: storage: Add 'ssh' network storage protocol (rhbz#1134878)
  - util: storage: Add JSON backing volume parser for 'ssh' protocol (rhbz#1134878)
  - qemu: command: Rename qemuBuildNetworkDriveURI to qemuBuildNetworkDriveStr (rhbz#1247521)
  - qemu: command: Split out network disk URI building (rhbz#1247521)
  - qemu: command: Extract drive source command line formatter (rhbz#1247521)
  - qemu: command: Refactor code extracted to qemuBuildDriveSourceStr (rhbz#1247521)
  - storage: gluster: Support multiple hosts in backend functions (rhbz#1247521)
  - util: qemu: Add support for numbered array members (rhbz#1247521)
  - qemu: command: Add infrastructure for object specified disk sources (rhbz#1247521)
  - qemu: command: Add support for multi-host gluster disks (rhbz#1247521)
  - qemu: Need to free fileprops in error path (rhbz#1247521)
  - storage: remove "luks" storage volume type (rhbz#1301021)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-5
changelog:
  - qemu: Fix domain state after reset (rhbz#1269575)
  - rpc: virnetserver: Rename ClientSetProcessingControls to ClientSetLimits (rhbz#1357776)
  - rpc: virnetserver: Move virNetServerCheckLimits which is static up in the file (rhbz#1357776)
  - rpc: virnetserver: Add code to CheckLimits to handle suspending of services (rhbz#1357776)
  - admin: rpc: virnetserver: Fix updating of the client limits (rhbz#1357776)
  - rpc: virnetserver: Remove dead code checking the client limits (rhbz#1357776)
  - storage: Fix a NULL ptr dereference in virStorageBackendCreateQemuImg (rhbz#1363636)
  - qemu: Introduce qemuAliasFromHostdev (rhbz#1289391)
  - qemu: Use the hostdev alias in qemuDomainAttachHostSCSIDevice error path (rhbz#1289391)
  - storage: Don't remove the pool for buildPool failure in storagePoolCreate (rhbz#1362349)
  - lxcDomainCreateXMLWithFiles: Avoid crash (rhbz#1363773)
  - admin: Fix the default uri for session daemon to libvirtd:///session (rhbz#1356858)
  - docs: Distribute subsite.xsl (rhbz#1365004)
  - qemuBuildMachineCommandLine: Follow our pattern (rhbz#1304483)
  - Introduce SMM feature (rhbz#1304483)
  - Introduce @secure attribute to os loader element (rhbz#1304483)
  - qemu: Enable secure boot (rhbz#1304483)
  - qemu: Advertise OVMF_CODE.secboot.fd (rhbz#1304483)
  - tests: Fix broken build (rhbz#1304483)
  - cpu_x86: Introduce x86FeatureIsMigratable (rhbz#1365500)
  - cpu_x86: Properly drop non-migratable features (rhbz#1365500)
  - tests: Add a test for host-model CPU with CMT feature (rhbz#1365500)
  - cpu_x86: Fix host-model CPUs on hosts with CMT (rhbz#1365500)
  - virt-admin: Fix the error when an invalid URI has been provided (rhbz#1365903)
  - conf: improve error log when PCI devices don't match requested controller (rhbz#1363627)
  - conf: don't allow connecting upstream-port directly to pce-expander-bus (rhbz#1361172)
  - conf: restrict where dmi-to-pci-bridge can be connected (rhbz#1363648)
  - conf: restrict expander buses to connect only to a root bus (rhbz#1358712)
  - virNetDevMacVLanCreateWithVPortProfile: Don't mask virNetDevMacVLanTapOpen error (rhbz#1240439)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-6
changelog:
  - qemu_command: don't modify heads for graphics device (rhbz#1366119)
  - virsh: Fix core for cmdSecretGetValue (rhbz#1366611)
  - conf: report an error message for non-existing USB hubs (rhbz#1367130)
  - conf: free the ports array of a USB hub (rhbz#1366097)
  - utils: storage: Fix JSON field name for uri based storage (rhbz#1367260)
  - qemu: Adjust the cur_ballon on coldplug/unplug of dimms (rhbz#1220702)
  - conf: Provide error on undefined iothreadsched entry (rhbz#1366484)
  - qemu: Fix the command line generation for rbd auth using aes secrets (rhbz#1182074)
  - qemu: Fix crash hot plugging luks volume (rhbz#1367259)
  - Revert "admin: Fix the default uri for session daemon to libvirtd:///session" (rhbz#1367269)
  - libvirt: convert to typesafe virConf accessors (rhbz#1367269)
  - admin: Fix default uri config option name s/admin_uri_default/uri_default (rhbz#1367269)
  - virt-admin: Properly fix the default session daemon URI to admin server (rhbz#1367269)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-7
changelog:
  - qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY (rhbz#1097930)
  - conf: Extract code formatting vCPU info (rhbz#1097930)
  - conf: Rename virDomainVcpuInfoPtr to virDomainVcpuDefPtr (rhbz#1097930)
  - conf: Don't report errors from virDomainDefGetVcpu (rhbz#1097930)
  - tests: qemuxml2xml: Format status XML header dynamically (rhbz#1097930)
  - conf: convert def->vcpus to a array of pointers (rhbz#1097930)
  - conf: Add private data for virDomainVcpuDef (rhbz#1097930)
  - qemu: domain: Add vcpu private data structure (rhbz#1097930)
  - qemu: domain: Extract formating and parsing of vCPU thread ids (rhbz#1097930)
  - qemu: Add cpu ID to the vCPU pid list in the status XML (rhbz#1097930)
  - qemu: Store vCPU thread ids in vcpu private data objects (rhbz#1097930)
  - Fix logic in qemuDomainObjPrivateXMLParseVcpu (rhbz#1097930)
  - qemu: Add qemuProcessSetupPid() and use it in qemuProcessSetupIOThread() (rhbz#1097930)
  - qemu: Use qemuProcessSetupPid() in qemuProcessSetupEmulator() (rhbz#1097930)
  - qemu: Use qemuProcessSetupPid() in qemuProcessSetupVcpu() (rhbz#1097930)
  - qemuBuildCpuCommandLine: Don't leak @buf (rhbz#1097930)
  - conf: Make really sure we don't access non-existing vCPUs (rhbz#1097930)
  - conf: Make really sure we don't access non-existing vCPUs again (rhbz#1097930)
  - qemu: capabilities: Drop unused function virQEMUCapsGetMachineTypes (rhbz#1097930)
  - qemu: caps: Sanitize storage of machine type related data (rhbz#1097930)
  - qemu: cap: Refactor access to array in virQEMUCapsProbeQMPMachineTypes (rhbz#1097930)
  - qemu: monitor: Add monitor API for device_add supporting JSON objects (rhbz#1097930)
  - qemu: monitor: Add do-while block to QEMU_CHECK_MONITOR_FULL (rhbz#1097930)
  - qemu: Improve error message in virDomainGetVcpus (rhbz#1097930)
  - qemu: domain: Rename qemuDomainDetectVcpuPids to qemuDomainRefreshVcpuInfo (rhbz#1097930)
  - qemu: monitor: Rename qemuMonitor(JSON|Text)GetCPUInfo (rhbz#1097930)
  - qemu: domain: Improve vCPU data checking in qemuDomainRefreshVcpu (rhbz#1097930)
  - qemu: domain: Simplify return values of qemuDomainRefreshVcpuInfo (rhbz#1097930)
  - internal: Introduce macro for stealing pointers (rhbz#1097930)
  - tests: qemucapabilities: Add data for qemu 2.7.0 (rhbz#1097930)
  - qemu: setcpus: Report better errors (rhbz#1097930)
  - qemu: setvcpus: Extract setting of maximum vcpu count (rhbz#1097930)
  - qemu: driver: Extract setting of live vcpu count (rhbz#1097930)
  - qemu: driver: Split out regular vcpu hotplug code into a function (rhbz#1097930)
  - conf: Provide error on undefined vcpusched entry (rhbz#1097930)
  - qemu: monitor: Return structures from qemuMonitorGetCPUInfo (rhbz#1097930)
  - qemu: monitor: Return struct from qemuMonitor(Text|Json)QueryCPUs (rhbz#1097930)
  - qemu: Add capability for query-hotpluggable-cpus command (rhbz#1097930)
  - qemu: Forbid config when topology based cpu count doesn't match the config (rhbz#1097930)
  - qemu: capabilities: Extract availability of new cpu hotplug for machine types (rhbz#1097930)
  - qemu: monitor: Extract QOM path from query-cpus reply (rhbz#1097930)
  - qemu: monitor: Add support for calling query-hotpluggable-cpus (rhbz#1097930)
  - qemu: monitor: Add algorithm for combining query-(hotpluggable-)-cpus data (rhbz#1097930)
  - tests: Add test infrastructure for qemuMonitorGetCPUInfo (rhbz#1097930)
  - tests: cpu-hotplug: Add data for x86 hotplug with 11+ vcpus (rhbz#1097930)
  - tests: cpu-hotplug: Add data for ppc64 platform including hotplug (rhbz#1097930)
  - tests: cpu-hotplug: Add data for ppc64 out-of-order hotplug (rhbz#1097930)
  - tests: cpu-hotplug: Add data for ppc64 without threads enabled (rhbz#1097930)
  - qemu: domain: Extract cpu-hotplug related data (rhbz#1097930)
  - qemu: domain: Prepare for VCPUs vanishing while libvirt is not running (rhbz#1097930)
  - util: Extract and rename qemuDomainDelCgroupForThread to virCgroupDelThread (rhbz#1097930)
  - conf: Add XML for individual vCPU hotplug (rhbz#1097930)
  - qemu: migration: Prepare for non-contiguous vcpu configurations (rhbz#1097930)
  - qemu: command: Add helper to convert vcpu definition to JSON props (rhbz#1097930)
  - qemu: process: Copy final vcpu order information into the vcpu definition (rhbz#1097930)
  - qemu: command: Add support for sparse vcpu topologies (rhbz#1097930)
  - qemu: Use modern vcpu hotplug approach if possible (rhbz#1097930)
  - qemu: hotplug: Allow marking unplugged devices by alias (rhbz#1097930)
  - qemu: hotplug: Add support for VCPU unplug (rhbz#1224341)
  - virsh: vcpuinfo: Report vcpu number from the structure rather than it's position (rhbz#1097930)
  - qemu: driver: Fix qemuDomainHelperGetVcpus for sparse vcpu topologies (rhbz#1097930)
  - doc: clarify documentation for vcpu order (rhbz#1097930)
  - conf: Don't validate vcpu count in XML parser (rhbz#1097930)
  - qemu: driver: Validate configuration when setting maximum vcpu count (rhbz#1370066)
  - conf: Fix build with picky GCC (rhbz#1097930)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-8
changelog:
  - util: storage: Properly set protocol type when parsing gluster json string (rhbz#1372251)
  - conf: Add IOThread quota and period scheduler/cputune defs (rhbz#1356937)
  - qemu: Add support to get/set IOThread period and quota cgroup values (rhbz#1356937)
  - network: new network forward mode 'open' (rhbz#846810)
  - virtlogd.socket: Tie lifecycle to libvirtd.service (rhbz#1372576)
  - cpu_x86: Fix minimum match custom CPUs on hosts with CMT (rhbz#1365500)
  - qemu: cgroup: Extract temporary relaxing of cgroup setting for vcpu hotplug (rhbz#1097930)
  - qemu: process: Fix start with unpluggable vcpus with NUMA pinning (rhbz#1097930)


author: Jiri Denemark <jdenemar@redhat.com> - 2.0.0-9
changelog:
  - Add helper for removing transient definition (rhbz#1368774)
  - qemu: Remove stale transient def when migration fails (rhbz#1368774)
  - qemu: Don't use query-migrate on destination (rhbz#1374613)
  - conf: allow hotplugging "legacy PCI" device to manually addressed PCIe slot (rhbz#1337490)
  - conf: Add support for virtio-net.rx_queue_size (rhbz#1366989)
  - qemu_capabilities: Introduce virtio-net-*.rx_queue_size (rhbz#1366989)
  - qemu: Implement virtio-net rx_queue_size (rhbz#1366989)
  - audit: Audit information about shmem devices (rhbz#1218603)
  - qemu: monitor: Use a more obvious iterator name (rhbz#1375783)
  - qemu: monitor: qemuMonitorGetCPUInfoHotplug: Add iterator 'anycpu' (rhbz#1375783)
  - qemu: monitor: Add vcpu state information to monitor data (rhbz#1375783)
  - qemu: domain: Don't infer vcpu state (rhbz#1375783)


author: Jiri Denemark <jdenemar@redhat.com> - 2.5.0-1
changelog:
  - Rebased to libvirt-2.5.0 (rhbz#1382640)
  - The rebase also fixes the following bugs:
      rhbz#1106416, rhbz#1106419, rhbz#1207095, rhbz#1247005, rhbz#1300776
      rhbz#1343858, rhbz#1347049, rhbz#1349898, rhbz#1354253, rhbz#1356769
      rhbz#1356881, rhbz#1357358, rhbz#1357416, rhbz#1358181, rhbz#1359135
      rhbz#1360533, rhbz#1365779, rhbz#1366108, rhbz#1366460, rhbz#1366505
      rhbz#1368351, rhbz#1368368, rhbz#1369633, rhbz#1370357, rhbz#1370360
      rhbz#1371039, rhbz#1371358, rhbz#1371758, rhbz#1372580, rhbz#1373535
      rhbz#1373783, rhbz#1373849, rhbz#1374718, rhbz#1375268, rhbz#1375424
      rhbz#1375524, rhbz#1375887, rhbz#1375920, rhbz#1375939, rhbz#1376009
      rhbz#1376083, rhbz#1377602, rhbz#1377913, rhbz#1378290, rhbz#1378401
      rhbz#1379196, rhbz#1379212, rhbz#1379895, rhbz#1382079, rhbz#1386976
      rhbz#1387665, rhbz#1387666, rhbz#1393854, rhbz#1396597, rhbz#1399260
      rhbz#1401054


author: Jiri Denemark <jdenemar@redhat.com> - 3.0.0-1
changelog:
  - Rebased to libvirt-3.0.0 (rhbz#1382640)
  - The rebase also fixes the following bugs:
      rhbz#1191901, rhbz#1257813, rhbz#1292984, rhbz#1300177, rhbz#1302168
      rhbz#1302171, rhbz#1332019, rhbz#1336564, rhbz#1349696, rhbz#1363586
      rhbz#1370357, rhbz#1373711, rhbz#1386466, rhbz#1396040, rhbz#1397940
      rhbz#1402690, rhbz#1402726, rhbz#1403691, rhbz#1404952, rhbz#1405269
      rhbz#1406442


author: Jiri Denemark <jdenemar@redhat.com> - 3.0.0-2
changelog:
  - Enable use of namespaces by default (rhbz#1382640)
  - virProcessRunInMountNamespace: Report errors from child
  - util: Introduce virFileReadLink
  - qemuDomainPrepareDisk: Fix ordering
  - qemuSecurityRestoreAllLabel: Don't use transactions
  - qemu_security: Use more transactions
  - qemuDomain{Attach,Detach}Device NS helpers: Don't relabel devices
  - qemuDomainCreateDevice: Properly deal with symlinks
  - qemuDomainCreateDevice: Don't loop endlessly
  - qemuDomainAttachDeviceMknod: Deal with symlinks
  - qemuDomainAttachDeviceMknod: Don't loop endlessly
  - qemuDomainAttachSCSIVHostDevice: Prefer qemuSecurity wrappers
  - qemuDomainAttachSCSIVHostDevice: manage /dev entry
  - qemu_security: Drop qemuSecuritySetRestoreAllLabelData struct
  - qemu_domain: Don't pass virDomainDeviceDefPtr to ns helpers
  - qemuDomainNamespaceSetupDisk: Drop useless @src variable
  - qemuDomainNamespace{Setup,Teardown}Disk: Don't pass pointer to full disk
  - qemuDomainDiskChainElement{Prepare,Revoke}: manage /dev entry
  - qemuDomainNamespaceSetupDisk: Simplify disk check
  - qemu_security: Introduce ImageLabel APIs


author: Jiri Denemark <jdenemar@redhat.com> - 3.1.0-1
changelog:
  - Rebased to libvirt-3.1.0 (rhbz#1382640)
  - The rebase also fixes the following bugs:
      rhbz#1268906, rhbz#1316774, rhbz#1330024, rhbz#1336564, rhbz#1343094
      rhbz#1344897, rhbz#1346566, rhbz#1349441, rhbz#1352529, rhbz#1374128
      rhbz#1375410, rhbz#1375417, rhbz#1378540, rhbz#1382640, rhbz#1383039
      rhbz#1397440, rhbz#1408701, rhbz#1410188, rhbz#1412834, rhbz#1414393
      rhbz#1417203, rhbz#1420205, rhbz#1420668, rhbz#1420718, rhbz#1421036


author: Jiri Denemark <jdenemar@redhat.com> - 3.1.0-2
changelog:
  - qemuDomainSaveImageUpdateDef: Don't overwrite errors from virDomainDefCheckABIStability (rhbz#1379200)
  - qemu_process: don't probe iothreads if it's not supported by QEMU (rhbz#1430258)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-1
changelog:
  - Rebased to libvirt-3.2.0 (rhbz#1382640)
  - The rebase also fixes the following bugs:
      rhbz#822148, rhbz#824989, rhbz#1004676, rhbz#1018251, rhbz#1181659
      rhbz#1181899, rhbz#1270403, rhbz#1292451, rhbz#1300769, rhbz#1329090
      rhbz#1366088, rhbz#1371617, rhbz#1372581, rhbz#1389313, rhbz#1398087
      rhbz#1404627, rhbz#1406791, rhbz#1408808, rhbz#1410225, rhbz#1415609
      rhbz#1422318, rhbz#1426176, rhbz#1428209, rhbz#1428893, rhbz#1429551
      rhbz#1430275, rhbz#1430634, rhbz#1430672, rhbz#1430679, rhbz#1431112
      rhbz#1431793, rhbz#1431852, rhbz#1433180, rhbz#1433183, rhbz#1434882
      rhbz#1436119, rhbz#1436999


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-2
changelog:
  - storage: Fix capacity value for LUKS encrypted volumes (rhbz#1371892)
  - qemu: Add device id for mediated devices on qemu command line (rhbz#1438431)
  - qemu: hotplug: Iterate over vcpu 0 in individual vcpu hotplug code (rhbz#1437013)
  - qemu: hotplug: Fix formatting strings in qemuDomainFilterHotplugVcpuEntities (rhbz#1437010)
  - qemu: hotplug: Clear vcpu ordering for coldplug of vcpus (rhbz#1437010)
  - qemu: hotplug: Add validation for coldplug of individual vcpus (rhbz#1437010)
  - qemu: hotplug: Validate that vcpu-hotplug does not break config (rhbz#1437010)
  - qemu: Split virQEMUCapsInitArchQMPBasic() (rhbz#1429509)
  - tests: Initialize basic capabilities properly (rhbz#1429509)
  - qemu: Remove redundant capabilities (rhbz#1429509)
  - qemu: Advertise ACPI support for aarch64 guests (rhbz#1429509)
  - qemu: Enforce ACPI, UEFI requirements (rhbz#1429509)
  - tests: Test ACPI, UEFI requirements (rhbz#1429509)
  - qemu: Fix regression when hyperv/vendor_id feature is used (rhbz#1439736)
  - qemu: Fix resource leak in qemuDomainAddChardevTLSObjects error path (rhbz#1300769)
  - qemu: Break endless loop if qemuMigrationResetTLS fails (rhbz#1300769)
  - qemu: Properly reset TLS in qemuProcessRecoverMigrationIn (rhbz#1425003)
  - qemu: Drop resume label in qemuProcessRecoverMigrationOut (rhbz#1425003)
  - qemu: Always reset TLS in qemuProcessRecoverMigrationOut (rhbz#1425003)
  - qemu: Don't reset TLS in qemuMigrationRun (rhbz#1425003)
  - qemu: Don't reset TLS in qemuMigrationCancel (rhbz#1425003)
  - qemu: Introduce qemuMigrationReset (rhbz#1425003)
  - qemu: Simplify qemuMigrationResetTLS (rhbz#1425003)
  - qemu: Properly reset all migration capabilities (rhbz#1425003)
  - qemu: Don't overwrite existing error in qemuMigrationReset (rhbz#1439130)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-3
changelog:
  - qemu: Fix mdev checking for VFIO support (rhbz#1441291)
  - pci: recognize/report GEN4 (PCIe 4.0) card 16GT/s Link speed (rhbz#1442831)
  - qemu: refactor qemuDomainMachine* functions (rhbz#1441964)
  - qemu: report IDE bus in domain capabilities only if it's supported (rhbz#1441964)
  - qemu: do not crash on USB address with no port and invalid bus (rhbz#1441589)
  - spec: Avoid RPM verification errors on nwfilter XMLs (rhbz#1378774)
  - conf: Add check for non scsi_host parent during vport delete (rhbz#1420740)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-4
changelog:
  - conf: add a new parse flag VIR_DOMAIN_DEF_PARSE_ABI_UPDATE_MIGRATION (rhbz#1373184)
  - qemu_domain: use correct default USB controller on ppc64 (rhbz#1373184)
  - qemu: hotplug: Unexport qemuDomainHotplugDelVcpu (rhbz#1439452)
  - qemu: hotplug: Don't save status XML when monitor is closed (rhbz#1439452)
  - util: check ifa_addr pointer before accessing its elements (rhbz#1444408)
  - util: allow ignoring SIOCSIFHWADDR when errno is EPERM (rhbz#1415609)
  - qemu: Ignore missing query-migrate-parameters (rhbz#1441934)
  - locking: Add support for sanlock_strerror (rhbz#1409511)
  - RHEL: spec: Require sanlock >= 3.5 (rhbz#1409511)
  - qemu: Properly reset non-p2p migration (rhbz#1425003)
  - qemu: Don't fail if physical size can't be updated in qemuDomainGetBlockInfo (rhbz#1442344)
  - qemu: process: Clean automatic NUMA/cpu pinning information on shutdown (rhbz#1445627)
  - qemu: process: Don't leak priv->usbaddrs after VM restart (rhbz#1445627)
  - qemu: process: Clean up priv->migTLSAlias (rhbz#1445627)
  - Add VIR_DOMAIN_JOB_OPERATION typed parameter (rhbz#1441563)
  - qemu: Report VIR_DOMAIN_JOB_OPERATION (rhbz#1441563)
  - conf: Rename mode parameter in virCPUDefParseXML (rhbz#1428952)
  - Add support for CPU cache specification (rhbz#1428952)
  - qemu: Add support for guest CPU cache (rhbz#1428952)
  - qemu: Don't reset "events" migration capability (rhbz#1441165)
  - qemu: Fix persistent migration of transient domains (rhbz#1446205)
  - Fix padding of encrypted data (rhbz#1447297)
  - cpu: Introduce virCPUCopyMigratable (rhbz#1444421)
  - qemu: Move common code in virQEMUCapsInitCPUModel one layer up (rhbz#1444421)
  - qemu: Add migratable parameter to virQEMUCapsInitCPUModel (rhbz#1444421)
  - qemu: Introduce virQEMUCapsSetHostModel (rhbz#1444421)
  - qemu: Move qemuCaps CPU data copying into a separate function (rhbz#1444421)
  - qemu: Introduce virQEMUCapsHostCPUDataClear (rhbz#1444421)
  - qemu: Move qemuCaps host CPU data in a struct (rhbz#1444421)
  - qemu: Prepare qemuCaps for multiple host CPU defs (rhbz#1444421)
  - qemu: Pass migratable host CPU model to virCPUUpdate (rhbz#1444421)
  - cpu: Drop feature filtering from virCPUUpdate (rhbz#1444421)
  - cpu: Introduce virCPUGetHostIsSupported (rhbz#1444421)
  - qemu: Use more data for comparing CPUs (rhbz#1444421)
  - qemu: don't kill qemu process on restart if networkNotify fails (rhbz#1442700)
  - network: better log message when network is inactive during reconnect (rhbz#1442700)
  - disk: Resolve issues with disk partition build/start checks (rhbz#1439132)
  - disk: Force usage of parted when checking disk format for "bsd" (rhbz#1439132)
  - storage: Modify storageBackendWipeLocal to allow zero from end of device (rhbz#1439132)
  - storage: Introduce virStorageBackendZeroPartitionTable (rhbz#1439132)
  - logical: Use virStorageBackendZeroPartitionTable (rhbz#1373711, rhbz#1439132)
  - logical: Increase the size of the data to wipe (rhbz#1373711, rhbz#1439132)
  - disk: Use virStorageBackendZeroPartitionTable (rhbz#1439132)
  - util: Add virNetDevSetCoalesce function (rhbz#1414627)
  - conf, docs: Add support for coalesce setting(s) (rhbz#1414627)
  - Set coalesce settings for domain interfaces (rhbz#1414627)
  - docs: fix typo in closing HTML element (rhbz#1414627)
  - Don't leak str in virDomainNetDefCoalesceParseXML (rhbz#1414627)
  - Remove pointless check for !ret in virDomainNetDefCoalesceParseXML (rhbz#1414627)
  - Define ETHTOOL_[GS]COALESCE when building on older kernels (rhbz#1414627)
  - qemu: change the logic of setting default USB controller (rhbz#1438682)
  - qemu: use nec-usb-xhci as a default controller for aarch64 if available (rhbz#1438682)
  - qemu: introduce QEMU_CAPS_DEVICE_QEMU_XHCI (rhbz#1438682)
  - qemu: add support for qemu-xhci USB controller (rhbz#1438682)
  - qemu: use qemu-xhci USB controller by default for ppc64 and aarch64 (rhbz#1438682)
  - util: make macvtap/macvlan generated name #defines available to other files (rhbz#1335798)
  - conf: don't ignore <target dev='blah'/> for macvtap interfaces (rhbz#1335798)
  - util: rename/move VIR_NET_GENERATED_PREFIX to be consistent (rhbz#1335798)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-5
changelog:
  - util: mdev: Use a local variable instead of a direct pointer access (rhbz#1446455)
  - mdev: Fix daemon crash on domain shutdown after reconnect (rhbz#1446455)
  - qemu: Provide a much clearer message on device hot-plug (rhbz#1450072)
  - virsh: Add --tls description for the virsh man page (rhbz#1448806)
  - conf: Check CPU cache for ABI stability (rhbz#1449595)
  - qemuDomainBuildNamespace: Move /dev/* mountpoints later (rhbz#1449510)
  - qemuDomainCreateDeviceRecursive: pass a structure instead of bare path (rhbz#1449510)
  - qemuDomainCreateDeviceRecursive: Don't try to create devices under preserved mount points (rhbz#1449510)
  - qemuDomainAttachDeviceMknodRecursive: Don't try to create devices under preserved mount points (rhbz#1449510)
  - qemuDomainDetachDeviceUnlink: Don't unlink files we haven't created (rhbz#1449510)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-6
changelog:
  - util: introduce virStringMatch (rhbz#1446980)
  - util: introduce virBufferEscapeRegex (rhbz#1446980)
  - qemu: improve detection of UNIX path generated by libvirt (rhbz#1446980)
  - Adding POWER9 cpu model to cpu_map.xml (rhbz#1450189)
  - qemu: driver: Allow passing disk target as top image with block commit (rhbz#1451394)
  - qemu: monitor: Don't bother extracting vCPU halted state in text monitor (rhbz#1452106)
  - conf: Don't assign value from ..TypeFromString directly to enum (rhbz#1452454)
  - nodedev: Make use of the compile-time missing enum in switch error (rhbz#1452072)
  - conf: nodedev: Split virNodeDeviceDefFormat into more functions (rhbz#1452072)
  - docs: Provide a nodedev driver stub documentation (rhbz#1452072)
  - mdev: Pass a uuidstr rather than an mdev object to some util functions (rhbz#1452072)
  - nodedev: conf: Split PCI sub-capability parsing to separate methods (rhbz#1452072)
  - nodedev: Introduce new mdev_types and mdev nodedev capabilities (rhbz#1452072)
  - nodedev: Introduce the mdev capability to a PCI parent device (rhbz#1452072)
  - nodedev: Introduce mdev capability for mediated devices (rhbz#1452072)
  - docs: Document the mediated devices within the nodedev driver (rhbz#1452072)
  - Do not release unreserved address in qemuDomainAttachRNGDevice (rhbz#1452581)
  - qemu: process: Clear priv->namespaces on VM shutdown (rhbz#1453142)
  - Revert "qemu: propagate bridge MTU into qemu "host_mtu" option" (rhbz#1449346)
  - qemu: Properly check return value of VIR_STRDUP in qemuDomainGetBlockIoTune (rhbz#1433183)
  - rpc: Bump maximum message size to 32M (rhbz#1440683)
  - Split out virDomainIOMMUDefFormat (rhbz#1427005)
  - qemu: allow conditional device property probing (rhbz#1427005)
  - qemu: refactor qemuBuildIOMMUCommandLine (rhbz#1427005)
  - conf: add <ioapic driver> to <features> (rhbz#1427005)
  - qemu: format kernel_irqchip on the command line (rhbz#1427005)
  - conf: add <driver intremap> to <iommu> (rhbz#1427005)
  - qemu: format intel-iommu, intremap on the command line (rhbz#1427005)
  - conf: add caching_mode attribute to iommu device (rhbz#1427005)
  - qemu: format caching-mode on iommu command line (rhbz#1427005)
  - conf: split out virDomainIOMMUDefCheckABIStability (rhbz#1427005)
  - conf: add ABI stability checks for IOMMU options (rhbz#1427005)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-7
changelog:
  - conf: Resolve corner case on fc_host deletion (rhbz#1420740)
  - pci: fix link maximum speed detection (rhbz#1455017)
  - qemu: Use correct variable in qemuDomainSetBlockIoTune (rhbz#1455510)
  - virsh: Track when create pkttyagent (rhbz#1374126)
  - conf: add eim attribute to <iommu><driver> (rhbz#1451282, rhbz#1289153)
  - qemu: format eim on intel-iommu command line (rhbz#1451282, rhbz#1289153)
  - rpc: Double buffer size instead of quadrupling buffer size. (rhbz#1440683)
  - rpc: Allow up to 256K records to be returned per domain from virConnectGetAllDomainStats. (rhbz#1440683)
  - nodedev: Increase the netlink socket buffer size to the one used by udev (rhbz#1450960, rhbz#1442307)
  - util: hostcpu: Correctly report total number of vcpus in virHostCPUGetMap (rhbz#1456793)
  - qemu: Report shutdown event details (rhbz#1384007)
  - qemu: json: Fix daemon crash on handling domain shutdown event (rhbz#1384007)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-8
changelog:
  - qemu: mkdir memory_backing_dir on startup (rhbz#1214369)
  - qemu: Don't error out if allocation info can't be queried (rhbz#1452045)
  - daemon: Don't initialize SASL context if not necessary (rhbz#1450095)
  - virDomainXMLOption: Introduce virDomainABIStabilityDomain (rhbz#1450349)
  - virQEMUDriverDomainABIStability: Check for memoryBacking (rhbz#1450349)
  - qemu: process: Save vcpu ordering information on reconnect (rhbz#1451251)
  - audit: Fix the output message for shmem (rhbz#1218603)
  - qemu: Set operation on completed migration job (rhbz#1457052)
  - qemu: Conditionally allow block-copy for persistent domains (rhbz#1459113)
  - virsh: Add support for VIR_DOMAIN_BLOCK_COPY_TRANSIENT_JOB (rhbz#1459113)
  - qemu: Fix serial stub console allocation (rhbz#1434278)
  - conf: Make error reporting in virCPUDefIsEqual optional (rhbz#1441662)
  - conf: Refactor virCPUDefParseXML (rhbz#1441662)
  - conf: Make virDomainSnapshotDefFormat easier to read (rhbz#1441662)
  - conf: Pass xmlopt to virDomainSnapshotDefFormat (rhbz#1441662)
  - qemu: Rename xml_len in virQEMUSaveHeader as data_len (rhbz#1441662)
  - qemu: Fix memory leaks in qemuDomainSaveImageOpen (rhbz#1441662)
  - qemu: Introduce virQEMUSaveData{New,Free} (rhbz#1441662)
  - qemu: Introduce virQEMUSaveDataFinish (rhbz#1441662)
  - qemu: Refactor qemuDomainSaveHeader (rhbz#1441662)
  - qemu: Introduce virQEMUSaveData structure (rhbz#1441662)
  - conf: Introduce virSaveCookie (rhbz#1441662)
  - conf: Add save cookie callbacks to xmlopt (rhbz#1441662)
  - qemu: Implement virSaveCookie object and callbacks (rhbz#1441662)
  - qemu: Store save cookie in save images and snapshots (rhbz#1441662)
  - qemu: Remember CPU def from domain start (rhbz#1441662)
  - qemu: Report the original CPU in migratable xml (rhbz#1441662)
  - qemu: Always send persistent XML during migration (rhbz#1441662)
  - qemu: Send updated CPU in migration cookie (rhbz#1441662)
  - qemu: Store updated CPU in save cookie (rhbz#1441662)
  - qemu: Use updated CPU when starting QEMU if possible (rhbz#1441662)
  - docs: correct improper information about domain states in virsh manpage (rhbz#1408778)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-10
changelog:
  - qemu: Set iface MTU on hotplug (rhbz#1408701)
  - Use a separate buffer for <input> subelements (rhbz#1283251)
  - Use a separate buffer for <disk><driver> (rhbz#1283251)
  - Use a separate buffer for <controller><driver> (rhbz#1283251)
  - Use a separate buffer for <filesystem><driver> (rhbz#1283251)
  - conf: introduce virDomainControllerDriverFormat (rhbz#1283251)
  - conf: add iotlb attribute to iommu (rhbz#1283251)
  - qemu: format device-iotlb on intel-iommu command line (rhbz#1283251)
  - qemuxml2xmltest: add virtio-options test (rhbz#1283251)
  - conf: use a leading space in virDomainVirtioNetDriverFormat (rhbz#1283251)
  - Add virtio-related options to interfaces (rhbz#1283251)
  - add virtio-related options to memballoon (rhbz#1283251)
  - Add virtio-related options to disks (rhbz#1283251)
  - Add virtio-related options to controllers (rhbz#1283251)
  - Add virtio-related options to filesystems (rhbz#1283251)
  - Add virtio-related options to rng devices (rhbz#1283251)
  - Add virtio-related options to video (rhbz#1283251)
  - Add virtio-related options to input devices (rhbz#1283251)
  - qemuxml2argvtest: add virtio-options test case (rhbz#1283251)
  - qemu: format virtio-related options on the command line (rhbz#1283251)
  - qemu: Allow memAccess for hugepages again (rhbz#1214369, rhbz#1458638)
  - qemu: Prefer hugepages over mem source='file' (rhbz#1214369)
  - qemu: Don't try to use hugepages if not enabled (rhbz#1214369)
  - qemu: Introduce qemuDomainDefFromXML helper (rhbz#1460952)
  - qemu: Add qemuDomainMigratableDefCheckABIStability (rhbz#1460952)
  - qemu: Add qemuDomainCheckABIStability (rhbz#1460952)
  - qemu: Use qemuDomainCheckABIStability where needed (rhbz#1460952)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-11
changelog:
  - util: storage: Output parsed network backing store string to debug log (rhbz#1461638)
  - util: storage: Add missing return to virStorageSourceParseBackingJSONGluster (rhbz#1461638)
  - util: storage: make virStorageSourceParseBackingJSONGlusterHost universal (rhbz#1461638)
  - util: storage: Add support for type 'inet' in virStorageSourceParseBackingJSONSocketAddress (rhbz#1461638)
  - util: storage: Split out parsing of TCP network host from JSON pseudoprotocol (rhbz#1461638)
  - util: storage: Report errors when source host data is missing (rhbz#1461638)
  - util: storage: Add JSON parser for new options in iSCSI protocol (rhbz#1461638)
  - util: storage: adapt to changes in JSON format for NBD (rhbz#1461638)
  - util: storage: adapt to changes in JSON format for ceph/rbd (rhbz#1461638)
  - util: storage: adapt to changes in JSON format for ssh (rhbz#1461638)
  - util: storage: adapt to changes in JSON format for sheepdog (rhbz#1461638)
  - qemu: Allow live-updates of coalesce settings (rhbz#1414627)
  - qemu: Pass the number of heads even with -vga qxl (rhbz#1283207)
  - util: storage: Export virStorageIsRelative (rhbz#1461303)
  - storage: Add helper to retrieve the backing store string of a storage volume (rhbz#1461303)
  - qemu: snapshot: Load data necessary for relative block commit to work (rhbz#1461303)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-14.el7_4.1
changelog:
  - qemu: Don't update CPU when checking ABI stability (rhbz#1470582)
  - cpu_x86: Properly disable unknown CPU features (rhbz#1470582)
  - qemu: Add qemuProcessFetchGuestCPU (rhbz#1470582)
  - qemu: Add qemuProcessVerifyCPU (rhbz#1470582)
  - qemu: Rename qemuProcessUpdateLiveGuestCPU (rhbz#1470582)
  - qemu: Add qemuProcessUpdateLiveGuestCPU (rhbz#1470582)
  - qemu: Export virQEMUCapsGuestIsNative (rhbz#1470582)
  - qemu: Move qemuProcessReconnect to the end of qemu_process.c (rhbz#1470582)
  - qemu: Update host-model CPUs on reconnect (rhbz#1470582)


author: Jiri Denemark <jdenemar@redhat.com> - 3.2.0-14.el7_4.2
changelog:
  - qemu: Fix qemuDomainGetBlockInfo allocation value setting (rhbz#1470127)
  - qemuDomainBuildNamespace: Handle special file mount points (rhbz#1471660)


author: Daniel P. Berrange <berrange@redhat.com> - 0.0.1-2
changelog:
  - Remove gjs-devel BR
  - Add missing ldconfig post/postun scripts
  - Fixed conditional to ensure python is disabled for Fedora >= 15


author: Christophe Fergeau <cfergeau@redhat.com> - 0.0.8-2
changelog:
  - Bump release number (no build pushed until there are more useful changes
    in there)
  - Fixed conditional to ensure vala bindings are built for Fedora >= 15
    and for RHEL > 6


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-1
changelog:
  - Rebased to libvirt-python-1.2.8 (rhbz#1116978)
  - libvirt-override: fix some build warnings (rhbz#1116978)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-2
changelog:
  - override: Fix two uninitialized variables in convertDomainStatsRecord (rhbz#1136354)
  - Rebuild to pick up the new flag for completed migration stats (rhbz#1138570)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-3
changelog:
  - generator: Free strings after libvirt_charPtrWrap (rhbz#1140998)
  - Rebuild to pick up the new flag for removing NVRAM files (rhbz#1144284)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-5
changelog:
  - Fix parsing of 'flags' argument for bulk stats functions (rhbz#1155016)
  - flags cannot get right value for blockCopy function (rhbz#1155484)
  - virDomainBlockCopy: initialize flags to 0 (rhbz#1155484)
  - implement new tunable event (rhbz#1147639)
  - RHEL: change version checking from 1.2.9 to 1.2.8 for tunable event (rhbz#1147639)
  - Check return value of libvirt_uintUnwrap (rhbz#1161039)
  - Rebuild libvirt-python to pick up new additions to libvirt.h (rhbz#1160792)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-6
changelog:
  - event: Add bindings for agent lifecycle event (rhbz#1167336)
  - RHEL-only: downgrade version check for agent lifecycle event (rhbz#1167336)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-7
changelog:
  - Rebuild libvirt-python to pick up the new flag for fetching backing chain statistics (rhbz#1175276)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.13-1
changelog:
  - Rebased to libvirt-python-1.2.13 (rhbz#1194594)
  - The rebase also fixes the following bugs:
      rhbz#1154918, rhbz#1175795, rhbz#1195848


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.14-1
changelog:
  - Rebased to libvirt-python-1.2.14 (rhbz#1194594)
  - The rebase also fixes the following bugs:
      rhbz#1198518


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.15-1
changelog:
  - Rebased to libvirt-python-1.2.15 (rhbz#1194594)
  - The rebase also fixes the following bugs:
      rhbz#1212168


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-1
changelog:
  - Rebased to libvirt-python-1.2.17 (rhbz#1194594)
  - The rebase also fixes the following bugs:
      rhbz#1194594, rhbz#1222795


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-2
changelog:
  - examples: Introduce nodestats example (rhbz#1051494)
  - iothread: Fix crash if virDomainGetIOThreadInfo returns error (rhbz#1248295)
  - Check return value of PyList_Append (rhbz#1249511)


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.2-1
changelog:
  - Rebased to libvirt-python-1.3.2 (rhbz#1286680)
  - The rebase also fixes the following bugs:
      rhbz#1311058


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.3-1
changelog:
  - Rebased to libvirt-python-1.3.3 (rhbz#1286680)
  - The rebase also fixes the following bugs:
      rhbz#


author: Jiri Denemark <jdenemar@redhat.com> - 1.3.4-1
changelog:
  - Rebased to libvirt-python-1.3.4 (rhbz#1286680)
  - The rebase also fixes the following bugs:
      rhbz#1286680, rhbz#1326839


author: Jiri Denemark <jdenemar@redhat.com> - 2.5.0-1
changelog:
  - Rebased to libvirt-python-2.5.0 (rhbz#1382642)
  - The rebase also fixes the following bugs:
      rhbz#1377071


author: Peter Hutterer <peter.hutterer@redhat.com> 0.3-4
changelog:
  - libwacom-0.3-add-list-devices.patch: add API to list devices
  - libwacom-0.3-add-udev-generator.patch: add a udev rules generater tool
  - libwacom-0.3-add-bamboo-one.patch: add Bamboo One definition


author: Olivier Fourdan <ofourdan@redhat.com> 0.3-5
changelog:
  - Mark data subpackage as noarch and make it a requirement for libwacom
  - Use generated udev rule file to list only known devices from libwacom
    database


author: Peter Hutterer <peter.hutterer@redhat.com> 0.5-2
changelog:
  - Fix gnome-control-center crash for Bamboo Pen & Touch
  - Generic styli needs to have erasers, default to two tools.


author: Rahul Sundaram <sundaram@fedoraproject.org> - 0.3.0-1
changelog:
  - upstream release 0.3.0
  - enable gif2webp
  - add build requires on giflib-devel and libtiff-devel
  - use make_install and hardened macros
  - list binaries explicitly


author: Jaromir Capik <jcapik@redhat.com> - 0.3.0-5
changelog:
  - Removing __PPC__ macro conflicting with __BYTE_ORDER__ endian check (#1127230)
  - Resolves: rhbz#1127230


author: Praveen K Paladugu <praveen_paladugu@dell.com> - 2.2.3-2
changelog:
  - Updated the spec file to adhere to the upstream standard of breaking
  - the package in server, client, lib modules 
  - randfile.patch: when openwsmand daemon creates a certificate the
  - first time it needs a file which have random content it. This
  - is pointed to $HOME/.rnd in /etc/openwsman/ssleay.cnf. Changed this
  - random file to /dev/urandom. 
  - initscript.patch: patch to edit the init script so that the services
  - are not started by default.


author: Praveen K Paladugu <praveen_paladugu@dell.com> - 2.2.3-3
changelog:
  - authors.patch: Moved all the AUTHORS info to AUTHORS file.
  - Corrected the Source tag.
  - Corrected the package dependencies to break cyclic dependencies.
  - Fixed the default attributes.
  - Fixed the preun & postun scripts, to make sure the openwsmand service
  -    is stopped before the package is removed.
  - Added 'condrestart' function to the init script.
  - Had to let the *.so files be part of the openwsman-server becuase
  -    some of the source files explicitly call out for *.so files.


author: Praveen K Paladugu <praveen_paladugu@dell.com> - 2.2.3-6
changelog:
  - Fixed the version checking of swig and forced all the ruby files to be 
  -   installed into site{lib,arch} dirs


author: Praveen K Paladugu <praveen_paladugu@dell.com> - 2.2.3-7
changelog:
  - Moved the certificate generation from init script. The user will have to 
  -   generate the certificate manually.


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.2.4-1
changelog:
  - Update to openwsman-2.2.4
  - Add help2man generated manpage for openwsmand binary
  - Add missing openwsman headers to libwsman-devel
  - Add configuration file to openwsman-client


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.3.6-7
changelog:
  - Fix bogus date in the %changelog
  - Build with full relro
  - Fix requires/provides
    Resolves: #881316


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.3.6-14
changelog:
  - Backport option for disabling various SSL protocols
    Resolves: #1190689
  - Fix curl_easy_setopt call for CURLOPT_SSL_VERIFYPEER/HOST
    Resolves: #1319949


author: Adam Jackson <ajax@redhat.com> 1.8.1-4
changelog:
  - --enable-xkb for weston
  - --disable-xprint instead of manual rm
  - BuildRequire an updated xcb-proto for XKB and DRI2 fixes


author: Rex Dieter <rdieter@fedoraproject.org> - 1.11-4
changelog:
  - fix fpath (use autoreconf -f)
  - -devel: tighten deps via %{?_isa}, drop Requires: pkgconfig (add explicit BR: pkgconfig)


author: Rex Dieter <rdieter@fedoraproject.org> - 0.4.2-1
changelog:
  - xkbcommon 0.4.2 (#1000497)
  - own %{_includedir}/xkbcommon/
  - -x11: +ldconfig scriptlets
  - -devel: don't include xkbcommon-x11.h
  - run reautoconf in %prep (instead of %build)
  - tighten subpkg deps via %_isa
  - .spec cleanup, remove deprecated stuff
  - BR: pkgconfig(xcb-xkb) >= 1.10


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libxkbfile to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.3-2
changelog:
  - Added "BuildRequires: pkgconfig" for (#193424)
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: parag <paragn@fedoraproject.org> - 1.0.4-4
changelog:
  - Merge-Review #226077
  - Removed XFree86-libs, xorg-x11-libs XFree86-devel, xorg-x11-devel as Obsoletes
  - Removed BR:pkgconfig
  - Removed zero-length AUTHORS README file


author: Miroslav Lichvar <mlichvar@redhat.com> 0-0.3.20121109git4e8107
changelog:
  - update to 20121109git4e8107
  - install unchanged default.cfg as ptp4l.conf
  - drop conflicts from phc2sys service


author: Miroslav Lichvar <mlichvar@redhat.com> 1.4-1.20140718gitbdb6a3
changelog:
  - update to 20140718gitbdb6a3 (#1108795, #1059039)
  - fix PIE linking (#1092537)
  - replace hardening build flags with _hardened_build
  - include simulation test suite


author: Miroslav Lichvar <mlichvar@redhat.com> 1.4-2.20140718gitbdb6a3
changelog:
  - add timemaster (#1085580)
  - send peer messages to correct address
  - make NTP SHM segment number configurable
  - update UDS handling to allow running multiple ptp4l/phc2sys instances
  - fix warnings from static analysis


author: Miroslav Lichvar <mlichvar@redhat.com> 1.4-3.20140718gitbdb6a3
changelog:
  - fix resetting of linreg servo (#1165045)
  - fix phc2sys automatic mode with multiple interfaces (#1108795)


author: Vivek Lakshmanan <vivekl@redhat.com> - 0:1.2.13-2jpp_1fc
changelog:
  - Merge spec and patches with latest from JPP.
  - Clean source tar ball off prebuilt jars and classes.
  - Use classpathx-jaf and jms for buildrequires for the time being.


author: Vivek Lakshmanan <vivekl@redhat.com> - 0:1.2.13-3jpp.1
changelog:
  - Re-sync with latest from JPP.
  - Update patch for BZ #157585 to apply cleanly.
  - Partially adopt new naming convention.


author: Vivek Lakshmanan <vivekl@redhat.com> 0:1.2.14-3jpp.1
changelog:
  - Upgrade to 1.2.14
  - Modify the categories for the .desktop files so they are only
    displayed under the development/programming menus
  - Resolves: bug 241447


author: Alexander Kurtakov <akurtako@redhat.com> 0:1.2.16-6
changelog:
  - Do not require jaxp_parser_impl. Maven build is not using it all and it's provided by every Java5 JVM.


author: Alexander Kurtakov <akurtako@redhat.com> 0:1.2.16-10
changelog:
  - Remove duplicate import-package declaration.
  - Adapt to current guidelines.
  - Remove no longer needed patches.


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:1.2.17-1
changelog:
  - Update to latest version
  - Change OSGI bundle symbolic name to org.apache.log4j
  - Resolves #826776


author: Java SIG <java-devel@lists.fedoraproject.org> - 0:1.2.17-7
changelog:
  - Update for https://fedoraproject.org/wiki/Fedora_19_Maven_Rebuild
  - Replace maven BuildRequires with maven-local


author: Preston Brown <pbrown@redhat.com> 3.5.6-1
changelog:
  - enable LFS support (debian bug #100810)
  - quote filenames for running compress commands or pre/postrotate cmds (#21348)
  - deprecate "errors" directive (see bug #16544 for explanation)
  - update man page
  - configurable compression command by Colm Buckley <colm@tuatha.org>


author: Preston Brown <pbrown@redhat.com> 3.6-1
changelog:
  - patch from Alexander Kourakos <awk@awks.org> to stop the shared
    postrotate/prerotate scripts from running if none of the log(s) need
    rotating.  All log files are now checked for rotation in one batch,
    rather than sequentially.
  - more fixes from Paul Martin <pm@debian.org>


author: Elliot Lee <sopwith@redhat.com> 3.6.2-1
changelog:
  - Fix bug #55809 (include logrotate.status in "files")
  - Fix bug #58328 (incorrect error detection when reading state file)
  - Allow 'G' size specifier from bug #57242


author: Erik Troan <ewt@redhat.com>
changelog:
  - always use compressext for the extension for compressed
    files; before compresscmd and compressext had to agree
  - moved all compression to one code block
  - compression, scripts don't use system() anymore
  - compress and maillast didn't work together properly
  - delaycompress and mailfirst didn't work properly
  - don't use system() for mailing (or uncompressing) logs anymore
  - use "-s" for speciying the subjected of mailed logs


author: Miloslav Trmac <mitr@redhat.com> - 3.7.1-2
changelog:
  - Fix sending mails (#131583)
  - Preserve file attributes when compressing files (#121523, original patch by
    Daniel Himler)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-11
changelog:
  - logrotate won't stop if there are some errors in configuration
    or glob failures (#166510, #182062)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-12
changelog:
  - fix problem with compress_options_list (#227706)
  - fix spec file to meet Fedora standards (#226104)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.5-2
changelog:
  - fix error hadnling after prerotate, postrotate, firstaction 
    script failure. (http://qa.mandriva.com/show_bug.cgi?id=29979)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.5-4
changelog:
  - use dateext in the default config file (#240292)
  - add options to use shred for deleting files -- adapt patch sent by
    Peter Eckersley <pde@eff.org> (#239934)
  - ignore .cfsaved files by default (#223476)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-1
changelog:
  - new upstream version
  - fix #248565 logrotate never rotates /var/log/btmp
  - fix compile warnings
  - tabooext accepts wildcards (related #247816)
  - fix minor errors and update man page (related #250059)
  - fix handling of size directive (related #247410)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-2
changelog:
  - fix #427274 - logrotate fails to preserve SELinux file contexts
  - fix #427661 - SELinux stops vsftpd from working correctly


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-12
changelog:
  - fix #602643 - update manpage to reflect scripts changes
  - fix #606675 - pass currently rotated file as argument to
    postrotate/prerotate script in nosharedscripts mode


author: Jan Kaluza <jkaluza@redhat.com> 3.7.9-5
changelog:
  - fix #661181 - fixed SIGBUS when config file is empty or 4096 bytes
  - fix #666677 - preserve ACLs when rotating files


author: Jan Kaluza <jkaluza@redhat.com> - 3.8.6-5
changelog:
  - mention copy/copytruncate/renamecopy influence to olddir option (#1175292)
  - delete last log when dateformat cannot be sorted alphabetically (#1174208)
  - mark cron.daily/logrotate as config file (#1174207)
  - create olddir diectory if it does not exist (#1187161)


author: Jan Kaluza <jkaluza@redhat.com> - 3.8.6-8
changelog:
  - fix #1201252 - delete unused entries in state file, fix bad performance
    with big state file
  - fix #1272236 - move logrotate.status to /var/lib/logrotate and add it to rwtab.d


author: Kamil Dudka <kdudka@redhat.com> - 3.8.6-10
changelog:
  - fix #1192936 - provide diagnostic in case log does not need rotating
  - fix #1321980 - do not exit if status file is corrupted


author: Kamil Dudka <kdudka@redhat.com> - 3.8.6-13
changelog:
  - fix #1393247 - migration of state file from previous versions of logrotate
  - fix #1374331 - preserve SELinux context with 'compress' and 'sharedscripts'
  - fix #1377335 - make 'createolddir' preserve sticky bit
  - fix #1369438 - heap buffer overflow when using long date format
  - fix #1375638 - make olddir respect the missingok flag


author: Kamil Dudka <kdudka@redhat.com> - 3.8.6-14
changelog:
  - fix #1381719 - make /var/lib/logrotate/logrotate.status the default state file
  - fix #1387533 - make 'su' directive accept usernames starting with digits


author: Martin Gracik <mgracik@redhat.com> 0.2-2
changelog:
  - Fix the gnome themes
  - Add biosdevname package
  - Edit .bash_history file
  - Add the initrd and kernel lines to .treeinfo
  - Don't remove the gamin package from installtree


author: Martin Gracik <mgracik@redhat.com> 0.3-1
changelog:
  - Don't remove libmount package
  - Don't create mtab symlink, already exists
  - Exit with error if we have no lang-table
  - Fix file logging
  - Overwrite the /etc/shadow file
  - Use [images-xen] section for PAE and xen kernels


author: Martin Gracik <mgracik@redhat.com> 0.4-1
changelog:
  - Add the images-xen section to treeinfo on x86_64
  - Print a message when no arguments given (#684463)
  - Mako template returns unicode strings (#681003)
  - The check option in options causes ValueError
  - Disable all ctrl-alt-arrow metacity shortcuts
  - Remove the locale-archive explicitly
  - Use xz when compressing the initrd
  - Keep the source files for locales and get rid of the binary form
  - Add /sbin to $PATH (for the tty2 terminal)
  - Create /var/run/dbus directory in installtree
  - Add mkdir support to template
  - gpart is present only on i386 arch (#672611)
  - util-linux-ng changed to util-linux


author: Martin Gracik <mgracik@redhat.com> 0.5-1
changelog:
  - Remove pungi patch
  - Remove pseudo code
  - Add a /bin/login shim for use only in the installation environment.
  - Set the hostname from a config file, not programmatically.
  - Add systemd and agetty to the installation environment.
  - Specify "cpio -H newc" instead of "cpio -c".
  - Provide shutdown on s390x (#694518)
  - Fix arch specific requires in spec file
  - Add s390 modules and do some cleanup of the template
  - Generate ssh keys on s390
  - Don't remove tr, needed for s390
  - Do not check if we have all commands
  - Change location of addrsize and mk-s390-cdboot
  - Shutdown is in another location
  - Do not skip broken packages
  - Don't install network-manager-netbook
  - Wait for subprocess to finish
  - Have to call os.makedirs
  - images dir already exists, we just need to set it
  - Do not remove libassuan.
  - The biarch is a function not an attribute
  - Create images directory in outputtree
  - Use gzip on ppc initrd
  - Create efibootdir if doing efi images
  - Get rid of create_gconf().
  - gconf/metacity: have only one workspace.
  - Add yum-langpacks yum plugin to anaconda environment (notting)
  - Replace variables in yaboot.conf
  - Add sparc specific packages
  - Skip keymap creation on s390
  - Copy shutdown and linuxrc.s390 on s390
  - Add packages for s390
  - Add support for sparc
  - Use factory to get the image classes
  - treeinfo has to be addressed as self.treeinfo
  - Add support for s390
  - Add the xen section to treeinfo on x86_64
  - Fix magic and mapping paths
  - Fix passing of prepboot and macboot arguments
  - Small ppc fixes
  - Check if the file we want to remove exists
  - Install x86 specific packages only on x86
  - Change the location of zImage.lds
  - Added ppc specific packages
  - memtest and efika.forth are in /boot
  - Add support for ppc
  - Minor sparc pseudo code changes
  - Added sparc pseudo code (dgilmore)
  - Added s390 and x86 pseudo code
  - Added ppc pseudo code


author: Will Woods <wwoods@redhat.com> 17.0-1
changelog:
  - Merges the 'treebuilder' branch of lorax
  - images are split into two parts again (initrd.img, LiveOS/squashfs.img)
  - base memory use reduced to ~200M (was ~550M in F15, ~320MB in F16)
  - initrd.img is now built by dracut
  - booting now requires correct "root=live:..." argument
  - boot.iso is EFI hybrid capable (copy iso to USB stick, boot from EFI)
  - Better support for Apple EFI (now with custom boot icon!)
  - new syslinux config (#734170)
  - add fpaste to installer environment (#727842)
  - rsyslog.conf: hardcode hostname for virtio forwarding (#744544)
  - Use a predictable ISO Volume Label (#732298)
  - syslinux-vesa-splash changed filename (#739345)
  - don't create /etc/sysconfig/network (#733425)
  - xauth and libXmu are needed for ssh -X (#731046)
  - add libreport plugins (#729537), clean up libreport
  - keep nss certs for libreport (#730438)
  - keep ModemManager (#727946)
  - keep vmmouse binaries (#723831)
  - change isbeta to isfinal, default to isFinal=False (#723901)
  - use pungi's installroot rather than making our own (#722481)
  - keep ntfsresize around (#722711)
  - replace cjkuni-uming-fonts with wqy-microhei-fonts (#709962)
  - install all firmware packages (#703291, #705392)
  - keep libmodman and libproxy (#701622)
  - write the lorax verion in the .buildstamp (#689697)
  - disable rsyslogd rate limiting on imuxsock (#696943)
  - disable debuginfo package


author: Brian C. Lane <bcl@redhat.com> 17.1-1
changelog:
  - lorax: check for output directory early and quit (bcl)
  - lorax: Add --proxy command (bcl)
  - lorax: add --config option (bcl)
  - Modify spec file for livemedia-creator (bcl)
  - Add no-virt mode to livemedia-creator (bcl)
  - Add livemedia-creator README and example ks (bcl)
  - Add config files for live media (bcl)
  - Add livemedia-creator (bcl)
  - Allow a None to be passed as size to create_runtime (bcl)
  - Add execWith utils from anaconda (bcl)
  - Changes needed for livecd creation (bcl)
  - dracut has moved to /usr/bin (bcl)


author: Martin Gracik <mgracik@redhat.com> 17.2-1
changelog:
  - Allow specifying buildarch on the command line (#771382) (mgracik)
  - lorax: Don't touch /etc/mtab in cleanup (bcl)
  - Update TODO and POLICY to reflect the current state of things (wwoods)
  - consider %ghost files part of the filelists in templates (wwoods)
  - lorax: Add option to exclude packages (bcl)
  - dracut needs kbd directories (#769932) (bcl)
  - better debug, handle relative output paths (bcl)


author: Brian C. Lane <bcl@redhat.com> 17.3-1
changelog:
  - keep convertfs.sh script in image (#787893) (bcl)
  - Add dracut convertfs module (#787893) (bcl)
  - fix templates to work with F17 usrmove (tflink)
  - changing hfs to hfsplus so that the correct mkfs binary is called (tflink)
  - Add luks, md and dm dracut args to bootloaders (bcl)
  - update lorax and livemedia_creator to use isfinal (bcl)
  - lorax: copy kickstarts into sysroot (#743135) (bcl)
  - livemedia-creator: Mount iso if rootfs is LiveOS (bcl)
  - Log output of failed command (mgracik)
  - Add packages required for gtk3 and the new anaconda UI. (clumens)


author: Brian C. Lane <bcl@redhat.com> 18.0-1
changelog:
  - use --prefix=/run/initramfs when building initramfs (wwoods)
  - dhclient-script needs cut and arping (bcl)
  - Fix missing CalledProcessError import (bcl)
  - metacity now depends on gsettings-desktop-schemas (bcl)
  - Add findiso to grub config (mjg)
  - add memtest to the boot.iso for x86 (#787234) (bcl)
  - Don't use mk-s390-cdboot (dhorak) (mgracik)
  - Add dracut args to grub.conf (bcl)
  - Change the squashfs image section in .treeinfo (mgracik)
  - Add path to squashfs image to the treeinfo (mgracik)
  - Add runtime basename variable to the template (mgracik)
  - use internal implementation of the addrsize utility (dan)
  - Make sure var/run is not a symlink on s390x (#787217) (mgracik)
  - Create var/run/dbus directory on s390x (#787217) (mgracik)


author: Brian C. Lane <bcl@redhat.com> 18.1-1
changelog:
  - livemedia-creator: update README (bcl)
  - example livemedia kickstart for ec2 (bcl)
  - livemedia-creator: console=ttyS0 not /dev/ttyS0 (bcl)
  - livemedia-creator: Add support for making ami images (bcl)
  - Don't remove btrfs utils (#796511) (mgracik)
  - Remove root and ip parameters from generic.prm (#796572) (mgracik)
  - Check if the volume id is not longer than 32 chars (#786832) (mgracik)
  - Add option to specify volume id on command line (#786834) (mgracik)
  - Install nhn-nanum-gothic-fonts (#790266) (mgracik)
  - Change the locale to C (#786833) (mgracik)
  - iputils is small and required by dhclient-script (bcl)
  - util-linux-ng is now util-linux (bcl)


author: Brian C. Lane <bcl@redhat.com> 18.2-1
changelog:
  - Merge noloader commits from f17-branch (bcl)
  - mkefiboot: Make Apple boot images appear in the startup preferences (mjg)
  - add symlink from /mnt/install -> /run/install (wwoods)
  - Don't trash all the initscripts 'fedora*' services (wwoods)
  - remove anaconda-copy-ks.sh (wwoods)
  - add anaconda dracut module (wwoods)
  - runtime-postinstall: remove references to loader (wwoods)
  - runtime-postinstall: remove keymap stuff (wwoods)
  - Add the icfg package (#771733) (mgracik)
  - Log the output of mkfs (#769928) (mgracik)
  - Fix product name replacing in templates (#799919) (mgracik)
  - Fix requires (mgracik)
  - use cache outside the installtree (bcl)
  - add iscsi-initiator-utils (#804522) (bcl)
  - livemedia-creator: update TreeBuilder use for isolabel (bcl)


author: Brian C. Lane <bcl@redhat.com> 18.3-1
changelog:
  - Added BCM4331 firmware (#817151) (mgracik)
  - mkefiboot: Add support for disk label files (mjg)
  - Add 'tmux' to runtime image (wwoods)
  - Add /etc/sysctl.d/anaconda.conf, set kernel.printk=1 (#816022) (wwoods)
  - reduce image size from 2GB to 1GB (wwoods)
  - keep all filesystem tools (wwoods)
  - Leave some of the grub2 utilities in the install image (#749323) (mgracik)
  - add media check menu option (bcl)
  - remove unneeded dracut bootargs (bcl)
  - mkefiboot: Copy Mac bootloader, rather than linking it (mjg)
  - Remove workdir if it was created by lorax (#807964) (mgracik)
  - add gdisk to install image (#811083) (bcl)
  - Don't use --allbut for xfsprogs cleanup (#804779) (mgracik)
  - Log all removed files (mgracik)
  - Add spice-vdagent to initrd (#804739) (mgracik)
  - Add ntfs-3g to initrd (#804302) (mgracik)
  - ntfs-3g now uses /usr/lib (#810039) (bcl)


author: Martin Gracik <mgracik@redhat.com> 18.4-1
changelog:
  - Initialized to use tito.
  - Use gz not bz2 for source
  - remove 'loadkeys' stub (#804306)
  - add name field to .treeinfo its a concatination of family and version
  - Fix typo in help (#819476)
  - include the new cmsfs-fuse interface
  - linuxrc.s390 is dead in anaconda
  - Add the ppc magic file
  - Install proper branding packages from repo (#813969)
  - Use --mac for isohybrid only if doing macboot images
  - Add --nomacboot option
  - Add packages needed for NTP functionality in the installer
  - livemedia-creator: check kickstart for display modes (#819660)
  - livemedia-creator: Removed unused ImageMount class
  - livemedia-creator: cleanup after a crash
  - livemedia-creator: start using /var/tmp instead of /tmp
  - livemedia-creator: make libvirt module optional
  - stop moving /run (#818918)


author: Martin Gracik <mgracik@redhat.com> 18.5-1
changelog:
  - Don't remove sha256sum from the install image (mgracik@redhat.com)
  - Check if selinux is not in Enforcing mode (#824835) (mgracik@redhat.com)
  - Install rpcbind (#824835) (mgracik@redhat.com)
  - Remove hfsplus-tools dependency (#818913) (mgracik@redhat.com)
  - Copy mapping and magic to BOOTDIR on ppc (#815550) (mgracik@redhat.com)
  - Automatic commit of package [lorax] release [18.4-1]. (mgracik@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.6-1
changelog:
  - Fix the rpm call (mgracik@redhat.com)
  - Use selinux python module to get enforcing mode (mgracik@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.7-1
changelog:
  - Comment on why selinux needs to be in permissive or disabled
    (mgracik@redhat.com)
  - Verify the yum transaction (mgracik@redhat.com)
  - Do not remove shared-mime-info (#825960) (mgracik@redhat.com)
  - Add a --required switch to installpkg (mgracik@redhat.com)
  - livemedia-creator: Hook up arch option (bcl@redhat.com)
  - livemedia-creator: Add appliance creation (bcl@redhat.com)
  - livemedia-creator: handle failed mount for ami (bcl@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.8-1
changelog:
  - Check if selinux is enabled before getting the mode (mgracik@redhat.com)
  - Add grub2 so that rescue is more useful (bcl@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.9-1
changelog:
  - Add initial support for ARM based systems (dmarlin) (mgracik@redhat.com)
  - Add plymouth to the installer runtime (wwoods@redhat.com)
  - add 'systemctl' command and use it in postinstall (wwoods@redhat.com)
  - add dracut-shutdown.service (and its dependencies) (wwoods@redhat.com)
  - leave pregenerated locale files (save RAM) (wwoods@redhat.com)
  - runtime-cleanup: log broken symlinks being removed (wwoods@redhat.com)
  - Add some documentation to LoraxTemplateRunner (wwoods@redhat.com)
  - fix '-runcmd' and improve logging (wwoods@redhat.com)
  - mkefiboot: add --debug (wwoods@redhat.com)
  - pylorax.imgutils: add retry loop and "lazy" to umount() (wwoods@redhat.com)
  - pylorax.imgutils: add debug logging (wwoods@redhat.com)
  - pylorax: set up logging as recommended by logging module (wwoods@redhat.com)
  - remove dmidecode (wwoods@redhat.com)
  - clean up net-tools properly (wwoods@redhat.com)
  - runtime-cleanup: correctly clean up kbd (wwoods@redhat.com)
  - runtime-cleanup: correctly clean up iproute (wwoods@redhat.com)
  - runtime-cleanup: drop a bunch of do-nothing removals (wwoods@redhat.com)
  - Create missing /etc/fstab (wwoods@redhat.com)
  - Fix systemd unit cleanup in runtime-postinstall (wwoods@redhat.com)
  - Disable Alt+Tab in metacity (mgracik@redhat.com)
  - Add pollcdrom module to dracut (bcl@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.10-1
changelog:
  - Don't set a root= argument (wwoods@redhat.com)
    Resolves: rhbz#837208
  - Don't remove the id tool (mgracik@redhat.com)
    Resolves: rhbz#836493
  - Xauth is in bin (mgracik@redhat.com)
    Resolves: rhbz#837317
  - Actually add plymouth to the initramfs (wwoods@redhat.com)
  - don't use --prefix with dracut anymore (wwoods@redhat.com)
  - newui requires checkisomd5 to run media check. (clumens@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.12-1
changelog:
  - Add 'mvebu' to list of recognized ARM kernels. (dmarlin@redhat.com)
  - Cleanup boot menus (#809663) (mgracik@redhat.com)
  - Don't remove chvt from the install image (#838554) (mgracik@redhat.com)
  - Add llvm-libs (#826351) (mgracik@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.13-1
changelog:
  - Add a command line option to override the ARM platform. (dmarlin@redhat.com)
  - Don't remove krb5-libs (#848227) (mgracik@redhat.com)
  - Add grub2-efi support and Secure Boot shim support. (pjones@redhat.com)
  - Fix GPT code to allocate space for /2/ tables. (pjones@redhat.com)
  - Add platforms to the treeinfo for Beaker support. (dmarlin@redhat.com)
  - add logging to lorax (bcl@redhat.com)
  - move live templates into their own subdir of share (bcl@redhat.com)
  - clean up command execution (bcl@redhat.com)
  - livemedia-creator: cleanup logging a bit (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.14-1
changelog:
  - remove cleanup of some essential libraries (bcl@redhat.com)
  - Mask the tmp.mount service to avoid tmpfs (jkeating@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.15-1
changelog:
  - change grub-cd.efi to gcdx64.efi (#851326) (bcl@redhat.com)
  - use wildcard for product path to efi binaries (#851196) (bcl@redhat.com)
  - Add yum-plugin-fastestmirror (#849797) (bcl@redhat.com)
  - livemedia-creator: update templates for grub2-efi support (bcl@redhat.com)
  - imgutils: fix umount retry handling (bcl@redhat.com)
  - livemedia-creator: use stage2 instead of root (bcl@redhat.com)
  - livemedia-creator: add location option (bcl@redhat.com)
  - nm-connection-editor was moved to separate package (#849056)
    (rvykydal@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.17-1
changelog:
  - use inst.stage2=hd:LABEL (#848641) (bcl@redhat.com)
  - Disable the maximize/unmaximize key bindings (#853410). (clumens@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.18-1
changelog:
  - Keep the dracut-lib.sh around for runtime (#851362) (jkeating@redhat.com)
  - X needs the DRI drivers (#855289) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.19-1
changelog:
  - There's no lang-table in anaconda anymore (#857925) (mgracik@redhat.com)
  - add convienience functions for running commands (bcl@redhat.com)
  - restore CalledProcessError handling (bcl@redhat.com)
  - add CalledProcessError to execWith* functions (bcl@redhat.com)
  - live uses root not inst.stage2 (bcl@redhat.com)
  - Revert "X needs the DRI drivers" (#855289) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.20-1
changelog:
  - Remove grub 0.97 splash (bcl@redhat.com)
  - livemedia-creator: use rd.live.image instead of liveimg (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.21-1
changelog:
  - Change the install user's shell for tmux (jkeating@redhat.com)
  - Set permissions on the initrd (#863018) (mgracik@redhat.com)
  - Remove the default word from boot menu (#848676) (mgracik@redhat.com)
  - Disable a whole bunch more keyboard shortcuts (#863823). (clumens@redhat.com)
  - use /var/tmp instead of /tmp (bcl@redhat.com)
  - remove rv from unmount error log (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.22-1
changelog:
  - Install the yum-langpacks plugin (#868869) (jkeating@redhat.com)
  - perl is required by some low-level tools on s390x (#868824) (dan@danny.cz)


author: Brian C. Lane <bcl@redhat.com> 18.23-1
changelog:
  - remove multipath rules (#880263) (bcl@redhat.com)
  - add installupgradeinitrd function and use it to install the upgrade initrds
    (dennis@ausil.us)
  - use installinitrd to install the upgrade.img initramfs so that we get correct
    permissions (dennis@ausil.us)
  - ppc and arm need to use kernel.upgrade not kernel.upgrader (dennis@ausil.us)
  - remove upgrade from the sparc and sysylinux config templates
    (dennis@ausil.us)
  - Add the 'fedup' plymouth theme if available (wwoods@redhat.com)
  - make templates install upgrade.img (wwoods@redhat.com)
  - build fedup upgrade.img (wwoods@redhat.com)
  - treebuilder: improve findkernels() initrd search (wwoods@redhat.com)
  - treebuilder: add 'prefix' to rebuild_initrds() (wwoods@redhat.com)
  - Add thai-scalable-waree-fonts (#872468) (mgracik@redhat.com)
  - Do not remove the fipscheck package (#882153) (mgracik@redhat.com)
  - Add MokManager.efi to EFI/BOOT (#882101) (mgracik@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.24-1
changelog:
  - imgutils: use -s for kpartx, wait for device creation (bcl@redhat.com)
  - livemedia-creator: Use SELinux Permissive mode (bcl@redhat.com)
  - livemedia-creator: use cmdline mode (bcl@redhat.com)
  - use correct variable for upgrade image on s390 (dan@danny.cz)
  - only ix86/x86_64 and ppc/ppc64 need grub2 (dan@danny.cz)
  - no mount (sub-)package since RHEL-2 (dan@danny.cz)
  - Correct argument to installupgradeinitrd. (dmarlin@redhat.com)
  - Added fedup requires to spec (bcl@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.25-1
changelog:
  - Add --noupgrade option (mgracik@redhat.com)
  - Require fedup-dracut* only on Fedora. (dmach@redhat.com)


author: Martin Gracik <mgracik@redhat.com> 18.28-1
changelog:
  - Fix rexists (mgracik@redhat.com)
  - Several 'doupgrade' fixes in the x86 template. (dmach@redhat.com)
  - Missing semicolon (mgracik@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 18.30-1
changelog:
  - yum changed the callback info (bcl@redhat.com)
  - tigervnc-server-module depends on Xorg, which doesn't exist on s390x
    (dan@danny.cz)
  - tools not existing on s390x (dan@danny.cz)
  - specspo is dead for a long time (dan@danny.cz)
  - no Xorg on s390x (dan@danny.cz)
  - Make boot configs consistent. (dmach@redhat.com)
  - Dynamically generate the list of installed platforms for .treeinfo
    (dmarlin@redhat.com)
  - Add a U-Boot wrapped image of 'upgrade.img'. (dmarlin@redhat.com)
  - Add trigger for Anaconda's exception handling to bash_history
    (vpodzime@redhat.com)
  - livemedia-creator: update example kickstarts (bcl@redhat.com)
  - livemedia-creator: don't pass console=ttyS0 (bcl@redhat.com)
  - Fix gcdx64.efi path to work for other distros than Fedora. (dmach@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.0-1
changelog:
  - New Version 19.0
  - Remove some env variables (#907692) (bcl@redhat.com)
  - Make sure tmpfs is enabled (#908253) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.1-1
changelog:
  - Print & log messages on scriptlet/transaction errors (wwoods@redhat.com)
  - sysutils: add -x to cp in linktree (wwoods@redhat.com)
  - treebuilder: fix "Can't stat exclude path "/selinux"..." message
    (wwoods@redhat.com)
  - runtime: install dracut-{nohostonly,norescue} (wwoods@redhat.com)
  - runtime-install: install shim-unsigned (wwoods@redhat.com)
  - Add explicit install of net-tools (#921619) (bcl@redhat.com)
  - Don't remove hmac files for ssh and sshd (#882153) (bcl@redhat.com)
  - Raise an error when there are no initrds (bcl@redhat.com)
  - Add yum logging to yum.log (bcl@redhat.com)
  - remove sparc support (dennis@ausil.us)
  - Change Makefile to produce .tgz (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.2-1
changelog:
  - Let devices get detected and started automatically. (dlehman@redhat.com)
  - Fix import of version (bcl@redhat.com)
  - fix version query and add one to the log file (hamzy@us.ibm.com)
  - Do not remove files required by tools from the s390utils-base package.
    (jstodola@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.3-1
changelog:
  - Remove /var/log/journal so journald won't write to overlay
    (wwoods@redhat.com)
  - Leave /etc/os-release in the initrd (#956241) (bcl@redhat.com)
  - no standalone modutils package (dan@danny.cz)
  - remove no longer supported arm kernel variants add the new lpae one
    (dennis@ausil.us)
  - livemedia-creator: Update example kickstarts (bcl@redhat.com)
  - livemedia-creator: Ignore rescue kernels (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.4-1
changelog:
  - Add command for opening anaconda log file to history (mkolman@gmail.com)
  - Do not install chrony and rdate explicitly (vpodzime@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.5-1
changelog:
  - Let sshd decide which keys to create (#971856) (bcl@redhat.com)
  - Don't remove thbrk.tri (#886250) (bcl@redhat.com)
  - Switch from xorg-x11-fonts-ethiopic to sil-abyssinica-fonts (#875664)
    (bcl@redhat.com)
  - Make ignoring yum_lock messages in anaconda easier. (clumens@redhat.com)
  - Bump image size up to 2G (#967556) (bcl@redhat.com)
  - livemedia-creator: Fix logic for anaconda test (#958036) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6-1
changelog:
  - Add manpage for lorax (bcl@redhat.com)
  - Add manpage for livemedia-creator (bcl@redhat.com)
  - livemedia-creator: pass inst.cmdline for headless installs (#985487)
    (bcl@redhat.com)
  - Stop using /usr/bin/env (#987028) (bcl@redhat.com)
  - livemedia-creator: clarify required package errors (#985340) (bcl@redhat.com)
  - Include device-mapper-persistent-data in images for thinp support.
    (dlehman@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.2-1
changelog:
  - dracut-nohostonly and dracut-norescue got renamed for dracut >= 030 (#990305)
    (harald@redhat.com)
  - Don't remove xkeyboard-config message files (#989757) (dshea@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.4-1
changelog:
  - livemedia-creator: Fix gcdx64.efi path to work for other distros than Fedora
    (#1003078) (bcl@redhat.com)
  - livemedia-creator: Update example kickstart for rhel7 (#922064)
    (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.6-1
changelog:
  - livemedia-creator: Update minimal packages in README (#1003078) (bcl@redhat.com)
  - macboot defaults to no on rhel7 (#1012529) (bcl@redhat.com)
  - Add macboot option (#1012529) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.8-1
changelog:
  - Set UEFI defaults to match BIOS (#1021451,#1021446) (bcl@redhat.com)
    Resolves: rhbz#1021451
    Resolves: rhbz#1021446
  - livemedia-creator: Set default name to Red Hat Enterprise Linux 7 (#1002027)
    (bcl@redhat.com)
    Resolves: rhbz#1002027
  - livemedia-creator: Add minimal disk example kickstart (#1019728)
    (bcl@redhat.com)
    Resolves: rhbz#1019728


author: Brian C. Lane <bcl@redhat.com> 19.6.16-1
changelog:
  - Activate anaconda-shell@.service on switch to empty VT (#980062)
    (wwoods@redhat.com)
  - flush data to disk after mkfsimage (#1052175) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.17-1
changelog:
  - Don't activate default auto connections after switchroot (#1012511)
    (rvykydal@redhat.com)
    Related: rhbz#1012511


author: Brian C. Lane <bcl@redhat.com> 19.6.19-1
changelog:
  - livemedia-creator: virt-image needs ram in MiB not KiB (#1061773)
    (bcl@redhat.com)
  - Include all the example kickstarts (#1019728) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.21-1
changelog:
  - Check initrd size on ppc64 and warn (#1060691) (bcl@redhat.com)
  - Remove drivers and modules on ppc64 (#1060691) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.22-1
changelog:
  - fedora- services are named rhel- (#1066118) (bcl@redhat.com)
  - Remove unneeded packages from runtime-install (#1065557) (bcl@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.23-1
changelog:
  - livemedia-creator: Set the product and release version env variables (bcl@redhat.com)
    Resolves: rhbz#1067746
  - Remove unneeded images from the product -logos (bcl@redhat.com)
    Resolves: rhbz#1068721


author: Brian C. Lane <bcl@redhat.com> 19.6.26-1
changelog:
  - Use string for releasever not int (bcl@redhat.com)
    Related: rhbz#1067746
  - Make lorax's installation of lockdown.efi conditional on its existence. (pjones@redhat.com)
    Resolves: rhbz#1071380


author: Brian C. Lane <bcl@redhat.com> 19.6.29-1
changelog:
  - utf-8 encode yum actions before displaying them (#1072362) (bcl@redhat.com)
  - Use BOOTAA64.efi for AARCH64 bootloader filename (#1080113) (bcl@redhat.com)
  - Drop devicetree from aarch64 grub2-efi.cfg (#1089418) (bcl@redhat.com)
  - livemedia-creator: Add ppc64 live creation support (#1102318)
    (bcl@redhat.com)
  - runtime-install: Add rpm-ostree (walters@verbum.org)


author: Brian C. Lane <bcl@redhat.com> 19.6.30-1
changelog:
  - livemedia-creator: Cleanup temp yum files (bcl@redhat.com)
    Resolves: rhbz#1073502
  - Require 32bit glibc on ppc64 (bcl@redhat.com)
    Resolves: rhbz#1105054
  - Add xfsdump and remove extra files from xfsprogs (bcl@redhat.com)
    Resolves: rhbz#1118654
  - Add ipmitool and drivers (bcl@redhat.com)
    Resolves: rhbz#1126009
  - Update grub2-efi.cfg for aarch64 to more closely match x86 (dmarlin@redhat.com)
    Resolves: rhbz#1089418


author: Brian C. Lane <bcl@redhat.com> 19.6.32-1
changelog:
  - Yaboot to grub2 conversion cleanup. (dwa@redhat.com)
    Related: rhbz#1131199
  - GRUB2 as the ISO boot loader for POWER arch (#1131199) (pfsmorigo@br.ibm.com)
    Resolves: rhbz#1131199
  - Revert "Require 32bit glibc on ppc64" (bcl@redhat.com)
    Related: rhbz#1131199


author: Brian C. Lane <bcl@redhat.com> 19.6.33-1
changelog:
  - livemedia-creator: Update ppc64 live to use grub2 (bcl@redhat.com)
    Related: rhbz#1102318
    Related: rhbz#1131199


author: Brian C. Lane <bcl@redhat.com> 19.6.34-1
changelog:
  - allow setting additional dracut parameters for DVD s390x installs (dan@danny.cz)
    Resolves: rhbz#1132050


author: Brian C. Lane <bcl@redhat.com> 19.6.36-1
changelog:
  - Add more tools for rescue mode (bcl@redhat.com)
    Resolves: rhbz#1109785
  - Add kexec anaconda addon (bcl@redhat.com)
    Resolves: rhbz#1116335


author: Brian C. Lane <bcl@redhat.com> 19.6.37-1
changelog:
  - Let the plymouth dracut module back into the ppc64 upgrade.img (dshea@redhat.com)
    Resolves: rhbz#1069671


author: Brian C. Lane <bcl@redhat.com> 19.6.38-1
changelog:
  - livemedia-creator: Make sure ROOT_PATH exists (bcl@redhat.com)
    Related: rhbz#1144140
  - livemedia-creator: Use RHEL7 version of kickstart (bcl@redhat.com)
    Related: rhbz#1144140
  - RHEL7 doesn't include pigz or pbzip2 (bcl@redhat.com)
    Related: rhbz#1144140
  - livemedia-creator: Add --no-recursion to mktar (bcl@redhat.com)
    Related: rhbz#1144140
  - livemedia-creator: Add support for making tarfiles (bcl@redhat.com)
    Resolves: rhbz#1144140
  - livemedia-creator: Check fsimage kickstart for single partition (bcl@redhat.com)
    Related: rhbz#1144140
  - livemedia-creator: Copy fsimage if hardlink fails (bcl@redhat.com)
    Related: rhbz#1144140
  - livemedia-creator: Make --make-fsimage work with virt-install (bcl@redhat.com)
    Related: rhbz#1144140


author: Brian C. Lane <bcl@redhat.com> 19.6.39-1
changelog:
  - Don't remove /usr/share/doc/anaconda. (clumens@redhat.com)
    Resolves: rhbz#1147518
  - Stop removing libXt from the installation media. (clumens@redhat.com)
    Related: rhbz#1147518
  - network: add support for bridge (#1075195) (rvykydal@redhat.com)
    Related: rhbz#1075195


author: Brian C. Lane <bcl@redhat.com> 19.6.40-1
changelog:
  - Use shim on aarch64. (pjones@redhat.com)
    Related: rhbz#1100048
  - Keep the /etc/lvm/profiles directory in the image (vpodzime@redhat.com)
    Related: rhbz#869456


author: Brian C. Lane <bcl@redhat.com> 19.6.41-1
changelog:
  - Make sure shim is actually in the package list on aarch64 as well.  (pjones@redhat.com)
    Related: rhbz#1100048


author: Brian C. Lane <bcl@redhat.com> 19.6.42-1
changelog:
  - Revert "Don't remove /usr/share/doc/anaconda." (mkolman@redhat.com)
    Related: rhbz#1072033
  - Look for "BOOT${efiarch}.EFI" in mkefiboot as well. (pjones@redhat.com)
    Related: rhbz#1100048
  - Libgailutil is required yelp, don't remove it (mkolman@redhat.com)
    Related: rhbz#1072033


author: Brian C. Lane <bcl@redhat.com> 19.6.48-1
changelog:
  - aarch64 no longer needs explicit console setting (#1170413) (bcl@redhat.com)
    Resolves: rhbz#1170413


author: Brian C. Lane <bcl@redhat.com> 19.6.53-1
changelog:
  - Keep the zram kernel module (bcl@redhat.com)
  - Keep seq and getconf utilities in the image (vpodzime@redhat.com)
  - Don't remove usr/lib/rpm/platform/ (#1116450) (bcl@redhat.com)
  - Include /sbin/ldconfig from glibc. (dlehman@redhat.com)


author: Brian C. Lane <bcl@redhat.com> 19.6.54-1
changelog:
  - Add removekmod template command (bcl@redhat.com)
    Resolves: rhbz#1230356
  - Disable systemd-tmpfiles-clean (bcl@redhat.com)
    Resolves: rhbz#1202545
  - Add bridge-utils (bcl@redhat.com)
    Resolves: rhbz#1188812


author: Brian C. Lane <bcl@redhat.com> 19.6.55-1
changelog:
  - Add ntp configuration file to installation (jkonecny@redhat.com)
    Related: rhbz#1085013
  - livemedia-creator: Add option to create qcow2 disk images (bcl@redhat.com)
    Resolves: rhbz#1210413
  - Add support for creating qcow2 images (bcl@redhat.com)
    Related: rhbz#1210413
  - Install the oscap-anaconda-addon (vpodzime@redhat.com)
    Resolves: rhbz#1190685


author: Brian C. Lane <bcl@redhat.com> 19.6.56-1
changelog:
  - Add ability for external templates to graft content into boot.iso (walters@verbum.org)
    Resolves: rhbz#1202278
  - Update templates to use installimg for product and updates (bcl@redhat.com)
    Related: rhbz#1202278


author: Brian C. Lane <bcl@redhat.com> 19.6.57-1
changelog:
  - livemedia-creator: fix base repo log monitor (#1196721) (bcl@redhat.com)
    Related: rhbz#1196721
  - network: turn slaves autoconnection on (rvykydal@redhat.com)
    Resolves: rhbz#1172751
    Resolves: rhbz#1134090


author: Brian C. Lane <bcl@redhat.com> 19.6.64-1
changelog:
  - Fix metacity theme path (bcl)
    Related: rhbz#1231856
  - Run spice-vdagentd without systemd-logind integration (dshea)
    Related: rhbz#1169991


author: Brian C. Lane <bcl@redhat.com> 19.6.67-1
changelog:
  - templates: Reinstate gpgme-pthread.so for ostree (walters)
  - Resolves: rhbz#1311793
  - Add rng-tools and start rngd.service by default (bcl)
  - Resolves: rhbz#1258516
  - Add (bcl)
  - Resolves: rhbz#1269891
  - Include grub2-efi-modules on the boot.iso (bcl)
  - Resolves: rhbz#1277227
  - Keep modules needed for ast video driver support (bcl)
  - Resolves: rhbz#1272658
  - configure NetworkManager to loglevel=DEBUG (rvykydal)
  - Resolves: rhbz#1274647
  - Update docs for product.img (bcl)
  - Resolves: rhbz#1272361
  - paste is needed by os-prober (bcl)
  - Resolves: rhbz#1275105
  - Keep libthread so that gdb will work correctly (bcl)
  - Resolves: rhbz#1269055
  - Add --installpkgs argument (walters)
  - Resolves: rhbz#1272222
  - livemedia-creator: Clean up resultdir handling (bcl)
  - Resolves: rhbz#1290552
  - https is a sane package source URL scheme (walters)
  - Resolves: rhbz#1292680
  - Add product.img support for s390 templates (dan)
  - Resolves: rhbz#1272359


author: Brian C. Lane <bcl@redhat.com> 19.6.68-1
changelog:
  - livemedia-creator: Use correct suffix on default image names (bcl)
    Resolves: rhbz#1318958
  - Fix livemedia-creator manpage (bcl)
    Resolves: rhbz#1318952


author: Brian C. Lane <bcl@redhat.com> 19.6.69-1
changelog:
  - Remove Metacity override and theme (bcl)
    Resolves: rhbz#1324890
  - Copying same file shouldn't crash (bcl)
    Resolves: rhbz#1269213


author: Brian C. Lane <bcl@redhat.com> 19.6.72-1
changelog:
  - Make sure cmdline config file exists (bcl)
    Resolves: rhbz#1348302
  - Keep all of the kernel drivers/target/ modules (bcl)
    Resolves: rhbz#1348381
  - Keep the pci utilities for use in kickstarts (bcl)
    Resolves: rhbz#1344926


author: Brian C. Lane <bcl@redhat.com> 19.6.77-1
changelog:
  - livemedia-creator: Install genericdvd.prm (bcl)
    Related: rhbz#1269213
  - livemedia-creator: Use imgutils.copytree for results (bcl)
    Resolves: rhbz#1362157


author: Brian C. Lane <bcl@redhat.com> 19.6.78-1
changelog:
  - Don't log dracut initrd regeneration messages into /tmp/syslog (rvykydal)
    Related: rhbz#1369439
  - Use imjournal for rsyslogd instead of sharing /dev/log with journal (rvykydal)
    Resolves: rhbz#1369439


author: Brian C. Lane <bcl@redhat.com> 19.6.81-1
changelog:
  - Keep fsfreeze in install environment (rmarshall)
    Related: rhbz#1315468
  - Fix duplicate kernel messages in /tmp/syslog (rvykydal)
    Resolves: rhbz#1382611


author: Petr Oros <poros@redhat.com> - B.02.18-1
changelog:
  - Rebase to lshw-B.02.18
  - Sync with upstream git
  - Apply patches from beaker-fork
  - Resolves: #1368704


author: Dan Horák <dan[at]danny.cz> - 0.23-2
changelog:
  - fix path separator for FC devices (#589327)
  - fix for kernels with unified string representation of NULL (#589860)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move web files to reside under %{contentdir}
  - move files from /usr/share to %{_datadir}
  - integrate spot-fixes from mailman lists via gnome.org


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to beta4
  - change uid/gid to apache.apache to match apache (#13593)
  - properly recompile byte-compiled versions of the scripts (#13619)
  - change mailman alias from root to postmaster


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make the default owner root again so that root owns the docs
  - update to 2.0beta5, which fixes a possible security vulnerability
  - add smrsh symlink


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.0.5
  - change the default hostname from localhost to localhost.localdomain in the
    default configuration
  - chuck configuration file settings other than those dependent on the host name
    (the build system's host name is not a good default)  (#32337)


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.8-1
changelog:
  - set FQDN and URL at build-time so that they won't be set to the host the
    RPM package is built on (#59177)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix a default permissions problem in %{_var}/mailman/archives/private,
    reported by Johannes Erdfelt
  - update to 2.0.9


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.9-1
changelog:
  - include README.QMAIL in with the docs (#58887)
  - include README.SENDMAIL and README.EXIM in with the docs
  - use an included httpd.conf file instead of listing the configuration
    directives in the %description, which due to specspo magic might look
    wrong sometimes (part of #51324)
  - interpolate the DEFAULT_HOST_NAME value in mm.cfg into both the DEFAULT_URL
    and MAILMAN_OWNER (#57987)
  - move logs to /var/log/mailman, qfiles to /var/spool/mailman, rotate
    logs in the log directory (#48724)
  - raise exceptions when someone tries to set the admin address for a list
    to that of the admin alias (#61468)


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - Bring package up to date with current upstream source, 2.1
  - Fix several install/packaging problems that were in upstream source
  - Add multiple mail group functionality
  - Fix syntax error in fblast.py
  - Remove the forced setting of mail host and url host in mm_cfg.py


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - 1) remove config patch, mailmanctl was not the right file to install in init.d,
  - it needed to be scripts/mailman
  - 2) rename httpd-mailman.conf to mailman.conf, since the file now lives
  - in httpd/conf.d directory the http prefix is redundant and inconsistent
  - with the other file names in that directory.


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - various small tweaks to the spec file to make installation cleaner
  - use %{__python} when compiling, redirect compile output to /dev/null,
  - don't run update in %post, let the user do it, remove the .pyc files in %postun,
  - add setting of MAILHOST and URLHOST to localhost.localdomain, don't let
  - configure set them to the build machine.


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - fix bug 72004, 74483, 74484, 87856 - improper log rotation
  - fix bug 88083 - mailman user/group needed to exist during build
  - fix bug 88144 - wrong %file attributes on mm_cfg.py
  - fix bug 89221 - mailman user not created on install
  - fix bug 89250 - wrong pid file name in initscript


author: Warren Togami <wtogami@redhat.com> 3:2.1.4-4
changelog:
  - #105638 fix bytecompile and rpm -V
  - postun /etc/postfix/aliases fix
  - clean uninstall (no more empty dirs)
  - #115378 RedirectMatch syntax fix


author: John Dennis <jdennis@redhat.com> 3:2.1.5-1
changelog:
  - bring up to latest 2.1.5 upstream release
    From Barry Warsaw: Mailman 2.1.5, a bug fix release that also
    contains new support for the Turkish language, and a few minor new
    features. Mailman 2.1.5 is a significant upgrade which should
    improve disk i/o performance, administrative overhead for discarding
    held spams, and the behavior of bouncing member disables.  This
    version also contains a fix for an exploit that could allow 3rd
    parties to retrieve member passwords.  It is thus highly recommended
    that all existing sitesupgrade to the latest version


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-5
changelog:
  - add status reporting to init.d control script
    stop mailman during an installation
    restart mailman if it had been running prior to installation


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-6
changelog:
  - fix bug in pre scriplet, last command had been "service mailman stop"
    which should have been harmless if mailman was not installed except
    that it left the exit status from the script as non-zero and rpm
    aborted the install.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-9
changelog:
  - apply patch to elminate "-1 LISTNAME moderator request(s) waiting" messages
    problem desciption here:
    http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.038.htp


author: John Dennis <jdennis@redhat.com> 3:2.1.5-10
changelog:
  - fix bug #129492 and bug #120912
    stop using crontab to setup mailman's cron jobs,
    instead install cron script in /etc/cron.d


author: John Dennis <jdennis@redhat.com> 3:2.1.5-14
changelog:
  - add comments into the crontab files so users know the /etc/cron.d
    file is volitile and will edit the right file.
    Also make the master crontab file "config noreplace" so edits are preserved.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-15
changelog:
  - fix bug #117615, don't overwrite user modified templates on install
    made template directory "config noreplace"


author: John Dennis <jdennis@redhat.com> 3:2.1.5-20
changelog:
  - fix bug #132732, security policy violations,
  - bump release verison
    move non-data installation files from /var/mailman to /usr/lib/mailman,
    update documentation


author: John Dennis <jdennis@redhat.com> 3:2.1.5-21
changelog:
  - move list data dir to /var/lib/mailman to conform to FHS
    move lock dir to /var/lock/mailman to conform to FHS
    move config dir (VAR_PREFIX/data) to /etc/mailman to conform to FHS
    Thanks to Matt Domsch for pointing this out.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-26
changelog:
  - fix typo in install documentation
  - fix error in templates/Makefile.in, bad install args, fixes bug #136001,
    thank you to Kaj J. Niemi for spotting this.


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-31.fc4
changelog:
  - fix bug #132750, add daemon to mail-gid so courier mail server will work.
  - fix bug #143008, wrong location of mailmanctl in logrotate
  - fix bug #142605, init script doesn't use /var/lock/subsys


author: John Dennis <jdennis@redhat.com> - 3:2.1.6-1.fc4
changelog:
  - initial port of 2.1.6
    remove mailman-2.1.5-moderator-request.patch, present in new release
    remove mailman-2.1-CAN-2005-0202.patch,       present in new release
    remove mailman-2.1-CAN-2004-1177.patch,       present in new release


author: Tomas Smetana <tsmetana@redhat.com> - 3:2.1.9-7
changelog:
  - fix #242678 wrong init script
  - fix #247160 INSTALL.REDHAT references non-existent README.POSTFIX file,
    patch by Todd Zullinger
  - fix #132495 jp character encoding is not UTF8, patch by Todd Zullinger
  - update license, add dist to release


author: Tomas Smetana <tsmetana@redhat.com> - 3:2.1.9-8
changelog:
  - fix #333011 - withlist crashes with NameError
  - fix #350461 - init script prevents proper SELinux domain transitions
  - fix #303061 - broken multipart mail headers


author: Tomas Smetana <tsmetana@redhat.com> - 3:2.1.11-3
changelog:
  - fix #457388 - don't call "/usr/bin/python" from /etc/cron.d/mailman
  - fix #457389 - cron complains about bad username


author: Daniel Novotny <dnovotny@redhat.com> 3:2.1.12-5
changelog:
  - hardcoded library path removed
  - mixed use of spaces and tabs fixed
  - added --libdir to configure
  - fixed URL to tarball
  - permissions of source files changed to 0644
  - got rid of "file listed twice" warnings: listing the files explicitly
  - all this were cleanups for merge review (#226117)


author: Daniel Novotny <dnovotny@redhat.com> 3:2.1.12-7
changelog:
  - fix bz#512798 -  Mailman path in /usr/bin/mailman-update-cfg 
    is incorrect on x86_64.
  - added explanation comment in mailman-update-cfg, to justify
    why this script is needed


author: Daniel Novotny <dnovotny@redhat.com> 3:2.1.12-9
changelog:
  - regenerated patches so patch fuzz 3 is not needed (bz#513207)
  - mm_cfg.pyc and .pyo are now %verify(not md5 size mtime) (bz#512794)


author: Jan Kaluza <jkaluza@redhat.com> 3:2.1.13-6
changelog:
  - fix #631881 - CVE-2010-3089: Multiple security flaws leading
    to cross-site scripting (XSS) attacks


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-5
changelog:
  - fix #679644 - fixed CVE-2011-0707: three XSS flaws due improper
    escaping of the full name of the member


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-6
changelog:
  - fix #688435 - set proper permissions for private archive
  - fix badly rebased LC_CTYPE patch which caused newlist to fail with traceback


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.14-13
changelog:
  - fix #751581 - changed systemd service file to create error log with proper
    permissions, changed logrotate conf to swifth to proper username/group


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-8
changelog:
  - fix #838580 - check if directories are 0755, there is no need to need
    02775 on all Mailman directories


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-10
changelog:
  - fix #921421 - fix /var/spool/mailman/ permissions
  - fix #921423 - move mm_cfg.py to /etc/mailman
  - move templates from /usr/lib/mailman to /etc/mailman


author: Jan Kaluza <jkaluza@redhat.com> - 3:2.1.15-18
changelog:
  - fix #1107652 - add support for DMARC
  - fix #1180981 - install tmpfiles.d into /usr/lib instead of /etc
  - fix #1188043 - set 2775 permission for /etc/mailman


author: Pavel Šimerda <psimerda@redhat.com> - 3:2.1.15-23
changelog:
  - Resolves: #1232749 - fix bad subject of the welcome email when creating list
    using newlist command


author: Dmitry Butskoy <Dmitry@Butskoy.name> - 11.25-3
changelog:
  - more spec file cleanups
  - accepted for Fedora Extra
    (review by Aurelien Bompard <gauret@free.fr>)


author: Dmitry Butskoy <Dmitry@Butskoy.name> - 12.0-1
changelog:
  - upgrade to 12.0
  - change new upstream name "mailx" to the old name "nail" to avoid
    conflicts with the Core mailx package.
  - drop Source1, use package's html file instead.


author: Dmitry Butskoy <Dmitry@Butskoy.name> - 12.0-2
changelog:
  - complete "mailx to nail" changes in the manual and config files
  - drop _smp_mflags: it caused make to work incorrectly.


author: Dmitry Butskoy <Dmitry@Butskoy.name> - 12.3-0
changelog:
  - Change the name from "nail" to upstream's "mailx".
    Merge with the ordinary "mailx" cvs tree for Fedora 10.
    Now this stuff supersedes the old ancient mailx-8.x in Fedora.
  - Build with nss instead of openssl, for "Security Consolidation" process.


author: Dmitry Butskoy <Dmitry@Butskoy.name>
changelog:
  - add missed BR for krb5-devel
  - activate IPv6 support
  - change config to /etc/mail.rc for compatibility
  - add triggerpostun scriptlets against previous mailx and nail
    to check and merge (when possible) their user config changes
  - use proper config filename in manuals
  - use "less" instead of non-provided "pg" for nobsdcompat mode


author: Dmitry Butskoy <Dmitry@Butskoy.name> - 12.3-1
changelog:
  - Place mailx to /bin/mailx, to avoid extra symlink in redhat-lsb package
  - /bin/mailx is now a base binary, another symlinked to it.


author: Peter Schiffer <pschiffe@redhat.com> - 12.5-7
changelog:
  - cleaned .spec file
  - resolves: #805410
    fixed SIGSEGV crash in which_protocol() function
  - updated get-upstream-tarball.sh script and added it as additional source


author: Peter Schiffer <pschiffe@redhat.com> - 12.5-9
changelog:
  - related: #912785
    used -D_FILE_OFFSET_BITS=64 flag at the compile time
  - return error code when TMPDIR is set to an invalid path while sending email
  - added missing -v option to the usage message


author: Nikola Forró <nforro@redhat.com> - 12.5-13
changelog:
  - fix SIGSEGV crash in smtp_auth_var()
  - add warning message for empty from variable
    resolves: #1113611


author: jchaloup <jchaloup@redhat.com> - 7.1.0-1
changelog:
  - resolves: #1095371
    deprecated syscalls for aarch64 (remove man page and its syscalls for non-aarch64 archs)
    latest tarball uploaded
  - resolves: #1073718
    clarification of open.2 man page about aligned buffer size
  - resolves: #1086994
    adding missing proc fields description
  - resolves: #1040023
    ssl_request_cert formating typo in vsftpd.conf man page
  - resolves: #1021967
    socat formating typo in man page
  - resolves: #1131853
    proc/fs is not an empty directory
  - resolves: #1146259
    information about xinitd reload
  - resolves: #1104994
    missing isolate options in vsftpd.conf man page
  - resolves: #1129235
    flock.2 more info about locks over NFS
  - resolves: #948457
    mt.1 missing option section
  - resolves: #948599
    edac-ctl.1 missing options
  - resolves: #1109291
    mailx.1 additional information about FROM syntax
  - resolves: #1109294
    mailx.1 additional information about environment variables
  - resolves: #1131939
    charset.7, nl_langinfo.3 information about implicit codeset
  - resolves: #1131859
    host.conf.5. multi on by default
  - resolves: #1066917
    zsh.1, zshall.1 missing option for emulation
  - resolves: #964302
    ignore_afs missing options in pam_krb5.8
  - resolves: #1140589
    wget.1 duplicated options deleted
  - resolves: #1069350
    wrong symlink in run-parts.4, cp crontabs.4 run-parts.4 (in tarball)
  - resolves: #948442
    new man page for ecj.1 (in tarball)


author: jchaloup <jchaloup@redhat.com> - 7.1.1-1
changelog:
  - deprecated syscalls for aarch64
    related: #1095371
  - latest tarball uploaded
  - delete system-config-bind text from named.8
    resolves: #1148758
  - madvise.2 MADV_REMOVE supports more filesystems
    resolves: #1120294
  - resolv.conf.5 add missing no-tld-query
    resolves: #1147718
  - mc.1 fixing typos
    resolves: #948487
  - missing fanotify manual pages added (in tarball)
    resolves: #1155260
  - missing localized man-pages in procps-ng 3.3.10 added (in tarball)
    resolves: #1150170


author: jchaloup <jchaloup@redhat.com> - 7.1.2-1
changelog:
  - netstat.8 -S/--sctp options added
    resolves: #1064756
  - latest tarball uploaded
  - update ecj.1 man page to the latest upstream version
    related: #948442


author: jchaloup <jchaloup@redhat.com> - 7.1.3-1
changelog:
  - resolver.5 is a redirection to resolv.conf
    upload the latest tarball
    related: #1147718
  - procng-ng contains pl/pkill.1 man page which reffers non-existing one, removing the pl mutation
    related: #1150170


author: jchaloup <jchaloup@redhat.com> - 7.2.0-1
changelog:
  - Upload new tarball
    resolves: #1225032
  - removed bug fixed in original component: #1152066 (bind)
  - removed bug fixed in original component: #1147545 (zsh)
  - backport MT info from man-pages 3.81
    resolves: #1197850
  - fix typoes in mgetty's man pages
    resolves: #1141874
  - fix wrong usage of accept/connect options in stunnel.8
    resolves: #1155977
  - autoconf: add missing config.guess.1 and config.sub.1 (no patch)
    resolves: #1162225
  - rtld-audit.7 fix the correct format for cookies
    resolves: #1222720
  - Don't generate debuginfo subpackage
    resolves: #1179262


author: jchaloup <jchaloup@redhat.com> - 7.2.1-1
changelog:
  - Upload new tarball
    related: #1225032
  - removed bug fixed in original component: #1147556 (mt-st)
  - fix dump utmp name in dump-utmp.8
    resolves: #1164846


author: jchaloup <jchaloup@redhat.com> - 7.2.4-1
changelog:
  - New patch for fpurge with MT introduced since the first evaluation
  - Remove mkfifoat.3 man page
  - Upload new tarball
    related: #1197850


author: Nikola Forró <nforro@redhat.com> - 7.3.0-1
changelog:
  - Upload new tarball
    resolves: #1343004
  - remove bug fixed in original component: #1147538 (xinetd)
  - remove bug fixed in original component: #1147550 (vsftpd)
  - remove bug fixed in original component: #1147551 (vsftpd)
  - remove bug fixed in original component: #1147552 (pam_krb5)
  - remove bug fixed in original component: #1147572 (wget)
  - remove bug fixed in original component: #1155006 (mc)
  - remove bug fixed in original component: #1218284 (stunnel)
  - remove bug fixed in original component: #1147564 (edac-utils)
  - __fpurge.3: add missing man page
    resolves: #1267657
  - cciss.4: replace man page content with notice about driver removal
    resolves: #1112307
  - libpaf-dsc.3, libpaf-ebb.3: fix formatting and examples
    resolves: #1181670
  - captest.8: describe --init-grp option
    resolves: #1255283
  - png.5: fix invalid RFC URL
    resolves: #1263575
  - socket.7: document SO_REUSEPORT option
    resolves: #1269549
  - userhelper.8: fix up exit status description and consistency
    resolves: #1274949
  - recv.2: change description of flags argument to apply also to recvfrom and recvmsg
    resolves: #1278492
  - nsswitch.conf.5: add list of files being read when "files" service is used
    resolves: #1289915
  - prctl.2: add description of Intel MPX calls
    resolves: #1297898
  - iconv.1, locale.1, localedef.1, repertoiremap.5, iconvconfig.8: add new man pages
  - charmap.5, locale.5, charsets.7, locale.7: sync with upstream
    resolves: #1301661
  - tcp.7: document TCP_USER_TIMEOUT
    resolves: #1312875
  - recv.2, cmsg.3: fix type of cmsg_len member of cmsghdr structure
    resolves: #1315605
  - clone.2, fork.2: document ERESTARTNOINTR error code
    resolves: #1330661
  - open.2: document O_TMPFILE option
    resolves: #1330740
  - setfacl.1: document the meaning of '-' in perms
    resolves: #1337039
  - cp.1, install.1, mkdir.1, mkfifo.1, mknod.1: update security context options
    to reflect coreutils change
    resolves: #1263629
  - cp.1, install.1, mkdir.1, mkfifo.1, mknod.1: update security context options
    to reflect coreutils change
    resolves: #1263632
  - cp.1, install.1, mkdir.1, mkfifo.1, mknod.1: update security context options
    to reflect coreutils change
    resolves: #1263635
  - cp.1, install.1, mkdir.1, mkfifo.1, mknod.1: update security context options
    to reflect coreutils change
    resolves: #1263637


author: Nikola Forró <nforro@redhat.com> - 7.3.1-1
changelog:
  - Upload new tarball
    related: #1343004
  - remove bug fixed in original component: #1240948 (psacct)
  - recv.2: add deprecation note about recv() syscall on aarch64
    resolves: #1361588
  - libpng.3: fix invalid RFC URL
    related: #1263575
  - recv.2: change description of flags argument also on aarch64
    related: #1278492
  - localedef.1: add missing --old-style option
    related: #1301661
  - recv.2: fix type of cmsg_len member of cmsghdr structure also on aarch64
    related: #1315605
  - clone.2: document ERESTARTNOINTR error code also on aarch64
    related: #1330661
  - open.2: document O_TMPFILE option also on aarch64
    related: #1330740


author: Nikola Forró <nforro@redhat.com> - 7.3.2-1
changelog:
  - Upload new tarball
    related: #1343004
  - prctl.2, capabilities.7: document ambient capabilities
    resolves: #1360898


author: Nikola Forró <nforro@redhat.com> - 7.4.0-1
changelog:
  - Upload new tarball
    resolves: #1435590
  - remove bug fixed in original component: #1147568 (mailx)
  - remove bug fixed in original component: #1147570 (mailx)
  - remove bug fixed in original component: #1147565 (ecj)
  - remove bug fixed in original component: #1349833 (paflib)
  - ipvsadm.8: add missing option
    resolves: #1085531
  - cp.1, install.1, mkdir.1, mkfifo.1, mknod.1: update security context options
    to reflect coreutils change
    resolves: #1263636
  - mcstransd.8: fix typos
    resolves: #1316009
  - memparse.1: remove incorrect description
    resolves: #1411979
  - nsswitch.conf.5: add information about sss service
    resolves: #1390935
  - packet.7: add missing socket options
    resolves: #1404478
  - namespaces.7, pid_namespaces.7, user_namespaces.7: add new manpages
    resolves: #1377583


author: Nikola Forró <nforro@redhat.com> - 7.4.1-1
changelog:
  - Upload new tarball
    related: #1435590
  - remove bug fixed in original component: #1167833 (net-tools)


author: Nikola Forró <nforro@redhat.com> - 7.4.2-1
changelog:
  - Upload new tarball
    related: #1435590
  - stat.2: update to cover latest things used in RHEL7
    resolves: #1452424
  - clone.2: document features related to namespaces
    resolves: #1452368


author: Honza Horak <hhorak@redhat.com> 5.5.28a-5
changelog:
  - Added licenses LGPLv2 and BSD
  - Removed wrong usage of %{epoch}
  - Test-suite is run in %check
  - Removed perl dependency checking adjustment, rpm seems to be smart enough
  - Other minor spec file fixes


author: Honza Horak <hhorak@redhat.com> 5.5.28a-6
changelog:
  - Removed %{_isa} from provides/obsoletes, which doesn't allow
    proper obsoleting
  - Do not obsolete mysql at the time of testing


author: Honza Horak <hhorak@redhat.com> 5.5.28a-7
changelog:
  - Adding necessary hacks for perl dependency checking, rpm is still
    not wise enough
  - Namespace sanity re-added for symbol default_charset_info


author: Honza Horak <hhorak@redhat.com> 5.5.29-1
changelog:
  - Rebase to 5.5.29
    https://kb.askmonty.org/en/mariadb-5529-changelog/
  - Fix inaccurate default for socket location in mysqld-wait-ready
    Resolves: #890535


author: Honza Horak <hhorak@redhat.com> 5.5.29-3
changelog:
  - Packages need to provide also %_isa version of mysql package
  - Provide own symbols with real- prefix to distinguish from mysql
    unambiguously
  - Fix format for buffer size in error messages (MDEV-4156)
  - Disable some tests that fail on ppc and s390
  - Conflict only with real-mysql, otherwise mariadb conflicts with ourself


author: Honza Horak <hhorak@redhat.com> 5.5.29-7
changelog:
  - Use configured prefix value instead of guessing basedir
    in mysql_config
  Resolves: #916189
  - Export dynamic columns and non-blocking API functions documented
    by upstream


author: Honza Horak <hhorak@redhat.com> 5.5.29-9
changelog:
  - Let mariadb-embedded-devel conflict with MySQL-embedded-devel
  - Adjust mariadb-sortbuffer.patch to correspond with upstream patch


author: Honza Horak <hhorak@redhat.com> 1:5.5.29-10
changelog:
  - Adding epoch to have higher priority than other mysql implementations
    when comes to provider comparison


author: Honza Horak <hhorak@redhat.com> 5.5.30-2
changelog:
  - Remove mytop utility, which is packaged separately
  - Resolve multilib conflicts in mysql/private/config.h


author: Honza Horak <hhorak@redhat.com> 5.5.31-1
changelog:
  - Rebase to 5.5.31
    https://kb.askmonty.org/en/mariadb-5531-changelog/
  - Preserve time-stamps in case of installed files
  - Use /var/tmp instead of /tmp, since the later is using tmpfs,
    which can cause problems
    Resolves: #962087
  - Fix test suite requirements


author: Honza Horak <hhorak@redhat.com> 5.5.31-6
changelog:
  - Test suite params enhanced to decrease server condition influence
  - Fix misleading error message when uninstalling built-in plugins
    Related: #966873


author: Honza Horak <hhorak@redhat.com> 5.5.32-1
changelog:
  - Rebase to 5.5.32
    https://kb.askmonty.org/en/mariadb-5532-changelog/
  - Clean-up un-necessary systemd snippets


author: Dennis Gilmore <dennis@ausil.us> - 5.5.32-5
changelog:
  - remove "Requires(pretrans): systemd" since its not possible
  - when installing mariadb and systemd at the same time. as in a new install


author: Honza Horak <hhorak@redhat.com> 5.5.32-6
changelog:
  - Remove unneeded systemd-sysv requires
  - Provide mysql-compat-server symbol
  - Create mariadb.service symlink
  - Fix multilib header location for arm
  - Enhance documentation in the unit file
  - Use scriptstub instead of links to avoid multilib conflicts
  - Revert docs in unversioned dir
  - Remove mysql provides from server-side and obsoleting mysql
  - Revert explicit enabling mysqld in the beggining of the transaction


author: Honza Horak <hhorak@redhat.com> - 1:5.5.32-9
changelog:
  - Move log file into /var/log/mariadb/mariadb.log
  - Rename logrotate script to mariadb
  - Resolves: #999589


author: Honza Horak <hhorak@redhat.com> 1:5.5.34-1
changelog:
  - Rebase to 5.5.34
  - Obsolete mysql packages
    Resolves: #1043971
  - Don't test EDH-RSA-DES-CBC-SHA cipher, it seems to be removed from openssl
    which now makes mariadb/mysql FTBFS because openssl_1 test fails
    Resolves: #1048881
  - Check if socket file is not being used by another process at a time
    of starting the service
    Resolves: #1045435


author: Honza Horak <hhorak@redhat.com> 1:5.5.34-3
changelog:
  - Clean all non-needed doc files properly
    Related: #1044532
  - Disable main.gis-precise test also for AArch64
    Disable perfschema.func_file_io and perfschema.func_mutex for AArch64
    (like it is done for 32-bit ARM)
    Resolves: #1050988
  - Build with -O3 on ppc64 (disabling innodb_prefix_index_restart_server)
    Related: #1051069
  - Move mysql_config to -devel sub-package and remove Require: mariadb
    Resolves: #1050920


author: Honza Horak <hhorak@redhat.com> 5.5.35-1
changelog:
  - Rebase to 5.5.35
    https://kb.askmonty.org/en/mariadb-5535-changelog/
    Also fixes: CVE-2014-0001, CVE-2014-0412, CVE-2014-0437, CVE-2013-5908,
    CVE-2014-0420, CVE-2014-0393, CVE-2013-5891, CVE-2014-0386, CVE-2014-0401,
    CVE-2014-0402
    Resolves: #1054041


author: Honza Horak <hhorak@redhat.com> - 1:5.5.37-1
changelog:
  - Rebase to 5.5.37
    https://kb.askmonty.org/en/mariadb-5537-changelog/
    Also fixes: CVE-2014-2440 CVE-2014-0384 CVE-2014-2432 CVE-2014-2431
    CVE-2014-2430 CVE-2014-2436 CVE-2014-2438 CVE-2014-2419
    Resolves: #1101062


author: Honza Horak <hhorak@redhat.com> - 1:5.5.37-2
changelog:
  - Build with -O3 on all power64 arches
    Disable some failing tests temporarily on ppc64le
    Resolves: #1123497


author: Matej Muzila <mmuzila@redhat.com> - 1:5.5.40-1
changelog:
  - Rebase to 5.5.40
    Also fixes: CVE-2014-4274 CVE-2014-4287 CVE-2014-6463 CVE-2014-6464
    CVE-2014-6469 CVE-2014-6484 CVE-2014-6505 CVE-2014-6507 CVE-2014-6520
    CVE-2014-6530 CVE-2014-6551 CVE-2014-6555 CVE-2014-6559 CVE-2014-6564
    Resolves: #1160549


author: Matej Muzila <mmuzila@redhat.com> - 1:5.5.41-1
changelog:
  - Rebase to 5.5.41
    Also fixes: CVE-2014-6568 CVE-2015-0374 CVE-2015-0381 CVE-2015-0382
    CVE-2015-0391 CVE-2015-0411 CVE-2015-0432
    Resolves: #1186110


author: Jakub Dorňák <jdornak@redhat.com> - 1:5.5.44-3
changelog:
  - MDEV-8827 Duplicate key with auto increment
    fix innodb auto-increment handling three bugs:
      1. innobase_next_autoinc treated the case of current<offset incorrectly
      2. ha_innobase::get_auto_increment didn't recalculate current when increment changed
      3. ha_innobase::get_auto_increment didn't pass offset down to innobase_next_autoinc
    Resolves: #1300621


author: Jakub Dorňák <jdornak@redhat.com> - 1:5.5.47-1
changelog:
  - Rebase to 5.5.47
    Also fixes: CVE-2015-4792 CVE-2015-4802 CVE-2015-4815 CVE-2015-4816
    CVE-2015-4819 CVE-2015-4826 CVE-2015-4830 CVE-2015-4836 CVE-2015-4858
    CVE-2015-4861 CVE-2015-4870 CVE-2015-4879 CVE-2015-4913 CVE-2015-7744
    CVE-2016-0505 CVE-2016-0546 CVE-2016-0596 CVE-2016-0597 CVE-2016-0598
    CVE-2016-0600 CVE-2016-0606 CVE-2016-0608 CVE-2016-0609 CVE-2016-0616
    CVE-2016-2047
    Resolves: #1300621


author: Michal Schorm <mschorm@redhat.com> - 5.5.52-2
changelog:
  - Extension of mariadb-prepare-db-dir script
  - Resolves: #1356897

  - Rebase to 5.5.52, that also include fix for CVE-2016-6662
    Resolves: #1377974


author: Honza Horak <hhorak@redhat.com> - 1:5.5.56-1
changelog:
  - Rebase to 5.5.56
    That release also fixes the following security issues:
    CVE-2016-5617/CVE-2016-6664 CVE-2017-3312 CVE-2017-3238 CVE-2017-3243
    CVE-2017-3244 CVE-2017-3258 CVE-2017-3313 CVE-2017-3317 CVE-2017-3318
    CVE-2017-3291 CVE-2017-3302 CVE-2016-5483/CVE-2017-3600 CVE-2017-3308
    CVE-2017-3309 CVE-2017-3453 CVE-2017-3456 CVE-2017-3464
    Resolves: #1458933
    New deps required by upstream: checkpolicy and policycoreutils-python
    License text removed by upstream: COPYING.LESSER
    Do not ignore test-suite failure
    Downstream script mariadb-prepare-db-dir fixed for CVE-2017-3265
    Resolves: #1458940


author: Honza Horak <hhorak@redhat.com> - 1:5.5.56-2
changelog:
  - Do not fix context and change owner if run by root in mariadb-prepare-db-dir
    Related: #1458940
  - Check properly that datadir includes only expected files
    Related: #1356897


author: Daiki Ueno <dueno@redhat.com> - 0.2.1-2
changelog:
  - remove unnesseary BR
  - don't embed rpath in executables
  - add docs
  - drop buildroot cleanup
  - preserve timestamp when make install


author: Daiki Ueno <dueno@redhat.com> - 0.2.2-1
changelog:
  - new upstream release
  - for Fedora 19 or later, use 'ruby(release)' instead of 'ruby(abi)',
    and also update the required Ruby ABI/release version to 2.0.0


author: Daiki Ueno <dueno@redhat.com> - 0.2.4-1.1
changelog:
  - use 'ruby(release)' on RHEL 7 as well as Fedora 19 (Closes: #1002870)
  - disable workaround for ruby bindings needed for earlier Fedora 19


author: Jon Masters <jcm@redhat.com> 2:1.0-0.1.pre3
changelog:
  - Bump epoch and use standard Fedora Packaging Guidelines for NVR.
  - Switch to using signed bz2 source and remove dead patch.


author: Prarit Bhargava <prarit@redhat.com> 2:1.0-0.3.6e4e2a00
changelog:
  - Updated sources to deal with various warning issues [701083] [704302]
  - Update URL for new location of Andi's mcelog tree
  - Update n-v-r to include latest git hash


author: Prarit Bhargava <prarit@redhat.com> - 2:1.0-0.13.f30da3d
changelog:
  - Update to upstream commit f30da3d, minor fixes, no features [1085134]
  - Add /var/log/mcelog file [1098864]
  - remove .src.rpm file [1038755]


author: Prarit Bhargava <prarit@redhat.com> - 3:120-1.e7e0ac1
changelog:
  - Add Broadwell-U, Broadwell-DE, and Knights Landing/Xeon Phi Support
  - additional general fixes
  - add mcelog.conf and mcelog.triggers man pages
  - update NVR to 120 to match upstream


author: Prarit Bhargava <prarit@redhat.com> - 3:136-1.e4aca63
changelog:
  - update NVR to 136 to match upstream [1336431]
  - additional general fixes [1336431]
  - Skylake Client support (6,94) (6,78) [1255571]
  - Broadwell SoC/DE, EP & EX support (6,79) [1255572]


author: Prarit Bhargava <prarit@redhat.com> - 3:144.1.94d853b2ea81
changelog:
  - update NVR to 144 to match upstream
  - add Denverton SoC support [1273768]
  - add Kabylake U/Y support, 0x8E [1310954]
  - add Kabylake H/S support, 0x9E [1310955]
  - add Knights Mill support [1381316]
  - mcelog didn't remove /var/run/mcelog-client when exitting [1362123]


author: <gleblanc@localhost.localdomain>
changelog:
  - beautification
  - made mdadm.conf non-replaceable config
  - renamed Copyright to License in the header
  - added missing license file
  - used macros for file paths


author: Doug Ledford <dledford@redhat.com> 1.5.0-2
changelog:
  - Add a default MAILADDR line to the mdadm.conf file installed by default
    (Bugzilla #92447)
  - Make it build with gcc-3.4


author: Doug Ledford <dledford@redhat.com> 1.5.0-4
changelog:
  - Update mdmonitor script to start daemon more cleanly
  - Repackage mdmpd tarball to include gcc-3.4 changes and to make
    mdmpd properly daemonize at startup instead of forking and leaving
    the child attached to the terminal.


author: Doug Ledford <dledford@redhat.com> 1.5.0-5
changelog:
  - Disable service mdmpd by default to avoid [Failed] messages on
    current 2.6 kernels.  Possibly re-enable it by default once the
    2.6 kernels have the md event interface.


author: Doug Ledford <dledford@redhat.com> 2.5.0-6
changelog:
  - Fix a bug in the postun scriptlet related to downgrading to a version
    of mdadm that doesn't include the mdmpd daemon.


author: Doug Ledford <dledford@redhat.com> - 1.5.0-9
changelog:
  - Fix Makefile and build method to satisfy bz #123769
  - Add mdmpd man page, update mdmpd version to 0.3 - bz #117160
  - Make sure mdadm --monitor closes all md device files so that md devices
    can be stopped while mdadm is still running - bz #119532


author: Doug Ledford <dledford@redhat.com> 1.6.0-1
changelog:
  - Update to newer upstream version
  - Make mdmpd work on kernels that don't have the event interface patch


author: Doug Ledford <dledford@redhat.com> 1.11.0-2.fc4
changelog:
  - Change the default auto= mode so it need not be on the command line to
    work with udev, however it is still supported on the command line (#132706)
  - Add a man page (from Luca Berra) for mdassemble


author: Doug Ledford <dledford@redhat.com> 1.11.0-4.fc4
changelog:
  - Make the mdmonitor init script use the pid-file option, major cleanup
    of the script now possible (#134459)


author: Warren Togami <wtogami@redhat.com> 2.2-1
changelog:
  - 2.2 upgrade (#167897)
  - disable diet because we don't ship it anymore
    and we don't actually use mdassemble now


author: Doug Ledford <dledford@redhat.com> - 2.5.4-1
changelog:
  - Update to 2.5.4 (listed as a bugfix update by upstream)
  - Remove previous bitmap patch that's now part of 2.5.4


author: Doug Ledford <dledford@redhat.com> - 2.6-1
changelog:
  - Update to latest upstream version
  - Remove the mdmpd daemon entirely.  Now that multipath tools from the lvm/dm
    packages handles multipath devices well, this is no longer needed.
  - Various cleanups in the spec file


author: Doug Ledford <dledford@redhat.com> - 2.6.2-1
changelog:
  - Update to latest upstream
  - Remove requirement for /usr/sbin/sendmail - it's optional and not on by
    default, and sendmail isn't *required* for mdadm itself to work, and isn't
    even required for the monitoring capability to work, just if you want to
    have the monitoring capability do the automatic email thing instead of
    run your own program (and if you use the program option of the monitor
    capability, your program could email you in a different manner entirely)


author: Doug Ledford <dledford@redhat.com> - 2.6.2-2
changelog:
  - Fix a file leak issue when mdadm is in monitor mode
  - Update mdadm init script so that status will always run and so
    return codes are standards compliant
  - Fix assembly of version 1 superblock devices
  - Make the attempt to create an already running device have a clearer
    error message
  - Allow the creation of a degraded raid4 array like we allow for raid5
  - Make mdadm actually pay attention to raid4 devices when in monitor mode
  - Make the mdmonitor script use daemon() correctly
  - Fix a bug where manage mode would not add disks correctly under certain
    conditions
  - Resolves: bz244582, bz242688, bz230207, bz169516, bz171862, bz171938
  - Resolves: bz174642, bz224272, bz186524


author: Doug Ledford <dledford@redhat.com> - 2.6.2-3
changelog:
  - Oops, had to update the file leak patch, missed one thing
  - Minor tweak to return codes in init script and add LSB header
  - Resolves: bz244582, bz246980


author: Doug Ledford <dledford@redhat.com> - 2.6.2-4
changelog:
  - Oops, if we call -C -e1, minor_version is no longer properly set, fix that
    up
  - Related: bz230207


author: Bill Nottingham <notting@redhat.com> - 2.6.4-4
changelog:
  - make /dev/md if necessary in incremental mode (#429604)
  - open RAID devices with O_EXCL to avoid racing against other --incremental processes (#433932)


author: Doug Ledford <dledford@redhat.com> - 2.6.7-1
changelog:
  - Update to latest upstream version (should resolve #444237)
  - Drop incremental patch as it's now part of upstream
  - Clean up all the open() calls in the code (#437145)
  - Fix the build process to actually generate mdassemble (#446988)
  - Update the udev rules to get additional info about arrays being assembled
    from the /etc/mdadm.conf file (--scan option) (#447818)
  - Update the udev rules to run degraded arrays (--run option) (#452459)


author: Doug Ledford <dledford@redhat.com> - 2.6.7.1-1
changelog:
  - Updated to latest upstream stable release (#466803)
  - Change udev rule to not assemble degraded arrays (#453314)
  - Fix metadata matching in config file (#466078)
  - Fix assembly of raid10 devices (#444237)
  - Fix incremental assembly of partitioned raid devices (#447818)


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel2.1
changelog:
  - Update to latest upstream devel release
  - Use the udev rules file included with mdadm instead of our own
  - Drop all the no longer relevant patches
  - Fix a build error in mdopen.c
  - Fix the udev rules path in Makefile
  - Fix a compile issue with the __le32_to_cpu() macro usage (bad juju to
    to operations on the target of the macro as it could get executed
    multiple times, and gcc now throws an error on that)
  - Add some casts to some print statements to keep gcc from complaining


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel2.2
changelog:
  - Readd our old mdadm rules file that does incremental assembly
  - Remove the new mdadm rules file from upstream as we already have this in
    our udev package (and the one in the udev package already has a bug fixed)


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.1
changelog:
  - Update to latest devel release
  - Remove the no longer necessary udev patch
  - Remove the no longer necessary warn patch
  - Remove the no longer necessary alias patch
  - Update the mdadm.rules file to only pay attention to device adds, not
    changes and to enable incremental assembly
  - Add a cron job to run a weekly repair of the array to correct bad sectors
  - Resolves: bz474436, bz490972


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.3
changelog:
  - Slightly tweak the udev rules to make sure we don't start arrays
    while running in rc.sysinit...leave array starting to it instead
  - Modify mdadm to put its mapfile in /dev/md instead of /var/run/mdadm
    since at startup /var/run/mdadm is read-only by default and this
    breaks incremental assembly
  - Change how mdadm decides to assemble incremental devices using their 
    preferred name or a random name to avoid possible conflicts when plugging
    a foreign array into a host


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.5
changelog:
  - Fix a few issues with the new code to determine when a device gets to
    keep its name and when it doesn't


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.6
changelog:
  - Only check raid devices automatically, do not attempt to repair them
    during the weekly data scrubbing


author: Doug Ledford <dledford@redhat.com> - 3.0-0.devel3.7
changelog:
  - Move the mdadm.map file from /dev/md/ to /dev/ so the installer doesn't
    need to precreate the /dev/md/ directory in order for incremental
    assembly to work


author: Doug Ledford <dledford@redhat.com> - 3.0-1
changelog:
  - Remove stale patches already accepted by upstream
  - Fix the raid-check script to only try and check a device if it is
    checkable
  - Update to official mdadm-3.0 version
  - Resolves: bz505587, bz505552


author: Doug Ledford <dledford@redhat.com> - 3.0-2
changelog:
  - Improved raid-check script as well as the ability to configure what devices
    get checked
  - Endian patch for uuid generation


author: Doug Ledford <dledford@redhat.com> - 3.0-3
changelog:
  - Update to current head of upstream git repo for various imsm related fixes
    (fixes bz523262)
  - Fix display of metadata version in output of Detail mode
  - Add UUID output to --detail --export (bz523314)


author: Hans de Goede <hdegoede@redhat.com> - 3.0.2-1
changelog:
  - New upstream release 3.0.2
  - Add a patch fixing mdadm --detail -export segfaults (bz526761, bz523862)
  - Add a patch making mdmon store its state under /dev/.mdadm for initrd
    mdmon, rootfs mdmon handover
  - Restart mdmon from initscript (when running) for rootfs mdmon handover


author: Doug Ledford <dledford@redhat.com> - 3.0.3-1
changelog:
  - New upstream release 3.0.3 (bz523320, bz527281)
  - Update a couple internal patches
  - Drop a patch in that was in Neil's tree for 3.0.3 that we had pulled for
    immediate use to resolve a bug
  - Drop the endian patch because it no longer applied cleanly and all attempts
    to reproduce the original problem as reported in bz510605 failed, even up
    to and including downloading the specific package that was reported as
    failing in that bug and trying to reproduce with it on both ppc and ppc64
    hardware and with both ppc and ppc64 versions on the 64bit hardware.
    Without a reproducer, it is impossible to determine if a rehashed patch
    to apply to this code would actually solve the problem, so remove the patch
    entirely since the original problem, as reported, was an easy to detect DOA
    issue where installing to a raid array was bound to fail on reboot and so
    we should be able to quickly and definitively tell if the problem resurfaces.
  - Update the mdmonitor init script for LSB compliance (bz527957)
  - Link from mdadm.static man page to mdadm man page (bz529314)
  - Fix a problem in the raid-check script (bz523000)
  - Fix the intel superblock handler so we can test on non-scsi block devices


author: Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.1
changelog:
  - Update to head of upstream git repo, which contains a significant number
    of bug fixes we need (bz543746)


author: Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.3
changelog:
  - Don't run the raid-check script if the kernel doesn't support
    md devices (bz557053)
  - Don't report any mismatch_cnt issues on raid1 devices as there are
    legitimate reasons why the count may not be 0 and we are getting enough
    false positives that it renders the check useless (bz554217, bz547128)


author: Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.4
changelog:
  - Fix problem with booting multiple imsm containers when they aren't listed
    "just so" in the mdadm.conf file (bz554974)


author: Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.5
changelog:
  - The uuid patch cause a different problem during assembly, so use a gross
    hack to work around the uuid issue that won't break assembly until fixed
    properly upstream (bz567132)


author: Doug Ledford <dledford@redhat.com> - 3.1.1-0.gcd9a8b5.6
changelog:
  - Newer version of imsm patch that leaves warning, but only when there
    actually are too many devices on the command line (bz554974)


author: Doug Ledford <dledford@redhat.com> - 3.1.2-1
changelog:
  - Grab latest upstream release instead of git repo snapshot (bz552344, bz572561)
  - The lack of /dev/md is causing problems, so add code to mapfile.c to cause
    us to create /dev/md if it doesn't exist (bz569019)


author: Doug Ledford <dledford@redhat.com> - 3.1.2-2
changelog:
  - Add a little more paranoia checking to the RebuildMap code to avoid ever
    having the same infinite loop as in bz569019 again even if we change file
    locations to somewhere where we can't create a mapfile


author: Doug Ledford <dledford@redhat.com> - 3.1.2-7
changelog:
  - Fix up directory in mdmonitor init script so that we restart mdmon like we
    are supposed to
  - Add a rule to run incremental assembly on containers in case there are
    multiple volumes in a container and we only started some of them in the
    initramfs
  - Make -If work with imsm arrays.  We had too restrictive of a test in
    sysfs_unique_holder.
  - Make incremental assembly of containers act like incremental assembly of
    regular devices (aka, --run is needed to start a degraded array)


author: Doug Ledford <dledford@redhat.com> - 3.1.3-0.git07202010.1
changelog:
  - Update to latest git repo (3.1.2 plus pending changes, fixes bz602457)
  - Add in 64-md-raid.rules to compensate for it no longer being in udev
    (bz581905)
  - Remove mdadm.static as its no longer used in initrd creation


author: Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100722.1
changelog:
  - Change git date format to the correct format (YYYYMMDD)
  - Update to latest upstream push (fixes bz604023)


author: Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100722.2
changelog:
  - Remove the glibc-static buildreq and don't build the static mdadm since
    we don't install it anyway
  - Remove the udev file since adding it was supposed to be a rawhide only change


author: Doug Ledford <dledford@redhat.com> - 3.1.3-0.git20100804.1
changelog:
  - Update to latest upstream release (resolves an issue with stale lock
    files on the md device map file)


author: Doug Ledford <dledford@redhat.com> - 3.1.5-1
changelog:
  - Update to latest upstream stable release
  - Update mdadm.rules file to honor noiswmd and nodmraid command line options
  - Ghost the directory in /var/run, create /var/run/mdadm in mdmonitor init
    script
  - Don't report mismatch counts on either raid1 or raid10
  - Check both active and idle arrays during raid check runs
  - Move the raid-check script from cron.weekly to /usr/sbin, add a crontab
    file to /etc/cron.d and mark it config(noreplace).  This way users can
    select their own raid-check frequency and have it honored through
    upgrades.
  - Allow the raid-check script to set the process and io priority of the
    thread performing the check in order to preserve responsiveness of the
    machine during the check.
  - Resolves: 633229, 656620. 679843, 671076, 659933


author: Milan Broz <mbroz@redhat.com> - 3.2.2-3
changelog:
  - Use unit files with systemd. (johannbg)
  - Add sub-package sysvinit for SysV init script.
  - Resolves: bz713573


author: Doug Ledford <dledford@redhat.com> - 3.2.2-8
changelog:
  - Rework the 65-md-incremental.rules file to add the following support:
    Nested md raid arrays should now work
    MD on top of LUKS or other lvm based devices should now work
    We should no longer grab multipath paths before multipath can


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-10
changelog:
  - Fix problem where a dirty IMSM RAID isn't assembled correctly during
    boot, preventing booting from this RAID device.
  - Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16)
  - Fix race between udev and mdadm when assembling md device using
    mdadm -I, where udev would spawn an additional mdadm command to
    perform the assembly in parallel.


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-12
changelog:
  - Backport upstream version of fix for IMSM RAID assembly problem,
    which resolves issues when booting off sysvinit based system.
  - Resolves: bz736387 (Fedora 15) bz744217 (Fedora 16)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-14
changelog:
  - Backport upstream fixes to prevent growing v0.90 metadata raid out
    of supported size.
  - Add missing 'disable' argument to systemctl in preun script
  - Resolves: bz735306 (Fedora 15) bz748731 (Fedora 16) bz748732 (rawhide),
    Resolves: bz751716


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.2-15
changelog:
  - Backport upstream fix for memory leak that can prevent migration to
    RAID5 from completing.
  - Backport upstream fix preventing mounting a device while it is in
    process of reshaping
  - Resolves: bz755005 bz755009


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-1
changelog:
  - Update to upstream 3.2.3
  - Resolves: bz770110 (rawhide) bz771413 (f16) bz759014 (rawhide)
  - Resolves: bz759015 (f16) bz759035 (rawhide) bz759036 (f16)
  - Resolves: bz771608 (f15) bz759016 (f15) bz759039 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-3
changelog:
  - Fix case where we have to retry in case a remove fails due to an array
    being busy
  - Resolves: bz773337 (rawhide) bz773340 (f16) bz773341 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-4
changelog:
  - Add support for --offroot to mdadm/mdmon
  - Resolves: bz785739 (rawhide) bz785737 (f16) bz771405 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-5
changelog:
  - Fix issue with devices failing to be added to a raid using bitmaps,
    due to trying to write the bitmap with mis-aligned buffers using
    O_DIRECT 
  - Resolves: bz789898 (f16) bz791189 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-6
changelog:
  - Fix double free on buggy old kernel sysfs read
  - Fix segfault if trying to write superblock to non existing device
  - Resolves: bz795707 (f17) bz795747 (f16) bz795748 (f15)
  - Resolves: bz795461 (f17) bz795749 (f16) bz795750 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-7
changelog:
  - Fix issue when re-adding drive to a raid1 array with bitmap
  - Resolves: bz807743 (f17) bz769323 (f16) bz791159 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-8
changelog:
  - Fix bug where IMSM arrays stay inactive in case a reboot is
  - performed during the reshape process.
  - Resolves: bz817522 (f17) bz817535 (f16) bz817537 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.3-9
changelog:
  - Fix Monitor mode sometimes crashes when a resync completes
  - Fix missing symlink for mdadm container device when incremental creates
    the array
  - Make sure when creating a second array in a container that the second
    array uses all available space since leaving space for a third array
    is invalid
  - Validate the number of imsm volumes per controller
  - Fix issues with imsm arrays and disks larger than 2TB
  - Add support for expanding imsm arrays/containers
  - The support for expanding imsm arrays/containers was accepted upstream,
    update to the official patches from there
  - Fix for the issue of --add not being very smart
  - Fix an issue causing rebuilds to fail to restart on reboot (data
    corrupter level problem)
  - Reset the bad flag on map file updates
  - Correctly fix failure when trying to add internal bitmap to 1.0 arrays
  - Resolves: bz817023 (f17) bz817024 (f17) bz817026 (f17) bz817028 (f17)
  - Resolves: bz817029 (f17) bz817032 (f17) bz817038 (f17) bz808774 (f17)
  - Resolves: bz817039 (f17) bz817042 (f17)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.4-2
changelog:
  - Fix mdadm.conf to use 'd' for /var/run/mdadm creation, to avoid the
    map file getting deleted during boot.


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.4-3
changelog:
  - Fix mdadm-3.2.4 introduced bug where --add fails in common cases
  - Resolves bz821717 (f17) bz821718 (f16) bz821719 (f15)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-2
changelog:
  - Fix uninstall script to remove dangling symlink to
    mdmonitor-takeover.service, if the mdadm package is uninstalled from
    the system.
  - Resolves bz828354


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-3
changelog:
  - Fix problem where reshape of RAID volume is broken after trying to
    stop all MD devices.
  - Enhance raid-check to allow the adming to specify the max number of
    concurrent arrays to be checked at any given time.
  - Resolves bz830177, bz820124


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-4
changelog:
  - Move /etc/tmpfiles.d/mdadm.conf to /lib/tmpfiles.d/ to comply with
    Fedora tmpfile rules
  - Resolves bz840187


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-7
changelog:
  - Remove bogus rogue patch applied in 3.2.5-5 with justification and
    without following the structure of the mdadm package.


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.5-13
changelog:
  - Relax installation requirements for abrt script to only depend on
    libreport-filesystem rather than the full abrt package


author: Doug Ledford <dledford@redhat.com> - 3.2.6-2
changelog:
  - Modify mdadm to set the cgroup of mdmon to systemd if it's available
  - Related bz873576 (and others)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-3
changelog:
  - Disallow creating a second IMSM RAID array size 0 (bz880972)
  - Disallow creating IMSM RAIDs that spans multiple controllers (bz880974)
  - Resolves bz880972, bz880974


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-5
changelog:
  - mdadm-sysvinit is obsolete given that we no longer support booting
    using sysvinit scripts
  - Resolves bz884993


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-7
changelog:
  - Fix issue with udev scripts where if an raid volume with one of
    the disks failing, the failed disk is still present in the volume
    and container. The raid volume stays is in normal state (should be
    degraded) and the rebuild cannot start.
  - Resolves bz886123


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-8
changelog:
  - mdmonitor-takeover.service is obsolete with the --offroot support,
    and it is harmful as of 3.2.6
  - Resolves bz834245


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-9
changelog:
  - Reintroduce fix for removing dangling symlink of
    mdmonitor-takeover.service which got lost in the fix introduced in
    3.2.6-8


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-11
changelog:
  - Move code to leave udev cgroup into mdmon and excute it after we
    work, to make sure it actually does the right thing.


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-12
changelog:
  - Launch mdmon via systemctl to avoid it ending up in the wrong cgroup
    and getting killed in the boot process when switching from the
    initrd to the real root.
  - Resolves bz879327


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-14
changelog:
  - Resync with final version of upstream patches for launching mdmon
    via systemctl. Require dracut 024-025 or later to match.
  - Resolves bz879327


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-16
changelog:
  - Rely on rpm macros to place files in correct directories, and match /usr
    move
  - Resolves bz955248


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-18
changelog:
  - Fix problem with IMSM metadata where resync progress would be lost
    if an array was stopped during ongoing expansion of a RAID1/5 volume.
  - Resolves bz948745


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-19
changelog:
  - Fix problem where  rebuild of IMSM RAID5 volume started in OROM,
    does not proceed in OS 
  - Resolves bz956021 (f18), bz956026 (f17), bz956031 (f19)


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-21
changelog:
  - Fix pointless rpmbuild noise over mismatching date info
  - Remove Fedora 17 support
  - Fix problem where first stop command doesn't stop container during
    IMSM volume's bz956059


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-22
changelog:
  - Check for DM_UDEV_DISABLE_OTHER_RULES_FLAG instead of
    DM_UDEV_DISABLE_DISK_RULES_FLAG in 65-md-incremental.rules 
  - Resolves bz1015515


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-28
changelog:
  - Fix problem with policy with path=* not working if there is no
    /dev/disk/by-path/ directory, as is the case with (S)ATA only systems
  - Resovles bz1045510


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-29
changelog:
  - Fix problem with mdadm crashing, if trying to create an IMSM array, with
    missing devices.
  - Resolves bz1056466


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-30
changelog:
  - Fix problem where Resync and recovery of RAID10 stopped at more than
    50% does not continue after reassemblation
  - Resolves bz1068154


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-31
changelog:
  - Fix problem of IMSM platform capabilities not being detected in UEFI
    mode when only the second SATA controller is enabled.
  - Resolves bz1074161


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-32
changelog:
  - Fix issue with mdmon not being launched correctly after reboot
    during container reshape second of a second RAID5 array, resulting in
    it being read-only and cannot be mounted.
  - Resolves bz1074970


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.2.6-33
changelog:
  - Fix problem with spare disk not being added correctly to IMSM array
    because mdmon is unable to write metadata to it.
  - Resolves bz1072979


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.3.2-3
changelog:
  - Fix issue where migration record was not always cleared after successful
    reshape.
  - Resolves rhbz#1183724


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-2
changelog:
  - Fix problem where it was not possible to stop an IMSM array during reshape
  - Resolves rhbz#1312837


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-4
changelog:
  - Fix problem with raid0 arrays not being detected by Anaconda due to it
    setting MALLOC_PERTURB_
  - Resolves rhbz#1324637


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-6
changelog:
  - Fix problem with reshaping IMSM arrays, where a new reshape could be
    launched before the first reshape had fully completed, leading to
    unpected results.
  - Resolves rhbz#1347762


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-12
changelog:
  - Apply additional required patch to fix buffer overrun using long device
    names
  - Resolves rhbz#1369891


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-13
changelog:
  - Make udev-md-array-arrays.rules more resilient to races if arrays are
    assembled and stopped and reassembled quick after each other.
  - Resolves rhbz#1331709


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-14
changelog:
  - The fix for 1331709 caused a problem with container arrays (IMSM) as
    these can show up with a valid size of 0. Work around this to only
    exit for non container arrays.
  - Resolves rhbz#1379194


author: Jes Sorensen <Jes.Sorensen@redhat.com> - 3.4-15
changelog:
  - Resolve case where a reshape could hang if started right after the
    completion of a resync.
  - Resolves rhbz#1386700


author: Xiao Ni <xni@redhat.com> - 4.0-4
changelog:
  - Imsm should not allow combing 512 and 4096 sector size disks in 
    one volume and Wrong array size shown for array built on 4096 
    sector size disks
  - Resolves rhbz#1454390 and rhbz#1454379


author: Rafael Aquini <aquini@linux.com> - 0.3.0-4
changelog:
  - Update upstream fixes for memkind-0.3.0
  - Switch old init.d scripts for systemd unit service
  - Fix fc24 build error


author: Karsten Hopp <karsten@redhat.com> 8.1-0.2
changelog:
  - move drirc into with_hardware section (Dave Airlie)
  - libdricore.so and libglsl.so get built and installed on
    non-hardware archs, include them in the file list


author: Ville Skyttä <ville.skytta@iki.fi> - 8.1-0.9
changelog:
  - Call ldconfig at -libglapi and -libxatracker post(un)install time.
  - Drop redundant ldconfig dependencies, let rpm auto-add them.


author: Dave Airlie <airlied@redhat.com> 9.0-0.1
changelog:
  - rebase to latest upstream 9.0 pre-release branch
  - add back glu from new upstream (split for f18 later)


author: Adam Jackson <ajax@redhat.com> 9.0-0.2
changelog:
  - Switch to swrast classic instead of softpipe for non-llvm arches
  - Re-disable llvm on ppc until it can draw pixels


author: Dan Horák <dan[at]danny.cz> 9.0-0.3
changelog:
  - explicit BR: libGL-devel is required on s390(x), it's probbaly brought in indirectly on x86
  - gallium drivers must be set explicitely for s390(x) otherwise also r300, r600 and vmwgfx are built


author: Dan Horák <dan[at]danny.cz> 9.0-3
changelog:
  - gallium drivers must be set explicitely for s390(x) otherwise also r300, r600 and vmwgfx are built


author: Adam Jackson <ajax@redhat.com> 9.0-4
changelog:
  - mesa-9.0-18-g5fe5aa8: sync with 9.0 branch in git
  - Portability fixes for F17: old wayland, old llvm.


author: Adam Jackson <ajax@redhat.com> 9.0.1-3
changelog:
  - mesa-9.0.1-22-gd0a9ab2.patch: Sync with git
  - Build with -fno-rtti -fno-exceptions, modest size and speed win
  - mesa-9.0.1-less-cxx-please.patch: Remove the only use of typeid() so the
    above works.


author: Adam Jackson <ajax@redhat.com> 9.2-0.1.20130508
changelog:
  - Switch to Mesa master (pre 9.2)
  - Fix llvmpipe on big-endian and enable llvmpipe everywhere
  - Build vdpau drivers for r600/radeonsi/nouveau
  - Enable hardware floating-point texture support
  - Drop GLESv1, nothing's using it, let's not start


author: Adam Jackson <ajax@redhat.com> 9.2-0.1.20130514
changelog:
  - Today's git snap
  - Revert to swrast on ppc32 and s390 since llvm doesn't actually work
  - Build freedreno on arm
  - Drop snb hang workaround (upstream 1dfea559)
  - Rename filesystem package


author: Dave Jones <davej@redhat.com>
changelog:
  - Only enable microcode_ctl service if the CPU is capable.
  - Prevent microcode_ctl getting restarted multiple times on initlevel change (#141581)
  - Make restart/reload work properly
  - Do nothing if not started by root.


author: Dave Jones <davej@redhat.com>
changelog:
  - Create/remove the /dev/cpu/microcode dev node as needed.
  - Use correct path again for the microcode.dat.
  - Remove some no longer needed tests in the init script.


author: Dave Jones <davej@redhat.com>
changelog:
  - Drop the node creation/deletion change from previous release.
    It'll cause grief with selinux, and was a hack to get around
    a udev shortcoming that should be fixed properly.


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Spec cleanup and macro standardization.
  - Update license
  - Update microcode data file to 20080131 revision.


author: Dave Jones <davej@redhat.com>
changelog:
  - Shorten sleep time during init.
    This really needs to be replaced with proper udev hooks, but this is
    a quick interim fix.


author: Kyle McMartin <kyle@redhat.com> 1.17-1.56
changelog:
  - Add AMD x86/x86-64 microcode. (Dated: 2009-10-09)
    Doesn't need microcode_ctl modifications as it's loaded by
    request_firmware() like any other sensible driver.
  - Eventually, this AMD firmware can probably live inside
    kernel-firmware once it is split out.


author: Anton Arapov <anton@redhat.com> 1.17-18
changelog:
  - Ship splitted microcode for Intel CPUs [#690930]
  - Include tool for splitting microcode for Intl CPUs (Kay Sievers )


author: Dan Williams <dcbw@redhat.com> - 1.20090707-1
changelog:
  - Update to latest upstream release including:
  - T-Mobile USA
  - Brazil
  - Bangladesh
  - Sweden
  - Spain
  - Moldova


author: Dan Williams <dcbw@redhat.com> - 1.20090918-1
changelog:
  - Update to latest upstream release including:
  - Algeria, Australia, Belarus, Belgium, Brazil
  - Brunei, Bulgaria, Egypt, Finland, Ghana, Greece
  - India, Italy, Kazakhstan, Korean CDMA operators
  - Kuwait, Mali, Netherlands, Paraguay, Serbia
  - Spain, Sweden, UK


author: Dan Williams <dcbw@redhat.com> - 1.20100122-1
changelog:
  - Update to latest upstream release including:
  - Cyprus, Austria, Ireland, Ukraine, Romainia, Cambodia (rh #530981), 
  - Iraq, India, Sri Lanka, UK, Australia, Singapore,
  - South Korea, Italy, United States, China (rh #517253), Nigeria,
  - Tanzania, Germany, Qatar, Russia, and Finland (rh #528988)


author: Matěj Cepl <mcepl@redhat.com> - 1.20101231-1
changelog:
  - Update to latest upstream checkout including:
  	Afghanistan, Argentina, Armenia, Australia, Austria, Bahrain, Canada,
  	Croatia, Denmark, Dominican Republic, Finland, France, French Polynesia,
  	Germany, Greece, Hong Kong, Hungary, China, Iceland, India, Indonesia,
  	Iran, Israel, Israel, Italy, Latvia, Luxembourg, Mexico, Montenegro,
  	Netherlands, New Zealand, Nicaragua, Norway, Paraguay, Philippines,
  	Poland, Portugal, Romania, Rwanda/Burundi, Slovakia, Slovenia, Spain,
  	Sudan, Sweden, Switzerland, Thailand, Tunisia, Uganda, United Arab
  ,


author: Matěj Cepl <mcepl@redhat.com> - 1.20110218-1
changelog:
  - Update to latest upstream checkout including:
  	* south africa: add 8.ta (Telkom) provider (bgo #641916),
  	  remove username for Cell-C (bgo #640794)
  	* switzerland: update Orange plans and APNs (bgo #638115)
  	* tanzania: add Sasatel and TTCL, add CDMA for Zantel (bgo #634609)
  	* india: new unified BSNL APNs (rh #667280)
  	* ec: add Movistar Ecuador (bgo #638223)


author: Simo Sorce <simo@redhat.com> 1.3.1-1
changelog:
  - Various bugfixes and minor new features
  - resolves: #1258168
  - resolves: #1258171
  - resolves: #1258172
  - resolves: #1258456


author: Simo Sorce <simo@redhat.com> 0.7.0-0
changelog:
  - Initial Fedora release based on version 0.7.0
  - Based on an old spec file by Jean-Marc Liger <jmliger@siris.sorbonne.fr>


author: Simo Sorce <simo@redhat.com> 0.7.0-3
changelog:
  - Backport of useful patches from upstream
    - Better handling of IDP reported errors
    - Better handling of session data storage size


author: Simo Sorce <simo@redhat.com> 0.8.0-1
changelog:
  - New upstream realease version 0.8.0
  - Upstream moved to github
  - Drops patches as they have been all included upstream


author: John Dennis <jdennis@redhat.com> - 0.10.0-1
changelog:
  - Rebase to upstream 0.10.0 release
  - Apply upstream commits post 0.10.0 release
  - Apply ECP pending patches
  - Resolves: #1205345


author: John Dennis <jdennis@redhat.com> - 0.10.0-2
changelog:
  - Rebase to upstream 0.10.0 release
  - Apply upstream commits post 0.10.0 release
  - Apply revised ECP pending patches
  - Resolves: #1205345


author: John Dennis <jdennis@redhat.com> - 0.10.0-3
changelog:
  - Rebase to upstream 0.10.0 release
  - Apply upstream commits post 0.10.0 release
  - Apply revised ECP pending patches,
    fix patch to pickup change in configure script that causes
    HAVE_ECP to be defined
  - Resolves: #1205345


author: John Dennis <jdennis@redhat.com> - 0.11.0-1
changelog:
  - Upgrade to upstream 0.11.0 release.
  - Includes ECP support, see NEWS for all changes.
  - Update mellon_create_metadata.sh to match internally generated metadata,
    includes AssertionConsumerService for postResponse, artifactResponse &
    paosResponse.
  - Add lasso 2.5.0 version dependency
  - Resolves: #1205345


author: John Dennis <jdennis@redhat.com> - 0.11.0-2
changelog:
  - Resolves: bug #1296286
    mod_auth_mellon emits CRITICAL warning message in Apache log when doing ECP
  - Resolves: bug #1324536
    Installing mod_auth_mellon causes working Kerberos authentication
    to start failing
  - Add ECP.rst documentation file that was erroneously omitted


author: John Dennis <jdennis@redhat.com> - 0.11.0-4
changelog:
  - Resolves: rhbz#1414021 - Incorrect Content-Type header in ECP PAOS
    Rebuilding due to missing comment in Changelog


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.6-1
changelog:
  - Make pam_authenticate_with_login_password available for other modules.
  - Reformat documentation to make the Basic Auth usage less prominent.


author: Jeff Johnson <jbj@redhat.com> 0.15-3687.0
changelog:
  - first build from adapted spec file, only client and libraries for now.
  - internal apr/apr-utils/neon until incompatibilities sort themselves out.
  - avoid libdir issues on x86_64 for the moment.


author: Joe Orton <jorton@redhat.com> 0.22.2-1
changelog:
  - update to 0.22.2; add mod_dav_svn subpackage
  - include Python bindings
  - neon: force use of expat, enable SSL
  - drop check for specific apr version added in -3


author: Jeff Johnson <jbj@redhat.com> 0.22.2-2
changelog:
  - use external neon-0.23.9-2 (i.e. with neon-config), drop internal neon.
  - use db-4.1.25, not db-4.0.14.
  - do "make check" (but ignore failure for now).
  - s390x knows not of httpd >= 2.0.45.


author: Joe Orton <jorton@redhat.com> 1.0.0-2
changelog:
  - add fix for lack of apr_dir_read ordering guarantee (Philip Martin)
  - enable compression in ra_dav by default (Tobias Ringström)


author: Joe Orton <jorton@redhat.com> 1.0.2-2
changelog:
  - add perl MODULE_COMPAT requirement for -perl subpackage
  - move perl man pages into -perl subpackage
  - clean up -perl installation and dependencies (Ville Skyttä, #123045)


author: Joe Orton <jorton@redhat.com> 1.1.3-7
changelog:
  - restore swig bindings support (from upstream via Max Bowsher, #141343)
  - tweak SELinux commentary in default subversion.conf


author: Joe Orton <jorton@redhat.com> 1.1.3-8
changelog:
  - further swig bindings fix (upstream via Max Bowsher, #151798)
  - fix perl File::Path dependency in filter-requires.sh


author: Joe Orton <jorton@redhat.com> 1.2.0-3
changelog:
  - update to 1.2.1
  - fix BuildRequires for ruby and apr-util (#163126)
  - drop static library archives


author: Joe Orton <jorton@redhat.com> 1.2.3-3
changelog:
  - update to 1.2.3
  - update to psvn.el r16070 from Stefan Reichoer
  - merge subversion.conf changes from RHEL4
  - merge filter-requires.sh changes from FC4 updates


author: Joe Orton <jorton@redhat.com> 1.3.2-2
changelog:
  - update to 1.3.2
  - fix Ruby sitelibdir (Garrick Staples, #191611)
  - own /etc/subversion (#189071)
  - update to psvn.el r19857


author: Joe Orton <jorton@redhat.com> 1.4.3-3
changelog:
  - update to 1.4.3 (#228691)
  - remove trailing dot from Summary
  - use current preferred standard BuildRoot
  - add post/postun ldconfig scriptlets for -ruby and -javahl


author: Joe Orton <jorton@redhat.com> 1.4.4-2
changelog:
  - update to 1.4.4
  - add Provides: svn (#245087)
  - fix without-java build (Lennert Buytenhek, #245467)


author: Joe Orton <jorton@redhat.com> 1.4.4-3
changelog:
  - fix build with new glibc open()-as-macro
  - build all swig code in %build, not %install
  - BuildRequire perl(Test::More), perl(ExtUtils::MakeMaker)


author: Joe Orton <jorton@redhat.com> 1.4.4-4
changelog:
  - trim dependencies from .la files
  - detabify spec file
  - test suite disabled to ease stress on builders


author: Joe Orton <jorton@redhat.com> 1.5.6-3
changelog:
  - update to 1.5.6
  - autoload psvn (#238491, Tom Tromey)
  - regenerate swig bindings (#480503)
  - fix build with libtool 2.2 (#469524)


author: Ville Skyttä <ville.skytta@iki.fi> - 1.6.5-3
changelog:
  - Apply svn2cl upstream patch to fix newline issues with libxml2 2.7.4+,
    see http://bugs.debian.org/546990 for details.


author: Ville Skyttä <ville.skytta@iki.fi> - 1.6.6-5
changelog:
  - Include svn2cl and its man page only in the -svn2cl subpackage (#558598).
  - Do not include bash completion in docs, it's installed.


author: Ville Skyttä <ville.skytta@iki.fi> - 1.7.0-2
changelog:
  - Fix apr Conflicts syntax in -libs.
  - Fix obsolete chown syntax in subversion.conf.
  - Fix use of spaces vs tabs in specfile.


author: Joe Orton <jorton@redhat.com> - 1.7.3-2
changelog:
  - add upstream test suite fixes for APR hash change (r1293602, r1293811)
  - use ruby vendorlib directory (#798203)
  - convert svnserve to systemd (#754074)


author: Vít Ondruch <vondruch@redhat.com> - 1.7.8-6
changelog:
  - Rebuild for https://fedoraproject.org/wiki/Features/Ruby_2.0.0
  - Drop Ruby version checks from configuration script.
  - Fix and enable Ruby test suite.


author: Joe Orton <jorton@redhat.com> - 1.7.9-2
changelog:
  - try harder to avoid svnserve bind failures in ruby binding tests
  - enable verbose output for ruby binding tests


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.9.7-1
changelog:
  - No longer call lookup_identity_hook explicitly, hook order does
    the same.
  - Silence compile warnings by specifying C99.


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.9.8-1
changelog:
  - 1109923 - Fix module loading/configuration for Apache 2.4.
  - Document the runtime dependency on pam_authenticate_with_login_password.
  - Comment/code cleanup.


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.6-1
changelog:
  - Use org.freedesktop.sssd.infopipe.GetUserGroups for group lists.
  - Support new org.freedesktop.sssd.infopipe.GetUserAttr parameters /
    return values.
  - Removed LookupOutputGroupsSeparator.
  - LookupOutputGroups and LookupUserAttr now support separator as
    optional second parameter.
  - Added LookupUserGroupsIter and LookupUserAttrIter.
  - Added LookupDbusTimeout.


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.8.1-1
changelog:
  - Ensure we run before mod_headers so that our result can be put to
    request headers for mod_proxy.


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.9.0-1
changelog:
  - Add support for '+'-prefixed note/variable names.
  - Silence compile warnings by specifying C99.
  - Fix format of logs of dbus calls.


author: Rob Crittenden <rcritten@redhat.com> 1.0.6-2
changelog:
  - Patch to properly detect the Apache model and set up NSS appropriately
  - Patch to punt if a bad password is encountered
  - Patch to fix crash when password.conf is malformatted
  - Don't enable ECC support as NSS doesn't have it enabled (3.11.4-0.7)


author: Rob Crittenden <rcritten@redhat.com> 1.0.7-1
changelog:
  - Update to 1.0.7
  - Remove Requires for nss and nspr since those are handled automatically
    by versioned libraries
  - Updated URL and Source to reference directory.fedoraproject.org


author: Rob Crittenden <rcritten@redhat.com> - 1.0.7-4
changelog:
  - Apply patch so that mod_nss calls NSS_Init() after Apache forks a child
    and not before. This is in response to a change in the NSS softtokn code
    and should have always been done this way. (444348)
  - The location of libnssckbi moved from /usr/lib[64] to /lib[64]
  - The NSS database needs to be readable by apache since we need to use it
    after the root priviledges are dropped.


author: Rob Crittenden <rcritten@redhat.com> - 1.0.7-6
changelog:
  - Update the patch for FIPS to include fixes for nss_pcache, enforce
    the security policy and properly initialize the FIPS token.


author: Rob Crittenden <rcritten@redhat.com> - 1.0.7-7
changelog:
  - Don't inherit the MP cache in multi-threaded mode (454701)
  - Don't initialize NSS in each child if SSL isn't configured


author: Rob Crittenden <rcritten@redhat.com> - 1.0.8-4
changelog:
  - Patch to add configuration options for new NSS negotiation API (#574187)
  - Add (pre) for Requires on httpd so we can be sure the user and group are
    already available
  - Add file Requires on libnssckbi.so so symlink can't fail
  - Use _sysconfdir macro instead of /etc
  - Set minimum level of NSS to 3.12.6


author: Rob Crittenden <rcritten@redhat.com> - 1.0.8-9
changelog:
  - Revert mod_nss-wouldblock patch
  - Reset NSPR error before calling PR_Read(). This should fix looping
    in #620856


author: Rob Crittenden <rcritten@redhat.com> - 1.0.8-18
changelog:
  - Actually apply the patch to use memmove in place of memcpy since the
    buffers can overlap (#669118)


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.8-21
changelog:
  - Bugzilla Bug #884115 - Package mod_nss-1.0.8-18.1.el7 failed RHEL7 RPMdiff
    testing
  - Bugzilla Bug #906082 - mod_nss requires manpages for gencert and nss_pcache
  - Bugzilla Bug #906089 - Fix dangling symlinks in mod_nss
  - Bugzilla Bug #906097 - Correct RPM Parse Warning in mod_nss.spec
  - Bugzilla Bug #948601 - Man page scan results for mod_nss


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.8-21.1
changelog:
  - Add the following explanation to the 'Dangling symlinks' textbox in rpmdiff:
    Symlink 'etc/httpd/alias/libnssckbi.so' is deliberate.
    This test does not belong in rpmdiff. This test belongs in TPS.
    Since the symlink points to a file in another package, e.g. a
    dependency or a system file, rpmdiff cannot detect this. Remember,
    rpmdiff does not install or even know about package dependencies.
    That's TPS's job.
  - Add the following explanation to the 'Brewtap results' textbox in rpmdiff:
    The '/etc/httpd/conf.d/nss.conf' file does not require a man page
    because its parameters are sufficiently documented within the
    configuration file itself.
    The '/etc/httpd/conf.modules.d/10-nss.conf' file does not require
    a man page because the file merely contains the line
    'LoadModule nss_module modules/libmodnss.so' to support httpd
    loading of Dynamic Shared Objects ('/etc/httpd/conf/httpd.conf').


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.8-24
changelog:
  - Add '--enable-ecc' option to %configure line under %build section of
    this spec file (mharmsen)
  - Bumped version build/runtime requirements for NSPR and NSS (mharmsen)
  - [mod_nss-PK11_ListCerts_2.patch]
  - Bugzilla Bug #1022295 - PK11_ListCerts called to retrieve all user
    certificates for every server (rcritten)
  - [mod_nss-array_overrun.patch]
  - Bugzilla Bug #1022298 - overrunning array when executing nss_pcache
    (rcritten)
  - [mod_nss-clientauth.patch]
  - Bugzilla Bug #1022921 - mod_nss: FakeBasicAuth authentication bypass
    [rhel-7.0] (rcritten)
  - [mod_nss-no_shutdown_if_not_init_2.patch]
  - Bugzilla Bug #1022303 - File descriptor leak after "service httpd reload"
    or httpd doesn't reload (rrelyea)
  - [mod_nss-proxyvariables.patch]
  - Bugzilla Bug #1022309 - mod_nss insists on Required value NSSCipherSuite
    not set. (mharmsen)
  - [mod_nss-tlsv1_1.patch]
  - Bugzilla Bug #1022310 - current nss support TLS 1.1 so mod_nss should pick
    it up (mharmsen)
  - [mod_nss-sslmultiproxy_2.patch]
  - Fixes Bugzilla Bug #1021458 - [RFE] Support ability to share mod_proxy with
    other SSL providers (jorton, mharmsen, nkinder, & rcritten)


author: Joe Orton <jorton@redhat.com> - 1.0.8-26
changelog:
  - [mod_nss-SSLEngine-off.patch]
  - Bugzilla Bug #1029042 - Implicit SSLEngine for 443 port breaks mod_nss
    configuration (jorton)
  - [mod_nss-unused-filter_ctx.patch]
  - Bugzilla Bug #1029665 - Remove unused variable 'filter_ctx' (mharmsen)


author: Rob Crittenden <rcritten@redhat.com> - 1.0.8-27
changelog:
  - Resolves: CVE-2013-4566
  - Bugzilla Bug #1024536 - mod_nss: incorrect handling of NSSVerifyClient in
    directory context [rhel-7.0] (rcritten)
  - Bugzilla Bug #1030845 - mod_nss: do not use %configure in %changelog
    (mharmsen)


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.8-28
changelog:
  - Resolves: rhbz #1030276
  - [mod_nss-usecases.patch]
  - Bugzilla Bug #1030276 - mod_nss not working in FIPS mode


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.8-30
changelog:
  - Resolves: rhbz #1029360
  - Bugzilla Bug #1029360 - ambiguous/invalid ENVR in httpd-mmn Provides/Requires


author: Matthew Harmsen <mharmsen@redhat.com> - 1.0.8-31
changelog:
  - Resolves: rhbz #1029360
  - Bugzilla Bug #1029360 - ambiguous/invalid ENVR in httpd-mmn Provides/Requires
  - corrected typo on date


author: Rob Crittenden <rcritten@redhat.com> - 1.0.11-3
changelog:
  - Fix logical and support in cipher strings CVE-2015-3277
    (#1253570)
  - Add missing BuildRequires and small patch to use requests.urllib3
    to fix make check (#1253570)


author: Rob Crittenden <rcritten@redhat.com> - 1.0.11-5
changelog:
  - Don't enable NULL ciphers in DEFAULT macro (#1253570)
  - Add OpenSSL cipher macro EECDH (#1160745)
  - Disable the live server testing in make check because it
    may run as root and fail horribly (#1160745)


author: Rob Crittenden <rcritten@redhat.com> - 1.0.11-6
changelog:
  - Add the supported NSS SHA384 ciphers (#1253570)
  - Add kECDH, AECDH, ECDSA and aECDSA macros (#1253570)
  - Bump the NSS BR and Requires so the new ciphers are available
  - Bump the NSPR Requires to match NSS


author: Rob Crittenden <rcritten@redhat.com> - 1.0.14-1
changelog:
  - Rebase to 1.0.14 (#1299063)
  - Add support for Server Name Indication (SNI) (#1053327)
  - Use upstream method to not execute live tests as root (#1256887)
  - Always call SSL_ShutdownServerSessionIDCache() in ModuleKill
    (#1263301, #1296685)
  - Don't require NSSProxyNickname (#1280287)
  - Make link to libnssckbi.so an absolute link (#1288471)
  - Fail for colons in credentials with FakeBasicAuth (#1295970)
  - Don't ignore NSSProtocol when NSSFIPS is enabled (#1312491)
  - Check filesystem permissions on NSS database at startup (#1312583)
  - OpenSSL ciphers stopped parsing at +, CVE-2016-3099 (#1323913)
  - Patch to match available ciphers so tests pass (#1299063)
  - Patch to fix tests in brew (#1299063)


author: Rob Crittenden <rcritten@redhat.com> - 1.0.14-6
changelog:
  - Check the NSS certificate database directory for read permissions
    by the Apache user. (#1312583)


author: Rob Crittenden <rcritten@redhat.com> - 1.0.14-8
changelog:
  - Fail start start when there are invalid Protocols defined (#1389114)
  - Handle group membership when testing NSS database filesystem
    permissions (#1395300)
  - Add OCSP cache tuning directives (#1392582) 
  - Don't share mod_nss NSS database with nss_pcache (#1382102)


author: Rob Crittenden <rcritten@redhat.com> - 1.0.14-9
changelog:
  - Update nss_pcache.8 to drop directory and prefix options (#1382102)

  - Don't share mod_nss NSS database with nss_pcache (#1382102)


author: Doug Ledford <dledford@redhat.com> - 1.4-2.el6
changelog:
  - Update to tarball from URL instead of from OFED
  - Minor tweaks for pkgwrangler import
  - Related: bz543948


author: Doug Ledford <dledford@redhat.com> - 1.4-3.el6
changelog:
  - Don't include mtcr.h as we don't really expect anything to need Mellanox
    card register definitions except this program, and we already have the
    file.
  - Change to ExcludeArch instead of ExclusiveArch so we build in all the right
    places.
  - Related: bz543948


author: Doug Ledford <dledford@redhat.com> - 1.4-7
changelog:
  - The upstream tarball as provided is broken.  Clean up the tarball so
    the package builds properly


author: Doug Ledford <dledford@redhat.com> - 3.0-0.6.g6961daa.1
changelog:
  - Update to latest upstream version, which resovles some licensing issues
    on some of the source files


author: Bill Nottingham <notting@redhat.com>
changelog:
  - get correct manual path the Right Way(tm)
  - make it so it uses default colors even if COLORFGBG isn't set


author: Nalin Dahyabhai <nalin@redhat.com> 5:1.4.1-10
changelog:
  - expect the server to prompt for additional auth data if we have some to
    send (#129961, upstream #1845)
  - use "pop" as the service name instead of "pop-3" when using SASL for POP,
    per rfc1734


author: Bill Nottingham <notting@redhat.com> 5:1.4.2.1-1
changelog:
  - update to 1.4.2.1 (#141007, <moritz@barsnick.net>)
  - include a /etc/Muttrc.local for site config (#123109)
  - add <f2> as a additional help key for terminals that use <f1> internally
    (#139277)


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.4.2.2-1
changelog:
  - update to 1.4.2.2
  - fix directories in manual.txt (#162207)
  - drop bcc patch (#197408)
  - don't package flea


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.14-2
changelog:
  - add check_mbox_size configuration variable; if enabled, file size is used
    instead of access time when checking for new mail
  - bind delete key to delete-char (#232601)


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.14-4
changelog:
  - validate msgid in APOP authentication (CVE-2007-1558)
  - fix overflow in gecos field handling (CVE-2007-2683)


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.17-2
changelog:
  - don't ignore $from in batch send mode (#392861)
  - check Maildir for not being NULL when expanding '='-paths
  - prevent mailto parsing buffer overflow by ignoring too long header
  - use strtok_r() to parse mailto: links, not strtok()
  - update UPDATING


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.17-4
changelog:
  - fix sending long commands when using gnutls (#438275)
  - glob tilde in smime_keys (#424311)
  - fix awk script in mutt_ldap_query
  - force building with libdb
  - make enabling/disabling features in spec easier


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.18-2
changelog:
  - allow interrupts when reading, writing or closing sockets (#447887)
  - fix possible crash when opening IMAP mailbox


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.19-4
changelog:
  - use PATH_MAX for buffers passed to realpath (#492861)
  - unconditionally inode-sort Maildir and MH folders
  - restore connection polling callback when closing SASL connection


author: Miroslav Lichvar <mlichvar@redhat.com> 5:1.5.19-5
changelog:
  - fix certificate verification (CVE-2009-1390)
  - add support for gnutls INSECURE_ALGORITHM error code (#499390)


author: Honza Horak <hhorak@redhat.com> - 5:1.5.21-8
changelog:
  - Removed ca-bundle.crt since it is outdated (rhbz#734379)
  - Build with gpgme support by default (rhbz#748337)
  - Fixed segmentation fault during messages removal in thread mode
    (rhbz#674271)


author: Honza Horak <hhorak@redhat.com> - 5:1.5.21-12
changelog:
  - Fix segmentation fault while syncing mailbox
    (rhbz#691719)
  - Fix unhandled strchr output
    (rhbz#833044)


author: Matej Muzila <mmuzila@redhat.com> 5:1.5.21-27
changelog:
  - Resolves #1388511 (System default CA bundle not set as default in compiled-in
    default or config)
  - Resolves #1388512 (mutt sends e-mail with broken "From" header, which has no
    host part)


author: Adam Jackson <ajax@redhat.com> 3.4.1-3
changelog:
  - mutter-never-slice-shape-mask.patch, mutter-use-cogl-texrect-api.patch:
    Fix window texturing on hardware without ARB_texture_non_power_of_two
    (#813648)


author: Owen Taylor <otaylor@redhat.com> - 3.8.4-7
changelog:
  - Add an upstream patch that fixes a bug with left-over window
    shadows that show up when we add patches to Clutter to stop
    redrawing the entire screen on every window move.
    Resolves: rhbz#1063984


author: Owen Taylor <otaylor@redhat.com> 3.8.4-13
changelog:
  - Add patches for quadbuffer stereo suppport
    Fix a bad performance problem drawing window thumbnails
    Resolves: rhbz#861507


author: Rui Matos <rmatos@redhat.com> - 3.14.4-17
changelog:
  - Fix a crash when plugging monitors
    Resolves: #1275215
  - Avoid a critical message when unplugging monitors
    Resolves: #1275220
  - Fix monitors remaining undetected on resume from suspend
    Resolves: #1219476


author: Owen Taylor <otaylor@redhat.com> - 3.14.4-20
changelog:
  - Rebase and add back stereo support patch that was dropped in
    update to 3.14.
  - Retain the last active window for seamless restarts.
    Resolves: #1305076


author: Owen Taylor <otaylor@redhat.com> - 3.14.4-26
changelog:
  - Turn on newly added "threaded swap wait" functionality in Cogl
    so that on NVIDIA cards, frame completion is handled in a proper
    non-blocking fashion, fixing bugs with idles not running when
    they should.
    Resolves: #1305076


author: Rui Matos <rmatos@redhat.com> - 3.14.4-29
changelog:
  - Allow clutter to fallback to the classic gl driver since mesa's
    software driver doesn't support gl3
    Related: #1361251


author: Florian Müllner <fmuellner@redhat.com> - 3.24.3-11
changelog:
  - Prevent crash when removing workspace with on-all-workspaces windows
    present (like desktop icons)
  - Resolves: #1453065


author: Doug Ledford <dledford@redhat.com> - 1.0.3-2
changelog:
  - Make scriptlets match mvapich
  - Include a Requires(post) and Requires(preun) so installs work properly
  - Resolves: bz465448


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Add Group: to -devel
  - Split into subpackages as required by packaging guidelines
  - cleanup BuildRequires
  - attempt to build on ppc
  - cleanup spec file
  - cleanup mvapich2.pc, still not correct, but closer
    Related: bz543948


author: Jay Fenlason <fenlason@redhat.com> 1.4-2.el6
changelog:
  - Add BuildRequires: python
  - Add BuildRequires: java
  - Remove the pkgconfig file entirely
    Related: bz543948


author: Doug Ledford <dledford@redhat.com> - 1.4-3.el6
changelog:
  - Fix an issue with usage of _cc_name_suffix that caused a broken define in
    our module file
    Related: bz543948


author: Jay Fenlason <fenlason@redhat.com> 1.4-4.el6
changelog:
  - Move -devel requires to the -devel subpackage.
    Resolves: bz568450
  - Add defattr as required by packaging guidelines
    Related: bz555835


author: Jay Fenlason <fenlason@redhat.com> 1.6-1.el6
changelog:
  - New upstream release, with different build process, and without
    man pages, because we don't have the sowing package, and its
    licensing status is unclear (no licence description of any kind in
    the tarball).
    Related: rhbz725016


author: Jay Fenlason <fenlason@redhat.com> 1.6-2.el6
changelog:
  - Fix the psm RPM macros so that we can build a -psm variant of
    mpitests
  - remove the osu-micro-benchmarks, which are being installed with a
    bogus rpath, and which are included in mpitests
    Related: rhbz725016


author: Jay Fenlason <fenlason@redhat.com> 1.6-3.el6
changelog:
  - Change the requires on mvapich2-psm-devel to mvapich2-psm from mvapich2
    so that mpitests will build
  - clean up the build to not use .{non-}psm directories.
    Related: rhbz725016


author: Jay Fenlason <fenlason@redhat.com> 1.8-1
changelog:
  - New upstream version, with man pages again.
    This fixes the following bugs:
    Related: rhbz739138
    Resolves: rhbz613696
    Resolves: rhbz625620
    Resolves: rhbz735954
    Resolves: rhbz782263


author: Jay Fenlason <fenlason@redhat.com> 1.8-2
changelog:
  - Add BuildRequires on flex and bison
  - Add "export AR=ar" to allow builds on RHEL-7 to work.
    Resolves: rhbz822527


author: Jay Fenlason <fenlason@redhat.com> 1.8-3
changelog:
  - Move the module files to the (correct for RHEL-7) mpi/ directory.
  - Add MANPATH to the module files.


author: Jay Fenlason <fenlason@redhat.com> 2.0a-1
changelog:
  - Add Build Requires on autoconf, automake, libtool,
    perl-Digest-MD5, hwloc-devel, and libibmad-devel.
  - remove build requires on java
  - New upstream version, edited so it can pass a license audit.
    Resolves: rhbz1001718


author: Kyle McMartin <kmcmarti@redhat.com> - 2.0a-3
changelog:
  - aarch64: add get_cycles implementation since <asm/timex.h> is not
    an exported header.
  - Resolves: #1100046


author: Michal Schmidt <mschmidt@redhat.com> - 2.2-0.1.rc1
changelog:
  - Update to 2.2rc1
  - Includes -psm2 variant for Intel OPA.
  - Still build the previous version for compatibility, as 2.0 subpackages.
  - Resolves: #948504
  - Resolves: #1093453
  - Resolves: #1173318


author: Gregory Leblanc <gleblanc@grego1.cu-portland.edu>
changelog:
  - Added BuildRequires lines
  - Changed Source to point to ftp.gnome.org instead of just the tarball name
  - Moved %description sections closer to their %package sections
  - Moved %changelog to the end, where so that it's not in the way
  - Changed configure and make install options to allow moving of
    libraries, includes, binaries more easily
  - Removed hard-coded paths (don't define %prefix or %docdir)
  - replace %{prefix}/bin with %{_bindir}
  - replace %{prefix}/share with %{_datadir}
  - replace %{prefix}/lib with %{_libdir}
  - replace %{prefix}/include with %{_includedir}


author: Havoc Pennington <hp@redhat.com>
changelog:
  - move to a CVS snapshot of nautilus for now
    (Darin is my hero for having distcheck work out of CVS)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 1.0.4, removes eazel services icon and wizard page
  - Eazel logo is still in startup wizard for now, needs fixing


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Change default background and rubberband color.
  - Use the sidebar tabs from the default theme
  - BuildDepend on fam-devel, depend on fam
  - Disable the eazel update pages in the first-time druid.
  - Remove the eazel logo from the first-time druid


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Make the fam dependency a real runtime dependency
  - by linking to libfam (nautilus-1.0.4-fam-lib.patch)
  - Cleaned up specfile.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - update to my latest 'cvs diff -u' (adds default 
    Start Here link, displays .directory name in sidebar)
  - include /etc/X11/* links (starthere, sysconfig, serverconfig)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - move first time druid patch into my "CVS outstanding" patch
  - try to really remove Help/Feedback
  - try to really fix Help/Community Support
  - try again to get Start Here in the Go menu
  - try again to get Start Here on the desktop
  - don't show file sizes for .desktop files


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add BuildRequires (#49539, 49537)
  - Fix %post, %postun (#49720)
  - Background efficiency improvements and hacks


author: Havoc Pennington <hp@redhat.com>
changelog:
  - sync new tarball from our CVS branch, 
    fixes some drag-and-drop, changes URI scheme names,
    etc.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Fix crash-on-startup showstopper
  - Fix can't-find-images bug (this one was only showing up
    when built with debug symbols, since it was an uninitialized memory
    read)


author: Alexander Larsson <alexl@redhat.com> 1.0.4-21
changelog:
  - Remove the "don't run as root" warning.
  - Remove eazel from bookmarks
  - langified (again? did someone change it?)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Sync our CVS version; fixes some MUSTFIX
    (the one about drawing background on startup, 
     properly translate desktop files, etc.)


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Changed starthere .desktop files to be links instead
  - of spawning a new nautilus. This makes start-here:
  - much faster.


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fix problem with missing desktop starthere.desktop file
  - New snapshot from our branch, fixes:
    - On upgrade, icons migrated from GNOME desktop are not properly lined up
      (#51436)
    - icons dropped on the desktop don't end up where dropped. (#51441)
    - Nautilus shouldn't have fam monitor read-only windows. This
      keeps CDROMS from being unmounted until you close all

      nautilus windows pointing to them. (#51442)
    - Warnings about 'cannot statfs...' when moving items to trash.
  - Use separate start-here.desktop for panel, since the one used
    for the root window only works from Nautilus.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - make start here icon work again
  - kill some warning spew, #51661
  - cache getpwnam() results to speed things up a bit


author: Havoc Pennington <hp@redhat.com>
changelog:
  - make Programs icon into a link, to match the other .desktop files
  - own various directories #51164
  - web page titles in Japanese, #51709
  - tree defaults to only directories #51850


author: Havoc Pennington <hp@redhat.com>
changelog:
  - fix bug causing 32000 stats or so in large directories, 
    should speed things up somewhat
  - fix #52104 via gruesome kdesktop-detection hack and setting
    window type hint on our desktop window
  - fix so Start Here icon displays in sidebar
  - don't load non-local .desktop files


author: Havoc Pennington <hp@redhat.com>
changelog:
  - I screwed up the build yesterday, so it didn't actually contain the
    fixes mentioned. This build should contain them.


author: Christopher Blizzard <blizzard@redhat.com>
changelog:
  - require Mozilla 0.9.7
  - Add patch that puts mozilla profile startup before embedding is initialized


author: Havoc Pennington <hp@redhat.com>
changelog:
  - drop Milan-specific features, including png10 and ac25 patches
  - copy in 1.0.5 help component to avoid large risky patch
  - remove .la files
  - drop mozilla from ia64 again
  - remove oaf file from nautilus-mozilla that was also in the base 
    package


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Relibtoolize to fix relink problems for solib components
  - Add LANG=en_US to %makeinstall as well
  - Back out previous change, force locale to en_US to prevent UTF-8 problems
  - Add workaround for intltool-merge bug on ia64


author: Havoc Pennington <hp@redhat.com>
changelog:
  - ignore the "add_to_session" preference as it only broke stuff
  - pad the left margin a bit to cope with poor word wrapping


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add a simple patch so that redhat-config-packages can disable 
    the new window behavior for mounted CDs behavior.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - require newer redhat-artwork, -menus, eel2, gnome-vfs2 to avoid
    bogus bug reports
  - add hack for HTML mime type handling in a web browser, not 
    nautilus


author: Havoc Pennington <hp@redhat.com>
changelog:
  - put button press mask in triple-click patch, maybe it will work
  - remove html-hack patch as it does nothing useful


author: Alexander Larsson <alexl@redhat.com> 2.1.5-2
changelog:
  - Add cdburn patch.
  - Remove nautilus-1.1.19-starthere-hang-hackaround.patch
  - Require nautilus-cd-burner


author: Havoc Pennington <hp@redhat.com>
changelog:
  - perl-munge the icon names in a couple desktop files
    to find redhat-network-server.png and redhat-file-manager.png.
    Upstream icon names here were weird and seem broken.


author: Alexander Larsson <alexl@redhat.com> 2.2.0.2-1
changelog:
  - Update to 2.2.0.2, fixes bg crasher
  - parallelize build
  - Added patch from cvs that fixes password hang w/ smb


author: Alexander Larsson <alexl@redhat.com> 2.2.1-2
changelog:
  - Add a patch to fix the forkbomb-under-kde bug (#81520)
  - Add a patch to fix thumbnail memory leak
  - require libXft.so.2 instead of Xft, since that changed in the XFree86 package


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Update to the latest bugfixes from cvs.
  - Fixes #84291 for nautilus, context menu duplication and some other small bugs.


author: Alexander Larsson <alexl@redhat.com> 2.3.9-1
changelog:
  - update
  - Add patch to ignore kde desktop links
  - Re-enable kdesktop detection hack.
    kde doesn't seem to support the manager selection yet


author: Mike A. Harrisn <mharris@redhat.com> 2.5.91-2
changelog:
  - Changed BuildRequires: XFree86-libs >= 4.2.99 to BuildRequires: XFree86-devel
  - Fixed BuildRoot to use _tmppath instead of /var/tmp


author: Alexander Larsson <alexl@redhat.com> - 2.8.1-2
changelog:
  - Fix open with menu on mime mismatch
  - Create desktop links ending with .desktop (#125104)
  - Remove old cruft from specfile


author: Alexander Larsson <alexl@redhat.com> - 2.8.1-3
changelog:
  - Slightly less bad error dialog when there is no handler for a file.
    Not ideal, but this change doesn't change any strings.


author: David Zeuthen <davidz@redhat.com> 2.10.0-3
changelog:
  - Include patches for desktop background memory saving (GNOME bug #169347)
  - Obsoletes: nautilus-media (#153223)


author: Matthias Clasen <mclasen@redhat.com> - 2.16.0-6
changelog:
  - Fix scripts according to the packaging guidelines
  - Require GConf2 for the scripts
  - Require pkgconfig for the -devel package


author: Alexander Larsson <alexl@redhat.com> - 2.16.2-7
changelog:
  - Look for beagle before tracker, because tracker autostarts
    This lets us support having both installed at the same time.
  - Remove buildreqs for beagle, as they are not necessary with
    the dynamic work.


author: - Bastien Nocera <bnocera@redhat.com> - 2.20.0-6
changelog:
  - Fix audio preview command-line to use decodebin so playbin doesn't
    pop up a window for videos detected as audio


author: Tomas Bzatek <tbzatek@redhat.com> - 2.21.92-2
changelog:
  - Change libbeagle .so name for libbeagle-0.3.0 in nautilus-2.21.1-dynamic-search-r2.patch (#434722)


author: Tomas Bzatek <tbzatek@redhat.com> - 2.22.0-2
changelog:
  - Don't create application/x-ext-<extension> types for known mimetypes (patch from head)
  - Fix a crash in the Properties dialog while changing owner (patch from head)


author: David Zeuthen <davidz@redhat.com> - 2.22.2-3
changelog:
  - Revert Fedora livecd mount (fix is in latest gvfs packages) and
    add a patch to avoid trying to autorun mounts that are mounted
    from outside Nautilus (#442189)


author: Tomas Bzatek <tbzatek@redhat.com> - 2.23.1-3
changelog:
  - Mask file moving to nautilus-cd-burner window as copy operation (#443944)
  - Don't allow recursive move/copy into itself (gnomebz #530720)


author: Tomas Bzatek <tbzatek@redhat.com> - 2.23.2-3
changelog:
  - Add DnD support to drop files onto archive files with help 
    of file-roller (gnomebz #377157)
  - Add fix preventing crash on bad GFileInfos (gnomebz #519743)


author: Alexander Larsson <alexl@redhat.com> - 2.24.1-2
changelog:
  - Manually check for fallback file icon since we're not
    always returning that from gio anymore (from upstream)


author: Tomas Bzatek <tbzatek@redhat.com> - 2.25.1-4
changelog:
  - Properly open new windows after long mount operation
  - Fix callback connection to the GtkMountOperation dialog


author: Matthias Clasen <mclasen@redhat.com> - 2.25.2-1
changelog:
  - Update to 2.25.2
  - Clean up Requires
  - Obsolete eel2
  - Drop hard dependency on gvfs backends. 
    These are pulled in by comps, anyway


author: Colin Walters <walters@verbum.org> - 2.91.93-2
changelog:
  - Drop --vendor from nautilus.desktop
    Vendor prefixes are pointless, and in this case breaks upstream
    components trying to reference each other via .desktop file, such
    as GNOME Shell having nautilus.desktop in its default favorite
    list.


author: Ray Strode <rstrode@redhat.com> 3.14.3-2
changelog:
  - Add backward compatible nautilus.desktop for user defined mime associations
    Related: #1174562 1235413


author: Carlos Soriano <csoriano@redhat.com> 3.14.3-8
changelog:
  - Backport fix for jp2 images crashing nautilus
  - Apply downstream translations
    Resolves: #1271297 #1272881


author: Carlos Soriano <csoriano@redhat.com> 3.14.3-9
changelog:
  - Apply downstream translations
  - Restrict icons on desktop to the primary monitor
    Resolves: #1207646 #1046876 #1272881


author: Paul W. Frields <stickster@gmail.com> - 0.4-3
changelog:
  - Rearrange Requires and BuildRequires for subpackages
  - Include default Evolution plugin in main package


author: Alexander Larsson <alexl@redhat.com> - 0.4-5
changelog:
  - Build in Core
  - Move gaim plugin into main package
  - Fix up some build requirements
  - No bluetooth on s390*


author: Matthew Barnes <mbarnes@redhat.com> - 0.8-2
changelog:
  - Update BuildRequires for evolution-data-server-devel.
  - Rebuild against evolution-data-server-1.9.1.


author: Bastien Nocera <bnocera@redhat.com> 1.1.5-2
changelog:
  - Disable the evolution plugin, it will be in Evo itself in 2.27.x
    See http://bugzilla.gnome.org/show_bug.cgi?id=579099


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - tkmib doco had #!/usr/bin/perl55
  - include snmpcheck and tkmib again (still needs some CPAN module, however).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - don't depend on /etc/init.d so that package will work with 6.2.
  - perl path fiddles no longer needed.
  - rely on brp-compress frpm rpm to compress man pages.
  - patch from ucd-snmp CVS (Wes Hardaker).
  - configure.in needs to check for rpm libraries correctly (#23033).
  - add simple logrotate script (#21399).
  - add options to create pidfile and log with syslog with addresses (#23476).


author: Matt Wilson <msw@redhat.com>
changelog:
  - configure with --enable-reentrant and added "smux" and "agentx" to
    --with-mib-modules= argument (#29626)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Updated to 4.2.1. Removed 2 obsolete patches (fromcvs and #18153)
  - Include /usr/share/snmp/snmpconf in %files


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Enabled IPv6 support (RFE #47764)
  - Hopefully final fix of snmpwalk problem (#42153). Thanks to Douglas Warzecha
    for the patch and Matt Domsch for reporting the problem.


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Removed tkmib from the package once again as we don't ship the Tk.pm CPAN
    perl module required to run it (#49363)
  - Added missing Provides for the .so.0 libraries as rpm doesn't seem to find
    those during the build anymore (it used to) (#46388)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a couple of security issues:
    o /tmp race and setgroups() privilege problem
    o Various buffer overflow and format string issues.
    o One signedness problem in ASN handling.
  - Fixed an important RFE to support bcm5820 cards. (#51125)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Final bcm5820 fix. Last one was broken.
  - Fixed bugzilla bug (#51960) where the binaries contained rpath references.


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a server segfault for snmpset operation (#53640). Thanks to Josh Giles
    and Wes Hardaker for the patch.


author: Phil Knirsch <phil@redhat.de> 4.2.3-1
changelog:
  - Update to 4.2.3 final.
  - Fixed libtool/rpath buildroot pollution problem.
  - Fixed library naming problem.


author: Phil Knirsch <pknirsch@redhat.com> 4.2.3-4
changelog:
  - Added the snmptrapd init script as per request (#49205)
  - Fixed the again broken rpm query stuff (#57444)
  - Removed all old and none-used db related stuff (libs and header checks/files)


author: Phil Knirsch <pknirsch@redhat.com> 5.0.1-5
changelog:
  - Added --enable-ucd-snmp-compatibility for compatibility with older version
    and fixed installation thereof.
  - Got rid of the perl(Tk) dependancy by removing snmpcheck.
  - Include /usr/include/ucd-snmp in the filelist.
  - Fixed a problem with the ucd-snmp/version.h file.


author: Phil Knirsch <pknirsch@redhat.com> 5.0.8-2
changelog:
  - Hack to make it build on 64bit platforms with /usr/lib64 correctly.
  - Fixed bug #85071 (leak of open descriptors for ipv6).


author: Phil Knirsch <pknirsch@redhat.com> 5.0.9-1
changelog:
  - Updated to latest upstream version net-snmp-5.0.9
  - Added patch to fix net-snmp-perl problems (#105842).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-1
changelog:
  - Updated to latest net-snmp-5.1 upstream version.
  - Tons of specfile and patch cleanup.
  - Cleaned up perl stuff (mib2c etc, see #107707).
  - Added lm_sensors support patch for x86 archs from Kaj J. Niemi (#107618).
  - Added support for custom mib paths and mibs to snmptrapd initscript (#102762)


author: Phil Knirsch <pknirsch@redhat.com> 5.1-2
changelog:
  - Included BuildPrereq on lm_sensors-devel on x86 archs (#110616).
  - Fixed deprecated initscript options (#110618).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-3
changelog:
  - Removed snmpcheck again, needs perl(Tk) which we don't ship (#111194).
  - Fixed getopt definition in include file (#111209).
  - Included Kaj J. Niemi's patch for broken perl module (#111319).
  - Included Kaj J. Niemi's patch for broken async getnext perl call (#111479).
  - Included Kaj J. Niemi's patch for broken hr_storage (#111502).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-9
changelog:
  - Reverted removal of _includir redefiniton due to php-snmp dependancy.
  - Remove SO_BSDCOMPAT setsockopt() call, deprecated.


author: Phil Knirsch <pknirsch@redhat.com> 5.1-12
changelog:
  - Hacked an ugly perl hack to get rid of perl RPATH problems.
  - Fixed 64bit patch and applied it. ;-)


author: Phil Knirsch <pknirsch@redhat.com> 5.1.1-2
changelog:
  - Added Kaj J. Niemi that fixes ipAdEntIfIndex problem (#119106)
  - Added Kaj J. Niemi to shut up memshared message for 2.6 kernel (#119203)


author: Radek Vokal <rvokal@redhat.com> 5.1.2-4
changelog:
  - New prereq for net-snmp-devel
  - lelf check removed from configure.in (#128748)
  - fixed snmpd coredump when sent SIGHUP (#127314)


author: Phil Knirsch <pknirsch@redhat.com> 5.1.2-9
changelog:
  - Droped obsolete lm-sensors patch and enabled lmSensors module
  - Marked several patches to be removed for 5.1.3


author: Radek Vokal <rvokal@redhat.com> 5.1.2-12
changelog:
  - snmpd crash with 'interfaces' directives in snmpd.conf fixed #139010
  - rather dirty patch fixing conf directory for net-snmp-config


author: Radek Vokal <rvokal@redhat.com> - 5.1.2-3
changelog:
  - patch from CVS - kill extra carriage return (#144917)
  - removed patch for interface indexing - doesn't show virtual interfaces


author: Radek Vokal <rvokal@redhat.com> - 5.2.1-5
changelog:
  - 64bit needed some changes, was causing timeouts on 64bit archs!? 
  - affects bugs #125432 and #132058


author: Radek Vokal <rvokal@redhat.com> - 5.2.1-12
changelog:
  - session free fixed, agentx modules build fine (#157851)
  - fixed dependency for net-snmp libs (#156932)


author: Radek Vokal <rvokal@redhat.com> - 5.2.2-0.rc6.1
changelog:
  - update to rc6, snmpnetstat changes due to license problems
  - persistent files in directory defined by snmp.conf persistentDir are 
    loaded at startup


author: Radek Vokal <rvokal@redhat.com> - 5.2.2-4
changelog:
  - check for header files in configure
  - patch for SNMPv3 traps / session user creation (net-snmp bz#1374087)


author: Radek Vokal <rvokal@redhat.com> 5.3-2
changelog:
  -  Security fix. Bug granting write access to read-only users 
     or communities which were configured  using the "rocommunity" 
     or "rouser" snmpd.conf tokens fixed


author: Radek Vokál <rvokal@redhat.com> 5.3-7
changelog:
  - fix parsing of /proc/diskstats
  - fix disman monitor crash
  - fix perl vendor name
  - fix OID lookup fail


author: Radek Vokal <rvokal@redhat.com> 5.3.1.pre2-1
changelog:
  - update to 5.3.1.pre2
  - fix multilib issues (#192736)
    On system with /usr/lib64 use net-snmp-config64 and net-snmp-config64.h


author: Radek Vokal <rvokal@redhat.com> 5.3.1.0-5
changelog:
  - SMUX support is still needed .. will disappear later!
  - static libs should be in devel not libs (#203571)
  - fix lm_sensors issues


author: Radek Vokál <rvokal@redhat.com> - 1:5.4-13
changelog:
  - fix overly verbose log message (#221911)
  - few minor tweaks for review - still not perfect
  - fix linking with lcrypto (#231805)


author: Jan Safranek <jsafranek@redhat.com> 5.4-14
changelog:
  - fix snmptrapd hostname logging (#238587)
  - fix udpEndpointProcess remote IP address (#236551)
  - fix -M option of net-snmp-utils (#244784)
  - default snmptrapd.conf added (#243536)
  - fix crash when multiple exec statements have the same name
    (#243536)
  - fix ugly error message when more interfaces share
    one IP address (#209861)


author: Jan Safranek <jsafranek@redhat.com> 5.4-16
changelog:
  - supported lm_sensors on ppc64 (#249255)
  - snmpconf generates config files with proper selinux context
    (#247462)
  - fix leak  in udp transport (#247771)
  - add alpha to supported archs in net-snmp-config (#246825)
  - fix hrSWInst (#250237)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-3
changelog:
  - include these tables: ip-mib/ipv4InterfaceTable
    ip-mib/ipv6InterfaceTable, ip-mib/ipAddressPrefixTable
  - fix Requires of net-snmp-devel to include lmsensors-devel on supported
    architectures


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-5
changelog:
  - move mib2c-update from net-snmp-utils to net-snmp-perl, where
    mib2c is located
  - add tkmib to net-snmp-gui package (#167933)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-6
changelog:
  - add support of lm_sensors v3
  - added procps to build dependencies (#380321)
  - removed beecrypt from dependencies
  - fixed crash on reading xen interfaces (#386611)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-9
changelog:
  - introduce /etc/sysconfig/snmpd. Use it to specify snmpd command line options.
    /etc/snmp/snmpd.options is not used anymore (#431391)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-15
changelog:
  - explicitly require lm_sensor > 3 for build (#442718)
  - create multilib net-snmp-config on multilib architectures only


author: Jan Safranek <jsafranek@redhat.com> 5.4.2-2
changelog:
  - redistribute the perl scripts to the net-snmp package,
    net-snmp-utils doesn't depend on perl now (#462484)


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-1
changelog:
  - explicitly require the right version and release of net-snmp and
    net-snmp-libs
  - update to net-snmp-5.4.2.1 to fix CVE-2008-4309


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-12
changelog:
  - make the default configuration less noisy, i.e. do not print "Connection from
    UDP:" and "Received SNMP packet(s) from UDP:" messages on each connection.
    (#509055)


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-13
changelog:
  - package cleanup, remove unnecessary patches
  - move local state file from /var/net-snmp/ to /var/lib/net-snmp


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-2
changelog:
  - introduce /etc/sysconfig/snmptrapd. Use it to specify snmptrapd command
    line options.  /etc/snmp/snmptrapd.options is not used anymore (#540799)
  - build-in ipAddressPrefixTable, ipDefaultRouterTable, ipv6ScopeZoneIndexTable,
    ipIfStatsTable, SCTP-MIB, RMON-MIB and Etherlike-MIBs
  - remove ucd5820stat helper script, it depends on get5820stats, which is not
    available in Fedora
  - move sample services ipf-mod.pl to documentation
  - remove logrotate config, snmpd logs into syslog


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-3
changelog:
  - prepare the .spec file for review
  - run automatic regression suite after the compilation of the package
    to check for obvious regressions
  - remove unnecessary package dependencies


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-4
changelog:
  - fix udpTable indexes on big-endian systems (#543352)
  - fix snmptrapd init script to survive with empty /etc/sysconfig/snmptrapd
  - lower the default log level of snmpd to get rid of the debug messages


author: Jan Safranek <jsafrane@redhat.com> - 1:5.6-5
changelog:
  - re-create /var/run/net-snmp on boot using tmpfiles.d (#656637)
  - move snmp-bridge-mib and net-snmp-cert utilities to net-snmp-perl
    subpackage, net-snmp-utils subpackage does not depend on Perl now


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7-2
changelog:
  - restored rpath in net-snmp-config output - SNMP subagent won't link
    with libsnmpagent.so without it, linker needs to know location
    of libperl.so
  - fixed check section to make tests pass on machine without DNS


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7-6
changelog:
  - added new net-snmp-agent-libs subpackage with agent libraries
    -> net-snmp-libs do not need perl and lm_sensors libs
  - removed libsnmp.so, it's not used in Fedora (#729811)
  - added README.systemd
  - added new net-snmp-sysvinit subpackage with legacy init scripts
    (#718183)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.1-1
changelog:
  - updated to 5.7.1:
    - Fixed the mib-parsing-bug introduced shortly before 5.7
    - fixed rounding errors for disk percentage calculations
    - Many other miscellaneous minor bug fixes


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.1-10
changelog:
  - Updated RPM scriplets with latest systemd-rpm macros (#850403).
  - Fixed fedora-review tool complaints.


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-3
changelog:
  - Added direct dependency on perl-devel with architectute in
    net-snmp-devel package to pull proper dependencies.


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-5
changelog:
  - Fixed snmpd in FIPS mode (#874440)
  - Removed APSL licensed code (#830796)
  - Synchronized with RHEL-6.4


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-6
changelog:
  - Removed unused patch
  - Added net-snmp-agent-libs dependency where appropriate
  - Added full relro
  - Make net-snmp-create-v3-user multilib safe


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-8
changelog:
  - Removed APSL patch (#830796)
  - fixed net-snmp-create-v3-user to have the same content on all architectures
  - /var/lib/net-snmp/mib_indexes and cert_indexes added to net-snmp-libs
    (#906761)
  - Python: fixed IPADDRESS size on 64-bit systems (#895357)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-9
changelog:
  - fixed potential memory leak on realloc failure when processing 'extend'
    option (#978384)
  - added precise enumeration of configuration files searched to
    snmp_config(5) man page (#978398)
  - set permissions of snmpd.conf and snmptrapd conf to 0600 (#919240)
  - fixed kernel threads in hrSWRunTable (#979329)
  - fixed snmpd crashing in the middle of agentx request processing when
    a subagent disconnects (#969061)
  - updated UCD-SNMP-MIB::dskTable to dynamically add/remove disks if
    'includeAllDisks' is specified in snmpd.conf (#982644)
  - fixed crash in extTable on empty command line (#955609)
  - lowered severity of few debugging messages in dot3statsTable (#915302)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-11
changelog:
  - fixed parsing of integer variable sizes (#953926, #983116)
  - added support of simfs and vzfs to hrStorageTable (#861152, #989498)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-14
changelog:
  - move tmpfiles.d config file to /usr/lib (#881218)
  - fixed dashes in net-snmp-config.h (#1038642)
  - fixed snmpd crashing on monitor trigger evaluation (#1050971)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-17
changelog:
  - fixed various error codes in Python module (#1064338)
  - fixed net-snmp-config.h header file (#1064437)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-19
changelog:
  - Fixed not-increasing OIDs in IP-FORWARD-MIB::ipCidrRouteTable (#1172013)
  - Fixed HOST-RESOURCES-MIB::hrProcessorTable on machines with >100 CPUs
    (#1070076)
  - skip 'mvfs' (ClearCase) when skipNFSInHostResources is enabled (#1086606)
  - Added clear error message when port specified in 'clientaddrr' config
    option cannot be bound (#1086925)
  - fixed proxying of out-of-tree GETNEXT requests (#1087801)
  - use python/README to net-snmp-python subpackage (#1158391)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-21
changelog:
  - Fixed crash on reloading 'exec' configuration options (#1228893)
  - Fixed CVE-2014-3565, snmptrapd died when parsing certain traps (#1209361)
  - Fixed storageUseNFS functionality in hrStorageTable (#1193006)
  - Fixed forwarding of traps with RequestID=0 in snmptrapd (#1192511)
  - Fixed hrStorageTable to contain 31 bits integers (#1192221)
  - Fixed 'clientaddr' option for UDPv6 client messages (#1190679)
  - Fixed log level of SMUX messages (#1189393)
  - Fixed UDP-MIB::udpTable index on big-endian platforms (#1184433)
  - Fixed client utilities reporting 'read_config_store open failure on
    /var/lib/net-snmp/snmpapp.conf' (#1151310)
  - Fixed snmpd crash when failed to parse SMUX message headers (#1140236)
  - Added 'diskio' option to snmpd.conf, it's possible to monitor only
    selected devices in diskIOTable (#1092308)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-23
changelog:
  - Fixed parsing of invalid variables in incoming packets (#1248414)
  - Fixed HOST-RESOURCES-MIB::hrFSAccess flag when read-only filesystem
    becomes writable (#1241897)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.7.2-24
changelog:
  - Fixed lmSensorsTable not reporting sensors with duplicate names
    (#1252053)
  - Fixed close() overhead of extend commands (#1252048)
  - Fixed out-of-bounds write in python code (#1252034)


author: Josef Ridky <jridky@redhat.com> - 1:5.7.2-27
changelog:
  - Allow clients to use UDPv6 addresses without 'udp6:' prefix (#1326850)
  - snmpd: Speed up ipAddressTable loading. (#1327240)
  - Fixed net-snmp segfault in netsnmp_copy_fd_set_to_large_fd_set (#1327200)
  - Fixed issue with net-snmp-perl dependency on net-snmp-devel (#1438875)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 1.50.
  - added slattach/plipconfig/ipmaddr/iptunnel commands.
  - enabled translated man pages.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 1.57.
  - MTU (and other) option(s) not parsed correctly (#9215).
  - allow more granularity iwth --numeric (#9129).


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - fix nstrcmp() to be correct in the case where there are many devices 
    of the same type, eg, "eth10" > "eth1"  (#61436)


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed incorrect address display for ipx (#46434).
  - Fixed wrongly installed manpage dirs (#50664).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Added inet6-lookup patch from John van Krieken (#84108).
  - Fixed outdated link in ifconfig manpage (#91287).


author: Phil Knirsch <pknirsch@redhat.com> 1.60-19
changelog:
  - Fixed trailing blank bug in hostname output (#101263).
  - Remove -O2 fir alpha (#78955).
  - Updated netstat statistic output, was still broken.


author: Phil Knirsch <pknirsch@redhat.com> 1.60-27
changelog:
  - Fixed compiler warning/error in netplug.
  - Updated to netplug-1.2.6 for security update and fixes.


author: Radek Vokal <rvokal@redhat.com> 1.60-38
changelog:
  - fixed fail to assign the specified netmask before adress is assigned
  - patch by Malita, Florin <florin.malita@glenayre.com>


author: Radek Vokal <rvokal@redhat.com> 1.60-39
changelog:
  - IBM patch for netstat -s returning negative values on 64bit arch (#144064)
  - broadcast calulated if only netmask provided (#60509)


author: Radek Vokal <rvokal@redhat.com> 1.60-40
changelog:
  - mii-tool(8) fixed, labeled as obsolete, added info (#138687)
  - netstat crashing on i64 fixed (#138804) Patch by <Andreas.Hirstius@cern.ch>


author: Radek Vokal <rvokal@redhat.com> 1.60-43
changelog:
  - don't report statistics for virtual devices (#143981) <kzak@redhat.com>
  - fixing translation headers - content type format
  - kill bitkeeper warning messages


author: Radek Vokal <rvokal@redhat.com> 1.60-44
changelog:
  - net-plug-1.2.9 - no changes, upstream included Red Hat patches
  - ether-wake-1.08 - few changes in implementation (#145718)


author: Radek Vokal <rvokal@redhat.com> 1.60-48
changelog:
  - behaviour of netstat -i option changed (#115987)
  - netstat -i shows all interface, -I<Iface> only one


author: Radek Vokal <rvokal@redhat.com> 1.60-50
changelog:
  - added mii-diag tool
  - added newer ether-wake
  - remove useless -i option from ifconfig
  - stop trimming interface names (#152457)


author: Radek Vokal <rvokal@redhat.com> 1.60-52
changelog:
  - don't show "duplicate line" warning (#143933)
  - netstat has new statistcs (#133032)
  - /etc/neplug is owned by net-tools (#130621)


author: Radek Vokal <rvokal@redhat.com> 1.60-57
changelog:
  - add note to hostname man page about gethostbyname() (#166581)
  - don't ship any rarp man page (#170537)


author: Zdenek Prikryl <zprikryl@redhat.com> - 1.60-89
changelog:
  - fixed man pages for arp (#446195)
  - fixed netstat --interfaces option (#446187)
  - fixed clearing flags in ifconfig (#450252)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-93
changelog:
  - scanf format length fix (non exploitable?) from Fabian Hugelshofer <hugelshofer2006@gmx.ch>
  - URL tag changed to http://net-tools.berlios.de/


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-95
changelog:
  - netstat - avoid name resolution for listening or established sockets (-l) by return fast. 
  - netstat - --continuous should flush stdout
  - added missing man pages (iptunnel, ipmaddr, netplug, netplug.d, netplugd.conf)
  - added note about obsolete commands to existing man pages 
  - let the user know that ifconfig can correctly show only first 8 bytes of Infiniband hw address


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-96
changelog:
  - netplug moved to separate package
  - #319981 and #322901 - minor man pages changes
  - applied changes from berlios cvs, which fix: Berlios #16232, Gentoo #283759 and polish Makefile and slattach


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-97
changelog:
  - Make "hostname -s" display host name cut at the first dot (no
    matter if the host name resolves or not) (bug #531702)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-99
changelog:
  - return defining of BuildRoot even it's no longer necessary
    (https://fedoraproject.org/wiki/Packaging:Guidelines#BuildRoot_tag)
    to silent rpmlint false warning


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-101
changelog:
  - fixed overflow patch (#551625)
  - ifconfig interface:0 del <IP> will remove the Aliased IP on IA64 (#473211)
  - interface slip: cast keepalive/outfill to unsigned long to fix warnings on 64bit hosts -- no functional changes since these only have an 8bit range anyways
  - interface: fix IPv6 parsing of interfaces with large indexes (> 255) (Debian #433543)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-102
changelog:
  - fixed statistics.c to use unsigned long long (instead of int) to handle 64 bit integers (Bug #579854, Debian #561161)
  - fixed typo in statistics.c (Bug #579855)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-116
changelog:
  - Fix mii-tool/mii-diag/ether-wake to not default to eth0 because
    since Fedora 15 network devices can have arbitrary names (#682367)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-118
changelog:
  - patch netstat to separate basename of -p only if it is absolute
    path (in order to make argv[0]="sshd pty/0" display as sshd, and not as /0).


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-120
changelog:
  - Do not mention /proc/net/socket in ifconfig(8) (#661905)
  - Merge all 'man page only fix' patches into net-tools-1.60-man.patch


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-121
changelog:
  - Added arp-ethers.service systemd unit file to run 'arp -f /etc/ethers'
    on startup of system. Don't ship default /etc/ethers (#713759)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-129.20111206git
changelog:
  - upstream git snapshot
  - reduced number of patches from 95 to 32
  - netstat -T/--notrim option is now -W/--wide


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-131.20120105git
changelog:
  - next 11 patches merged upstream
  - removed bcast.patch (seems to be fixed upstream)
  - removed netstat-p-basename.patch (upstream is not happy with it)
  - netstat-leak.patch merged into duplicate-tcp.patch


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-132.20120111git
changelog:
  - 3 patches merged upstream
  - removed 2digit.patch (#718610)
  - removed fgets.patch (probably not needed anymore)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-133.20120119git
changelog:
  - SELinux patch merged upstream
  - several page fixes merged upstream
  - mark localized man pages with %lang


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-134.20120127git
changelog:
  - Do not show interface metric in 'ifconfig', 'ifconfig -s' and 'netstat -i'.
    Spare place is used for interface name so trim_iface.patch is no longer needed.
  - No need to convert man pages to utf-8 as upstream ship them in utf-8 now.


author: Jaromír Končický <jkoncick@redhat.com> - 2.0-0.10.20130607git
changelog:
  - use all interfaces instead of default (#1003875)
  - reverted all changes on ether-wake.c and put original file


author: Jiri Popelka <jpopelka@redhat.com> - 2.0-0.13.20131004git
changelog:
  - latest snapshot (#1013530)
  - remove %ifarch alpha condition from %prep
  - improve sctp-statistics.patch (#982638#c10)


author: Michal Ruprich <mruprich@redhat.com> - 2.0-0.18.20131004git
changelog:
  - Resolves: #1063913 - netstat doesn't list sctp servers in -A mode
  - Resolves: #1257549 - netstat tool does not throw correct exit code on wrong parameter
  - Resolves: #1392910 - ifconfig inaccurately rounds exabytes


author: Laine Stump <laine@redhat.com> - 0.1.6-1
changelog:
  - New version
  - Remove patch n0001-src-dutil.c-add-missing-includes-for-stat.patch,
    included upstream


author: Laine Stump <laine@redhat.com> - 0.1.8-1
changelog:
  - Rebase to netcf-0.1.8
  - new transactional change APIs: ncf_change_(begin|commit|rollback)
  - add stdout/stderr to error text when an external program fails
  - make error reporting of failed execs more exact/correct
  - Remove unnecessary "Requires" of libxml2 and augeas from pkgconfig file
    to pulling in extra packages when building an application that uses netcf.


author: Laine Stump <laine@redhat.com> - 0.1.9-1
changelog:
  - Rebase to netcf-0.1.9
  - always add <bridge> element to bridge, even if there is no physdev present
  - don't log error if interface isn't found in kernel during status report
  - allow building with C++
  - update gnulib


author: Laine Stump <laine@redhat.com> - 0.2.1-1
changelog:
  - Rebase to netcf-0.2.1
  - update gnulib to fix broken build on systems with nwer glibc (which no
    longer provides gets()).
  - add ncftool manpage
  - interfaces are only "active" if both UP and RUNNING.
  - add "bundled(gnulib)" to specfile to indicate that we use a local
    copy of gnulib sources (used by Fedora/RHEL when determining the scope
    of security bugs).
  - Fix ipcalc_netmask, which was trimming off the last digit in
    character representations of full-length netmasks (all 4 octets
    having 3 chars each)
  - other minor bugfixes


author: Laine Stump <laine@redhat.com> - 0.2.2-1
changelog:
  - Rebase to netcf-0.2.2
  - specfile: require libnl3-devel for rpm builds on Fedora 18+ and
    RHEL7+. Likewise, force libnl1 for F17- and RHEL6.x-, even if
    libnl3-devel is installed.


author: Laine Stump <laine@redhat.com> - 0.2.3-1
changelog:
  - Rebase to netcf-0.2.3
  - eliminate calls to nl_cache_mngt_provide(), to avoid
    non-threadsafe code in libnl (and because it isn't needed
    anyway) (This non-threadsafe code could lead to a segfault)
  - portability fixes for FreeBSD
  - fix bug when a config file has two config parameters with
    identical names
  - add HACKING document
  - always bail immediately if get_augeas fails (doing otherwise
    could lead to a segfault)


author: Laine Stump <laine@redhat.com> - 0.2.3-6
changelog:
  - resolves rhbz#961184
  - wait for IFF_UP and IFF_RUNNING after calling ifup
  - resolves rhbz#1020204
  - remove extraneous quotes from BONDING_OPTS
  - resolves rhbz#1044681
  - eliminate use of uninitialized data when getting mac
  - resolves rhbz#1046594
  - support systemd based netcf transaction


author: Laine Stump <laine@redhat.com> - 0.2.3-8
changelog:
  - resolves rhbz 1060076
  - Transform STP value from yes/no to on/off
  - resolves rhbz 1060317
  - Require bridge-utils for netcf-libs in the specfile


author: Laine Stump <laine@redhat.com> - 0.2.6-1
changelog:
  - resolves rhbz#1115176
   - rebase to upstream 0.2.6
   - allow interleaved elements in interface XML schema
   - allow <link> element in vlan and bond interfaces
   - report link state/speed in interface status
   - change DHCPv6 to DHCPV6C in ifcfg files
   - max vlan id is 4095, not 4096


author: - Laine Stump <laine@redhat.com> 0.2.6-2
changelog:
  - resolves rhbz#1138196
   - report file path and reason when aug_save fails
   - resolves rhbz#1147650
   - recognize IPADDR0/PREFIX0/NETMASK0/GATEWAY0
   - use git to apply patches to source tree


author: Laine Stump <laine@redhat.com> - 0.2.8-1
changelog:
  - Rebase to netcf-0.2.8
   - resolve rhbz#1165965 - CVE-2014-8119
   - resolve rhbz#1159000
   - support multiple IPv4 addresses in interface config (redhat driver)
   - resolve rhbz#1113983
   - allow static IPv4 config simultaneous with DHCPv4 (redhat driver)
   - resolve rhbz#1170941
   - remove extra quotes from IPV6ADDR_SECONDARIES (redhat+suse drivers)
   - resolve rhbz#1090011
   - limit names of new interfaces to IFNAMSIZ characters
   - resolve rhbz#761246
   - properly parse ifcfg files with comments past column 1


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - switch to nfs-utils as the base tree
  - fix the statfs patch for the new code base
  - single package that obsoletes everything we had before (if I am to keep
    some traces of my sanity with me...)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - Fix incorrect file specifications in statd manpage.
  - Require gawk 'cause it's used in nfslock init script.


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - don't install any rquota pages in _mandir: (#39707, #44119)
  - don't try to manipulate rpc.rquotad in init scripts 
  -   unless said program actually exists: (#43340)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - "service nfs restart" should start services even if currently 
  -   not running (#59469)
  - bump version to 0.3.3-4


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added the setting of lockd ports via sysclt interface
  - Removed queue setting code since its no longer needed


author: <SteveD@RedHat.com>
changelog:
  - Removed gssd tarball and old nfsv4 patch.
  - Added new nfsv4 patches that include both the
     gssd and idmapd daemons
  - Added redhat-only v4 patch that reduces the
     static librpc.a to only contain gss rpc related
     routines (I would rather have gssd use the glibc 
     rpc routines)
  -Changed the gssd svcgssd init scripts to only
     start up if SECURE_NFS is set to 'yes' in
     /etc/sysconfig/nfs


author: <SteveD@RedHat.com>
changelog:
  - Added the addition and deletion of rpc_pipefs to /etc/fstab
  - Added the addition and deletion of module aliases to /etc/modules.conf


author: <SteveD@RedHat.com>
changelog:
  - Added the shutting down of the rpc v4 daemons.
  - Updated the Red Hat only patch with some init script changes.


author: <SteveD@RedHat.com>
changelog:
  - Made the nfs4 daemons initscripts work better when 
    sunrpc is not a module
  - added more checks to see if modules are being used.


author: <SteveD@RedHat.com>
changelog:
  - Created a pipe between the parent and child so 
    the parent process can report the correct exit
    status to the init scripts
  - Added SIGHUP processing to rpc.idmapd and the 
    rpcidmapd init script.


author: <SteveD@RedHat.com>
changelog:
  - Changed the permission on idmapd.conf to 644
  - Added mydaemon code to svcgssd
  - Updated the add_gssd.patch from upstream


author: <SteveD@RedHat.com>
changelog:
  - Removed the auto option from MOUNTD_NFS_V2 and
    MOUNTD_NFS_V3 variables. Since v2 and v3 are on
    by default, there only needs to be away of 
    turning them off.


author: <SteveD@RedHat.com>
changelog:
  - Fixed syntax error in nfs initscripts when
    NETWORKING is not defined
  - Removed sync warning on readonly exports.
  - Changed run levels in rpc initscripts.
  - Replaced modinfo with lsmod when checking
    for loaded modules.


author: <SteveD@RedHat.com>
changelog:
  - nfslock stop is now done on package removals
  - Eliminate 3 syslog messages that are logged for
    successful events.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Major clean up. 
  - Removed all unused/old patches
  - Rename and condensed a number of patches
  - Updated to CITI's nfs-utils-1.0.6-13 patches


author: <SteveD@RedHat.com>
changelog:
  - Make sure the uid/gid of nfsnobody is the
    correct value for all archs (bz# 123900)
  - Fixed some security issues found by SGI (bz# 133556)


author: <SteveD@RedHat.com
changelog:
  - Incorporate some clean up code from Ulrich Drepper (bz# 134025)
  - Fixed the chkconfig number in the rpcgssd, rpcidmapd, and 
    rpcsvcgssd initscrpts (bz# 132284)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added "$RQUOTAD_PORT" variable to nfs.init which
    allows the rpc.rquotad to use a predefined port
    (bz# 124676)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Replaced a memcopy with explicit assignments
    in getquotainfo() of rquotad to fix potential overflow
    that can occur on 64bit machines. (bz 138068)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Fix problem in idmapd that was causing "xdr error 10008"
    errors (bz 142813)
  - make sure the correct hostname is used in the SM_NOTIFY
    message that is sent from a rebooted server which has 
    multiple network interfaces. (bz 139101)

  - Changed nfslock to send lockd a -KILL signal
    when coming down. (bz 125257)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added support to rpcgssd.init and rpcsvcgssd.init scripts
    to insmod security modules.
  - Changed the nfs.init script to bring rpc.svcgssd up and down,
    since rpc.svcgssd is only needed with the NFS server is running.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-3
changelog:
  - Changed xlog to use LOG_INFO instead of LOG_DEBUG
    so debug messages will appear w/out any config
    changes to syslog.conf.
  - Reworked how /etc/exports is setup (bz 151389)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-4
changelog:
  - Fixed a compile error on x86_64 machines in the gss code.
  - Updated the statd-notify-hostname.patch to eliminate 
    a segmentation fault in rpc.statd when an network 
    interface was down. (bz 151828)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-12
changelog:
  - Changed useradd to use new -l flag (bz149407)
  - 64bit fix in gssd code (bz 163139)
  - updated broken dependencies
  - updated rquotad to compile with latest
    quota version.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-16
changelog:
  - Reworked the nfslock init script so if lockd is running
    it will be killed which is what the HA community needs. (bz 162446)
  - Stopped rpcidmapd.init from doing extra echoing when
    condstart-ed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-17
changelog:
  - Updated to latest nfs-utils code in upstream CVS tree
  - Updated libevent from 1.0b to 1.1a
  - Added libgssapi-0.4 and librpcsecgss-0.6 libs from CITI


